forked from Minki/linux
683 lines
25 KiB
C
683 lines
25 KiB
C
|
/*
|
||
|
|
3w-9xxx.h -- 3ware 9000 Storage Controller device driver for Linux.
|
||
|
|
|
||
|
|
Written By: Adam Radford <linuxraid@amcc.com>
|
||
|
|
|
||
|
|
Copyright (C) 2004-2005 Applied Micro Circuits Corporation.
|
||
|
|
|
||
|
|
This program is free software; you can redistribute it and/or modify
|
||
|
|
it under the terms of the GNU General Public License as published by
|
||
|
|
the Free Software Foundation; version 2 of the License.
|
||
|
|
|
||
|
|
This program is distributed in the hope that it will be useful,
|
||
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
GNU General Public License for more details.
|
||
|
|
|
||
|
|
NO WARRANTY
|
||
|
|
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
|
||
|
|
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
|
||
|
|
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
|
||
|
|
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
|
||
|
|
solely responsible for determining the appropriateness of using and
|
||
|
|
distributing the Program and assumes all risks associated with its
|
||
|
|
exercise of rights under this Agreement, including but not limited to
|
||
|
|
the risks and costs of program errors, damage to or loss of data,
|
||
|
|
programs or equipment, and unavailability or interruption of operations.
|
||
|
|
|
||
|
|
DISCLAIMER OF LIABILITY
|
||
|
|
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
|
||
|
|
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
|
||
|
|
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
||
|
|
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
||
|
|
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
|
||
|
|
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
|
||
|
|
|
||
|
|
You should have received a copy of the GNU General Public License
|
||
|
|
along with this program; if not, write to the Free Software
|
||
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
|
|
|
||
|
|
Bugs/Comments/Suggestions should be mailed to:
|
||
|
|
linuxraid@amcc.com
|
||
|
|
|
||
|
|
For more information, goto:
|
||
|
|
http://www.amcc.com
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef _3W_9XXX_H
|
||
|
|
#define _3W_9XXX_H
|
||
|
|
|
||
|
|
/* AEN string type */
|
||
|
|
typedef struct TAG_twa_message_type {
|
||
|
|
unsigned int code;
|
||
|
|
char* text;
|
||
|
|
} twa_message_type;
|
||
|
|
|
||
|
|
/* AEN strings */
|
||
|
|
static twa_message_type twa_aen_table[] = {
|
||
|
|
{0x0000, "AEN queue empty"},
|
||
|
|
{0x0001, "Controller reset occurred"},
|
||
|
|
{0x0002, "Degraded unit detected"},
|
||
|
|
{0x0003, "Controller error occured"},
|
||
|
|
{0x0004, "Background rebuild failed"},
|
||
|
|
{0x0005, "Background rebuild done"},
|
||
|
|
{0x0006, "Incomplete unit detected"},
|
||
|
|
{0x0007, "Background initialize done"},
|
||
|
|
{0x0008, "Unclean shutdown detected"},
|
||
|
|
{0x0009, "Drive timeout detected"},
|
||
|
|
{0x000A, "Drive error detected"},
|
||
|
|
{0x000B, "Rebuild started"},
|
||
|
|
{0x000C, "Background initialize started"},
|
||
|
|
{0x000D, "Entire logical unit was deleted"},
|
||
|
|
{0x000E, "Background initialize failed"},
|
||
|
|
{0x000F, "SMART attribute exceeded threshold"},
|
||
|
|
{0x0010, "Power supply reported AC under range"},
|
||
|
|
{0x0011, "Power supply reported DC out of range"},
|
||
|
|
{0x0012, "Power supply reported a malfunction"},
|
||
|
|
{0x0013, "Power supply predicted malfunction"},
|
||
|
|
{0x0014, "Battery charge is below threshold"},
|
||
|
|
{0x0015, "Fan speed is below threshold"},
|
||
|
|
{0x0016, "Temperature sensor is above threshold"},
|
||
|
|
{0x0017, "Power supply was removed"},
|
||
|
|
{0x0018, "Power supply was inserted"},
|
||
|
|
{0x0019, "Drive was removed from a bay"},
|
||
|
|
{0x001A, "Drive was inserted into a bay"},
|
||
|
|
{0x001B, "Drive bay cover door was opened"},
|
||
|
|
{0x001C, "Drive bay cover door was closed"},
|
||
|
|
{0x001D, "Product case was opened"},
|
||
|
|
{0x0020, "Prepare for shutdown (power-off)"},
|
||
|
|
{0x0021, "Downgrade UDMA mode to lower speed"},
|
||
|
|
{0x0022, "Upgrade UDMA mode to higher speed"},
|
||
|
|
{0x0023, "Sector repair completed"},
|
||
|
|
{0x0024, "Sbuf memory test failed"},
|
||
|
|
{0x0025, "Error flushing cached write data to array"},
|
||
|
|
{0x0026, "Drive reported data ECC error"},
|
||
|
|
{0x0027, "DCB has checksum error"},
|
||
|
|
{0x0028, "DCB version is unsupported"},
|
||
|
|
{0x0029, "Background verify started"},
|
||
|
|
{0x002A, "Background verify failed"},
|
||
|
|
{0x002B, "Background verify done"},
|
||
|
|
{0x002C, "Bad sector overwritten during rebuild"},
|
||
|
|
{0x002D, "Background rebuild error on source drive"},
|
||
|
|
{0x002E, "Replace failed because replacement drive too small"},
|
||
|
|
{0x002F, "Verify failed because array was never initialized"},
|
||
|
|
{0x0030, "Unsupported ATA drive"},
|
||
|
|
{0x0031, "Synchronize host/controller time"},
|
||
|
|
{0x0032, "Spare capacity is inadequate for some units"},
|
||
|
|
{0x0033, "Background migration started"},
|
||
|
|
{0x0034, "Background migration failed"},
|
||
|
|
{0x0035, "Background migration done"},
|
||
|
|
{0x0036, "Verify detected and fixed data/parity mismatch"},
|
||
|
|
{0x0037, "SO-DIMM incompatible"},
|
||
|
|
{0x0038, "SO-DIMM not detected"},
|
||
|
|
{0x0039, "Corrected Sbuf ECC error"},
|
||
|
|
{0x003A, "Drive power on reset detected"},
|
||
|
|
{0x003B, "Background rebuild paused"},
|
||
|
|
{0x003C, "Background initialize paused"},
|
||
|
|
{0x003D, "Background verify paused"},
|
||
|
|
{0x003E, "Background migration paused"},
|
||
|
|
{0x003F, "Corrupt flash file system detected"},
|
||
|
|
{0x0040, "Flash file system repaired"},
|
||
|
|
{0x0041, "Unit number assignments were lost"},
|
||
|
|
{0x0042, "Error during read of primary DCB"},
|
||
|
|
{0x0043, "Latent error found in backup DCB"},
|
||
|
|
{0x00FC, "Recovered/finished array membership update"},
|
||
|
|
{0x00FD, "Handler lockup"},
|
||
|
|
{0x00FE, "Retrying PCI transfer"},
|
||
|
|
{0x00FF, "AEN queue is full"},
|
||
|
|
{0xFFFFFFFF, (char*) 0}
|
||
|
|
};
|
||
|
|
|
||
|
|
/* AEN severity table */
|
||
|
|
static char *twa_aen_severity_table[] =
|
||
|
|
{
|
||
|
|
"None", "ERROR", "WARNING", "INFO", "DEBUG", (char*) 0
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Error strings */
|
||
|
|
static twa_message_type twa_error_table[] = {
|
||
|
|
{0x0100, "SGL entry contains zero data"},
|
||
|
|
{0x0101, "Invalid command opcode"},
|
||
|
|
{0x0102, "SGL entry has unaligned address"},
|
||
|
|
{0x0103, "SGL size does not match command"},
|
||
|
|
{0x0104, "SGL entry has illegal length"},
|
||
|
|
{0x0105, "Command packet is not aligned"},
|
||
|
|
{0x0106, "Invalid request ID"},
|
||
|
|
{0x0107, "Duplicate request ID"},
|
||
|
|
{0x0108, "ID not locked"},
|
||
|
|
{0x0109, "LBA out of range"},
|
||
|
|
{0x010A, "Logical unit not supported"},
|
||
|
|
{0x010B, "Parameter table does not exist"},
|
||
|
|
{0x010C, "Parameter index does not exist"},
|
||
|
|
{0x010D, "Invalid field in CDB"},
|
||
|
|
{0x010E, "Specified port has invalid drive"},
|
||
|
|
{0x010F, "Parameter item size mismatch"},
|
||
|
|
{0x0110, "Failed memory allocation"},
|
||
|
|
{0x0111, "Memory request too large"},
|
||
|
|
{0x0112, "Out of memory segments"},
|
||
|
|
{0x0113, "Invalid address to deallocate"},
|
||
|
|
{0x0114, "Out of memory"},
|
||
|
|
{0x0115, "Out of heap"},
|
||
|
|
{0x0120, "Double degrade"},
|
||
|
|
{0x0121, "Drive not degraded"},
|
||
|
|
{0x0122, "Reconstruct error"},
|
||
|
|
{0x0123, "Replace not accepted"},
|
||
|
|
{0x0124, "Replace drive capacity too small"},
|
||
|
|
{0x0125, "Sector count not allowed"},
|
||
|
|
{0x0126, "No spares left"},
|
||
|
|
{0x0127, "Reconstruct error"},
|
||
|
|
{0x0128, "Unit is offline"},
|
||
|
|
{0x0129, "Cannot update status to DCB"},
|
||
|
|
{0x0130, "Invalid stripe handle"},
|
||
|
|
{0x0131, "Handle that was not locked"},
|
||
|
|
{0x0132, "Handle that was not empty"},
|
||
|
|
{0x0133, "Handle has different owner"},
|
||
|
|
{0x0140, "IPR has parent"},
|
||
|
|
{0x0150, "Illegal Pbuf address alignment"},
|
||
|
|
{0x0151, "Illegal Pbuf transfer length"},
|
||
|
|
{0x0152, "Illegal Sbuf address alignment"},
|
||
|
|
{0x0153, "Illegal Sbuf transfer length"},
|
||
|
|
{0x0160, "Command packet too large"},
|
||
|
|
{0x0161, "SGL exceeds maximum length"},
|
||
|
|
{0x0162, "SGL has too many entries"},
|
||
|
|
{0x0170, "Insufficient resources for rebuilder"},
|
||
|
|
{0x0171, "Verify error (data != parity)"},
|
||
|
|
{0x0180, "Requested segment not in directory of this DCB"},
|
||
|
|
{0x0181, "DCB segment has unsupported version"},
|
||
|
|
{0x0182, "DCB segment has checksum error"},
|
||
|
|
{0x0183, "DCB support (settings) segment invalid"},
|
||
|
|
{0x0184, "DCB UDB (unit descriptor block) segment invalid"},
|
||
|
|
{0x0185, "DCB GUID (globally unique identifier) segment invalid"},
|
||
|
|
{0x01A0, "Could not clear Sbuf"},
|
||
|
|
{0x01C0, "Flash identify failed"},
|
||
|
|
{0x01C1, "Flash out of bounds"},
|
||
|
|
{0x01C2, "Flash verify error"},
|
||
|
|
{0x01C3, "Flash file object not found"},
|
||
|
|
{0x01C4, "Flash file already present"},
|
||
|
|
{0x01C5, "Flash file system full"},
|
||
|
|
{0x01C6, "Flash file not present"},
|
||
|
|
{0x01C7, "Flash file size error"},
|
||
|
|
{0x01C8, "Bad flash file checksum"},
|
||
|
|
{0x01CA, "Corrupt flash file system detected"},
|
||
|
|
{0x01D0, "Invalid field in parameter list"},
|
||
|
|
{0x01D1, "Parameter list length error"},
|
||
|
|
{0x01D2, "Parameter item is not changeable"},
|
||
|
|
{0x01D3, "Parameter item is not saveable"},
|
||
|
|
{0x0200, "UDMA CRC error"},
|
||
|
|
{0x0201, "Internal CRC error"},
|
||
|
|
{0x0202, "Data ECC error"},
|
||
|
|
{0x0203, "ADP level 1 error"},
|
||
|
|
{0x0204, "Port timeout"},
|
||
|
|
{0x0205, "Drive power on reset"},
|
||
|
|
{0x0206, "ADP level 2 error"},
|
||
|
|
{0x0207, "Soft reset failed"},
|
||
|
|
{0x0208, "Drive not ready"},
|
||
|
|
{0x0209, "Unclassified port error"},
|
||
|
|
{0x020A, "Drive aborted command"},
|
||
|
|
{0x0210, "Internal CRC error"},
|
||
|
|
{0x0211, "PCI abort error"},
|
||
|
|
{0x0212, "PCI parity error"},
|
||
|
|
{0x0213, "Port handler error"},
|
||
|
|
{0x0214, "Token interrupt count error"},
|
||
|
|
{0x0215, "Timeout waiting for PCI transfer"},
|
||
|
|
{0x0216, "Corrected buffer ECC"},
|
||
|
|
{0x0217, "Uncorrected buffer ECC"},
|
||
|
|
{0x0230, "Unsupported command during flash recovery"},
|
||
|
|
{0x0231, "Next image buffer expected"},
|
||
|
|
{0x0232, "Binary image architecture incompatible"},
|
||
|
|
{0x0233, "Binary image has no signature"},
|
||
|
|
{0x0234, "Binary image has bad checksum"},
|
||
|
|
{0x0235, "Image downloaded overflowed buffer"},
|
||
|
|
{0x0240, "I2C device not found"},
|
||
|
|
{0x0241, "I2C transaction aborted"},
|
||
|
|
{0x0242, "SO-DIMM parameter(s) incompatible using defaults"},
|
||
|
|
{0x0243, "SO-DIMM unsupported"},
|
||
|
|
{0x0248, "SPI transfer status error"},
|
||
|
|
{0x0249, "SPI transfer timeout error"},
|
||
|
|
{0x0250, "Invalid unit descriptor size in CreateUnit"},
|
||
|
|
{0x0251, "Unit descriptor size exceeds data buffer in CreateUnit"},
|
||
|
|
{0x0252, "Invalid value in CreateUnit descriptor"},
|
||
|
|
{0x0253, "Inadequate disk space to support descriptor in CreateUnit"},
|
||
|
|
{0x0254, "Unable to create data channel for this unit descriptor"},
|
||
|
|
{0x0255, "CreateUnit descriptor specifies a drive already in use"},
|
||
|
|
{0x0256, "Unable to write configuration to all disks during CreateUnit"},
|
||
|
|
{0x0257, "CreateUnit does not support this descriptor version"},
|
||
|
|
{0x0258, "Invalid subunit for RAID 0 or 5 in CreateUnit"},
|
||
|
|
{0x0259, "Too many descriptors in CreateUnit"},
|
||
|
|
{0x025A, "Invalid configuration specified in CreateUnit descriptor"},
|
||
|
|
{0x025B, "Invalid LBA offset specified in CreateUnit descriptor"},
|
||
|
|
{0x025C, "Invalid stripelet size specified in CreateUnit descriptor"},
|
||
|
|
{0x0260, "SMART attribute exceeded threshold"},
|
||
|
|
{0xFFFFFFFF, (char*) 0}
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Control register bit definitions */
|
||
|
|
#define TW_CONTROL_CLEAR_HOST_INTERRUPT 0x00080000
|
||
|
|
#define TW_CONTROL_CLEAR_ATTENTION_INTERRUPT 0x00040000
|
||
|
|
#define TW_CONTROL_MASK_COMMAND_INTERRUPT 0x00020000
|
||
|
|
#define TW_CONTROL_MASK_RESPONSE_INTERRUPT 0x00010000
|
||
|
|
#define TW_CONTROL_UNMASK_COMMAND_INTERRUPT 0x00008000
|
||
|
|
#define TW_CONTROL_UNMASK_RESPONSE_INTERRUPT 0x00004000
|
||
|
|
#define TW_CONTROL_CLEAR_ERROR_STATUS 0x00000200
|
||
|
|
#define TW_CONTROL_ISSUE_SOFT_RESET 0x00000100
|
||
|
|
#define TW_CONTROL_ENABLE_INTERRUPTS 0x00000080
|
||
|
|
#define TW_CONTROL_DISABLE_INTERRUPTS 0x00000040
|
||
|
|
#define TW_CONTROL_ISSUE_HOST_INTERRUPT 0x00000020
|
||
|
|
#define TW_CONTROL_CLEAR_PARITY_ERROR 0x00800000
|
||
|
|
#define TW_CONTROL_CLEAR_QUEUE_ERROR 0x00400000
|
||
|
|
#define TW_CONTROL_CLEAR_PCI_ABORT 0x00100000
|
||
|
|
#define TW_CONTROL_CLEAR_SBUF_WRITE_ERROR 0x00000008
|
||
|
|
|
||
|
|
/* Status register bit definitions */
|
||
|
|
#define TW_STATUS_MAJOR_VERSION_MASK 0xF0000000
|
||
|
|
#define TW_STATUS_MINOR_VERSION_MASK 0x0F000000
|
||
|
|
#define TW_STATUS_PCI_PARITY_ERROR 0x00800000
|
||
|
|
#define TW_STATUS_QUEUE_ERROR 0x00400000
|
||
|
|
#define TW_STATUS_MICROCONTROLLER_ERROR 0x00200000
|
||
|
|
#define TW_STATUS_PCI_ABORT 0x00100000
|
||
|
|
#define TW_STATUS_HOST_INTERRUPT 0x00080000
|
||
|
|
#define TW_STATUS_ATTENTION_INTERRUPT 0x00040000
|
||
|
|
#define TW_STATUS_COMMAND_INTERRUPT 0x00020000
|
||
|
|
#define TW_STATUS_RESPONSE_INTERRUPT 0x00010000
|
||
|
|
#define TW_STATUS_COMMAND_QUEUE_FULL 0x00008000
|
||
|
|
#define TW_STATUS_RESPONSE_QUEUE_EMPTY 0x00004000
|
||
|
|
#define TW_STATUS_MICROCONTROLLER_READY 0x00002000
|
||
|
|
#define TW_STATUS_COMMAND_QUEUE_EMPTY 0x00001000
|
||
|
|
#define TW_STATUS_EXPECTED_BITS 0x00002000
|
||
|
|
#define TW_STATUS_UNEXPECTED_BITS 0x00F00008
|
||
|
|
#define TW_STATUS_SBUF_WRITE_ERROR 0x00000008
|
||
|
|
#define TW_STATUS_VALID_INTERRUPT 0x00DF0008
|
||
|
|
|
||
|
|
/* RESPONSE QUEUE BIT DEFINITIONS */
|
||
|
|
#define TW_RESPONSE_ID_MASK 0x00000FF0
|
||
|
|
|
||
|
|
/* PCI related defines */
|
||
|
|
#define TW_NUMDEVICES 1
|
||
|
|
#define TW_PCI_CLEAR_PARITY_ERRORS 0xc100
|
||
|
|
#define TW_PCI_CLEAR_PCI_ABORT 0x2000
|
||
|
|
|
||
|
|
/* Command packet opcodes used by the driver */
|
||
|
|
#define TW_OP_INIT_CONNECTION 0x1
|
||
|
|
#define TW_OP_GET_PARAM 0x12
|
||
|
|
#define TW_OP_SET_PARAM 0x13
|
||
|
|
#define TW_OP_EXECUTE_SCSI 0x10
|
||
|
|
#define TW_OP_DOWNLOAD_FIRMWARE 0x16
|
||
|
|
#define TW_OP_RESET 0x1C
|
||
|
|
|
||
|
|
/* Asynchronous Event Notification (AEN) codes used by the driver */
|
||
|
|
#define TW_AEN_QUEUE_EMPTY 0x0000
|
||
|
|
#define TW_AEN_SOFT_RESET 0x0001
|
||
|
|
#define TW_AEN_SYNC_TIME_WITH_HOST 0x031
|
||
|
|
#define TW_AEN_SEVERITY_ERROR 0x1
|
||
|
|
#define TW_AEN_SEVERITY_DEBUG 0x4
|
||
|
|
#define TW_AEN_NOT_RETRIEVED 0x1
|
||
|
|
#define TW_AEN_RETRIEVED 0x2
|
||
|
|
|
||
|
|
/* Command state defines */
|
||
|
|
#define TW_S_INITIAL 0x1 /* Initial state */
|
||
|
|
#define TW_S_STARTED 0x2 /* Id in use */
|
||
|
|
#define TW_S_POSTED 0x4 /* Posted to the controller */
|
||
|
|
#define TW_S_PENDING 0x8 /* Waiting to be posted in isr */
|
||
|
|
#define TW_S_COMPLETED 0x10 /* Completed by isr */
|
||
|
|
#define TW_S_FINISHED 0x20 /* I/O completely done */
|
||
|
|
|
||
|
|
/* Compatibility defines */
|
||
|
|
#define TW_9000_ARCH_ID 0x5
|
||
|
|
#define TW_CURRENT_DRIVER_SRL 28
|
||
|
|
#define TW_CURRENT_DRIVER_BUILD 9
|
||
|
|
#define TW_CURRENT_DRIVER_BRANCH 4
|
||
|
|
|
||
|
|
/* Phase defines */
|
||
|
|
#define TW_PHASE_INITIAL 0
|
||
|
|
#define TW_PHASE_SINGLE 1
|
||
|
|
#define TW_PHASE_SGLIST 2
|
||
|
|
|
||
|
|
/* Misc defines */
|
||
|
|
#define TW_SECTOR_SIZE 512
|
||
|
|
#define TW_ALIGNMENT_9000 4 /* 4 bytes */
|
||
|
|
#define TW_ALIGNMENT_9000_SGL 0x3
|
||
|
|
#define TW_MAX_UNITS 16
|
||
|
|
#define TW_INIT_MESSAGE_CREDITS 0x100
|
||
|
|
#define TW_INIT_COMMAND_PACKET_SIZE 0x3
|
||
|
|
#define TW_INIT_COMMAND_PACKET_SIZE_EXTENDED 0x6
|
||
|
|
#define TW_EXTENDED_INIT_CONNECT 0x2
|
||
|
|
#define TW_BUNDLED_FW_SAFE_TO_FLASH 0x4
|
||
|
|
#define TW_CTLR_FW_RECOMMENDS_FLASH 0x8
|
||
|
|
#define TW_CTLR_FW_COMPATIBLE 0x2
|
||
|
|
#define TW_BASE_FW_SRL 24
|
||
|
|
#define TW_BASE_FW_BRANCH 0
|
||
|
|
#define TW_BASE_FW_BUILD 1
|
||
|
|
#define TW_FW_SRL_LUNS_SUPPORTED 28
|
||
|
|
#define TW_Q_LENGTH 256
|
||
|
|
#define TW_Q_START 0
|
||
|
|
#define TW_MAX_SLOT 32
|
||
|
|
#define TW_MAX_RESET_TRIES 2
|
||
|
|
#define TW_MAX_CMDS_PER_LUN 254
|
||
|
|
#define TW_MAX_RESPONSE_DRAIN 256
|
||
|
|
#define TW_MAX_AEN_DRAIN 40
|
||
|
|
#define TW_IN_RESET 2
|
||
|
|
#define TW_IN_CHRDEV_IOCTL 3
|
||
|
|
#define TW_IN_ATTENTION_LOOP 4
|
||
|
|
#define TW_MAX_SECTORS 256
|
||
|
|
#define TW_AEN_WAIT_TIME 1000
|
||
|
|
#define TW_IOCTL_WAIT_TIME (1 * HZ) /* 1 second */
|
||
|
|
#define TW_MAX_CDB_LEN 16
|
||
|
|
#define TW_ISR_DONT_COMPLETE 2
|
||
|
|
#define TW_ISR_DONT_RESULT 3
|
||
|
|
#define TW_IOCTL_CHRDEV_TIMEOUT 60 /* 60 seconds */
|
||
|
|
#define TW_IOCTL_CHRDEV_FREE -1
|
||
|
|
#define TW_COMMAND_OFFSET 128 /* 128 bytes */
|
||
|
|
#define TW_VERSION_TABLE 0x0402
|
||
|
|
#define TW_TIMEKEEP_TABLE 0x040A
|
||
|
|
#define TW_INFORMATION_TABLE 0x0403
|
||
|
|
#define TW_PARAM_FWVER 3
|
||
|
|
#define TW_PARAM_FWVER_LENGTH 16
|
||
|
|
#define TW_PARAM_BIOSVER 4
|
||
|
|
#define TW_PARAM_BIOSVER_LENGTH 16
|
||
|
|
#define TW_PARAM_PORTCOUNT 3
|
||
|
|
#define TW_PARAM_PORTCOUNT_LENGTH 1
|
||
|
|
#define TW_MIN_SGL_LENGTH 0x200 /* 512 bytes */
|
||
|
|
#define TW_MAX_SENSE_LENGTH 256
|
||
|
|
#define TW_EVENT_SOURCE_AEN 0x1000
|
||
|
|
#define TW_EVENT_SOURCE_COMMAND 0x1001
|
||
|
|
#define TW_EVENT_SOURCE_PCHIP 0x1002
|
||
|
|
#define TW_EVENT_SOURCE_DRIVER 0x1003
|
||
|
|
#define TW_IOCTL_GET_COMPATIBILITY_INFO 0x101
|
||
|
|
#define TW_IOCTL_GET_LAST_EVENT 0x102
|
||
|
|
#define TW_IOCTL_GET_FIRST_EVENT 0x103
|
||
|
|
#define TW_IOCTL_GET_NEXT_EVENT 0x104
|
||
|
|
#define TW_IOCTL_GET_PREVIOUS_EVENT 0x105
|
||
|
|
#define TW_IOCTL_GET_LOCK 0x106
|
||
|
|
#define TW_IOCTL_RELEASE_LOCK 0x107
|
||
|
|
#define TW_IOCTL_FIRMWARE_PASS_THROUGH 0x108
|
||
|
|
#define TW_IOCTL_ERROR_STATUS_NOT_LOCKED 0x1001 // Not locked
|
||
|
|
#define TW_IOCTL_ERROR_STATUS_LOCKED 0x1002 // Already locked
|
||
|
|
#define TW_IOCTL_ERROR_STATUS_NO_MORE_EVENTS 0x1003 // No more events
|
||
|
|
#define TW_IOCTL_ERROR_STATUS_AEN_CLOBBER 0x1004 // AEN clobber occurred
|
||
|
|
#define TW_IOCTL_ERROR_OS_EFAULT -EFAULT // Bad address
|
||
|
|
#define TW_IOCTL_ERROR_OS_EINTR -EINTR // Interrupted system call
|
||
|
|
#define TW_IOCTL_ERROR_OS_EINVAL -EINVAL // Invalid argument
|
||
|
|
#define TW_IOCTL_ERROR_OS_ENOMEM -ENOMEM // Out of memory
|
||
|
|
#define TW_IOCTL_ERROR_OS_ERESTARTSYS -ERESTARTSYS // Restart system call
|
||
|
|
#define TW_IOCTL_ERROR_OS_EIO -EIO // I/O error
|
||
|
|
#define TW_IOCTL_ERROR_OS_ENOTTY -ENOTTY // Not a typewriter
|
||
|
|
#define TW_IOCTL_ERROR_OS_ENODEV -ENODEV // No such device
|
||
|
|
#define TW_ALLOCATION_LENGTH 128
|
||
|
|
#define TW_SENSE_DATA_LENGTH 18
|
||
|
|
#define TW_STATUS_CHECK_CONDITION 2
|
||
|
|
#define TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED 0x10a
|
||
|
|
#define TW_ERROR_UNIT_OFFLINE 0x128
|
||
|
|
#define TW_MESSAGE_SOURCE_CONTROLLER_ERROR 3
|
||
|
|
#define TW_MESSAGE_SOURCE_CONTROLLER_EVENT 4
|
||
|
|
#define TW_MESSAGE_SOURCE_LINUX_DRIVER 6
|
||
|
|
#define TW_DRIVER TW_MESSAGE_SOURCE_LINUX_DRIVER
|
||
|
|
#define TW_MESSAGE_SOURCE_LINUX_OS 9
|
||
|
|
#define TW_OS TW_MESSAGE_SOURCE_LINUX_OS
|
||
|
|
#ifndef PCI_DEVICE_ID_3WARE_9000
|
||
|
|
#define PCI_DEVICE_ID_3WARE_9000 0x1002
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* Bitmask macros to eliminate bitfields */
|
||
|
|
|
||
|
|
/* opcode: 5, reserved: 3 */
|
||
|
|
#define TW_OPRES_IN(x,y) ((x << 5) | (y & 0x1f))
|
||
|
|
#define TW_OP_OUT(x) (x & 0x1f)
|
||
|
|
|
||
|
|
/* opcode: 5, sgloffset: 3 */
|
||
|
|
#define TW_OPSGL_IN(x,y) ((x << 5) | (y & 0x1f))
|
||
|
|
#define TW_SGL_OUT(x) ((x >> 5) & 0x7)
|
||
|
|
|
||
|
|
/* severity: 3, reserved: 5 */
|
||
|
|
#define TW_SEV_OUT(x) (x & 0x7)
|
||
|
|
|
||
|
|
/* reserved_1: 4, response_id: 8, reserved_2: 20 */
|
||
|
|
#define TW_RESID_OUT(x) ((x >> 4) & 0xff)
|
||
|
|
|
||
|
|
/* request_id: 12, lun: 4 */
|
||
|
|
#define TW_REQ_LUN_IN(lun, request_id) (((lun << 12) & 0xf000) | (request_id & 0xfff))
|
||
|
|
#define TW_LUN_OUT(lun) ((lun >> 12) & 0xf)
|
||
|
|
|
||
|
|
/* Macros */
|
||
|
|
#define TW_CONTROL_REG_ADDR(x) (x->base_addr)
|
||
|
|
#define TW_STATUS_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0x4)
|
||
|
|
#define TW_COMMAND_QUEUE_REG_ADDR(x) (sizeof(dma_addr_t) > 4 ? ((unsigned char __iomem *)x->base_addr + 0x20) : ((unsigned char __iomem *)x->base_addr + 0x8))
|
||
|
|
#define TW_RESPONSE_QUEUE_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0xC)
|
||
|
|
#define TW_CLEAR_ALL_INTERRUPTS(x) (writel(TW_STATUS_VALID_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
|
||
|
|
#define TW_CLEAR_ATTENTION_INTERRUPT(x) (writel(TW_CONTROL_CLEAR_ATTENTION_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
|
||
|
|
#define TW_CLEAR_HOST_INTERRUPT(x) (writel(TW_CONTROL_CLEAR_HOST_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
|
||
|
|
#define TW_DISABLE_INTERRUPTS(x) (writel(TW_CONTROL_DISABLE_INTERRUPTS, TW_CONTROL_REG_ADDR(x)))
|
||
|
|
#define TW_ENABLE_AND_CLEAR_INTERRUPTS(x) (writel(TW_CONTROL_CLEAR_ATTENTION_INTERRUPT | TW_CONTROL_UNMASK_RESPONSE_INTERRUPT | TW_CONTROL_ENABLE_INTERRUPTS, TW_CONTROL_REG_ADDR(x)))
|
||
|
|
#define TW_MASK_COMMAND_INTERRUPT(x) (writel(TW_CONTROL_MASK_COMMAND_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
|
||
|
|
#define TW_UNMASK_COMMAND_INTERRUPT(x) (writel(TW_CONTROL_UNMASK_COMMAND_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
|
||
|
|
#define TW_SOFT_RESET(x) (writel(TW_CONTROL_ISSUE_SOFT_RESET | \
|
||
|
|
TW_CONTROL_CLEAR_HOST_INTERRUPT | \
|
||
|
|
TW_CONTROL_CLEAR_ATTENTION_INTERRUPT | \
|
||
|
|
TW_CONTROL_MASK_COMMAND_INTERRUPT | \
|
||
|
|
TW_CONTROL_MASK_RESPONSE_INTERRUPT | \
|
||
|
|
TW_CONTROL_CLEAR_ERROR_STATUS | \
|
||
|
|
TW_CONTROL_DISABLE_INTERRUPTS, TW_CONTROL_REG_ADDR(x)))
|
||
|
|
#define TW_PRINTK(h,a,b,c) { \
|
||
|
|
if (h) \
|
||
|
|
printk(KERN_WARNING "3w-9xxx: scsi%d: ERROR: (0x%02X:0x%04X): %s.\n",h->host_no,a,b,c); \
|
||
|
|
else \
|
||
|
|
printk(KERN_WARNING "3w-9xxx: ERROR: (0x%02X:0x%04X): %s.\n",a,b,c); \
|
||
|
|
}
|
||
|
|
#define TW_MAX_LUNS(srl) (srl < TW_FW_SRL_LUNS_SUPPORTED ? 1 : 16)
|
||
|
|
#define TW_COMMAND_SIZE (sizeof(dma_addr_t) > 4 ? 5 : 4)
|
||
|
|
#define TW_APACHE_MAX_SGL_LENGTH (sizeof(dma_addr_t) > 4 ? 72 : 109)
|
||
|
|
#define TW_ESCALADE_MAX_SGL_LENGTH (sizeof(dma_addr_t) > 4 ? 41 : 62)
|
||
|
|
#define TW_PADDING_LENGTH (sizeof(dma_addr_t) > 4 ? 8 : 0)
|
||
|
|
|
||
|
|
#pragma pack(1)
|
||
|
|
|
||
|
|
/* Scatter Gather List Entry */
|
||
|
|
typedef struct TAG_TW_SG_Entry {
|
||
|
|
dma_addr_t address;
|
||
|
|
u32 length;
|
||
|
|
} TW_SG_Entry;
|
||
|
|
|
||
|
|
/* Command Packet */
|
||
|
|
typedef struct TW_Command {
|
||
|
|
unsigned char opcode__sgloffset;
|
||
|
|
unsigned char size;
|
||
|
|
unsigned char request_id;
|
||
|
|
unsigned char unit__hostid;
|
||
|
|
/* Second DWORD */
|
||
|
|
unsigned char status;
|
||
|
|
unsigned char flags;
|
||
|
|
union {
|
||
|
|
unsigned short block_count;
|
||
|
|
unsigned short parameter_count;
|
||
|
|
} byte6_offset;
|
||
|
|
union {
|
||
|
|
struct {
|
||
|
|
u32 lba;
|
||
|
|
TW_SG_Entry sgl[TW_ESCALADE_MAX_SGL_LENGTH];
|
||
|
|
dma_addr_t padding;
|
||
|
|
} io;
|
||
|
|
struct {
|
||
|
|
TW_SG_Entry sgl[TW_ESCALADE_MAX_SGL_LENGTH];
|
||
|
|
u32 padding;
|
||
|
|
dma_addr_t padding2;
|
||
|
|
} param;
|
||
|
|
} byte8_offset;
|
||
|
|
} TW_Command;
|
||
|
|
|
||
|
|
/* Command Packet for 9000+ controllers */
|
||
|
|
typedef struct TAG_TW_Command_Apache {
|
||
|
|
unsigned char opcode__reserved;
|
||
|
|
unsigned char unit;
|
||
|
|
unsigned short request_id__lunl;
|
||
|
|
unsigned char status;
|
||
|
|
unsigned char sgl_offset;
|
||
|
|
unsigned short sgl_entries__lunh;
|
||
|
|
unsigned char cdb[16];
|
||
|
|
TW_SG_Entry sg_list[TW_APACHE_MAX_SGL_LENGTH];
|
||
|
|
unsigned char padding[TW_PADDING_LENGTH];
|
||
|
|
} TW_Command_Apache;
|
||
|
|
|
||
|
|
/* New command packet header */
|
||
|
|
typedef struct TAG_TW_Command_Apache_Header {
|
||
|
|
unsigned char sense_data[TW_SENSE_DATA_LENGTH];
|
||
|
|
struct {
|
||
|
|
char reserved[4];
|
||
|
|
unsigned short error;
|
||
|
|
unsigned char padding;
|
||
|
|
unsigned char severity__reserved;
|
||
|
|
} status_block;
|
||
|
|
unsigned char err_specific_desc[98];
|
||
|
|
struct {
|
||
|
|
unsigned char size_header;
|
||
|
|
unsigned short reserved;
|
||
|
|
unsigned char size_sense;
|
||
|
|
} header_desc;
|
||
|
|
} TW_Command_Apache_Header;
|
||
|
|
|
||
|
|
/* This struct is a union of the 2 command packets */
|
||
|
|
typedef struct TAG_TW_Command_Full {
|
||
|
|
TW_Command_Apache_Header header;
|
||
|
|
union {
|
||
|
|
TW_Command oldcommand;
|
||
|
|
TW_Command_Apache newcommand;
|
||
|
|
} command;
|
||
|
|
} TW_Command_Full;
|
||
|
|
|
||
|
|
/* Initconnection structure */
|
||
|
|
typedef struct TAG_TW_Initconnect {
|
||
|
|
unsigned char opcode__reserved;
|
||
|
|
unsigned char size;
|
||
|
|
unsigned char request_id;
|
||
|
|
unsigned char res2;
|
||
|
|
unsigned char status;
|
||
|
|
unsigned char flags;
|
||
|
|
unsigned short message_credits;
|
||
|
|
u32 features;
|
||
|
|
unsigned short fw_srl;
|
||
|
|
unsigned short fw_arch_id;
|
||
|
|
unsigned short fw_branch;
|
||
|
|
unsigned short fw_build;
|
||
|
|
u32 result;
|
||
|
|
} TW_Initconnect;
|
||
|
|
|
||
|
|
/* Event info structure */
|
||
|
|
typedef struct TAG_TW_Event
|
||
|
|
{
|
||
|
|
unsigned int sequence_id;
|
||
|
|
unsigned int time_stamp_sec;
|
||
|
|
unsigned short aen_code;
|
||
|
|
unsigned char severity;
|
||
|
|
unsigned char retrieved;
|
||
|
|
unsigned char repeat_count;
|
||
|
|
unsigned char parameter_len;
|
||
|
|
unsigned char parameter_data[98];
|
||
|
|
} TW_Event;
|
||
|
|
|
||
|
|
typedef struct TAG_TW_Ioctl_Driver_Command {
|
||
|
|
unsigned int control_code;
|
||
|
|
unsigned int status;
|
||
|
|
unsigned int unique_id;
|
||
|
|
unsigned int sequence_id;
|
||
|
|
unsigned int os_specific;
|
||
|
|
unsigned int buffer_length;
|
||
|
|
} TW_Ioctl_Driver_Command;
|
||
|
|
|
||
|
|
typedef struct TAG_TW_Ioctl_Apache {
|
||
|
|
TW_Ioctl_Driver_Command driver_command;
|
||
|
|
char padding[488];
|
||
|
|
TW_Command_Full firmware_command;
|
||
|
|
char data_buffer[1];
|
||
|
|
} TW_Ioctl_Buf_Apache;
|
||
|
|
|
||
|
|
/* Lock structure for ioctl get/release lock */
|
||
|
|
typedef struct TAG_TW_Lock {
|
||
|
|
unsigned long timeout_msec;
|
||
|
|
unsigned long time_remaining_msec;
|
||
|
|
unsigned long force_flag;
|
||
|
|
} TW_Lock;
|
||
|
|
|
||
|
|
/* GetParam descriptor */
|
||
|
|
typedef struct {
|
||
|
|
unsigned short table_id;
|
||
|
|
unsigned short parameter_id;
|
||
|
|
unsigned short parameter_size_bytes;
|
||
|
|
unsigned short actual_parameter_size_bytes;
|
||
|
|
unsigned char data[1];
|
||
|
|
} TW_Param_Apache, *PTW_Param_Apache;
|
||
|
|
|
||
|
|
/* Response queue */
|
||
|
|
typedef union TAG_TW_Response_Queue {
|
||
|
|
u32 response_id;
|
||
|
|
u32 value;
|
||
|
|
} TW_Response_Queue;
|
||
|
|
|
||
|
|
typedef struct TAG_TW_Info {
|
||
|
|
char *buffer;
|
||
|
|
int length;
|
||
|
|
int offset;
|
||
|
|
int position;
|
||
|
|
} TW_Info;
|
||
|
|
|
||
|
|
/* Compatibility information structure */
|
||
|
|
typedef struct TAG_TW_Compatibility_Info
|
||
|
|
{
|
||
|
|
char driver_version[32];
|
||
|
|
unsigned short working_srl;
|
||
|
|
unsigned short working_branch;
|
||
|
|
unsigned short working_build;
|
||
|
|
unsigned short driver_srl_high;
|
||
|
|
unsigned short driver_branch_high;
|
||
|
|
unsigned short driver_build_high;
|
||
|
|
unsigned short driver_srl_low;
|
||
|
|
unsigned short driver_branch_low;
|
||
|
|
unsigned short driver_build_low;
|
||
|
|
} TW_Compatibility_Info;
|
||
|
|
|
||
|
|
typedef struct TAG_TW_Device_Extension {
|
||
|
|
u32 __iomem *base_addr;
|
||
|
|
unsigned long *generic_buffer_virt[TW_Q_LENGTH];
|
||
|
|
dma_addr_t generic_buffer_phys[TW_Q_LENGTH];
|
||
|
|
TW_Command_Full *command_packet_virt[TW_Q_LENGTH];
|
||
|
|
dma_addr_t command_packet_phys[TW_Q_LENGTH];
|
||
|
|
struct pci_dev *tw_pci_dev;
|
||
|
|
struct scsi_cmnd *srb[TW_Q_LENGTH];
|
||
|
|
unsigned char free_queue[TW_Q_LENGTH];
|
||
|
|
unsigned char free_head;
|
||
|
|
unsigned char free_tail;
|
||
|
|
unsigned char pending_queue[TW_Q_LENGTH];
|
||
|
|
unsigned char pending_head;
|
||
|
|
unsigned char pending_tail;
|
||
|
|
int state[TW_Q_LENGTH];
|
||
|
|
unsigned int posted_request_count;
|
||
|
|
unsigned int max_posted_request_count;
|
||
|
|
unsigned int pending_request_count;
|
||
|
|
unsigned int max_pending_request_count;
|
||
|
|
unsigned int max_sgl_entries;
|
||
|
|
unsigned int sgl_entries;
|
||
|
|
unsigned int num_resets;
|
||
|
|
unsigned int sector_count;
|
||
|
|
unsigned int max_sector_count;
|
||
|
|
unsigned int aen_count;
|
||
|
|
struct Scsi_Host *host;
|
||
|
|
long flags;
|
||
|
|
int reset_print;
|
||
|
|
TW_Event *event_queue[TW_Q_LENGTH];
|
||
|
|
unsigned char error_index;
|
||
|
|
unsigned char event_queue_wrapped;
|
||
|
|
unsigned int error_sequence_id;
|
||
|
|
int ioctl_sem_lock;
|
||
|
|
u32 ioctl_msec;
|
||
|
|
int chrdev_request_id;
|
||
|
|
wait_queue_head_t ioctl_wqueue;
|
||
|
|
struct semaphore ioctl_sem;
|
||
|
|
char aen_clobber;
|
||
|
|
unsigned short working_srl;
|
||
|
|
unsigned short working_branch;
|
||
|
|
unsigned short working_build;
|
||
|
|
} TW_Device_Extension;
|
||
|
|
|
||
|
|
#pragma pack()
|
||
|
|
|
||
|
|
#endif /* _3W_9XXX_H */
|
||
|
|
|