linux/net/mac80211/debugfs_netdev.c

779 lines
22 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/if.h>
#include <linux/if_ether.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/notifier.h>
#include <net/mac80211.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "rate.h"
#include "debugfs.h"
#include "debugfs_netdev.h"
#include "driver-ops.h"
static ssize_t ieee80211_if_read(
struct ieee80211_sub_if_data *sdata,
char __user *userbuf,
size_t count, loff_t *ppos,
ssize_t (*format)(const struct ieee80211_sub_if_data *, char *, int))
{
char buf[70];
ssize_t ret = -EINVAL;
read_lock(&dev_base_lock);
ret = (*format)(sdata, buf, sizeof(buf));
read_unlock(&dev_base_lock);
if (ret >= 0)
ret = simple_read_from_buffer(userbuf, count, ppos, buf, ret);
return ret;
}
static ssize_t ieee80211_if_write(
struct ieee80211_sub_if_data *sdata,
const char __user *userbuf,
size_t count, loff_t *ppos,
ssize_t (*write)(struct ieee80211_sub_if_data *, const char *, int))
{
char buf[64];
ssize_t ret;
if (count >= sizeof(buf))
return -E2BIG;
if (copy_from_user(buf, userbuf, count))
return -EFAULT;
buf[count] = '\0';
ret = -ENODEV;
rtnl_lock();
ret = (*write)(sdata, buf, count);
rtnl_unlock();
return ret;
}
#define IEEE80211_IF_FMT(name, field, format_string) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, char *buf, \
int buflen) \
{ \
return scnprintf(buf, buflen, format_string, sdata->field); \
}
#define IEEE80211_IF_FMT_DEC(name, field) \
IEEE80211_IF_FMT(name, field, "%d\n")
#define IEEE80211_IF_FMT_HEX(name, field) \
IEEE80211_IF_FMT(name, field, "%#x\n")
#define IEEE80211_IF_FMT_LHEX(name, field) \
IEEE80211_IF_FMT(name, field, "%#lx\n")
#define IEEE80211_IF_FMT_SIZE(name, field) \
IEEE80211_IF_FMT(name, field, "%zd\n")
#define IEEE80211_IF_FMT_HEXARRAY(name, field) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, \
char *buf, int buflen) \
{ \
char *p = buf; \
int i; \
for (i = 0; i < sizeof(sdata->field); i++) { \
p += scnprintf(p, buflen + buf - p, "%.2x ", \
sdata->field[i]); \
} \
p += scnprintf(p, buflen + buf - p, "\n"); \
return p - buf; \
}
#define IEEE80211_IF_FMT_ATOMIC(name, field) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, \
char *buf, int buflen) \
{ \
return scnprintf(buf, buflen, "%d\n", atomic_read(&sdata->field));\
}
#define IEEE80211_IF_FMT_MAC(name, field) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, char *buf, \
int buflen) \
{ \
return scnprintf(buf, buflen, "%pM\n", sdata->field); \
}
#define IEEE80211_IF_FMT_DEC_DIV_16(name, field) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, \
char *buf, int buflen) \
{ \
return scnprintf(buf, buflen, "%d\n", sdata->field / 16); \
}
#define IEEE80211_IF_FMT_JIFFIES_TO_MS(name, field) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, \
char *buf, int buflen) \
{ \
return scnprintf(buf, buflen, "%d\n", \
jiffies_to_msecs(sdata->field)); \
}
#define _IEEE80211_IF_FILE_OPS(name, _read, _write) \
static const struct file_operations name##_ops = { \
.read = (_read), \
.write = (_write), \
.open = simple_open, \
.llseek = generic_file_llseek, \
}
#define _IEEE80211_IF_FILE_R_FN(name) \
static ssize_t ieee80211_if_read_##name(struct file *file, \
char __user *userbuf, \
size_t count, loff_t *ppos) \
{ \
return ieee80211_if_read(file->private_data, \
userbuf, count, ppos, \
ieee80211_if_fmt_##name); \
}
#define _IEEE80211_IF_FILE_W_FN(name) \
static ssize_t ieee80211_if_write_##name(struct file *file, \
const char __user *userbuf, \
size_t count, loff_t *ppos) \
{ \
return ieee80211_if_write(file->private_data, userbuf, count, \
ppos, ieee80211_if_parse_##name); \
}
#define IEEE80211_IF_FILE_R(name) \
_IEEE80211_IF_FILE_R_FN(name) \
_IEEE80211_IF_FILE_OPS(name, ieee80211_if_read_##name, NULL)
#define IEEE80211_IF_FILE_W(name) \
_IEEE80211_IF_FILE_W_FN(name) \
_IEEE80211_IF_FILE_OPS(name, NULL, ieee80211_if_write_##name)
#define IEEE80211_IF_FILE_RW(name) \
_IEEE80211_IF_FILE_R_FN(name) \
_IEEE80211_IF_FILE_W_FN(name) \
_IEEE80211_IF_FILE_OPS(name, ieee80211_if_read_##name, \
ieee80211_if_write_##name)
#define IEEE80211_IF_FILE(name, field, format) \
IEEE80211_IF_FMT_##format(name, field) \
IEEE80211_IF_FILE_R(name)
/* common attributes */
IEEE80211_IF_FILE(rc_rateidx_mask_2ghz, rc_rateidx_mask[IEEE80211_BAND_2GHZ],
HEX);
IEEE80211_IF_FILE(rc_rateidx_mask_5ghz, rc_rateidx_mask[IEEE80211_BAND_5GHZ],
HEX);
IEEE80211_IF_FILE(rc_rateidx_mcs_mask_2ghz,
rc_rateidx_mcs_mask[IEEE80211_BAND_2GHZ], HEXARRAY);
IEEE80211_IF_FILE(rc_rateidx_mcs_mask_5ghz,
rc_rateidx_mcs_mask[IEEE80211_BAND_5GHZ], HEXARRAY);
static ssize_t ieee80211_if_fmt_rc_rateidx_vht_mcs_mask_2ghz(
const struct ieee80211_sub_if_data *sdata,
char *buf, int buflen)
{
int i, len = 0;
const u16 *mask = sdata->rc_rateidx_vht_mcs_mask[IEEE80211_BAND_2GHZ];
for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
len += scnprintf(buf + len, buflen - len, "%04x ", mask[i]);
len += scnprintf(buf + len, buflen - len, "\n");
return len;
}
IEEE80211_IF_FILE_R(rc_rateidx_vht_mcs_mask_2ghz);
static ssize_t ieee80211_if_fmt_rc_rateidx_vht_mcs_mask_5ghz(
const struct ieee80211_sub_if_data *sdata,
char *buf, int buflen)
{
int i, len = 0;
const u16 *mask = sdata->rc_rateidx_vht_mcs_mask[IEEE80211_BAND_5GHZ];
for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
len += scnprintf(buf + len, buflen - len, "%04x ", mask[i]);
len += scnprintf(buf + len, buflen - len, "\n");
return len;
}
IEEE80211_IF_FILE_R(rc_rateidx_vht_mcs_mask_5ghz);
IEEE80211_IF_FILE(flags, flags, HEX);
IEEE80211_IF_FILE(state, state, LHEX);
IEEE80211_IF_FILE(txpower, vif.bss_conf.txpower, DEC);
IEEE80211_IF_FILE(ap_power_level, ap_power_level, DEC);
IEEE80211_IF_FILE(user_power_level, user_power_level, DEC);
static ssize_t
ieee80211_if_fmt_hw_queues(const struct ieee80211_sub_if_data *sdata,
char *buf, int buflen)
{
int len;
len = scnprintf(buf, buflen, "AC queues: VO:%d VI:%d BE:%d BK:%d\n",
sdata->vif.hw_queue[IEEE80211_AC_VO],
sdata->vif.hw_queue[IEEE80211_AC_VI],
sdata->vif.hw_queue[IEEE80211_AC_BE],
sdata->vif.hw_queue[IEEE80211_AC_BK]);
if (sdata->vif.type == NL80211_IFTYPE_AP)
len += scnprintf(buf + len, buflen - len, "cab queue: %d\n",
sdata->vif.cab_queue);
return len;
}
IEEE80211_IF_FILE_R(hw_queues);
/* STA attributes */
IEEE80211_IF_FILE(bssid, u.mgd.bssid, MAC);
IEEE80211_IF_FILE(aid, u.mgd.aid, DEC);
IEEE80211_IF_FILE(last_beacon, u.mgd.last_beacon_signal, DEC);
IEEE80211_IF_FILE(ave_beacon, u.mgd.ave_beacon_signal, DEC_DIV_16);
IEEE80211_IF_FILE(beacon_timeout, u.mgd.beacon_timeout, JIFFIES_TO_MS);
static int ieee80211_set_smps(struct ieee80211_sub_if_data *sdata,
enum ieee80211_smps_mode smps_mode)
{
struct ieee80211_local *local = sdata->local;
int err;
if (!(local->hw.wiphy->features & NL80211_FEATURE_STATIC_SMPS) &&
smps_mode == IEEE80211_SMPS_STATIC)
return -EINVAL;
/* auto should be dynamic if in PS mode */
if (!(local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS) &&
(smps_mode == IEEE80211_SMPS_DYNAMIC ||
smps_mode == IEEE80211_SMPS_AUTOMATIC))
return -EINVAL;
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_AP)
return -EOPNOTSUPP;
sdata_lock(sdata);
if (sdata->vif.type == NL80211_IFTYPE_STATION)
err = __ieee80211_request_smps_mgd(sdata, smps_mode);
else
err = __ieee80211_request_smps_ap(sdata, smps_mode);
sdata_unlock(sdata);
return err;
}
static const char *smps_modes[IEEE80211_SMPS_NUM_MODES] = {
[IEEE80211_SMPS_AUTOMATIC] = "auto",
[IEEE80211_SMPS_OFF] = "off",
[IEEE80211_SMPS_STATIC] = "static",
[IEEE80211_SMPS_DYNAMIC] = "dynamic",
};
static ssize_t ieee80211_if_fmt_smps(const struct ieee80211_sub_if_data *sdata,
char *buf, int buflen)
{
if (sdata->vif.type == NL80211_IFTYPE_STATION)
return snprintf(buf, buflen, "request: %s\nused: %s\n",
smps_modes[sdata->u.mgd.req_smps],
smps_modes[sdata->smps_mode]);
if (sdata->vif.type == NL80211_IFTYPE_AP)
return snprintf(buf, buflen, "request: %s\nused: %s\n",
smps_modes[sdata->u.ap.req_smps],
smps_modes[sdata->smps_mode]);
return -EINVAL;
}
static ssize_t ieee80211_if_parse_smps(struct ieee80211_sub_if_data *sdata,
const char *buf, int buflen)
{
enum ieee80211_smps_mode mode;
for (mode = 0; mode < IEEE80211_SMPS_NUM_MODES; mode++) {
if (strncmp(buf, smps_modes[mode], buflen) == 0) {
int err = ieee80211_set_smps(sdata, mode);
if (!err)
return buflen;
return err;
}
}
return -EINVAL;
}
IEEE80211_IF_FILE_RW(smps);
static ssize_t ieee80211_if_parse_tkip_mic_test(
struct ieee80211_sub_if_data *sdata, const char *buf, int buflen)
{
struct ieee80211_local *local = sdata->local;
u8 addr[ETH_ALEN];
struct sk_buff *skb;
struct ieee80211_hdr *hdr;
__le16 fc;
if (!mac_pton(buf, addr))
return -EINVAL;
if (!ieee80211_sdata_running(sdata))
return -ENOTCONN;
skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 100);
if (!skb)
return -ENOMEM;
skb_reserve(skb, local->hw.extra_tx_headroom);
hdr = (struct ieee80211_hdr *) skb_put(skb, 24);
memset(hdr, 0, 24);
fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA);
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
/* DA BSSID SA */
memcpy(hdr->addr1, addr, ETH_ALEN);
memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN);
memcpy(hdr->addr3, sdata->vif.addr, ETH_ALEN);
break;
case NL80211_IFTYPE_STATION:
fc |= cpu_to_le16(IEEE80211_FCTL_TODS);
/* BSSID SA DA */
sdata_lock(sdata);
if (!sdata->u.mgd.associated) {
sdata_unlock(sdata);
dev_kfree_skb(skb);
return -ENOTCONN;
}
memcpy(hdr->addr1, sdata->u.mgd.associated->bssid, ETH_ALEN);
memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN);
memcpy(hdr->addr3, addr, ETH_ALEN);
sdata_unlock(sdata);
break;
default:
dev_kfree_skb(skb);
return -EOPNOTSUPP;
}
hdr->frame_control = fc;
/*
* Add some length to the test frame to make it look bit more valid.
* The exact contents does not matter since the recipient is required
* to drop this because of the Michael MIC failure.
*/
memset(skb_put(skb, 50), 0, 50);
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_TKIP_MIC_FAILURE;
ieee80211_tx_skb(sdata, skb);
return buflen;
}
IEEE80211_IF_FILE_W(tkip_mic_test);
static ssize_t ieee80211_if_parse_beacon_loss(
struct ieee80211_sub_if_data *sdata, const char *buf, int buflen)
{
if (!ieee80211_sdata_running(sdata) || !sdata->vif.bss_conf.assoc)
return -ENOTCONN;
ieee80211_beacon_loss(&sdata->vif);
return buflen;
}
IEEE80211_IF_FILE_W(beacon_loss);
static ssize_t ieee80211_if_fmt_uapsd_queues(
const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
{
const struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
return snprintf(buf, buflen, "0x%x\n", ifmgd->uapsd_queues);
}
static ssize_t ieee80211_if_parse_uapsd_queues(
struct ieee80211_sub_if_data *sdata, const char *buf, int buflen)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 val;
int ret;
ret = kstrtou8(buf, 0, &val);
if (ret)
return ret;
if (val & ~IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK)
return -ERANGE;
ifmgd->uapsd_queues = val;
return buflen;
}
IEEE80211_IF_FILE_RW(uapsd_queues);
static ssize_t ieee80211_if_fmt_uapsd_max_sp_len(
const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
{
const struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
return snprintf(buf, buflen, "0x%x\n", ifmgd->uapsd_max_sp_len);
}
static ssize_t ieee80211_if_parse_uapsd_max_sp_len(
struct ieee80211_sub_if_data *sdata, const char *buf, int buflen)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
unsigned long val;
int ret;
ret = kstrtoul(buf, 0, &val);
if (ret)
return -EINVAL;
if (val & ~IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK)
return -ERANGE;
ifmgd->uapsd_max_sp_len = val;
return buflen;
}
IEEE80211_IF_FILE_RW(uapsd_max_sp_len);
/* AP attributes */
IEEE80211_IF_FILE(num_mcast_sta, u.ap.num_mcast_sta, ATOMIC);
IEEE80211_IF_FILE(num_sta_ps, u.ap.ps.num_sta_ps, ATOMIC);
IEEE80211_IF_FILE(dtim_count, u.ap.ps.dtim_count, DEC);
static ssize_t ieee80211_if_fmt_num_buffered_multicast(
const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
{
return scnprintf(buf, buflen, "%u\n",
skb_queue_len(&sdata->u.ap.ps.bc_buf));
}
IEEE80211_IF_FILE_R(num_buffered_multicast);
/* IBSS attributes */
static ssize_t ieee80211_if_fmt_tsf(
const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
{
struct ieee80211_local *local = sdata->local;
u64 tsf;
tsf = drv_get_tsf(local, (struct ieee80211_sub_if_data *)sdata);
return scnprintf(buf, buflen, "0x%016llx\n", (unsigned long long) tsf);
}
static ssize_t ieee80211_if_parse_tsf(
struct ieee80211_sub_if_data *sdata, const char *buf, int buflen)
{
struct ieee80211_local *local = sdata->local;
unsigned long long tsf;
int ret;
int tsf_is_delta = 0;
if (strncmp(buf, "reset", 5) == 0) {
if (local->ops->reset_tsf) {
drv_reset_tsf(local, sdata);
wiphy_info(local->hw.wiphy, "debugfs reset TSF\n");
}
} else {
if (buflen > 10 && buf[1] == '=') {
if (buf[0] == '+')
tsf_is_delta = 1;
else if (buf[0] == '-')
tsf_is_delta = -1;
else
return -EINVAL;
buf += 2;
}
ret = kstrtoull(buf, 10, &tsf);
if (ret < 0)
return ret;
if (tsf_is_delta)
tsf = drv_get_tsf(local, sdata) + tsf_is_delta * tsf;
if (local->ops->set_tsf) {
drv_set_tsf(local, sdata, tsf);
wiphy_info(local->hw.wiphy,
"debugfs set TSF to %#018llx\n", tsf);
}
}
ieee80211_recalc_dtim(local, sdata);
return buflen;
}
IEEE80211_IF_FILE_RW(tsf);
/* WDS attributes */
IEEE80211_IF_FILE(peer, u.wds.remote_addr, MAC);
#ifdef CONFIG_MAC80211_MESH
IEEE80211_IF_FILE(estab_plinks, u.mesh.estab_plinks, ATOMIC);
/* Mesh stats attributes */
IEEE80211_IF_FILE(fwded_mcast, u.mesh.mshstats.fwded_mcast, DEC);
IEEE80211_IF_FILE(fwded_unicast, u.mesh.mshstats.fwded_unicast, DEC);
IEEE80211_IF_FILE(fwded_frames, u.mesh.mshstats.fwded_frames, DEC);
IEEE80211_IF_FILE(dropped_frames_ttl, u.mesh.mshstats.dropped_frames_ttl, DEC);
IEEE80211_IF_FILE(dropped_frames_congestion,
u.mesh.mshstats.dropped_frames_congestion, DEC);
IEEE80211_IF_FILE(dropped_frames_no_route,
u.mesh.mshstats.dropped_frames_no_route, DEC);
/* Mesh parameters */
IEEE80211_IF_FILE(dot11MeshMaxRetries,
u.mesh.mshcfg.dot11MeshMaxRetries, DEC);
IEEE80211_IF_FILE(dot11MeshRetryTimeout,
u.mesh.mshcfg.dot11MeshRetryTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshConfirmTimeout,
u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshHoldingTimeout,
u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshTTL, u.mesh.mshcfg.dot11MeshTTL, DEC);
IEEE80211_IF_FILE(element_ttl, u.mesh.mshcfg.element_ttl, DEC);
IEEE80211_IF_FILE(auto_open_plinks, u.mesh.mshcfg.auto_open_plinks, DEC);
IEEE80211_IF_FILE(dot11MeshMaxPeerLinks,
u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPactivePathTimeout,
u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPpreqMinInterval,
u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPperrMinInterval,
u.mesh.mshcfg.dot11MeshHWMPperrMinInterval, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPnetDiameterTraversalTime,
u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPmaxPREQretries,
u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC);
IEEE80211_IF_FILE(path_refresh_time,
u.mesh.mshcfg.path_refresh_time, DEC);
IEEE80211_IF_FILE(min_discovery_timeout,
u.mesh.mshcfg.min_discovery_timeout, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPRootMode,
u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC);
IEEE80211_IF_FILE(dot11MeshGateAnnouncementProtocol,
u.mesh.mshcfg.dot11MeshGateAnnouncementProtocol, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPRannInterval,
u.mesh.mshcfg.dot11MeshHWMPRannInterval, DEC);
IEEE80211_IF_FILE(dot11MeshForwarding, u.mesh.mshcfg.dot11MeshForwarding, DEC);
IEEE80211_IF_FILE(rssi_threshold, u.mesh.mshcfg.rssi_threshold, DEC);
IEEE80211_IF_FILE(ht_opmode, u.mesh.mshcfg.ht_opmode, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPactivePathToRootTimeout,
u.mesh.mshcfg.dot11MeshHWMPactivePathToRootTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshHWMProotInterval,
u.mesh.mshcfg.dot11MeshHWMProotInterval, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPconfirmationInterval,
u.mesh.mshcfg.dot11MeshHWMPconfirmationInterval, DEC);
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30 17:14:08 +00:00
IEEE80211_IF_FILE(power_mode, u.mesh.mshcfg.power_mode, DEC);
IEEE80211_IF_FILE(dot11MeshAwakeWindowDuration,
u.mesh.mshcfg.dot11MeshAwakeWindowDuration, DEC);
#endif
#define DEBUGFS_ADD_MODE(name, mode) \
debugfs_create_file(#name, mode, sdata->vif.debugfs_dir, \
sdata, &name##_ops);
#define DEBUGFS_ADD(name) DEBUGFS_ADD_MODE(name, 0400)
static void add_common_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(rc_rateidx_mask_2ghz);
DEBUGFS_ADD(rc_rateidx_mask_5ghz);
DEBUGFS_ADD(rc_rateidx_mcs_mask_2ghz);
DEBUGFS_ADD(rc_rateidx_mcs_mask_5ghz);
DEBUGFS_ADD(rc_rateidx_vht_mcs_mask_2ghz);
DEBUGFS_ADD(rc_rateidx_vht_mcs_mask_5ghz);
DEBUGFS_ADD(hw_queues);
}
static void add_sta_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(bssid);
DEBUGFS_ADD(aid);
DEBUGFS_ADD(last_beacon);
DEBUGFS_ADD(ave_beacon);
DEBUGFS_ADD(beacon_timeout);
DEBUGFS_ADD_MODE(smps, 0600);
DEBUGFS_ADD_MODE(tkip_mic_test, 0200);
DEBUGFS_ADD_MODE(beacon_loss, 0200);
DEBUGFS_ADD_MODE(uapsd_queues, 0600);
DEBUGFS_ADD_MODE(uapsd_max_sp_len, 0600);
}
static void add_ap_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(num_mcast_sta);
DEBUGFS_ADD_MODE(smps, 0600);
DEBUGFS_ADD(num_sta_ps);
DEBUGFS_ADD(dtim_count);
DEBUGFS_ADD(num_buffered_multicast);
DEBUGFS_ADD_MODE(tkip_mic_test, 0200);
}
static void add_ibss_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD_MODE(tsf, 0600);
}
static void add_wds_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(peer);
}
#ifdef CONFIG_MAC80211_MESH
static void add_mesh_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD_MODE(tsf, 0600);
DEBUGFS_ADD_MODE(estab_plinks, 0400);
}
static void add_mesh_stats(struct ieee80211_sub_if_data *sdata)
{
struct dentry *dir = debugfs_create_dir("mesh_stats",
sdata->vif.debugfs_dir);
#define MESHSTATS_ADD(name)\
debugfs_create_file(#name, 0400, dir, sdata, &name##_ops);
MESHSTATS_ADD(fwded_mcast);
MESHSTATS_ADD(fwded_unicast);
MESHSTATS_ADD(fwded_frames);
MESHSTATS_ADD(dropped_frames_ttl);
MESHSTATS_ADD(dropped_frames_no_route);
MESHSTATS_ADD(dropped_frames_congestion);
#undef MESHSTATS_ADD
}
static void add_mesh_config(struct ieee80211_sub_if_data *sdata)
{
struct dentry *dir = debugfs_create_dir("mesh_config",
sdata->vif.debugfs_dir);
#define MESHPARAMS_ADD(name) \
debugfs_create_file(#name, 0600, dir, sdata, &name##_ops);
MESHPARAMS_ADD(dot11MeshMaxRetries);
MESHPARAMS_ADD(dot11MeshRetryTimeout);
MESHPARAMS_ADD(dot11MeshConfirmTimeout);
MESHPARAMS_ADD(dot11MeshHoldingTimeout);
MESHPARAMS_ADD(dot11MeshTTL);
MESHPARAMS_ADD(element_ttl);
MESHPARAMS_ADD(auto_open_plinks);
MESHPARAMS_ADD(dot11MeshMaxPeerLinks);
MESHPARAMS_ADD(dot11MeshHWMPactivePathTimeout);
MESHPARAMS_ADD(dot11MeshHWMPpreqMinInterval);
MESHPARAMS_ADD(dot11MeshHWMPperrMinInterval);
MESHPARAMS_ADD(dot11MeshHWMPnetDiameterTraversalTime);
MESHPARAMS_ADD(dot11MeshHWMPmaxPREQretries);
MESHPARAMS_ADD(path_refresh_time);
MESHPARAMS_ADD(min_discovery_timeout);
MESHPARAMS_ADD(dot11MeshHWMPRootMode);
MESHPARAMS_ADD(dot11MeshHWMPRannInterval);
MESHPARAMS_ADD(dot11MeshForwarding);
MESHPARAMS_ADD(dot11MeshGateAnnouncementProtocol);
MESHPARAMS_ADD(rssi_threshold);
MESHPARAMS_ADD(ht_opmode);
MESHPARAMS_ADD(dot11MeshHWMPactivePathToRootTimeout);
MESHPARAMS_ADD(dot11MeshHWMProotInterval);
MESHPARAMS_ADD(dot11MeshHWMPconfirmationInterval);
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30 17:14:08 +00:00
MESHPARAMS_ADD(power_mode);
MESHPARAMS_ADD(dot11MeshAwakeWindowDuration);
#undef MESHPARAMS_ADD
}
#endif
static void add_files(struct ieee80211_sub_if_data *sdata)
{
if (!sdata->vif.debugfs_dir)
return;
DEBUGFS_ADD(flags);
DEBUGFS_ADD(state);
DEBUGFS_ADD(txpower);
DEBUGFS_ADD(user_power_level);
DEBUGFS_ADD(ap_power_level);
if (sdata->vif.type != NL80211_IFTYPE_MONITOR)
add_common_files(sdata);
switch (sdata->vif.type) {
case NL80211_IFTYPE_MESH_POINT:
#ifdef CONFIG_MAC80211_MESH
add_mesh_files(sdata);
add_mesh_stats(sdata);
add_mesh_config(sdata);
#endif
break;
case NL80211_IFTYPE_STATION:
add_sta_files(sdata);
break;
case NL80211_IFTYPE_ADHOC:
add_ibss_files(sdata);
break;
case NL80211_IFTYPE_AP:
add_ap_files(sdata);
break;
case NL80211_IFTYPE_WDS:
add_wds_files(sdata);
break;
default:
break;
}
}
void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata)
{
char buf[10+IFNAMSIZ];
sprintf(buf, "netdev:%s", sdata->name);
sdata->vif.debugfs_dir = debugfs_create_dir(buf,
sdata->local->hw.wiphy->debugfsdir);
if (sdata->vif.debugfs_dir)
sdata->debugfs.subdir_stations = debugfs_create_dir("stations",
sdata->vif.debugfs_dir);
add_files(sdata);
}
void ieee80211_debugfs_remove_netdev(struct ieee80211_sub_if_data *sdata)
{
if (!sdata->vif.debugfs_dir)
return;
debugfs_remove_recursive(sdata->vif.debugfs_dir);
sdata->vif.debugfs_dir = NULL;
sdata->debugfs.subdir_stations = NULL;
}
void ieee80211_debugfs_rename_netdev(struct ieee80211_sub_if_data *sdata)
{
struct dentry *dir;
char buf[10 + IFNAMSIZ];
dir = sdata->vif.debugfs_dir;
if (!dir)
return;
sprintf(buf, "netdev:%s", sdata->name);
if (!debugfs_rename(dir->d_parent, dir, dir->d_parent, buf))
sdata_err(sdata,
"debugfs: failed to rename debugfs dir to %s\n",
buf);
}