linux/drivers/acpi/pci_root.c

932 lines
25 KiB
C
Raw Normal View History

/*
* pci_root.c - ACPI PCI Root Bridge Driver ($Revision: 40 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/pm.h>
PCI / ACPI / PM: Platform support for PCI PME wake-up Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett <mjg@redhat.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17 22:44:09 +00:00
#include <linux/pm_runtime.h>
#include <linux/pci.h>
#include <linux/pci-acpi.h>
PCI: Disable ASPM when _OSC control is not granted for PCIe services v3 -> v2: Added text to describe the problem v2 -> v1: Split this patch from v1 v1 : Part of: http://marc.info/?l=linux-pci&m=130042212003242&w=2 Disable ASPM when no _OSC control for PCIe services is granted by the BIOS. This is to protect systems with a buggy BIOS that did not set the ACPI FADT "ASPM Controls" bit even though the underlying HW can't do ASPM. To turn "on" ASPM the minimum the BIOS needs to do: 1. Clear the ACPI FADT "ASPM Controls" bit. 2. Support _OSC appropriately There is no _OSC Control bit for ASPM. However, we expect the BIOS to support _OSC for a Root Bridge that originates a PCIe hierarchy. If this is not the case - we are better off not enabling ASPM on that server. Commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the Platform won't provide _OSC control for PCIe) describes the above scenario. To quote verbatim from there: [The PCI SIG documentation for the _OSC OS/firmware handshaking interface states: "If the _OSC control method is absent from the scope of a host bridge device, then the operating system must not enable or attempt to use any features defined in this section for the hierarchy originated by the host bridge." The obvious interpretation of this is that the OS should not attempt to use PCIe hotplug, PME or AER - however, the specification also notes that an _OSC method is *required* for PCIe hierarchies, and experimental validation with An Alternative OS indicates that it doesn't use any PCIe functionality if the _OSC method is missing. That arguably means we shouldn't be using MSI or extended config space, but right now our problems seem to be limited to vendors being surprised when ASPM gets enabled on machines when other OSs refuse to do so. So, for now, let's just disable ASPM if the _OSC method doesn't exist or refuses to hand over PCIe capability control.] Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21 03:29:20 +00:00
#include <linux/pci-aspm.h>
#include <linux/dmar.h>
#include <linux/acpi.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
ACPI: Support _OSI("Darwin") correctly Apple hardware queries _OSI("Darwin") in order to determine whether the system is running OS X, and changes firmware behaviour based on the answer. The most obvious difference in behaviour is that Thunderbolt hardware is forcibly powered down unless the system is running OS X. The obvious solution would be to simply add Darwin to the list of supported _OSI strings, but this causes problems. Recent Apple hardware includes two separate methods for checking _OSI strings. The first will check whether Darwin is supported, and if so will exit. The second will check whether Darwin is supported, but will then continue to check for further operating systems. If a further operating system is found then later firmware code will assume that the OS is not OS X. This results in the unfortunate situation where the Thunderbolt controller is available at boot time but remains powered down after suspend. The easiest way to handle this is to special-case it in the Linux-specific OSI handling code. If we see Darwin, we should answer true and then disable all other _OSI vendor strings. The next problem is that the Apple PCI _OSC method has the following code: if (LEqual (0x01, OSDW ())) if (LAnd (LEqual (Arg0, GUID), NEXP) (do stuff) else (fail) NEXP is a value in high memory and is presumably under the control of the firmware. No methods sets it. The methods that are called in the "do stuff" path are dummies. Unless there's some additional firmware call in early boot, there's no way for this call to succeed - and even if it does, it doesn't do anything. The easiest way to handle this is simply to ignore it. We know which flags would be set, so just set them by hand if the platform is running in Darwin mode. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> [andreas.noever@gmail.com: merged two patches, do not touch ACPICA] Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-20 11:19:47 +00:00
#include <linux/dmi.h>
treewide: Consolidate Apple DMI checks We're about to amend ACPI bus scan with DMI checks whether we're running on a Mac to support Apple device properties in AML. The DMI checks are performed for every single device, adding overhead for everything x86 that isn't Apple, which is the majority. Rafael and Andy therefore request to perform the DMI match only once and cache the result. Outside of ACPI various other Apple DMI checks exist and it seems reasonable to use the cached value there as well. Rafael, Andy and Darren suggest performing the DMI check in arch code and making it available with a header in include/linux/platform_data/x86/. To this end, add early_platform_quirks() to arch/x86/kernel/quirks.c to perform the DMI check and invoke it from setup_arch(). Switch over all existing Apple DMI checks, thereby fixing two deficiencies: * They are now #defined to false on non-x86 arches and can thus be optimized away if they're located in cross-arch code. * Some of them only match "Apple Inc." but not "Apple Computer, Inc.", which is used by BIOSes released between January 2006 (when the first x86 Macs started shipping) and January 2007 (when the company name changed upon introduction of the iPhone). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Suggested-by: Darren Hart <dvhart@infradead.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 12:10:41 +00:00
#include <linux/platform_data/x86/apple.h>
ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-03 00:49:16 +00:00
#include <acpi/apei.h> /* for acpi_hest_init() */
#include "internal.h"
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_root");
#define ACPI_PCI_ROOT_CLASS "pci_bridge"
#define ACPI_PCI_ROOT_DEVICE_NAME "PCI Root Bridge"
static int acpi_pci_root_add(struct acpi_device *device,
const struct acpi_device_id *not_used);
static void acpi_pci_root_remove(struct acpi_device *device);
static int acpi_pci_root_scan_dependent(struct acpi_device *adev)
{
acpiphp_check_host_bridge(adev);
return 0;
}
#define ACPI_PCIE_REQ_SUPPORT (OSC_PCI_EXT_CONFIG_SUPPORT \
| OSC_PCI_ASPM_SUPPORT \
| OSC_PCI_CLOCK_PM_SUPPORT \
| OSC_PCI_MSI_SUPPORT)
static const struct acpi_device_id root_device_ids[] = {
{"PNP0A03", 0},
{"", 0},
};
static struct acpi_scan_handler pci_root_handler = {
.ids = root_device_ids,
.attach = acpi_pci_root_add,
.detach = acpi_pci_root_remove,
.hotplug = {
.enabled = true,
.scan_dependent = acpi_pci_root_scan_dependent,
},
};
static DEFINE_MUTEX(osc_lock);
/**
* acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
* @handle - the ACPI CA node in question.
*
* Note: we could make this API take a struct acpi_device * instead, but
* for now, it's more convenient to operate on an acpi_handle.
*/
int acpi_is_root_bridge(acpi_handle handle)
{
int ret;
struct acpi_device *device;
ret = acpi_bus_get_device(handle, &device);
if (ret)
return 0;
ret = acpi_match_device_ids(device, root_device_ids);
if (ret)
return 0;
else
return 1;
}
EXPORT_SYMBOL_GPL(acpi_is_root_bridge);
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
struct resource *res = data;
struct acpi_resource_address64 address;
acpi_status status;
status = acpi_resource_to_address64(resource, &address);
if (ACPI_FAILURE(status))
return AE_OK;
if ((address.address.address_length > 0) &&
(address.resource_type == ACPI_BUS_NUMBER_RANGE)) {
res->start = address.address.minimum;
res->end = address.address.minimum + address.address.address_length - 1;
}
return AE_OK;
}
static acpi_status try_get_root_bridge_busnr(acpi_handle handle,
struct resource *res)
{
acpi_status status;
res->start = -1;
status =
acpi_walk_resources(handle, METHOD_NAME__CRS,
get_root_bridge_busnr_callback, res);
if (ACPI_FAILURE(status))
return status;
if (res->start == -1)
return AE_ERROR;
return AE_OK;
}
struct pci_osc_bit_struct {
u32 bit;
char *desc;
};
static struct pci_osc_bit_struct pci_osc_support_bit[] = {
{ OSC_PCI_EXT_CONFIG_SUPPORT, "ExtendedConfig" },
{ OSC_PCI_ASPM_SUPPORT, "ASPM" },
{ OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
{ OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
{ OSC_PCI_MSI_SUPPORT, "MSI" },
};
static struct pci_osc_bit_struct pci_osc_control_bit[] = {
{ OSC_PCI_EXPRESS_NATIVE_HP_CONTROL, "PCIeHotplug" },
{ OSC_PCI_SHPC_NATIVE_HP_CONTROL, "SHPCHotplug" },
{ OSC_PCI_EXPRESS_PME_CONTROL, "PME" },
{ OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
{ OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
};
static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
struct pci_osc_bit_struct *table, int size)
{
char buf[80];
int i, len = 0;
struct pci_osc_bit_struct *entry;
buf[0] = '\0';
for (i = 0, entry = table; i < size; i++, entry++)
if (word & entry->bit)
len += snprintf(buf + len, sizeof(buf) - len, "%s%s",
len ? " " : "", entry->desc);
dev_info(&root->device->dev, "_OSC: %s [%s]\n", msg, buf);
}
static void decode_osc_support(struct acpi_pci_root *root, char *msg, u32 word)
{
decode_osc_bits(root, msg, word, pci_osc_support_bit,
ARRAY_SIZE(pci_osc_support_bit));
}
static void decode_osc_control(struct acpi_pci_root *root, char *msg, u32 word)
{
decode_osc_bits(root, msg, word, pci_osc_control_bit,
ARRAY_SIZE(pci_osc_control_bit));
}
static u8 pci_osc_uuid_str[] = "33DB4D5B-1FF7-401C-9657-7441C03DD766";
static acpi_status acpi_pci_run_osc(acpi_handle handle,
const u32 *capbuf, u32 *retval)
{
struct acpi_osc_context context = {
.uuid_str = pci_osc_uuid_str,
.rev = 1,
.cap.length = 12,
.cap.pointer = (void *)capbuf,
};
acpi_status status;
status = acpi_run_osc(handle, &context);
if (ACPI_SUCCESS(status)) {
*retval = *((u32 *)(context.ret.pointer + 8));
kfree(context.ret.pointer);
}
return status;
}
static acpi_status acpi_pci_query_osc(struct acpi_pci_root *root,
u32 support,
u32 *control)
{
acpi_status status;
u32 result, capbuf[3];
support &= OSC_PCI_SUPPORT_MASKS;
support |= root->osc_support_set;
capbuf[OSC_QUERY_DWORD] = OSC_QUERY_ENABLE;
capbuf[OSC_SUPPORT_DWORD] = support;
if (control) {
*control &= OSC_PCI_CONTROL_MASKS;
capbuf[OSC_CONTROL_DWORD] = *control | root->osc_control_set;
} else {
PCI / ACPI: Don't query OSC support with all possible controls Found problem on system that firmware that could handle pci aer. Firmware get error reporting after pci injecting error, before os boots. But after os boots, firmware can not get report anymore, even pci=noaer is passed. Root cause: BIOS _OSC has problem with query bit checking. It turns out that BIOS vendor is copying example code from ACPI Spec. In ACPI Spec 5.0, page 290: If (Not(And(CDW1,1))) // Query flag clear? { // Disable GPEs for features granted native control. If (And(CTRL,0x01)) // Hot plug control granted? { Store(0,HPCE) // clear the hot plug SCI enable bit Store(1,HPCS) // clear the hot plug SCI status bit } ... } When Query flag is set, And(CDW1,1) will be 1, Not(1) will return 0xfffffffe. So it will get into code path that should be for control set only. BIOS acpi code should be changed to "If (LEqual(And(CDW1,1), 0)))" Current kernel code is using _OSC query to notify firmware about support from OS and then use _OSC to set control bits. During query support, current code is using all possible controls. So will execute code that should be only for control set stage. That will have problem when pci=noaer or aer firmware_first is used. As firmware have that control set for os aer already in query support stage, but later will not os aer handling. We should avoid passing all possible controls, just use osc_control_set instead. That should workaround BIOS bugs with affected systems on the field as more bios vendors are copying sample code from ACPI spec. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-28 04:28:58 +00:00
/* Run _OSC query only with existing controls. */
capbuf[OSC_CONTROL_DWORD] = root->osc_control_set;
}
status = acpi_pci_run_osc(root->device->handle, capbuf, &result);
if (ACPI_SUCCESS(status)) {
root->osc_support_set = support;
ACPI/PCI: Do not preserve _OSC control bits returned by a query There is the assumption in acpi_pci_osc_control_set() that it is always sufficient to compare the mask of _OSC control bits to be requested with the result of an _OSC query where all of the known control bits have been checked. However, in general, that need not be the case. For example, if an _OSC feature A depends on an _OSC feature B and control of A, B plus another _OSC feature C is requested simultaneously, the BIOS may return A, B, C, while it would only return C if A and C were requested without B. That may result in passing a wrong mask of _OSC control bits to an _OSC control request, in which case the BIOS may only grant control of a subset of the requested features. Moreover, acpi_pci_run_osc() will return error code if that happens and the caller of acpi_pci_osc_control_set() will not know that it's been granted control of some _OSC features. Consequently, the system will generally not work as expected. Apart from this acpi_pci_osc_control_set() always uses the mask of _OSC control bits returned by the very first invocation of acpi_pci_query_osc(), but that is done with the second argument equal to OSC_PCI_SEGMENT_GROUPS_SUPPORT which generally happens to affect the returned _OSC control bits. For these reasons, make acpi_pci_osc_control_set() always check if control of the requested _OSC features will be granted before making the final control request. As a result, the osc_control_qry and osc_queried members of struct acpi_pci_root are not necessary any more, so drop them and remove the remaining code referring to them. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-23 21:55:59 +00:00
if (control)
*control = result;
}
return status;
}
static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags)
{
acpi_status status;
mutex_lock(&osc_lock);
status = acpi_pci_query_osc(root, flags, NULL);
mutex_unlock(&osc_lock);
return status;
}
struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
{
struct acpi_pci_root *root;
struct acpi_device *device;
if (acpi_bus_get_device(handle, &device) ||
acpi_match_device_ids(device, root_device_ids))
return NULL;
root = acpi_driver_data(device);
return root;
}
EXPORT_SYMBOL_GPL(acpi_pci_find_root);
struct acpi_handle_node {
struct list_head node;
acpi_handle handle;
};
/**
* acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev
* @handle: the handle in question
*
* Given an ACPI CA handle, the desired PCI device is located in the
* list of PCI devices.
*
* If the device is found, its reference count is increased and this
* function returns a pointer to its data structure. The caller must
* decrement the reference count by calling pci_dev_put().
* If no device is found, %NULL is returned.
*/
struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
{
int dev, fn;
unsigned long long adr;
acpi_status status;
acpi_handle phandle;
struct pci_bus *pbus;
struct pci_dev *pdev = NULL;
struct acpi_handle_node *node, *tmp;
struct acpi_pci_root *root;
LIST_HEAD(device_list);
/*
* Walk up the ACPI CA namespace until we reach a PCI root bridge.
*/
phandle = handle;
while (!acpi_is_root_bridge(phandle)) {
node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL);
if (!node)
goto out;
INIT_LIST_HEAD(&node->node);
node->handle = phandle;
list_add(&node->node, &device_list);
status = acpi_get_parent(phandle, &phandle);
if (ACPI_FAILURE(status))
goto out;
}
root = acpi_pci_find_root(phandle);
if (!root)
goto out;
pbus = root->bus;
/*
* Now, walk back down the PCI device tree until we return to our
* original handle. Assumes that everything between the PCI root
* bridge and the device we're looking for must be a P2P bridge.
*/
list_for_each_entry(node, &device_list, node) {
acpi_handle hnd = node->handle;
status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr);
if (ACPI_FAILURE(status))
goto out;
dev = (adr >> 16) & 0xffff;
fn = adr & 0xffff;
pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
if (!pdev || hnd == handle)
break;
pbus = pdev->subordinate;
pci_dev_put(pdev);
/*
* This function may be called for a non-PCI device that has a
* PCI parent (eg. a disk under a PCI SATA controller). In that
* case pdev->subordinate will be NULL for the parent.
*/
if (!pbus) {
dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n");
pdev = NULL;
break;
}
}
out:
list_for_each_entry_safe(node, tmp, &device_list, node)
kfree(node);
return pdev;
}
EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
/**
* acpi_pci_osc_control_set - Request control of PCI root _OSC features.
* @handle: ACPI handle of a PCI root bridge (or PCIe Root Complex).
* @mask: Mask of _OSC bits to request control of, place to store control mask.
* @req: Mask of _OSC bits the control of is essential to the caller.
*
* Run _OSC query for @mask and if that is successful, compare the returned
* mask of control bits with @req. If all of the @req bits are set in the
* returned mask, run _OSC request for it.
*
* The variable at the @mask address may be modified regardless of whether or
* not the function returns success. On success it will contain the mask of
* _OSC bits the BIOS has granted control of, but its contents are meaningless
* on failure.
**/
acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req)
{
struct acpi_pci_root *root;
acpi_status status = AE_OK;
u32 ctrl, capbuf[3];
if (!mask)
return AE_BAD_PARAMETER;
ctrl = *mask & OSC_PCI_CONTROL_MASKS;
if ((ctrl & req) != req)
return AE_TYPE;
root = acpi_pci_find_root(handle);
if (!root)
return AE_NOT_EXIST;
mutex_lock(&osc_lock);
*mask = ctrl | root->osc_control_set;
/* No need to evaluate _OSC if the control was already granted. */
if ((root->osc_control_set & ctrl) == ctrl)
goto out;
/* Need to check the available controls bits before requesting them. */
while (*mask) {
status = acpi_pci_query_osc(root, root->osc_support_set, mask);
if (ACPI_FAILURE(status))
goto out;
if (ctrl == *mask)
break;
decode_osc_control(root, "platform does not support",
ctrl & ~(*mask));
ctrl = *mask;
}
ACPI/PCI: Do not preserve _OSC control bits returned by a query There is the assumption in acpi_pci_osc_control_set() that it is always sufficient to compare the mask of _OSC control bits to be requested with the result of an _OSC query where all of the known control bits have been checked. However, in general, that need not be the case. For example, if an _OSC feature A depends on an _OSC feature B and control of A, B plus another _OSC feature C is requested simultaneously, the BIOS may return A, B, C, while it would only return C if A and C were requested without B. That may result in passing a wrong mask of _OSC control bits to an _OSC control request, in which case the BIOS may only grant control of a subset of the requested features. Moreover, acpi_pci_run_osc() will return error code if that happens and the caller of acpi_pci_osc_control_set() will not know that it's been granted control of some _OSC features. Consequently, the system will generally not work as expected. Apart from this acpi_pci_osc_control_set() always uses the mask of _OSC control bits returned by the very first invocation of acpi_pci_query_osc(), but that is done with the second argument equal to OSC_PCI_SEGMENT_GROUPS_SUPPORT which generally happens to affect the returned _OSC control bits. For these reasons, make acpi_pci_osc_control_set() always check if control of the requested _OSC features will be granted before making the final control request. As a result, the osc_control_qry and osc_queried members of struct acpi_pci_root are not necessary any more, so drop them and remove the remaining code referring to them. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-23 21:55:59 +00:00
if ((ctrl & req) != req) {
decode_osc_control(root, "not requesting control; platform does not support",
req & ~(ctrl));
status = AE_SUPPORT;
goto out;
}
capbuf[OSC_QUERY_DWORD] = 0;
capbuf[OSC_SUPPORT_DWORD] = root->osc_support_set;
capbuf[OSC_CONTROL_DWORD] = ctrl;
status = acpi_pci_run_osc(handle, capbuf, mask);
if (ACPI_SUCCESS(status))
root->osc_control_set = *mask;
out:
mutex_unlock(&osc_lock);
return status;
}
EXPORT_SYMBOL(acpi_pci_osc_control_set);
static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm)
{
u32 support, control, requested;
acpi_status status;
struct acpi_device *device = root->device;
acpi_handle handle = device->handle;
ACPI: Support _OSI("Darwin") correctly Apple hardware queries _OSI("Darwin") in order to determine whether the system is running OS X, and changes firmware behaviour based on the answer. The most obvious difference in behaviour is that Thunderbolt hardware is forcibly powered down unless the system is running OS X. The obvious solution would be to simply add Darwin to the list of supported _OSI strings, but this causes problems. Recent Apple hardware includes two separate methods for checking _OSI strings. The first will check whether Darwin is supported, and if so will exit. The second will check whether Darwin is supported, but will then continue to check for further operating systems. If a further operating system is found then later firmware code will assume that the OS is not OS X. This results in the unfortunate situation where the Thunderbolt controller is available at boot time but remains powered down after suspend. The easiest way to handle this is to special-case it in the Linux-specific OSI handling code. If we see Darwin, we should answer true and then disable all other _OSI vendor strings. The next problem is that the Apple PCI _OSC method has the following code: if (LEqual (0x01, OSDW ())) if (LAnd (LEqual (Arg0, GUID), NEXP) (do stuff) else (fail) NEXP is a value in high memory and is presumably under the control of the firmware. No methods sets it. The methods that are called in the "do stuff" path are dummies. Unless there's some additional firmware call in early boot, there's no way for this call to succeed - and even if it does, it doesn't do anything. The easiest way to handle this is simply to ignore it. We know which flags would be set, so just set them by hand if the platform is running in Darwin mode. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> [andreas.noever@gmail.com: merged two patches, do not touch ACPICA] Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-20 11:19:47 +00:00
/*
* Apple always return failure on _OSC calls when _OSI("Darwin") has
* been called successfully. We know the feature set supported by the
* platform, so avoid calling _OSC at all
*/
treewide: Consolidate Apple DMI checks We're about to amend ACPI bus scan with DMI checks whether we're running on a Mac to support Apple device properties in AML. The DMI checks are performed for every single device, adding overhead for everything x86 that isn't Apple, which is the majority. Rafael and Andy therefore request to perform the DMI match only once and cache the result. Outside of ACPI various other Apple DMI checks exist and it seems reasonable to use the cached value there as well. Rafael, Andy and Darren suggest performing the DMI check in arch code and making it available with a header in include/linux/platform_data/x86/. To this end, add early_platform_quirks() to arch/x86/kernel/quirks.c to perform the DMI check and invoke it from setup_arch(). Switch over all existing Apple DMI checks, thereby fixing two deficiencies: * They are now #defined to false on non-x86 arches and can thus be optimized away if they're located in cross-arch code. * Some of them only match "Apple Inc." but not "Apple Computer, Inc.", which is used by BIOSes released between January 2006 (when the first x86 Macs started shipping) and January 2007 (when the company name changed upon introduction of the iPhone). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Suggested-by: Darren Hart <dvhart@infradead.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 12:10:41 +00:00
if (x86_apple_machine) {
ACPI: Support _OSI("Darwin") correctly Apple hardware queries _OSI("Darwin") in order to determine whether the system is running OS X, and changes firmware behaviour based on the answer. The most obvious difference in behaviour is that Thunderbolt hardware is forcibly powered down unless the system is running OS X. The obvious solution would be to simply add Darwin to the list of supported _OSI strings, but this causes problems. Recent Apple hardware includes two separate methods for checking _OSI strings. The first will check whether Darwin is supported, and if so will exit. The second will check whether Darwin is supported, but will then continue to check for further operating systems. If a further operating system is found then later firmware code will assume that the OS is not OS X. This results in the unfortunate situation where the Thunderbolt controller is available at boot time but remains powered down after suspend. The easiest way to handle this is to special-case it in the Linux-specific OSI handling code. If we see Darwin, we should answer true and then disable all other _OSI vendor strings. The next problem is that the Apple PCI _OSC method has the following code: if (LEqual (0x01, OSDW ())) if (LAnd (LEqual (Arg0, GUID), NEXP) (do stuff) else (fail) NEXP is a value in high memory and is presumably under the control of the firmware. No methods sets it. The methods that are called in the "do stuff" path are dummies. Unless there's some additional firmware call in early boot, there's no way for this call to succeed - and even if it does, it doesn't do anything. The easiest way to handle this is simply to ignore it. We know which flags would be set, so just set them by hand if the platform is running in Darwin mode. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> [andreas.noever@gmail.com: merged two patches, do not touch ACPICA] Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-20 11:19:47 +00:00
root->osc_control_set = ~OSC_PCI_EXPRESS_PME_CONTROL;
decode_osc_control(root, "OS assumes control of",
root->osc_control_set);
return;
}
/*
* All supported architectures that use ACPI have support for
* PCI domains, so we indicate this in _OSC support capabilities.
*/
support = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
if (pci_ext_cfg_avail())
support |= OSC_PCI_EXT_CONFIG_SUPPORT;
if (pcie_aspm_support_enabled())
support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
if (pci_msi_enabled())
support |= OSC_PCI_MSI_SUPPORT;
decode_osc_support(root, "OS supports", support);
status = acpi_pci_osc_support(root, support);
if (ACPI_FAILURE(status)) {
dev_info(&device->dev, "_OSC failed (%s); disabling ASPM\n",
acpi_format_exception(status));
*no_aspm = 1;
return;
}
2013-04-01 21:47:39 +00:00
if (pcie_ports_disabled) {
dev_info(&device->dev, "PCIe port services disabled; not requesting _OSC control\n");
return;
}
if ((support & ACPI_PCIE_REQ_SUPPORT) != ACPI_PCIE_REQ_SUPPORT) {
decode_osc_support(root, "not requesting OS control; OS requires",
ACPI_PCIE_REQ_SUPPORT);
return;
}
control = OSC_PCI_EXPRESS_CAPABILITY_CONTROL
| OSC_PCI_EXPRESS_PME_CONTROL;
if (IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE))
control |= OSC_PCI_EXPRESS_NATIVE_HP_CONTROL;
if (pci_aer_available()) {
if (aer_acpi_firmware_first())
dev_info(&device->dev,
"PCIe AER handled by firmware\n");
else
control |= OSC_PCI_EXPRESS_AER_CONTROL;
}
requested = control;
status = acpi_pci_osc_control_set(handle, &control,
OSC_PCI_EXPRESS_CAPABILITY_CONTROL);
if (ACPI_SUCCESS(status)) {
decode_osc_control(root, "OS now controls", control);
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
2013-08-29 20:17:05 +00:00
/*
* We have ASPM control, but the FADT indicates that
* it's unsupported. Leave existing configuration
* intact and prevent the OS from touching it.
PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
2013-08-29 20:17:05 +00:00
*/
dev_info(&device->dev, "FADT indicates ASPM is unsupported, using BIOS configuration\n");
*no_aspm = 1;
PCI: Disable ASPM when _OSC control is not granted for PCIe services v3 -> v2: Added text to describe the problem v2 -> v1: Split this patch from v1 v1 : Part of: http://marc.info/?l=linux-pci&m=130042212003242&w=2 Disable ASPM when no _OSC control for PCIe services is granted by the BIOS. This is to protect systems with a buggy BIOS that did not set the ACPI FADT "ASPM Controls" bit even though the underlying HW can't do ASPM. To turn "on" ASPM the minimum the BIOS needs to do: 1. Clear the ACPI FADT "ASPM Controls" bit. 2. Support _OSC appropriately There is no _OSC Control bit for ASPM. However, we expect the BIOS to support _OSC for a Root Bridge that originates a PCIe hierarchy. If this is not the case - we are better off not enabling ASPM on that server. Commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the Platform won't provide _OSC control for PCIe) describes the above scenario. To quote verbatim from there: [The PCI SIG documentation for the _OSC OS/firmware handshaking interface states: "If the _OSC control method is absent from the scope of a host bridge device, then the operating system must not enable or attempt to use any features defined in this section for the hierarchy originated by the host bridge." The obvious interpretation of this is that the OS should not attempt to use PCIe hotplug, PME or AER - however, the specification also notes that an _OSC method is *required* for PCIe hierarchies, and experimental validation with An Alternative OS indicates that it doesn't use any PCIe functionality if the _OSC method is missing. That arguably means we shouldn't be using MSI or extended config space, but right now our problems seem to be limited to vendors being surprised when ASPM gets enabled on machines when other OSs refuse to do so. So, for now, let's just disable ASPM if the _OSC method doesn't exist or refuses to hand over PCIe capability control.] Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21 03:29:20 +00:00
}
} else {
decode_osc_control(root, "OS requested", requested);
decode_osc_control(root, "platform willing to grant", control);
dev_info(&device->dev, "_OSC failed (%s); disabling ASPM\n",
acpi_format_exception(status));
/*
* We want to disable ASPM here, but aspm_disabled
* needs to remain in its state from boot so that we
* properly handle PCIe 1.1 devices. So we set this
* flag here, to defer the action until after the ACPI
* root scan.
*/
*no_aspm = 1;
}
}
static int acpi_pci_root_add(struct acpi_device *device,
const struct acpi_device_id *not_used)
{
unsigned long long segment, bus;
acpi_status status;
int result;
struct acpi_pci_root *root;
acpi_handle handle = device->handle;
int no_aspm = 0;
bool hotadd = system_state == SYSTEM_RUNNING;
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
return -ENOMEM;
segment = 0;
status = acpi_evaluate_integer(handle, METHOD_NAME__SEG, NULL,
&segment);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
dev_err(&device->dev, "can't evaluate _SEG\n");
result = -ENODEV;
goto end;
}
/* Check _CRS first, then _BBN. If no _BBN, default to zero. */
root->secondary.flags = IORESOURCE_BUS;
status = try_get_root_bridge_busnr(handle, &root->secondary);
if (ACPI_FAILURE(status)) {
/*
* We need both the start and end of the downstream bus range
* to interpret _CBA (MMCONFIG base address), so it really is
* supposed to be in _CRS. If we don't find it there, all we
* can do is assume [_BBN-0xFF] or [0-0xFF].
*/
root->secondary.end = 0xFF;
dev_warn(&device->dev,
FW_BUG "no secondary bus range in _CRS\n");
status = acpi_evaluate_integer(handle, METHOD_NAME__BBN,
NULL, &bus);
if (ACPI_SUCCESS(status))
root->secondary.start = bus;
else if (status == AE_NOT_FOUND)
root->secondary.start = 0;
else {
dev_err(&device->dev, "can't evaluate _BBN\n");
result = -ENODEV;
goto end;
}
}
root->device = device;
root->segment = segment & 0xFFFF;
strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
device->driver_data = root;
if (hotadd && dmar_device_add(handle)) {
result = -ENXIO;
goto end;
}
pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
acpi_device_name(device), acpi_device_bid(device),
root->segment, &root->secondary);
root->mcfg_addr = acpi_pci_root_get_mcfg_addr(handle);
negotiate_os_control(root, &no_aspm);
PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
2013-08-29 20:17:05 +00:00
/*
* TBD: Need PCI interface for enumeration/configuration of roots.
*/
/*
* Scan the Root Bridge
* --------------------
* Must do this prior to any attempt to bind the root device, as the
* PCI namespace does not get created until this call is made (and
* thus the root bridge's pci_dev does not exist).
*/
root->bus = pci_acpi_scan_root(root);
if (!root->bus) {
dev_err(&device->dev,
"Bus %04x:%02x not present in PCI namespace\n",
root->segment, (unsigned int)root->secondary.start);
device->driver_data = NULL;
PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
2013-08-29 20:17:05 +00:00
result = -ENODEV;
goto remove_dmar;
PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
2013-08-29 20:17:05 +00:00
}
if (no_aspm)
pcie_no_aspm();
pci_acpi_add_bus_pm_notifier(device);
device_set_wakeup_capable(root->bus->bridge, device->wakeup.flags.valid);
PCI / ACPI / PM: Platform support for PCI PME wake-up Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett <mjg@redhat.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17 22:44:09 +00:00
if (hotadd) {
pcibios_resource_survey_bus(root->bus);
pci_assign_unassigned_root_bus_resources(root->bus);
/*
* This is only called for the hotadd case. For the boot-time
* case, we need to wait until after PCI initialization in
* order to deal with IOAPICs mapped in on a PCI BAR.
*
* This is currently x86-specific, because acpi_ioapic_add()
* is an empty function without CONFIG_ACPI_HOTPLUG_IOAPIC.
* And CONFIG_ACPI_HOTPLUG_IOAPIC depends on CONFIG_X86_IO_APIC
* (see drivers/acpi/Kconfig).
*/
acpi_ioapic_add(root->device->handle);
}
pci_lock_rescan_remove();
pci_bus_add_devices(root->bus);
pci_unlock_rescan_remove();
return 1;
remove_dmar:
if (hotadd)
dmar_device_remove(handle);
end:
kfree(root);
return result;
}
static void acpi_pci_root_remove(struct acpi_device *device)
{
struct acpi_pci_root *root = acpi_driver_data(device);
pci_lock_rescan_remove();
pci_stop_root_bus(root->bus);
pci_ioapic_remove(root);
device_set_wakeup_capable(root->bus->bridge, false);
PCI / ACPI / PM: Platform support for PCI PME wake-up Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett <mjg@redhat.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17 22:44:09 +00:00
pci_acpi_remove_bus_pm_notifier(device);
pci_remove_root_bus(root->bus);
WARN_ON(acpi_ioapic_remove(root));
dmar_device_remove(device->handle);
pci_unlock_rescan_remove();
kfree(root);
}
/*
* Following code to support acpi_pci_root_create() is copied from
* arch/x86/pci/acpi.c and modified so it could be reused by x86, IA64
* and ARM64.
*/
static void acpi_pci_root_validate_resources(struct device *dev,
struct list_head *resources,
unsigned long type)
{
LIST_HEAD(list);
struct resource *res1, *res2, *root = NULL;
struct resource_entry *tmp, *entry, *entry2;
BUG_ON((type & (IORESOURCE_MEM | IORESOURCE_IO)) == 0);
root = (type & IORESOURCE_MEM) ? &iomem_resource : &ioport_resource;
list_splice_init(resources, &list);
resource_list_for_each_entry_safe(entry, tmp, &list) {
bool free = false;
resource_size_t end;
res1 = entry->res;
if (!(res1->flags & type))
goto next;
/* Exclude non-addressable range or non-addressable portion */
end = min(res1->end, root->end);
if (end <= res1->start) {
dev_info(dev, "host bridge window %pR (ignored, not CPU addressable)\n",
res1);
free = true;
goto next;
} else if (res1->end != end) {
dev_info(dev, "host bridge window %pR ([%#llx-%#llx] ignored, not CPU addressable)\n",
res1, (unsigned long long)end + 1,
(unsigned long long)res1->end);
res1->end = end;
}
resource_list_for_each_entry(entry2, resources) {
res2 = entry2->res;
if (!(res2->flags & type))
continue;
/*
* I don't like throwing away windows because then
* our resources no longer match the ACPI _CRS, but
* the kernel resource tree doesn't allow overlaps.
*/
if (resource_overlaps(res1, res2)) {
res2->start = min(res1->start, res2->start);
res2->end = max(res1->end, res2->end);
dev_info(dev, "host bridge window expanded to %pR; %pR ignored\n",
res2, res1);
free = true;
goto next;
}
}
next:
resource_list_del(entry);
if (free)
resource_list_free_entry(entry);
else
resource_list_add_tail(entry, resources);
}
}
static void acpi_pci_root_remap_iospace(struct fwnode_handle *fwnode,
struct resource_entry *entry)
{
#ifdef PCI_IOBASE
struct resource *res = entry->res;
resource_size_t cpu_addr = res->start;
resource_size_t pci_addr = cpu_addr - entry->offset;
resource_size_t length = resource_size(res);
unsigned long port;
if (pci_register_io_range(fwnode, cpu_addr, length))
goto err;
port = pci_address_to_pio(cpu_addr);
if (port == (unsigned long)-1)
goto err;
res->start = port;
res->end = port + length - 1;
entry->offset = port - pci_addr;
if (pci_remap_iospace(res, cpu_addr) < 0)
goto err;
pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res);
return;
err:
res->flags |= IORESOURCE_DISABLED;
#endif
}
int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info)
{
int ret;
struct list_head *list = &info->resources;
struct acpi_device *device = info->bridge;
struct resource_entry *entry, *tmp;
unsigned long flags;
flags = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT;
ret = acpi_dev_get_resources(device, list,
acpi_dev_filter_resource_type_cb,
(void *)flags);
if (ret < 0)
dev_warn(&device->dev,
"failed to parse _CRS method, error code %d\n", ret);
else if (ret == 0)
dev_dbg(&device->dev,
"no IO and memory resources present in _CRS\n");
else {
resource_list_for_each_entry_safe(entry, tmp, list) {
if (entry->res->flags & IORESOURCE_IO)
acpi_pci_root_remap_iospace(&device->fwnode,
entry);
if (entry->res->flags & IORESOURCE_DISABLED)
resource_list_destroy_entry(entry);
else
entry->res->name = info->name;
}
acpi_pci_root_validate_resources(&device->dev, list,
IORESOURCE_MEM);
acpi_pci_root_validate_resources(&device->dev, list,
IORESOURCE_IO);
}
return ret;
}
static void pci_acpi_root_add_resources(struct acpi_pci_root_info *info)
{
struct resource_entry *entry, *tmp;
struct resource *res, *conflict, *root = NULL;
resource_list_for_each_entry_safe(entry, tmp, &info->resources) {
res = entry->res;
if (res->flags & IORESOURCE_MEM)
root = &iomem_resource;
else if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
else
continue;
/*
* Some legacy x86 host bridge drivers use iomem_resource and
* ioport_resource as default resource pool, skip it.
*/
if (res == root)
continue;
conflict = insert_resource_conflict(root, res);
if (conflict) {
dev_info(&info->bridge->dev,
"ignoring host bridge window %pR (conflicts with %s %pR)\n",
res, conflict->name, conflict);
resource_list_destroy_entry(entry);
}
}
}
static void __acpi_pci_root_release_info(struct acpi_pci_root_info *info)
{
struct resource *res;
struct resource_entry *entry, *tmp;
if (!info)
return;
resource_list_for_each_entry_safe(entry, tmp, &info->resources) {
res = entry->res;
if (res->parent &&
(res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
release_resource(res);
resource_list_destroy_entry(entry);
}
info->ops->release_info(info);
}
static void acpi_pci_root_release_info(struct pci_host_bridge *bridge)
{
struct resource *res;
struct resource_entry *entry;
resource_list_for_each_entry(entry, &bridge->windows) {
res = entry->res;
if (res->flags & IORESOURCE_IO)
pci_unmap_iospace(res);
if (res->parent &&
(res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
release_resource(res);
}
__acpi_pci_root_release_info(bridge->release_data);
}
struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
struct acpi_pci_root_ops *ops,
struct acpi_pci_root_info *info,
void *sysdata)
{
int ret, busnum = root->secondary.start;
struct acpi_device *device = root->device;
int node = acpi_get_node(device->handle);
struct pci_bus *bus;
struct pci_host_bridge *host_bridge;
info->root = root;
info->bridge = device;
info->ops = ops;
INIT_LIST_HEAD(&info->resources);
snprintf(info->name, sizeof(info->name), "PCI Bus %04x:%02x",
root->segment, busnum);
if (ops->init_info && ops->init_info(info))
goto out_release_info;
if (ops->prepare_resources)
ret = ops->prepare_resources(info);
else
ret = acpi_pci_probe_root_resources(info);
if (ret < 0)
goto out_release_info;
pci_acpi_root_add_resources(info);
pci_add_resource(&info->resources, &root->secondary);
bus = pci_create_root_bus(NULL, busnum, ops->pci_ops,
sysdata, &info->resources);
if (!bus)
goto out_release_info;
host_bridge = to_pci_host_bridge(bus->bridge);
if (!(root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
host_bridge->native_pcie_hotplug = 0;
if (!(root->osc_control_set & OSC_PCI_EXPRESS_AER_CONTROL))
host_bridge->native_aer = 0;
if (!(root->osc_control_set & OSC_PCI_EXPRESS_PME_CONTROL))
host_bridge->native_pme = 0;
pci_scan_child_bus(bus);
pci_set_host_bridge_release(host_bridge, acpi_pci_root_release_info,
info);
if (node != NUMA_NO_NODE)
dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
return bus;
out_release_info:
__acpi_pci_root_release_info(info);
return NULL;
}
void __init acpi_pci_root_init(void)
{
acpi_hest_init();
if (acpi_pci_disabled)
return;
pci_acpi_crs_quirks();
acpi_scan_add_handler_with_hotplug(&pci_root_handler, "pci_root");
}