leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5fe6e0151d
linux/include/net/rtnetlink.h

134 lines
4.6 KiB
C
Raw Normal View History

[RTNL]: Message handler registration interface This patch adds a new interface to register rtnetlink message handlers replacing the exported rtnl_links[] array which required many message handlers to be exported unnecessarly. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:48:11 +00:00
#ifndef __NET_RTNETLINK_H
#define __NET_RTNETLINK_H
#include <linux/rtnetlink.h>
#include <net/netlink.h>
typedef int (*rtnl_doit_func)(struct sk_buff *, struct nlmsghdr *, void *);
typedef int (*rtnl_dumpit_func)(struct sk_buff *, struct netlink_callback *);
rtnetlink: Compute and store minimum ifinfo dump size The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-10 01:27:09 +00:00
typedef u16 (*rtnl_calcit_func)(struct sk_buff *);
[RTNL]: Message handler registration interface This patch adds a new interface to register rtnetlink message handlers replacing the exported rtnl_links[] array which required many message handlers to be exported unnecessarly. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:48:11 +00:00
extern int __rtnl_register(int protocol, int msgtype,
rtnetlink: Compute and store minimum ifinfo dump size The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-10 01:27:09 +00:00
rtnl_doit_func, rtnl_dumpit_func,
rtnl_calcit_func);
[RTNL]: Message handler registration interface This patch adds a new interface to register rtnetlink message handlers replacing the exported rtnl_links[] array which required many message handlers to be exported unnecessarly. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:48:11 +00:00
extern void rtnl_register(int protocol, int msgtype,
rtnetlink: Compute and store minimum ifinfo dump size The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-10 01:27:09 +00:00
rtnl_doit_func, rtnl_dumpit_func,
rtnl_calcit_func);
[RTNL]: Message handler registration interface This patch adds a new interface to register rtnetlink message handlers replacing the exported rtnl_links[] array which required many message handlers to be exported unnecessarly. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:48:11 +00:00
extern int rtnl_unregister(int protocol, int msgtype);
extern void rtnl_unregister_all(int protocol);
netlink: constify nlmsghdr arguments Consitfy nlmsghdr arguments to a couple of functions as preparation for the next patch, which will constify the netlink message data in all nfnetlink users. Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-25 14:07:40 +00:00
static inline int rtnl_msg_family(const struct nlmsghdr *nlh)
[NET] rules: Unified rules dumping Implements a unified, protocol independant rules dumping function which is capable of both, dumping a specific protocol family or all of them. This speeds up dumping as less lookups are required. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-26 06:24:24 +00:00
{
if (nlmsg_len(nlh) >= sizeof(struct rtgenmsg))
return ((struct rtgenmsg *) nlmsg_data(nlh))->rtgen_family;
else
return AF_UNSPEC;
}
[RTNETLINK]: Link creation API Add rtnetlink API for creating, changing and deleting software devices. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-13 19:03:51 +00:00
/**
* struct rtnl_link_ops - rtnetlink link operations
*
* @list: Used internally
* @kind: Identifier
* @maxtype: Highest device specific netlink attribute number
* @policy: Netlink policy for device specific attribute validation
* @validate: Optional validation function for netlink/changelink parameters
* @priv_size: sizeof net_device private space
* @setup: net_device setup function
* @newlink: Function for configuring and registering a new device
* @changelink: Function for changing parameters of an existing device
* @dellink: Function to remove a device
* @get_size: Function to calculate required room for dumping device
* specific netlink attributes
* @fill_info: Function to dump device specific netlink attributes
* @get_xstats_size: Function to calculate required room for dumping devic
* specific statistics
* @fill_xstats: Function to dump device specific statistics
*/
struct rtnl_link_ops {
struct list_head list;
const char *kind;
size_t priv_size;
void (*setup)(struct net_device *dev);
int maxtype;
const struct nla_policy *policy;
int (*validate)(struct nlattr *tb[],
struct nlattr *data[]);
net: Support specifying the network namespace upon device creation. There is no good reason to not support userspace specifying the network namespace during device creation, and it makes it easier to create a network device and pass it to a child network namespace with a well known name. We have to be careful to ensure that the target network namespace for the new device exists through the life of the call. To keep that logic clear I have factored out the network namespace grabbing logic into rtnl_link_get_net. In addtion we need to continue to pass the source network namespace to the rtnl_link_ops.newlink method so that we can find the base device source network namespace. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2009-11-08 08:53:51 +00:00
int (*newlink)(struct net *src_net,
struct net_device *dev,
[RTNETLINK]: Link creation API Add rtnetlink API for creating, changing and deleting software devices. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-13 19:03:51 +00:00
struct nlattr *tb[],
struct nlattr *data[]);
int (*changelink)(struct net_device *dev,
struct nlattr *tb[],
struct nlattr *data[]);
net: add a list_head parameter to dellink() method Adding a list_head parameter to rtnl_link_ops->dellink() methods allow us to queue devices on a list, in order to dismantle them all at once. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27 07:06:36 +00:00
void (*dellink)(struct net_device *dev,
struct list_head *head);
[RTNETLINK]: Link creation API Add rtnetlink API for creating, changing and deleting software devices. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-13 19:03:51 +00:00
size_t (*get_size)(const struct net_device *dev);
int (*fill_info)(struct sk_buff *skb,
const struct net_device *dev);
size_t (*get_xstats_size)(const struct net_device *dev);
int (*fill_xstats)(struct sk_buff *skb,
const struct net_device *dev);
vlan: multiqueue vlan device vlan devices are currently not multi-queue capable. We can do that with a new rtnl_link_ops method, get_tx_queues(), called from rtnl_create_link() This new method gets num_tx_queues/real_num_tx_queues from real device. register_vlan_device() is also handled. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03 01:03:00 +00:00
int (*get_tx_queues)(struct net *net, struct nlattr *tb[],
unsigned int *tx_queues,
unsigned int *real_tx_queues);
[RTNETLINK]: Link creation API Add rtnetlink API for creating, changing and deleting software devices. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-13 19:03:51 +00:00
};
extern int __rtnl_link_register(struct rtnl_link_ops *ops);
extern void __rtnl_link_unregister(struct rtnl_link_ops *ops);
extern int rtnl_link_register(struct rtnl_link_ops *ops);
extern void rtnl_link_unregister(struct rtnl_link_ops *ops);
rtnetlink: Link address family API Each net_device contains address family specific data such as per device settings and statistics. We already expose this data via procfs/sysfs and partially netlink. The netlink method requires the requester to send one RTM_GETLINK request for each address family it wishes to receive data of and then merge this data itself. This patch implements a new API which combines all address family specific link data in a new netlink attribute IFLA_AF_SPEC. IFLA_AF_SPEC contains a sequence of nested attributes, one for each address family which in turn defines the structure of its own attribute. Example: [IFLA_AF_SPEC] = { [AF_INET] = { [IFLA_INET_CONF] = ..., }, [AF_INET6] = { [IFLA_INET6_FLAGS] = ..., [IFLA_INET6_CONF] = ..., } } The API also allows for address families to implement a function which parses the IFLA_AF_SPEC attribute sent by userspace to implement address family specific link options. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:30:14 +00:00
/**
* struct rtnl_af_ops - rtnetlink address family operations
*
* @list: Used internally
* @family: Address family
* @fill_link_af: Function to fill IFLA_AF_SPEC with address family
* specific netlink attributes.
* @get_link_af_size: Function to calculate size of address family specific
* netlink attributes exlusive the container attribute.
rtnl: make link af-specific updates atomic As David pointed out correctly, updates to af-specific attributes are currently not atomic. If multiple changes are requested and one of them fails, previous updates may have been applied already leaving the link behind in a undefined state. This patch splits the function parse_link_af() into two functions validate_link_af() and set_link_at(). validate_link_af() is placed to validate_linkmsg() check for errors as early as possible before any changes to the link have been made. set_link_af() is called to commit the changes later. This method is not fail proof, while it is currently sufficient to make set_link_af() inerrable and thus 100% atomic, the validation function method will not be able to detect all error scenarios in the future, there will likely always be errors depending on states which are f.e. not protected by rtnl_mutex and thus may change between validation and setting. Also, instead of silently ignoring unknown address families and config blocks for address families which did not register a set function the errors EAFNOSUPPORT respectively EOPNOSUPPORT are returned to avoid comitting 4 out of 5 update requests without notifying the user. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22 01:31:54 +00:00
* @validate_link_af: Validate a IFLA_AF_SPEC attribute, must check attr
* for invalid configuration settings.
* @set_link_af: Function to parse a IFLA_AF_SPEC attribute and modify
* net_device accordingly.
rtnetlink: Link address family API Each net_device contains address family specific data such as per device settings and statistics. We already expose this data via procfs/sysfs and partially netlink. The netlink method requires the requester to send one RTM_GETLINK request for each address family it wishes to receive data of and then merge this data itself. This patch implements a new API which combines all address family specific link data in a new netlink attribute IFLA_AF_SPEC. IFLA_AF_SPEC contains a sequence of nested attributes, one for each address family which in turn defines the structure of its own attribute. Example: [IFLA_AF_SPEC] = { [AF_INET] = { [IFLA_INET_CONF] = ..., }, [AF_INET6] = { [IFLA_INET6_FLAGS] = ..., [IFLA_INET6_CONF] = ..., } } The API also allows for address families to implement a function which parses the IFLA_AF_SPEC attribute sent by userspace to implement address family specific link options. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:30:14 +00:00
*/
struct rtnl_af_ops {
struct list_head list;
int family;
int (*fill_link_af)(struct sk_buff *skb,
const struct net_device *dev);
size_t (*get_link_af_size)(const struct net_device *dev);
rtnl: make link af-specific updates atomic As David pointed out correctly, updates to af-specific attributes are currently not atomic. If multiple changes are requested and one of them fails, previous updates may have been applied already leaving the link behind in a undefined state. This patch splits the function parse_link_af() into two functions validate_link_af() and set_link_at(). validate_link_af() is placed to validate_linkmsg() check for errors as early as possible before any changes to the link have been made. set_link_af() is called to commit the changes later. This method is not fail proof, while it is currently sufficient to make set_link_af() inerrable and thus 100% atomic, the validation function method will not be able to detect all error scenarios in the future, there will likely always be errors depending on states which are f.e. not protected by rtnl_mutex and thus may change between validation and setting. Also, instead of silently ignoring unknown address families and config blocks for address families which did not register a set function the errors EAFNOSUPPORT respectively EOPNOSUPPORT are returned to avoid comitting 4 out of 5 update requests without notifying the user. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22 01:31:54 +00:00
int (*validate_link_af)(const struct net_device *dev,
const struct nlattr *attr);
int (*set_link_af)(struct net_device *dev,
const struct nlattr *attr);
rtnetlink: Link address family API Each net_device contains address family specific data such as per device settings and statistics. We already expose this data via procfs/sysfs and partially netlink. The netlink method requires the requester to send one RTM_GETLINK request for each address family it wishes to receive data of and then merge this data itself. This patch implements a new API which combines all address family specific link data in a new netlink attribute IFLA_AF_SPEC. IFLA_AF_SPEC contains a sequence of nested attributes, one for each address family which in turn defines the structure of its own attribute. Example: [IFLA_AF_SPEC] = { [AF_INET] = { [IFLA_INET_CONF] = ..., }, [AF_INET6] = { [IFLA_INET6_FLAGS] = ..., [IFLA_INET6_CONF] = ..., } } The API also allows for address families to implement a function which parses the IFLA_AF_SPEC attribute sent by userspace to implement address family specific link options. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:30:14 +00:00
};
extern int __rtnl_af_register(struct rtnl_af_ops *ops);
extern void __rtnl_af_unregister(struct rtnl_af_ops *ops);
extern int rtnl_af_register(struct rtnl_af_ops *ops);
extern void rtnl_af_unregister(struct rtnl_af_ops *ops);
net: Support specifying the network namespace upon device creation. There is no good reason to not support userspace specifying the network namespace during device creation, and it makes it easier to create a network device and pass it to a child network namespace with a well known name. We have to be careful to ensure that the target network namespace for the new device exists through the life of the call. To keep that logic clear I have factored out the network namespace grabbing logic into rtnl_link_get_net. In addtion we need to continue to pass the source network namespace to the rtnl_link_ops.newlink method so that we can find the base device source network namespace. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2009-11-08 08:53:51 +00:00
extern struct net *rtnl_link_get_net(struct net *src_net, struct nlattr *tb[]);
extern struct net_device *rtnl_create_link(struct net *src_net, struct net *net,
char *ifname, const struct rtnl_link_ops *ops, struct nlattr *tb[]);
rtnetlink: support specifying device flags on device creation commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26 06:34:54 +00:00
extern int rtnl_configure_link(struct net_device *dev,
const struct ifinfomsg *ifm);
[RTNETLINK]: Introduce generic rtnl_create_link(). This routine gets the parsed rtnl attributes and creates a new link with generic info (IFLA_LINKINFO policy). Its intention is to help the drivers, that need to create several links at once (like VETH). This is nothing but a copy-paste-ed part of rtnl_newlink() function that is responsible for creation of new device. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-09 05:16:38 +00:00
extern const struct nla_policy ifla_policy[IFLA_MAX+1];
[RTNETLINK]: Link creation API Add rtnetlink API for creating, changing and deleting software devices. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-13 19:03:51 +00:00
#define MODULE_ALIAS_RTNL_LINK(kind) MODULE_ALIAS("rtnl-link-" kind)
[RTNL]: Message handler registration interface This patch adds a new interface to register rtnetlink message handlers replacing the exported rtnl_links[] array which required many message handlers to be exported unnecessarly. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:48:11 +00:00
#endif
Reference in New Issue Copy Permalink