Files
linux/drivers/gpu/drm/msm/msm_mdss.c

427 lines
9.8 KiB
C
Raw Normal View History

drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
/*
* SPDX-License-Identifier: GPL-2.0
* Copyright (c) 2018, The Linux Foundation
*/
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqdesc.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/pm_runtime.h>
#include "msm_drv.h"
#include "msm_kms.h"
/* for DPU_HW_* defines */
#include "disp/dpu1/dpu_hw_catalog.h"
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
#define HW_REV 0x0
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
#define HW_INTR_STATUS 0x0010
#define UBWC_STATIC 0x144
#define UBWC_CTRL_2 0x150
#define UBWC_PREDICTION_MODE 0x154
struct msm_mdss {
struct device *dev;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
void __iomem *mmio;
struct clk_bulk_data *clocks;
size_t num_clocks;
bool is_mdp5;
struct {
unsigned long enabled_mask;
struct irq_domain *domain;
} irq_controller;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
};
static void msm_mdss_irq(struct irq_desc *desc)
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
{
struct msm_mdss *msm_mdss = irq_desc_get_handler_data(desc);
drm/msm/dpu: Convert to a chained irq chip Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-01-03 11:06:02 -08:00
struct irq_chip *chip = irq_desc_get_chip(desc);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
u32 interrupts;
drm/msm/dpu: Convert to a chained irq chip Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-01-03 11:06:02 -08:00
chained_irq_enter(chip, desc);
interrupts = readl_relaxed(msm_mdss->mmio + HW_INTR_STATUS);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
while (interrupts) {
irq_hw_number_t hwirq = fls(interrupts) - 1;
int rc;
rc = generic_handle_domain_irq(msm_mdss->irq_controller.domain,
hwirq);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
if (rc < 0) {
dev_err(msm_mdss->dev, "handle irq fail: irq=%lu rc=%d\n",
hwirq, rc);
drm/msm/dpu: Convert to a chained irq chip Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-01-03 11:06:02 -08:00
break;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
}
interrupts &= ~(1 << hwirq);
}
drm/msm/dpu: Convert to a chained irq chip Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-01-03 11:06:02 -08:00
chained_irq_exit(chip, desc);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
}
static void msm_mdss_irq_mask(struct irq_data *irqd)
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
{
struct msm_mdss *msm_mdss = irq_data_get_irq_chip_data(irqd);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
/* memory barrier */
smp_mb__before_atomic();
clear_bit(irqd->hwirq, &msm_mdss->irq_controller.enabled_mask);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
/* memory barrier */
smp_mb__after_atomic();
}
static void msm_mdss_irq_unmask(struct irq_data *irqd)
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
{
struct msm_mdss *msm_mdss = irq_data_get_irq_chip_data(irqd);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
/* memory barrier */
smp_mb__before_atomic();
set_bit(irqd->hwirq, &msm_mdss->irq_controller.enabled_mask);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
/* memory barrier */
smp_mb__after_atomic();
}
static struct irq_chip msm_mdss_irq_chip = {
.name = "msm_mdss",
.irq_mask = msm_mdss_irq_mask,
.irq_unmask = msm_mdss_irq_unmask,
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
};
static struct lock_class_key msm_mdss_lock_key, msm_mdss_request_key;
drm/msm/dpu: Convert to a chained irq chip Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-01-03 11:06:02 -08:00
static int msm_mdss_irqdomain_map(struct irq_domain *domain,
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
unsigned int irq, irq_hw_number_t hwirq)
{
struct msm_mdss *msm_mdss = domain->host_data;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
irq_set_lockdep_class(irq, &msm_mdss_lock_key, &msm_mdss_request_key);
irq_set_chip_and_handler(irq, &msm_mdss_irq_chip, handle_level_irq);
return irq_set_chip_data(irq, msm_mdss);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
}
static const struct irq_domain_ops msm_mdss_irqdomain_ops = {
.map = msm_mdss_irqdomain_map,
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
.xlate = irq_domain_xlate_onecell,
};
static int _msm_mdss_irq_domain_add(struct msm_mdss *msm_mdss)
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
{
struct device *dev;
struct irq_domain *domain;
dev = msm_mdss->dev;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
domain = irq_domain_add_linear(dev->of_node, 32,
&msm_mdss_irqdomain_ops, msm_mdss);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
if (!domain) {
dev_err(dev, "failed to add irq_domain\n");
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
return -EINVAL;
}
msm_mdss->irq_controller.enabled_mask = 0;
msm_mdss->irq_controller.domain = domain;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
return 0;
}
static int msm_mdss_enable(struct msm_mdss *msm_mdss)
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
{
int ret;
ret = clk_bulk_prepare_enable(msm_mdss->num_clocks, msm_mdss->clocks);
if (ret) {
dev_err(msm_mdss->dev, "clock enable failed, ret:%d\n", ret);
return ret;
}
/*
* HW_REV requires MDSS_MDP_CLK, which is not enabled by the mdss on
* mdp5 hardware. Skip reading it for now.
*/
if (msm_mdss->is_mdp5)
return 0;
/*
* ubwc config is part of the "mdss" region which is not accessible
* from the rest of the driver. hardcode known configurations here
*/
switch (readl_relaxed(msm_mdss->mmio + HW_REV)) {
case DPU_HW_VER_500:
case DPU_HW_VER_501:
writel_relaxed(0x420, msm_mdss->mmio + UBWC_STATIC);
break;
case DPU_HW_VER_600:
/* TODO: 0x102e for LP_DDR4 */
writel_relaxed(0x103e, msm_mdss->mmio + UBWC_STATIC);
writel_relaxed(2, msm_mdss->mmio + UBWC_CTRL_2);
writel_relaxed(1, msm_mdss->mmio + UBWC_PREDICTION_MODE);
break;
case DPU_HW_VER_620:
writel_relaxed(0x1e, msm_mdss->mmio + UBWC_STATIC);
break;
case DPU_HW_VER_720:
writel_relaxed(0x101e, msm_mdss->mmio + UBWC_STATIC);
break;
}
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
return ret;
}
static int msm_mdss_disable(struct msm_mdss *msm_mdss)
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
{
clk_bulk_disable_unprepare(msm_mdss->num_clocks, msm_mdss->clocks);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
return 0;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
}
static void msm_mdss_destroy(struct msm_mdss *msm_mdss)
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
{
struct platform_device *pdev = to_platform_device(msm_mdss->dev);
drm/msm/dpu: Convert to a chained irq chip Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-01-03 11:06:02 -08:00
int irq;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
pm_runtime_suspend(msm_mdss->dev);
pm_runtime_disable(msm_mdss->dev);
irq_domain_remove(msm_mdss->irq_controller.domain);
msm_mdss->irq_controller.domain = NULL;
drm/msm/dpu: Convert to a chained irq chip Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-01-03 11:06:02 -08:00
irq = platform_get_irq(pdev, 0);
irq_set_chained_handler_and_data(irq, NULL, NULL);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
}
/*
* MDP5 MDSS uses at most three specified clocks.
*/
#define MDP5_MDSS_NUM_CLOCKS 3
static int mdp5_mdss_parse_clock(struct platform_device *pdev, struct clk_bulk_data **clocks)
{
struct clk_bulk_data *bulk;
int num_clocks = 0;
int ret;
if (!pdev)
return -EINVAL;
bulk = devm_kcalloc(&pdev->dev, MDP5_MDSS_NUM_CLOCKS, sizeof(struct clk_bulk_data), GFP_KERNEL);
if (!bulk)
return -ENOMEM;
bulk[num_clocks++].id = "iface";
bulk[num_clocks++].id = "bus";
bulk[num_clocks++].id = "vsync";
ret = devm_clk_bulk_get_optional(&pdev->dev, num_clocks, bulk);
if (ret)
return ret;
*clocks = bulk;
return num_clocks;
}
static struct msm_mdss *msm_mdss_init(struct platform_device *pdev, bool is_mdp5)
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
{
struct msm_mdss *msm_mdss;
int ret;
drm/msm/dpu: Convert to a chained irq chip Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-01-03 11:06:02 -08:00
int irq;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
msm_mdss = devm_kzalloc(&pdev->dev, sizeof(*msm_mdss), GFP_KERNEL);
if (!msm_mdss)
return ERR_PTR(-ENOMEM);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
msm_mdss->mmio = devm_platform_ioremap_resource_byname(pdev, is_mdp5 ? "mdss_phys" : "mdss");
if (IS_ERR(msm_mdss->mmio))
return ERR_CAST(msm_mdss->mmio);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
dev_dbg(&pdev->dev, "mapped mdss address space @%pK\n", msm_mdss->mmio);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
if (is_mdp5)
ret = mdp5_mdss_parse_clock(pdev, &msm_mdss->clocks);
else
ret = devm_clk_bulk_get_all(&pdev->dev, &msm_mdss->clocks);
if (ret < 0) {
dev_err(&pdev->dev, "failed to parse clocks, ret=%d\n", ret);
return ERR_PTR(ret);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
}
msm_mdss->num_clocks = ret;
msm_mdss->is_mdp5 = is_mdp5;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
msm_mdss->dev = &pdev->dev;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
drm/msm/dpu: Convert to a chained irq chip Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-01-03 11:06:02 -08:00
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return ERR_PTR(irq);
drm/msm/dpu: Convert to a chained irq chip Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-01-03 11:06:02 -08:00
ret = _msm_mdss_irq_domain_add(msm_mdss);
if (ret)
return ERR_PTR(ret);
irq_set_chained_handler_and_data(irq, msm_mdss_irq,
msm_mdss);
pm_runtime_enable(&pdev->dev);
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
return msm_mdss;
drm/msm: Add SDM845 DPU support SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-27 15:26:09 -04:00
}
static int __maybe_unused mdss_runtime_suspend(struct device *dev)
{
struct msm_drm_private *priv = dev_get_drvdata(dev);
DBG("");
return msm_mdss_disable(priv->mdss);
}
static int __maybe_unused mdss_runtime_resume(struct device *dev)
{
struct msm_drm_private *priv = dev_get_drvdata(dev);
DBG("");
return msm_mdss_enable(priv->mdss);
}
static int __maybe_unused mdss_pm_suspend(struct device *dev)
{
if (pm_runtime_suspended(dev))
return 0;
return mdss_runtime_suspend(dev);
}
static int __maybe_unused mdss_pm_resume(struct device *dev)
{
if (pm_runtime_suspended(dev))
return 0;
return mdss_runtime_resume(dev);
}
static const struct dev_pm_ops mdss_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mdss_pm_suspend, mdss_pm_resume)
SET_RUNTIME_PM_OPS(mdss_runtime_suspend, mdss_runtime_resume, NULL)
.prepare = msm_pm_prepare,
.complete = msm_pm_complete,
};
static int find_mdp_node(struct device *dev, void *data)
{
return of_match_node(dpu_dt_match, dev->of_node) ||
of_match_node(mdp5_dt_match, dev->of_node);
}
static int mdss_probe(struct platform_device *pdev)
{
struct msm_mdss *mdss;
struct msm_drm_private *priv;
bool is_mdp5 = of_device_is_compatible(pdev->dev.of_node, "qcom,mdss");
struct device *mdp_dev;
struct device *dev = &pdev->dev;
int ret;
mdss = msm_mdss_init(pdev, is_mdp5);
if (IS_ERR(mdss))
return PTR_ERR(mdss);
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
goto fail;
}
priv->mdss = mdss;
platform_set_drvdata(pdev, priv);
/*
* MDP5/DPU based devices don't have a flat hierarchy. There is a top
* level parent: MDSS, and children: MDP5/DPU, DSI, HDMI, eDP etc.
* Populate the children devices, find the MDP5/DPU node, and then add
* the interfaces to our components list.
*/
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
if (ret) {
DRM_DEV_ERROR(dev, "failed to populate children devices\n");
goto fail;
}
mdp_dev = device_find_child(dev, NULL, find_mdp_node);
if (!mdp_dev) {
DRM_DEV_ERROR(dev, "failed to find MDSS MDP node\n");
of_platform_depopulate(dev);
ret = -ENODEV;
goto fail;
}
/*
* on MDP5 based platforms, the MDSS platform device is the component
* that adds MDP5 and other display interface components to
* itself.
*/
ret = msm_drv_probe(dev, mdp_dev);
put_device(mdp_dev);
if (ret)
goto fail;
return 0;
fail:
of_platform_depopulate(dev);
msm_mdss_destroy(priv->mdss);
return ret;
}
static int mdss_remove(struct platform_device *pdev)
{
struct msm_drm_private *priv = platform_get_drvdata(pdev);
struct msm_mdss *mdss = priv->mdss;
component_master_del(&pdev->dev, &msm_drm_ops);
of_platform_depopulate(&pdev->dev);
msm_mdss_destroy(mdss);
return 0;
}
static const struct of_device_id mdss_dt_match[] = {
{ .compatible = "qcom,mdss" },
{ .compatible = "qcom,msm8998-mdss" },
{ .compatible = "qcom,qcm2290-mdss" },
{ .compatible = "qcom,sdm845-mdss" },
{ .compatible = "qcom,sc7180-mdss" },
{ .compatible = "qcom,sc7280-mdss" },
{ .compatible = "qcom,sc8180x-mdss" },
{ .compatible = "qcom,sm8150-mdss" },
{ .compatible = "qcom,sm8250-mdss" },
{}
};
MODULE_DEVICE_TABLE(of, mdss_dt_match);
static struct platform_driver mdss_platform_driver = {
.probe = mdss_probe,
.remove = mdss_remove,
.shutdown = msm_drv_shutdown,
.driver = {
.name = "msm-mdss",
.of_match_table = mdss_dt_match,
.pm = &mdss_pm_ops,
},
};
void __init msm_mdss_register(void)
{
platform_driver_register(&mdss_platform_driver);
}
void __exit msm_mdss_unregister(void)
{
platform_driver_unregister(&mdss_platform_driver);
}