linux/arch/arm/boot/dts/db8500.dtsi

/*
 * Copyright 2012 Linaro Ltd
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/include/ "skeleton.dtsi"

/ {
	soc-u9500 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "stericsson,db8500";
		interrupt-parent = <&intc>;
		ranges;

		intc: interrupt-controller@a0411000 {
			compatible = "arm,cortex-a9-gic";
			#interrupt-cells = <3>;
			#address-cells = <1>;
			interrupt-controller;
			reg = <0xa0411000 0x1000>,
			      <0xa0410100 0x100>;
		};

		L2: l2-cache {
			compatible = "arm,pl310-cache";
			reg = <0xa0412000 0x1000>;
			interrupts = <0 13 4>;
			cache-unified;
			cache-level = <2>;
		};

		pmu {
			compatible = "arm,cortex-a9-pmu";
			interrupts = <0 7 0x4>;
		};

		timer@a0410600 {
			compatible = "arm,cortex-a9-twd-timer";
			reg = <0xa0410600 0x20>;
			interrupts = <1 13 0x304>;
		};

		rtc@80154000 {
			compatible = "stericsson,db8500-rtc";
			reg = <0x80154000 0x1000>;
			interrupts = <0 18 0x4>;
		};

		gpio0: gpio@8012e000 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8012e000 0x80>;
			interrupts = <0 119 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <0>;
		};

		gpio1: gpio@8012e080 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8012e080 0x80>;
			interrupts = <0 120 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <1>;
		};

		gpio2: gpio@8000e000 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8000e000 0x80>;
			interrupts = <0 121 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <2>;
		};

		gpio3: gpio@8000e080 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8000e080 0x80>;
			interrupts = <0 122 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <3>;
		};

		gpio4: gpio@8000e100 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8000e100 0x80>;
			interrupts = <0 123 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <4>;
		};

		gpio5: gpio@8000e180 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8000e180 0x80>;
			interrupts = <0 124 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <5>;
		};

		gpio6: gpio@8011e000 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8011e000 0x80>;
			interrupts = <0 125 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <6>;
		};

		gpio7: gpio@8011e080 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8011e080 0x80>;
			interrupts = <0 126 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <7>;
		};

		gpio8: gpio@a03fe000 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0xa03fe000 0x80>;
			interrupts = <0 127 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <8>;
		};

		pinctrl {
			compatible = "stericsson,nmk_pinctrl";
		};

		usb@a03e0000 {
			compatible = "stericsson,db8500-musb",
				"mentor,musb";
			reg = <0xa03e0000 0x10000>;
			interrupts = <0 23 0x4>;
		};

		dma-controller@801C0000 {
			compatible = "stericsson,db8500-dma40",
					"stericsson,dma40";
			reg = <0x801C0000 0x1000 0x40010000 0x800>;
			interrupts = <0 25 0x4>;
		};

		prcmu@80157000 {
			compatible = "stericsson,db8500-prcmu";
			reg = <0x80157000 0x1000>;
			interrupts = <0 47 0x4>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			prcmu-timer-4@80157450 {
				compatible = "stericsson,db8500-prcmu-timer-4";
				reg = <0x80157450 0xC>;
			};

			db8500-prcmu-regulators {
				compatible = "stericsson,db8500-prcmu-regulator";

				// DB8500_REGULATOR_VAPE
				db8500_vape_reg: db8500_vape {
					regulator-name = "db8500-vape";
					regulator-always-on;
				};

				// DB8500_REGULATOR_VARM
				db8500_varm_reg: db8500_varm {
					regulator-name = "db8500-varm";
				};

				// DB8500_REGULATOR_VMODEM
				db8500_vmodem_reg: db8500_vmodem {
					regulator-name = "db8500-vmodem";
				};

				// DB8500_REGULATOR_VPLL
				db8500_vpll_reg: db8500_vpll {
					regulator-name = "db8500-vpll";
				};

				// DB8500_REGULATOR_VSMPS1
				db8500_vsmps1_reg: db8500_vsmps1 {
					regulator-name = "db8500-vsmps1";
				};

				// DB8500_REGULATOR_VSMPS2
				db8500_vsmps2_reg: db8500_vsmps2 {
					regulator-name = "db8500-vsmps2";
				};

				// DB8500_REGULATOR_VSMPS3
				db8500_vsmps3_reg: db8500_vsmps3 {
					regulator-name = "db8500-vsmps3";
				};

				// DB8500_REGULATOR_VRF1
				db8500_vrf1_reg: db8500_vrf1 {
					regulator-name = "db8500-vrf1";
				};

				// DB8500_REGULATOR_SWITCH_SVAMMDSP
				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
					regulator-name = "db8500-sva-mmdsp";
				};

				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
					regulator-name = "db8500-sva-mmdsp-ret";
				};

				// DB8500_REGULATOR_SWITCH_SVAPIPE
				db8500_sva_pipe_reg: db8500_sva_pipe {
					regulator-name = "db8500_sva_pipe";
				};

				// DB8500_REGULATOR_SWITCH_SIAMMDSP
				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
					regulator-name = "db8500_sia_mmdsp";
				};

				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
					regulator-name = "db8500-sia-mmdsp-ret";
				};

				// DB8500_REGULATOR_SWITCH_SIAPIPE
				db8500_sia_pipe_reg: db8500_sia_pipe {
					regulator-name = "db8500-sia-pipe";
				};

				// DB8500_REGULATOR_SWITCH_SGA
				db8500_sga_reg: db8500_sga {
					regulator-name = "db8500-sga";
					vin-supply = <&db8500_vape_reg>;
				};

				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
					regulator-name = "db8500-b2r2-mcde";
					vin-supply = <&db8500_vape_reg>;
				};

				// DB8500_REGULATOR_SWITCH_ESRAM12
				db8500_esram12_reg: db8500_esram12 {
					regulator-name = "db8500-esram12";
				};

				// DB8500_REGULATOR_SWITCH_ESRAM12RET
				db8500_esram12_ret_reg: db8500_esram12_ret {
					regulator-name = "db8500-esram12-ret";
				};

				// DB8500_REGULATOR_SWITCH_ESRAM34
				db8500_esram34_reg: db8500_esram34 {
					regulator-name = "db8500-esram34";
				};

				// DB8500_REGULATOR_SWITCH_ESRAM34RET
				db8500_esram34_ret_reg: db8500_esram34_ret {
					regulator-name = "db8500-esram34-ret";
				};
			};

			ab8500@5 {
				compatible = "stericsson,ab8500";
				reg = <5>; /* mailbox 5 is i2c */
				interrupts = <0 40 0x4>;

				ab8500-regulators {
					compatible = "stericsson,ab8500-regulator";

					// supplies to the display/camera
					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
						regulator-name = "V-DISPLAY";
						regulator-min-microvolt = <2500000>;
						regulator-max-microvolt = <2900000>;
						regulator-boot-on;
						/* BUG: If turned off MMC will be affected. */
						regulator-always-on;
					};

					// supplies to the on-board eMMC
					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
						regulator-name = "V-eMMC1";
						regulator-min-microvolt = <1100000>;
						regulator-max-microvolt = <3300000>;
					};

					// supply for VAUX3; SDcard slots
					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
						regulator-name = "V-MMC-SD";
						regulator-min-microvolt = <1100000>;
						regulator-max-microvolt = <3300000>;
					};

					// supply for v-intcore12; VINTCORE12 LDO
					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
						regulator-name = "V-INTCORE";
					};

					// supply for tvout; gpadc; TVOUT LDO
					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
						regulator-name = "V-TVOUT";
					};

					// supply for ab8500-usb; USB LDO
					ab8500_ldo_usb_reg: ab8500_ldo_usb {
						regulator-name = "dummy";
					};

					// supply for ab8500-vaudio; VAUDIO LDO
					ab8500_ldo_audio_reg: ab8500_ldo_audio {
						regulator-name = "V-AUD";
					};

					// supply for v-anamic1 VAMic1-LDO
					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
						regulator-name = "V-AMIC1";
					};

					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
						regulator-name = "V-AMIC2";
					};

					// supply for v-dmic; VDMIC LDO
					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
						regulator-name = "V-DMIC";
					};

					// supply for U8500 CSI/DSI; VANA LDO
					ab8500_ldo_ana_reg: ab8500_ldo_ana {
						regulator-name = "V-CSI/DSI";
					};
				};
			};
		};

		i2c@80004000 {
			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
			reg = <0x80004000 0x1000>;
			interrupts = <0 21 0x4>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		i2c@80122000 {
			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
			reg = <0x80122000 0x1000>;
			interrupts = <0 22 0x4>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		i2c@80128000 {
			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
			reg = <0x80128000 0x1000>;
			interrupts = <0 55 0x4>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		i2c@80110000 {
			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
			reg = <0x80110000 0x1000>;
			interrupts = <0 12 0x4>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		i2c@8012a000 {
			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
			reg = <0x8012a000 0x1000>;
			interrupts = <0 51 0x4>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		ssp@80002000 {
			compatible = "arm,pl022", "arm,primecell";
			reg = <80002000 0x1000>;
			interrupts = <0 14 0x4>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";

			// Add one of these for each child device
			cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
				    &gpio6 22 0x4 &gpio7 0 0x4>;

		};

		uart@80120000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x80120000 0x1000>;
			interrupts = <0 11 0x4>;
			status = "disabled";
		};
		uart@80121000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x80121000 0x1000>;
			interrupts = <0 19 0x4>;
			status = "disabled";
		};
		uart@80007000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x80007000 0x1000>;
			interrupts = <0 26 0x4>;
			status = "disabled";
		};

		sdi@80126000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80126000 0x1000>;
			interrupts = <0 60 0x4>;
			status = "disabled";
		};
		sdi@80118000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80118000 0x1000>;
			interrupts = <0 50 0x4>;
			status = "disabled";
		};
		sdi@80005000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80005000 0x1000>;
			interrupts = <0 41 0x4>;
			status = "disabled";
		};
		sdi@80119000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80119000 0x1000>;
			interrupts = <0 59 0x4>;
			status = "disabled";
		};
		sdi@80114000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80114000 0x1000>;
			interrupts = <0 99 0x4>;
			status = "disabled";
		};
		sdi@80008000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80114000 0x1000>;
			interrupts = <0 100 0x4>;
			status = "disabled";
		};

		external-bus@50000000 {
			compatible = "simple-bus";
			reg = <0x50000000 0x4000000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x50000000 0x4000000>;
			status = "disabled";
		};
	};
};