Files
linux/drivers/gpu/drm/msm/msm_kms.h

223 lines
6.6 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-only */
/*
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
* Copyright (C) 2013 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*/
#ifndef __MSM_KMS_H__
#define __MSM_KMS_H__
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include "msm_drv.h"
#define MAX_PLANE 4
/* As there are different display controller blocks depending on the
* snapdragon version, the kms support is split out and the appropriate
* implementation is loaded at runtime. The kms module is responsible
* for constructing the appropriate planes/crtcs/encoders/connectors.
*/
struct msm_kms_funcs {
/* hw initialization: */
int (*hw_init)(struct msm_kms *kms);
/* irq handling: */
void (*irq_preinstall)(struct msm_kms *kms);
int (*irq_postinstall)(struct msm_kms *kms);
void (*irq_uninstall)(struct msm_kms *kms);
irqreturn_t (*irq)(struct msm_kms *kms);
int (*enable_vblank)(struct msm_kms *kms, struct drm_crtc *crtc);
void (*disable_vblank)(struct msm_kms *kms, struct drm_crtc *crtc);
/*
* Atomic commit handling:
*
* Note that in the case of async commits, the funcs which take
* a crtc_mask (ie. ->flush_commit(), and ->complete_commit())
* might not be evenly balanced with ->prepare_commit(), however
* each crtc that effected by a ->prepare_commit() (potentially
* multiple times) will eventually (at end of vsync period) be
* flushed and completed.
*
* This has some implications about tracking of cleanup state,
* for example SMP blocks to release after commit completes. Ie.
* cleanup state should be also duplicated in the various
* duplicate_state() methods, as the current cleanup state at
* ->complete_commit() time may have accumulated cleanup work
* from multiple commits.
*/
/**
* Enable/disable power/clks needed for hw access done in other
* commit related methods.
*
* If mdp4 is migrated to runpm, we could probably drop these
* and use runpm directly.
*/
void (*enable_commit)(struct msm_kms *kms);
void (*disable_commit)(struct msm_kms *kms);
/**
* If the kms backend supports async commit, it should implement
* this method to return the time of the next vsync. This is
* used to determine a time slightly before vsync, for the async
* commit timer to run and complete an async commit.
*/
ktime_t (*vsync_time)(struct msm_kms *kms, struct drm_crtc *crtc);
/**
* Prepare for atomic commit. This is called after any previous
* (async or otherwise) commit has completed.
*/
void (*prepare_commit)(struct msm_kms *kms, struct drm_atomic_state *state);
/**
* Flush an atomic commit. This is called after the hardware
* updates have already been pushed down to effected planes/
* crtcs/encoders/connectors.
*/
void (*flush_commit)(struct msm_kms *kms, unsigned crtc_mask);
/**
* Wait for any in-progress flush to complete on the specified
* crtcs. This should not block if there is no in-progress
* commit (ie. don't just wait for a vblank), as it will also
* be called before ->prepare_commit() to ensure any potential
* "async" commit has completed.
*/
void (*wait_flush)(struct msm_kms *kms, unsigned crtc_mask);
/**
* Clean up after commit is completed. This is called after
* ->wait_flush(), to give the backend a chance to do any
* post-commit cleanup.
*/
void (*complete_commit)(struct msm_kms *kms, unsigned crtc_mask);
/*
* Format handling:
*/
/* get msm_format w/ optional format modifiers from drm_mode_fb_cmd2 */
const struct msm_format *(*get_format)(struct msm_kms *kms,
const uint32_t format,
const uint64_t modifiers);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
/* do format checking on format modified through fb_cmd2 modifiers */
int (*check_modified_format)(const struct msm_kms *kms,
const struct msm_format *msm_fmt,
const struct drm_mode_fb_cmd2 *cmd,
struct drm_gem_object **bos);
/* misc: */
long (*round_pixclk)(struct msm_kms *kms, unsigned long rate,
struct drm_encoder *encoder);
int (*set_split_display)(struct msm_kms *kms,
struct drm_encoder *encoder,
struct drm_encoder *slave_encoder,
bool is_cmd_mode);
void (*set_encoder_mode)(struct msm_kms *kms,
struct drm_encoder *encoder,
bool cmd_mode);
/* cleanup: */
void (*destroy)(struct msm_kms *kms);
#ifdef CONFIG_DEBUG_FS
/* debugfs: */
int (*debugfs_init)(struct msm_kms *kms, struct drm_minor *minor);
#endif
};
struct msm_kms;
/*
* A per-crtc timer for pending async atomic flushes. Scheduled to expire
* shortly before vblank to flush pending async updates.
*/
struct msm_pending_timer {
struct hrtimer timer;
struct kthread_work work;
struct kthread_worker *worker;
struct msm_kms *kms;
unsigned crtc_idx;
};
struct msm_kms {
const struct msm_kms_funcs *funcs;
struct drm_device *dev;
/* irq number to be passed on to drm_irq_install */
int irq;
/* mapper-id used to request GEM buffer mapped for scanout: */
struct msm_gem_address_space *aspace;
/*
* For async commit, where ->flush_commit() and later happens
* from the crtc's pending_timer close to end of the frame:
*/
struct mutex commit_lock[MAX_CRTCS];
drm/msm/kms: Make a lock_class_key for each crtc mutex Lockdep complains about an AA deadlock when rebooting the device. base-commit: 19c329f6808995b142b3966301f217c831e7cf31 ============================================ WARNING: possible recursive locking detected 5.4.91 #1 Not tainted -------------------------------------------- reboot/5213 is trying to acquire lock: ffffff80d13391b0 (&kms->commit_lock[i]){+.+.}, at: lock_crtcs+0x60/0xa4 but task is already holding lock: ffffff80d1339110 (&kms->commit_lock[i]){+.+.}, at: lock_crtcs+0x60/0xa4 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&kms->commit_lock[i]); lock(&kms->commit_lock[i]); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by reboot/5213: __arm64_sys_reboot+0x148/0x2a0 device_shutdown+0x10c/0x2c4 drm_atomic_helper_shutdown+0x48/0xfc modeset_lock+0x120/0x24c lock_crtcs+0x60/0xa4 stack backtrace: CPU: 4 PID: 5213 Comm: reboot Not tainted 5.4.91 #1 Hardware name: Google Pompom (rev1) with LTE (DT) Call trace: dump_backtrace+0x0/0x1dc show_stack+0x24/0x30 dump_stack+0xfc/0x1a8 __lock_acquire+0xcd0/0x22b8 lock_acquire+0x1ec/0x240 __mutex_lock_common+0xe0/0xc84 mutex_lock_nested+0x48/0x58 lock_crtcs+0x60/0xa4 msm_atomic_commit_tail+0x348/0x570 commit_tail+0xdc/0x178 drm_atomic_helper_commit+0x160/0x168 drm_atomic_commit+0x68/0x80 This is because lockdep thinks all the locks taken in lock_crtcs() are the same lock, when they actually aren't. That's because we call mutex_init() in msm_kms_init() and that assigns one static key for every lock initialized in this loop. Let's allocate a dynamic number of lock_class_keys and assign them to each lock so that lockdep can figure out an AA deadlock isn't possible here. Fixes: b3d91800d9ac ("drm/msm: Fix race condition in msm driver with async layer updates") Cc: Krishna Manikandan <mkrishn@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-28 09:09:29 -08:00
struct lock_class_key commit_lock_keys[MAX_CRTCS];
unsigned pending_crtc_mask;
struct msm_pending_timer pending_timers[MAX_CRTCS];
};
static inline int msm_kms_init(struct msm_kms *kms,
const struct msm_kms_funcs *funcs)
{
unsigned i, ret;
drm/msm/kms: Make a lock_class_key for each crtc mutex Lockdep complains about an AA deadlock when rebooting the device. base-commit: 19c329f6808995b142b3966301f217c831e7cf31 ============================================ WARNING: possible recursive locking detected 5.4.91 #1 Not tainted -------------------------------------------- reboot/5213 is trying to acquire lock: ffffff80d13391b0 (&kms->commit_lock[i]){+.+.}, at: lock_crtcs+0x60/0xa4 but task is already holding lock: ffffff80d1339110 (&kms->commit_lock[i]){+.+.}, at: lock_crtcs+0x60/0xa4 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&kms->commit_lock[i]); lock(&kms->commit_lock[i]); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by reboot/5213: __arm64_sys_reboot+0x148/0x2a0 device_shutdown+0x10c/0x2c4 drm_atomic_helper_shutdown+0x48/0xfc modeset_lock+0x120/0x24c lock_crtcs+0x60/0xa4 stack backtrace: CPU: 4 PID: 5213 Comm: reboot Not tainted 5.4.91 #1 Hardware name: Google Pompom (rev1) with LTE (DT) Call trace: dump_backtrace+0x0/0x1dc show_stack+0x24/0x30 dump_stack+0xfc/0x1a8 __lock_acquire+0xcd0/0x22b8 lock_acquire+0x1ec/0x240 __mutex_lock_common+0xe0/0xc84 mutex_lock_nested+0x48/0x58 lock_crtcs+0x60/0xa4 msm_atomic_commit_tail+0x348/0x570 commit_tail+0xdc/0x178 drm_atomic_helper_commit+0x160/0x168 drm_atomic_commit+0x68/0x80 This is because lockdep thinks all the locks taken in lock_crtcs() are the same lock, when they actually aren't. That's because we call mutex_init() in msm_kms_init() and that assigns one static key for every lock initialized in this loop. Let's allocate a dynamic number of lock_class_keys and assign them to each lock so that lockdep can figure out an AA deadlock isn't possible here. Fixes: b3d91800d9ac ("drm/msm: Fix race condition in msm driver with async layer updates") Cc: Krishna Manikandan <mkrishn@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-28 09:09:29 -08:00
for (i = 0; i < ARRAY_SIZE(kms->commit_lock); i++) {
lockdep_register_key(&kms->commit_lock_keys[i]);
__mutex_init(&kms->commit_lock[i], "&kms->commit_lock[i]",
&kms->commit_lock_keys[i]);
}
kms->funcs = funcs;
for (i = 0; i < ARRAY_SIZE(kms->pending_timers); i++) {
ret = msm_atomic_init_pending_timer(&kms->pending_timers[i], kms, i);
if (ret) {
return ret;
}
}
return 0;
}
static inline void msm_kms_destroy(struct msm_kms *kms)
{
unsigned i;
for (i = 0; i < ARRAY_SIZE(kms->pending_timers); i++)
msm_atomic_destroy_pending_timer(&kms->pending_timers[i]);
}
struct msm_kms *mdp4_kms_init(struct drm_device *dev);
struct msm_kms *mdp5_kms_init(struct drm_device *dev);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
struct msm_kms *dpu_kms_init(struct drm_device *dev);
struct msm_mdss_funcs {
int (*enable)(struct msm_mdss *mdss);
int (*disable)(struct msm_mdss *mdss);
void (*destroy)(struct drm_device *dev);
};
struct msm_mdss {
struct drm_device *dev;
const struct msm_mdss_funcs *funcs;
};
int mdp5_mdss_init(struct drm_device *dev);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
int dpu_mdss_init(struct drm_device *dev);
#define for_each_crtc_mask(dev, crtc, crtc_mask) \
drm_for_each_crtc(crtc, dev) \
for_each_if (drm_crtc_mask(crtc) & (crtc_mask))
#define for_each_crtc_mask_reverse(dev, crtc, crtc_mask) \
drm_for_each_crtc_reverse(crtc, dev) \
for_each_if (drm_crtc_mask(crtc) & (crtc_mask))
#endif /* __MSM_KMS_H__ */