linux/crypto/Kconfig

1870 lines
54 KiB
Plaintext
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
# SPDX-License-Identifier: GPL-2.0
#
# Generic algorithms support
#
config XOR_BLOCKS
tristate
#
async_tx: add the async_tx api The async_tx api provides methods for describing a chain of asynchronous bulk memory transfers/transforms with support for inter-transactional dependencies. It is implemented as a dmaengine client that smooths over the details of different hardware offload engine implementations. Code that is written to the api can optimize for asynchronous operation and the api will fit the chain of operations to the available offload resources. I imagine that any piece of ADMA hardware would register with the 'async_*' subsystem, and a call to async_X would be routed as appropriate, or be run in-line. - Neil Brown async_tx exploits the capabilities of struct dma_async_tx_descriptor to provide an api of the following general format: struct dma_async_tx_descriptor * async_<operation>(..., struct dma_async_tx_descriptor *depend_tx, dma_async_tx_callback cb_fn, void *cb_param) { struct dma_chan *chan = async_tx_find_channel(depend_tx, <operation>); struct dma_device *device = chan ? chan->device : NULL; int int_en = cb_fn ? 1 : 0; struct dma_async_tx_descriptor *tx = device ? device->device_prep_dma_<operation>(chan, len, int_en) : NULL; if (tx) { /* run <operation> asynchronously */ ... tx->tx_set_dest(addr, tx, index); ... tx->tx_set_src(addr, tx, index); ... async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param); } else { /* run <operation> synchronously */ ... <operation> ... async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param); } return tx; } async_tx_find_channel() returns a capable channel from its pool. The channel pool is organized as a per-cpu array of channel pointers. The async_tx_rebalance() routine is tasked with managing these arrays. In the uniprocessor case async_tx_rebalance() tries to spread responsibility evenly over channels of similar capabilities. For example if there are two copy+xor channels, one will handle copy operations and the other will handle xor. In the SMP case async_tx_rebalance() attempts to spread the operations evenly over the cpus, e.g. cpu0 gets copy channel0 and xor channel0 while cpu1 gets copy channel 1 and xor channel 1. When a dependency is specified async_tx_find_channel defaults to keeping the operation on the same channel. A xor->copy->xor chain will stay on one channel if it supports both operation types, otherwise the transaction will transition between a copy and a xor resource. Currently the raid5 implementation in the MD raid456 driver has been converted to the async_tx api. A driver for the offload engines on the Intel Xscale series of I/O processors, iop-adma, is provided in a later commit. With the iop-adma driver and async_tx, raid456 is able to offload copy, xor, and xor-zero-sum operations to hardware engines. On iop342 tiobench showed higher throughput for sequential writes (20 - 30% improvement) and sequential reads to a degraded array (40 - 55% improvement). For the other cases performance was roughly equal, +/- a few percentage points. On a x86-smp platform the performance of the async_tx implementation (in synchronous mode) was also +/- a few percentage points of the original implementation. According to 'top' on iop342 CPU utilization drops from ~50% to ~15% during a 'resync' while the speed according to /proc/mdstat doubles from ~25 MB/s to ~50 MB/s. The tiobench command line used for testing was: tiobench --size 2048 --block 4096 --block 131072 --dir /mnt/raid --numruns 5 * iop342 had 1GB of memory available Details: * if CONFIG_DMA_ENGINE=n the asynchronous path is compiled away by making async_tx_find_channel a static inline routine that always returns NULL * when a callback is specified for a given transaction an interrupt will fire at operation completion time and the callback will occur in a tasklet. if the the channel does not support interrupts then a live polling wait will be performed * the api is written as a dmaengine client that requests all available channels * In support of dependencies the api implicitly schedules channel-switch interrupts. The interrupt triggers the cleanup tasklet which causes pending operations to be scheduled on the next channel * Xor engines treat an xor destination address differently than a software xor routine. To the software routine the destination address is an implied source, whereas engines treat it as a write-only destination. This patch modifies the xor_blocks routine to take a an explicit destination address to mirror the hardware. Changelog: * fixed a leftover debug print * don't allow callbacks in async_interrupt_cond * fixed xor_block changes * fixed usage of ASYNC_TX_XOR_DROP_DEST * drop dma mapping methods, suggested by Chris Leech * printk warning fixups from Andrew Morton * don't use inline in C files, Adrian Bunk * select the API when MD is enabled * BUG_ON xor source counts <= 1 * implicitly handle hardware concerns like channel switching and interrupts, Neil Brown * remove the per operation type list, and distribute operation capabilities evenly amongst the available channels * simplify async_tx_find_channel to optimize the fast path * introduce the channel_table_initialized flag to prevent early calls to the api * reorganize the code to mimic crypto * include mm.h as not all archs include it in dma-mapping.h * make the Kconfig options non-user visible, Adrian Bunk * move async_tx under crypto since it is meant as 'core' functionality, and the two may share algorithms in the future * move large inline functions into c files * checkpatch.pl fixes * gpl v2 only correction Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-By: NeilBrown <neilb@suse.de>
2007-01-02 18:10:44 +00:00
# async_tx api: hardware offloaded memory transfer/transform support
#
async_tx: add the async_tx api The async_tx api provides methods for describing a chain of asynchronous bulk memory transfers/transforms with support for inter-transactional dependencies. It is implemented as a dmaengine client that smooths over the details of different hardware offload engine implementations. Code that is written to the api can optimize for asynchronous operation and the api will fit the chain of operations to the available offload resources. I imagine that any piece of ADMA hardware would register with the 'async_*' subsystem, and a call to async_X would be routed as appropriate, or be run in-line. - Neil Brown async_tx exploits the capabilities of struct dma_async_tx_descriptor to provide an api of the following general format: struct dma_async_tx_descriptor * async_<operation>(..., struct dma_async_tx_descriptor *depend_tx, dma_async_tx_callback cb_fn, void *cb_param) { struct dma_chan *chan = async_tx_find_channel(depend_tx, <operation>); struct dma_device *device = chan ? chan->device : NULL; int int_en = cb_fn ? 1 : 0; struct dma_async_tx_descriptor *tx = device ? device->device_prep_dma_<operation>(chan, len, int_en) : NULL; if (tx) { /* run <operation> asynchronously */ ... tx->tx_set_dest(addr, tx, index); ... tx->tx_set_src(addr, tx, index); ... async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param); } else { /* run <operation> synchronously */ ... <operation> ... async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param); } return tx; } async_tx_find_channel() returns a capable channel from its pool. The channel pool is organized as a per-cpu array of channel pointers. The async_tx_rebalance() routine is tasked with managing these arrays. In the uniprocessor case async_tx_rebalance() tries to spread responsibility evenly over channels of similar capabilities. For example if there are two copy+xor channels, one will handle copy operations and the other will handle xor. In the SMP case async_tx_rebalance() attempts to spread the operations evenly over the cpus, e.g. cpu0 gets copy channel0 and xor channel0 while cpu1 gets copy channel 1 and xor channel 1. When a dependency is specified async_tx_find_channel defaults to keeping the operation on the same channel. A xor->copy->xor chain will stay on one channel if it supports both operation types, otherwise the transaction will transition between a copy and a xor resource. Currently the raid5 implementation in the MD raid456 driver has been converted to the async_tx api. A driver for the offload engines on the Intel Xscale series of I/O processors, iop-adma, is provided in a later commit. With the iop-adma driver and async_tx, raid456 is able to offload copy, xor, and xor-zero-sum operations to hardware engines. On iop342 tiobench showed higher throughput for sequential writes (20 - 30% improvement) and sequential reads to a degraded array (40 - 55% improvement). For the other cases performance was roughly equal, +/- a few percentage points. On a x86-smp platform the performance of the async_tx implementation (in synchronous mode) was also +/- a few percentage points of the original implementation. According to 'top' on iop342 CPU utilization drops from ~50% to ~15% during a 'resync' while the speed according to /proc/mdstat doubles from ~25 MB/s to ~50 MB/s. The tiobench command line used for testing was: tiobench --size 2048 --block 4096 --block 131072 --dir /mnt/raid --numruns 5 * iop342 had 1GB of memory available Details: * if CONFIG_DMA_ENGINE=n the asynchronous path is compiled away by making async_tx_find_channel a static inline routine that always returns NULL * when a callback is specified for a given transaction an interrupt will fire at operation completion time and the callback will occur in a tasklet. if the the channel does not support interrupts then a live polling wait will be performed * the api is written as a dmaengine client that requests all available channels * In support of dependencies the api implicitly schedules channel-switch interrupts. The interrupt triggers the cleanup tasklet which causes pending operations to be scheduled on the next channel * Xor engines treat an xor destination address differently than a software xor routine. To the software routine the destination address is an implied source, whereas engines treat it as a write-only destination. This patch modifies the xor_blocks routine to take a an explicit destination address to mirror the hardware. Changelog: * fixed a leftover debug print * don't allow callbacks in async_interrupt_cond * fixed xor_block changes * fixed usage of ASYNC_TX_XOR_DROP_DEST * drop dma mapping methods, suggested by Chris Leech * printk warning fixups from Andrew Morton * don't use inline in C files, Adrian Bunk * select the API when MD is enabled * BUG_ON xor source counts <= 1 * implicitly handle hardware concerns like channel switching and interrupts, Neil Brown * remove the per operation type list, and distribute operation capabilities evenly amongst the available channels * simplify async_tx_find_channel to optimize the fast path * introduce the channel_table_initialized flag to prevent early calls to the api * reorganize the code to mimic crypto * include mm.h as not all archs include it in dma-mapping.h * make the Kconfig options non-user visible, Adrian Bunk * move async_tx under crypto since it is meant as 'core' functionality, and the two may share algorithms in the future * move large inline functions into c files * checkpatch.pl fixes * gpl v2 only correction Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-By: NeilBrown <neilb@suse.de>
2007-01-02 18:10:44 +00:00
source "crypto/async_tx/Kconfig"
async_tx: add the async_tx api The async_tx api provides methods for describing a chain of asynchronous bulk memory transfers/transforms with support for inter-transactional dependencies. It is implemented as a dmaengine client that smooths over the details of different hardware offload engine implementations. Code that is written to the api can optimize for asynchronous operation and the api will fit the chain of operations to the available offload resources. I imagine that any piece of ADMA hardware would register with the 'async_*' subsystem, and a call to async_X would be routed as appropriate, or be run in-line. - Neil Brown async_tx exploits the capabilities of struct dma_async_tx_descriptor to provide an api of the following general format: struct dma_async_tx_descriptor * async_<operation>(..., struct dma_async_tx_descriptor *depend_tx, dma_async_tx_callback cb_fn, void *cb_param) { struct dma_chan *chan = async_tx_find_channel(depend_tx, <operation>); struct dma_device *device = chan ? chan->device : NULL; int int_en = cb_fn ? 1 : 0; struct dma_async_tx_descriptor *tx = device ? device->device_prep_dma_<operation>(chan, len, int_en) : NULL; if (tx) { /* run <operation> asynchronously */ ... tx->tx_set_dest(addr, tx, index); ... tx->tx_set_src(addr, tx, index); ... async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param); } else { /* run <operation> synchronously */ ... <operation> ... async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param); } return tx; } async_tx_find_channel() returns a capable channel from its pool. The channel pool is organized as a per-cpu array of channel pointers. The async_tx_rebalance() routine is tasked with managing these arrays. In the uniprocessor case async_tx_rebalance() tries to spread responsibility evenly over channels of similar capabilities. For example if there are two copy+xor channels, one will handle copy operations and the other will handle xor. In the SMP case async_tx_rebalance() attempts to spread the operations evenly over the cpus, e.g. cpu0 gets copy channel0 and xor channel0 while cpu1 gets copy channel 1 and xor channel 1. When a dependency is specified async_tx_find_channel defaults to keeping the operation on the same channel. A xor->copy->xor chain will stay on one channel if it supports both operation types, otherwise the transaction will transition between a copy and a xor resource. Currently the raid5 implementation in the MD raid456 driver has been converted to the async_tx api. A driver for the offload engines on the Intel Xscale series of I/O processors, iop-adma, is provided in a later commit. With the iop-adma driver and async_tx, raid456 is able to offload copy, xor, and xor-zero-sum operations to hardware engines. On iop342 tiobench showed higher throughput for sequential writes (20 - 30% improvement) and sequential reads to a degraded array (40 - 55% improvement). For the other cases performance was roughly equal, +/- a few percentage points. On a x86-smp platform the performance of the async_tx implementation (in synchronous mode) was also +/- a few percentage points of the original implementation. According to 'top' on iop342 CPU utilization drops from ~50% to ~15% during a 'resync' while the speed according to /proc/mdstat doubles from ~25 MB/s to ~50 MB/s. The tiobench command line used for testing was: tiobench --size 2048 --block 4096 --block 131072 --dir /mnt/raid --numruns 5 * iop342 had 1GB of memory available Details: * if CONFIG_DMA_ENGINE=n the asynchronous path is compiled away by making async_tx_find_channel a static inline routine that always returns NULL * when a callback is specified for a given transaction an interrupt will fire at operation completion time and the callback will occur in a tasklet. if the the channel does not support interrupts then a live polling wait will be performed * the api is written as a dmaengine client that requests all available channels * In support of dependencies the api implicitly schedules channel-switch interrupts. The interrupt triggers the cleanup tasklet which causes pending operations to be scheduled on the next channel * Xor engines treat an xor destination address differently than a software xor routine. To the software routine the destination address is an implied source, whereas engines treat it as a write-only destination. This patch modifies the xor_blocks routine to take a an explicit destination address to mirror the hardware. Changelog: * fixed a leftover debug print * don't allow callbacks in async_interrupt_cond * fixed xor_block changes * fixed usage of ASYNC_TX_XOR_DROP_DEST * drop dma mapping methods, suggested by Chris Leech * printk warning fixups from Andrew Morton * don't use inline in C files, Adrian Bunk * select the API when MD is enabled * BUG_ON xor source counts <= 1 * implicitly handle hardware concerns like channel switching and interrupts, Neil Brown * remove the per operation type list, and distribute operation capabilities evenly amongst the available channels * simplify async_tx_find_channel to optimize the fast path * introduce the channel_table_initialized flag to prevent early calls to the api * reorganize the code to mimic crypto * include mm.h as not all archs include it in dma-mapping.h * make the Kconfig options non-user visible, Adrian Bunk * move async_tx under crypto since it is meant as 'core' functionality, and the two may share algorithms in the future * move large inline functions into c files * checkpatch.pl fixes * gpl v2 only correction Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-By: NeilBrown <neilb@suse.de>
2007-01-02 18:10:44 +00:00
#
# Cryptographic API Configuration
#
menuconfig CRYPTO
tristate "Cryptographic API"
help
This option provides the core Cryptographic API.
if CRYPTO
comment "Crypto core or helper"
config CRYPTO_FIPS
bool "FIPS 200 compliance"
depends on (CRYPTO_ANSI_CPRNG || CRYPTO_DRBG) && !CRYPTO_MANAGER_DISABLE_TESTS
depends on (MODULE_SIG || !MODULES)
help
This options enables the fips boot option which is
required if you want to system to operate in a FIPS 200
certification. You should say no unless you know what
this is.
config CRYPTO_ALGAPI
tristate
select CRYPTO_ALGAPI2
help
This option provides the API for cryptographic algorithms.
config CRYPTO_ALGAPI2
tristate
config CRYPTO_AEAD
tristate
select CRYPTO_AEAD2
select CRYPTO_ALGAPI
config CRYPTO_AEAD2
tristate
select CRYPTO_ALGAPI2
select CRYPTO_NULL2
select CRYPTO_RNG2
config CRYPTO_BLKCIPHER
tristate
select CRYPTO_BLKCIPHER2
select CRYPTO_ALGAPI
config CRYPTO_BLKCIPHER2
tristate
select CRYPTO_ALGAPI2
select CRYPTO_RNG2
select CRYPTO_WORKQUEUE
config CRYPTO_HASH
tristate
select CRYPTO_HASH2
select CRYPTO_ALGAPI
config CRYPTO_HASH2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_RNG
tristate
select CRYPTO_RNG2
select CRYPTO_ALGAPI
config CRYPTO_RNG2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_RNG_DEFAULT
tristate
select CRYPTO_DRBG_MENU
config CRYPTO_AKCIPHER2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_AKCIPHER
tristate
select CRYPTO_AKCIPHER2
select CRYPTO_ALGAPI
config CRYPTO_KPP2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_KPP
tristate
select CRYPTO_ALGAPI
select CRYPTO_KPP2
config CRYPTO_ACOMP2
tristate
select CRYPTO_ALGAPI2
select SGL_ALLOC
config CRYPTO_ACOMP
tristate
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
config CRYPTO_RSA
tristate "RSA algorithm"
select CRYPTO_AKCIPHER
select CRYPTO_MANAGER
select MPILIB
select ASN1
help
Generic implementation of the RSA public key algorithm.
config CRYPTO_DH
tristate "Diffie-Hellman algorithm"
select CRYPTO_KPP
select MPILIB
help
Generic implementation of the Diffie-Hellman algorithm.
config CRYPTO_ECDH
tristate "ECDH algorithm"
select CRYPTO_KPP
select CRYPTO_RNG_DEFAULT
help
Generic implementation of the ECDH algorithm
config CRYPTO_MANAGER
tristate "Cryptographic algorithm manager"
select CRYPTO_MANAGER2
help
Create default cryptographic template instantiations such as
cbc(aes).
config CRYPTO_MANAGER2
def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
select CRYPTO_AEAD2
select CRYPTO_HASH2
select CRYPTO_BLKCIPHER2
select CRYPTO_AKCIPHER2
select CRYPTO_KPP2
select CRYPTO_ACOMP2
config CRYPTO_USER
tristate "Userspace cryptographic algorithm configuration"
depends on NET
select CRYPTO_MANAGER
help
Userspace configuration for cryptographic instantiations such as
cbc(aes).
config CRYPTO_MANAGER_DISABLE_TESTS
bool "Disable run-time self tests"
default y
depends on CRYPTO_MANAGER2
help
Disable run-time self tests that normally take place at
algorithm registration.
config CRYPTO_GF128MUL
tristate "GF(2^128) multiplication functions"
help
Efficient table driven implementation of multiplications in the
field GF(2^128). This is needed by some cypher modes. This
option will be selected automatically if you select such a
cipher mode. Only select this option by hand if you expect to load
an external module that requires these functions.
config CRYPTO_NULL
tristate "Null algorithms"
select CRYPTO_NULL2
help
These are 'Null' algorithms, used by IPsec, which do nothing.
config CRYPTO_NULL2
tristate
select CRYPTO_ALGAPI2
select CRYPTO_BLKCIPHER2
select CRYPTO_HASH2
config CRYPTO_PCRYPT
tristate "Parallel crypto engine"
depends on SMP
select PADATA
select CRYPTO_MANAGER
select CRYPTO_AEAD
help
This converts an arbitrary crypto algorithm into a parallel
algorithm that executes in kernel threads.
config CRYPTO_WORKQUEUE
tristate
config CRYPTO_CRYPTD
tristate "Software async crypto daemon"
select CRYPTO_BLKCIPHER
select CRYPTO_HASH
select CRYPTO_MANAGER
crypto: cryptd - Per-CPU thread implementation based on kcrypto_wq Original cryptd thread implementation has scalability issue, this patch solve the issue with a per-CPU thread implementation. struct cryptd_queue is defined to be a per-CPU queue, which holds one struct cryptd_cpu_queue for each CPU. In struct cryptd_cpu_queue, a struct crypto_queue holds all requests for the CPU, a struct work_struct is used to run all requests for the CPU. Testing based on dm-crypt on an Intel Core 2 E6400 (two cores) machine shows 19.2% performance gain. The testing script is as follow: -------------------- script begin --------------------------- #!/bin/sh dmc_create() { # Create a crypt device using dmsetup dmsetup create $2 --table "0 `blockdev --getsize $1` crypt cbc(aes-asm)?cryptd?plain:plain babebabebabebabebabebabebabebabe 0 $1 0" } dmsetup remove crypt0 dmsetup remove crypt1 dd if=/dev/zero of=/dev/ram0 bs=1M count=4 >& /dev/null dd if=/dev/zero of=/dev/ram1 bs=1M count=4 >& /dev/null dmc_create /dev/ram0 crypt0 dmc_create /dev/ram1 crypt1 cat >tr.sh <<EOF #!/bin/sh for n in \$(seq 10); do dd if=/dev/dm-0 of=/dev/null >& /dev/null & dd if=/dev/dm-1 of=/dev/null >& /dev/null & done wait EOF for n in $(seq 10); do /usr/bin/time sh tr.sh done rm tr.sh -------------------- script end --------------------------- The separator of dm-crypt parameter is changed from "-" to "?", because "-" is used in some cipher driver name too, and cryptds need to specify cipher driver name instead of cipher name. The test result on an Intel Core2 E6400 (two cores) is as follow: without patch: -----------------wo begin -------------------------- 0.04user 0.38system 0:00.39elapsed 107%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6566minor)pagefaults 0swaps 0.07user 0.35system 0:00.35elapsed 121%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6567minor)pagefaults 0swaps 0.06user 0.34system 0:00.30elapsed 135%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.05user 0.37system 0:00.36elapsed 119%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6607minor)pagefaults 0swaps 0.06user 0.36system 0:00.35elapsed 120%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.05user 0.37system 0:00.31elapsed 136%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6594minor)pagefaults 0swaps 0.04user 0.34system 0:00.30elapsed 126%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6597minor)pagefaults 0swaps 0.06user 0.32system 0:00.31elapsed 125%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6571minor)pagefaults 0swaps 0.06user 0.34system 0:00.31elapsed 134%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6581minor)pagefaults 0swaps 0.05user 0.38system 0:00.31elapsed 138%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6600minor)pagefaults 0swaps -----------------wo end -------------------------- with patch: ------------------w begin -------------------------- 0.02user 0.31system 0:00.24elapsed 141%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6554minor)pagefaults 0swaps 0.05user 0.34system 0:00.31elapsed 127%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6606minor)pagefaults 0swaps 0.07user 0.33system 0:00.26elapsed 155%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6559minor)pagefaults 0swaps 0.07user 0.32system 0:00.26elapsed 151%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.05user 0.34system 0:00.26elapsed 150%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6603minor)pagefaults 0swaps 0.03user 0.36system 0:00.31elapsed 124%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.04user 0.35system 0:00.26elapsed 147%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6586minor)pagefaults 0swaps 0.03user 0.37system 0:00.27elapsed 146%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.04user 0.36system 0:00.26elapsed 154%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6594minor)pagefaults 0swaps 0.04user 0.35system 0:00.26elapsed 154%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6557minor)pagefaults 0swaps ------------------w end -------------------------- The middle value of elapsed time is: wo cryptwq: 0.31 w cryptwq: 0.26 The performance gain is about (0.31-0.26)/0.26 = 0.192. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-19 06:42:19 +00:00
select CRYPTO_WORKQUEUE
help
This is a generic software asynchronous crypto daemon that
converts an arbitrary synchronous software crypto algorithm
into an asynchronous algorithm that executes in a kernel thread.
config CRYPTO_MCRYPTD
tristate "Software async multi-buffer crypto daemon"
select CRYPTO_BLKCIPHER
select CRYPTO_HASH
select CRYPTO_MANAGER
select CRYPTO_WORKQUEUE
help
This is a generic software asynchronous crypto daemon that
provides the kernel thread to assist multi-buffer crypto
algorithms for submitting jobs and flushing jobs in multi-buffer
crypto algorithms. Multi-buffer crypto algorithms are executed
in the context of this kernel thread and drivers can post
their crypto request asynchronously to be processed by this daemon.
config CRYPTO_AUTHENC
tristate "Authenc support"
select CRYPTO_AEAD
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_HASH
select CRYPTO_NULL
help
Authenc: Combined mode wrapper for IPsec.
This is required for IPSec.
config CRYPTO_TEST
tristate "Testing module"
depends on m
select CRYPTO_MANAGER
help
Quick & dirty crypto test module.
config CRYPTO_SIMD
tristate
select CRYPTO_CRYPTD
config CRYPTO_GLUE_HELPER_X86
tristate
depends on X86
select CRYPTO_BLKCIPHER
config CRYPTO_ENGINE
tristate
comment "Authenticated Encryption with Associated Data"
config CRYPTO_CCM
tristate "CCM support"
select CRYPTO_CTR
select CRYPTO_HASH
select CRYPTO_AEAD
help
Support for Counter with CBC MAC. Required for IPsec.
config CRYPTO_GCM
tristate "GCM/GMAC support"
select CRYPTO_CTR
select CRYPTO_AEAD
select CRYPTO_GHASH
select CRYPTO_NULL
help
Support for Galois/Counter Mode (GCM) and Galois Message
Authentication Code (GMAC). Required for IPSec.
config CRYPTO_CHACHA20POLY1305
tristate "ChaCha20-Poly1305 AEAD support"
select CRYPTO_CHACHA20
select CRYPTO_POLY1305
select CRYPTO_AEAD
help
ChaCha20-Poly1305 AEAD support, RFC7539.
Support for the AEAD wrapper using the ChaCha20 stream cipher combined
with the Poly1305 authenticator. It is defined in RFC7539 for use in
IETF protocols.
config CRYPTO_AEGIS128
tristate "AEGIS-128 AEAD algorithm"
select CRYPTO_AEAD
select CRYPTO_AES # for AES S-box tables
help
Support for the AEGIS-128 dedicated AEAD algorithm.
config CRYPTO_AEGIS128L
tristate "AEGIS-128L AEAD algorithm"
select CRYPTO_AEAD
select CRYPTO_AES # for AES S-box tables
help
Support for the AEGIS-128L dedicated AEAD algorithm.
config CRYPTO_AEGIS256
tristate "AEGIS-256 AEAD algorithm"
select CRYPTO_AEAD
select CRYPTO_AES # for AES S-box tables
help
Support for the AEGIS-256 dedicated AEAD algorithm.
config CRYPTO_AEGIS128_AESNI_SSE2
tristate "AEGIS-128 AEAD algorithm (x86_64 AESNI+SSE2 implementation)"
depends on X86 && 64BIT
select CRYPTO_AEAD
select CRYPTO_CRYPTD
help
AESNI+SSE2 implementation of the AEGSI-128 dedicated AEAD algorithm.
config CRYPTO_AEGIS128L_AESNI_SSE2
tristate "AEGIS-128L AEAD algorithm (x86_64 AESNI+SSE2 implementation)"
depends on X86 && 64BIT
select CRYPTO_AEAD
select CRYPTO_CRYPTD
help
AESNI+SSE2 implementation of the AEGSI-128L dedicated AEAD algorithm.
config CRYPTO_AEGIS256_AESNI_SSE2
tristate "AEGIS-256 AEAD algorithm (x86_64 AESNI+SSE2 implementation)"
depends on X86 && 64BIT
select CRYPTO_AEAD
select CRYPTO_CRYPTD
help
AESNI+SSE2 implementation of the AEGSI-256 dedicated AEAD algorithm.
config CRYPTO_MORUS640
tristate "MORUS-640 AEAD algorithm"
select CRYPTO_AEAD
help
Support for the MORUS-640 dedicated AEAD algorithm.
config CRYPTO_MORUS1280
tristate "MORUS-1280 AEAD algorithm"
select CRYPTO_AEAD
help
Support for the MORUS-1280 dedicated AEAD algorithm.
config CRYPTO_SEQIV
tristate "Sequence Number IV Generator"
select CRYPTO_AEAD
select CRYPTO_BLKCIPHER
select CRYPTO_NULL
select CRYPTO_RNG_DEFAULT
help
This IV generator generates an IV based on a sequence number by
xoring it with a salt. This algorithm is mainly useful for CTR
config CRYPTO_ECHAINIV
tristate "Encrypted Chain IV Generator"
select CRYPTO_AEAD
select CRYPTO_NULL
select CRYPTO_RNG_DEFAULT
default m
help
This IV generator generates an IV based on the encryption of
a sequence number xored with a salt. This is the default
algorithm for CBC.
comment "Block modes"
config CRYPTO_CBC
tristate "CBC support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
help
CBC: Cipher Block Chaining mode
This block cipher algorithm is required for IPSec.
config CRYPTO_CFB
tristate "CFB support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
help
CFB: Cipher FeedBack mode
This block cipher algorithm is required for TPM2 Cryptography.
config CRYPTO_CTR
tristate "CTR support"
select CRYPTO_BLKCIPHER
select CRYPTO_SEQIV
select CRYPTO_MANAGER
help
CTR: Counter mode
This block cipher algorithm is required for IPSec.
config CRYPTO_CTS
tristate "CTS support"
select CRYPTO_BLKCIPHER
help
CTS: Cipher Text Stealing
This is the Cipher Text Stealing mode as described by
Section 8 of rfc2040 and referenced by rfc3962.
(rfc3962 includes errata information in its Appendix A)
This mode is required for Kerberos gss mechanism support
for AES encryption.
config CRYPTO_ECB
tristate "ECB support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
help
ECB: Electronic CodeBook mode
This is the simplest block cipher algorithm. It simply encrypts
the input block by block.
config CRYPTO_LRW
tristate "LRW support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_GF128MUL
help
LRW: Liskov Rivest Wagner, a tweakable, non malleable, non movable
narrow block cipher mode for dm-crypt. Use it with cipher
specification string aes-lrw-benbi, the key must be 256, 320 or 384.
The first 128, 192 or 256 bits in the key are used for AES and the
rest is used to tie each cipher block to its logical position.
config CRYPTO_PCBC
tristate "PCBC support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
help
PCBC: Propagating Cipher Block Chaining mode
This block cipher algorithm is required for RxRPC.
config CRYPTO_XTS
tristate "XTS support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_ECB
help
XTS: IEEE1619/D16 narrow block cipher use with aes-xts-plain,
key size 256, 384 or 512 bits. This implementation currently
can't handle a sectorsize which is not a multiple of 16 bytes.
config CRYPTO_KEYWRAP
tristate "Key wrapping support"
select CRYPTO_BLKCIPHER
help
Support for key wrapping (NIST SP800-38F / RFC3394) without
padding.
comment "Hash modes"
config CRYPTO_CMAC
tristate "CMAC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
Cipher-based Message Authentication Code (CMAC) specified by
The National Institute of Standards and Technology (NIST).
https://tools.ietf.org/html/rfc4493
http://csrc.nist.gov/publications/nistpubs/800-38B/SP_800-38B.pdf
config CRYPTO_HMAC
tristate "HMAC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
HMAC: Keyed-Hashing for Message Authentication (RFC2104).
This is required for IPSec.
config CRYPTO_XCBC
tristate "XCBC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
XCBC: Keyed-Hashing with encryption algorithm
http://www.ietf.org/rfc/rfc3566.txt
http://csrc.nist.gov/encryption/modes/proposedmodes/
xcbc-mac/xcbc-mac-spec.pdf
config CRYPTO_VMAC
tristate "VMAC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
VMAC is a message authentication algorithm designed for
very high speed on 64-bit architectures.
See also:
<http://fastcrypto.org/vmac>
comment "Digest"
config CRYPTO_CRC32C
tristate "CRC32c CRC algorithm"
select CRYPTO_HASH
select CRC32
help
Castagnoli, et al Cyclic Redundancy-Check Algorithm. Used
by iSCSI for header and data digests and by others.
See Castagnoli93. Module will be crc32c.
config CRYPTO_CRC32C_INTEL
tristate "CRC32c INTEL hardware acceleration"
depends on X86
select CRYPTO_HASH
help
In Intel processor with SSE4.2 supported, the processor will
support CRC32C implementation using hardware accelerated CRC32
instruction. This option will create 'crc32c-intel' module,
which will enable any routine to use the CRC32 instruction to
gain performance compared with software implementation.
Module will be crc32c-intel.
config CRYPTO_CRC32C_VPMSUM
tristate "CRC32c CRC algorithm (powerpc64)"
depends on PPC64 && ALTIVEC
select CRYPTO_HASH
select CRC32
help
CRC32c algorithm implemented using vector polynomial multiply-sum
(vpmsum) instructions, introduced in POWER8. Enable on POWER8
and newer processors for improved performance.
config CRYPTO_CRC32C_SPARC64
tristate "CRC32c CRC algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_HASH
select CRC32
help
CRC32c CRC algorithm implemented using sparc64 crypto instructions,
when available.
config CRYPTO_CRC32
tristate "CRC32 CRC algorithm"
select CRYPTO_HASH
select CRC32
help
CRC-32-IEEE 802.3 cyclic redundancy-check algorithm.
Shash crypto api wrappers to crc32_le function.
config CRYPTO_CRC32_PCLMUL
tristate "CRC32 PCLMULQDQ hardware acceleration"
depends on X86
select CRYPTO_HASH
select CRC32
help
From Intel Westmere and AMD Bulldozer processor with SSE4.2
and PCLMULQDQ supported, the processor will support
CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ
instruction. This option will create 'crc32-plcmul' module,
which will enable any routine to use the CRC-32-IEEE 802.3 checksum
and gain better performance as compared with the table implementation.
config CRYPTO_CRC32_MIPS
tristate "CRC32c and CRC32 CRC algorithm (MIPS)"
depends on MIPS_CRC_SUPPORT
select CRYPTO_HASH
help
CRC32c and CRC32 CRC algorithms implemented using mips crypto
instructions, when available.
config CRYPTO_CRCT10DIF
tristate "CRCT10DIF algorithm"
select CRYPTO_HASH
help
CRC T10 Data Integrity Field computation is being cast as
a crypto transform. This allows for faster crc t10 diff
transforms to be used if they are available.
config CRYPTO_CRCT10DIF_PCLMUL
tristate "CRCT10DIF PCLMULQDQ hardware acceleration"
depends on X86 && 64BIT && CRC_T10DIF
select CRYPTO_HASH
help
For x86_64 processors with SSE4.2 and PCLMULQDQ supported,
CRC T10 DIF PCLMULQDQ computation can be hardware
accelerated PCLMULQDQ instruction. This option will create
'crct10dif-plcmul' module, which is faster when computing the
crct10dif checksum as compared with the generic table implementation.
config CRYPTO_CRCT10DIF_VPMSUM
tristate "CRC32T10DIF powerpc64 hardware acceleration"
depends on PPC64 && ALTIVEC && CRC_T10DIF
select CRYPTO_HASH
help
CRC10T10DIF algorithm implemented using vector polynomial
multiply-sum (vpmsum) instructions, introduced in POWER8. Enable on
POWER8 and newer processors for improved performance.
config CRYPTO_VPMSUM_TESTER
tristate "Powerpc64 vpmsum hardware acceleration tester"
depends on CRYPTO_CRCT10DIF_VPMSUM && CRYPTO_CRC32C_VPMSUM
help
Stress test for CRC32c and CRC-T10DIF algorithms implemented with
POWER8 vpmsum instructions.
Unless you are testing these algorithms, you don't need this.
config CRYPTO_GHASH
tristate "GHASH digest algorithm"
select CRYPTO_GF128MUL
select CRYPTO_HASH
help
GHASH is message digest algorithm for GCM (Galois/Counter Mode).
config CRYPTO_POLY1305
tristate "Poly1305 authenticator algorithm"
select CRYPTO_HASH
help
Poly1305 authenticator algorithm, RFC7539.
Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein.
It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
in IETF protocols. This is the portable C implementation of Poly1305.
crypto: poly1305 - Add a SSE2 SIMD variant for x86_64 Implements an x86_64 assembler driver for the Poly1305 authenticator. This single block variant holds the 130-bit integer in 5 32-bit words, but uses SSE to do two multiplications/additions in parallel. When calling updates with small blocks, the overhead for kernel_fpu_begin/ kernel_fpu_end() negates the perfmance gain. We therefore use the poly1305-generic fallback for small updates. For large messages, throughput increases by ~5-10% compared to poly1305-generic: testing speed of poly1305 (poly1305-generic) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 4080026 opers/sec, 391682496 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 6221094 opers/sec, 597225024 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9609750 opers/sec, 922536057 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1459379 opers/sec, 420301267 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2115179 opers/sec, 609171609 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3729874 opers/sec, 1074203856 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 593000 opers/sec, 626208000 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1081536 opers/sec, 1142102332 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 302077 opers/sec, 628320576 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 554384 opers/sec, 1153120176 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 278715 opers/sec, 1150536345 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 140202 opers/sec, 1153022070 bytes/sec testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3790063 opers/sec, 363846076 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5913378 opers/sec, 567684355 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9352574 opers/sec, 897847104 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1362145 opers/sec, 392297990 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2007075 opers/sec, 578037628 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3709811 opers/sec, 1068425798 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 566272 opers/sec, 597984182 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1111657 opers/sec, 1173910108 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 288857 opers/sec, 600823808 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 590746 opers/sec, 1228751888 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 301825 opers/sec, 1245936902 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 153075 opers/sec, 1258896201 bytes/sec Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-16 17:14:06 +00:00
config CRYPTO_POLY1305_X86_64
crypto: poly1305 - Add a four block AVX2 variant for x86_64 Extends the x86_64 Poly1305 authenticator by a function processing four consecutive Poly1305 blocks in parallel using AVX2 instructions. For large messages, throughput increases by ~15-45% compared to two block SSE2: testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3809514 opers/sec, 365713411 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5973423 opers/sec, 573448627 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9446779 opers/sec, 906890803 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1364814 opers/sec, 393066691 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2045780 opers/sec, 589184697 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3711946 opers/sec, 1069040592 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 573686 opers/sec, 605812732 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1647802 opers/sec, 1740079440 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 292970 opers/sec, 609378224 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 943229 opers/sec, 1961916528 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 494623 opers/sec, 2041804569 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 254045 opers/sec, 2089271014 bytes/sec testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3826224 opers/sec, 367317552 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5948638 opers/sec, 571069267 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9439110 opers/sec, 906154627 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1367756 opers/sec, 393913872 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2056881 opers/sec, 592381958 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3711153 opers/sec, 1068812179 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 574940 opers/sec, 607136745 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1948830 opers/sec, 2057964585 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 293308 opers/sec, 610082096 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 1235224 opers/sec, 2569267792 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 684405 opers/sec, 2825226316 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 367101 opers/sec, 3019039446 bytes/sec Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-16 17:14:08 +00:00
tristate "Poly1305 authenticator algorithm (x86_64/SSE2/AVX2)"
crypto: poly1305 - Add a SSE2 SIMD variant for x86_64 Implements an x86_64 assembler driver for the Poly1305 authenticator. This single block variant holds the 130-bit integer in 5 32-bit words, but uses SSE to do two multiplications/additions in parallel. When calling updates with small blocks, the overhead for kernel_fpu_begin/ kernel_fpu_end() negates the perfmance gain. We therefore use the poly1305-generic fallback for small updates. For large messages, throughput increases by ~5-10% compared to poly1305-generic: testing speed of poly1305 (poly1305-generic) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 4080026 opers/sec, 391682496 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 6221094 opers/sec, 597225024 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9609750 opers/sec, 922536057 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1459379 opers/sec, 420301267 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2115179 opers/sec, 609171609 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3729874 opers/sec, 1074203856 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 593000 opers/sec, 626208000 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1081536 opers/sec, 1142102332 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 302077 opers/sec, 628320576 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 554384 opers/sec, 1153120176 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 278715 opers/sec, 1150536345 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 140202 opers/sec, 1153022070 bytes/sec testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3790063 opers/sec, 363846076 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5913378 opers/sec, 567684355 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9352574 opers/sec, 897847104 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1362145 opers/sec, 392297990 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2007075 opers/sec, 578037628 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3709811 opers/sec, 1068425798 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 566272 opers/sec, 597984182 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1111657 opers/sec, 1173910108 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 288857 opers/sec, 600823808 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 590746 opers/sec, 1228751888 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 301825 opers/sec, 1245936902 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 153075 opers/sec, 1258896201 bytes/sec Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-16 17:14:06 +00:00
depends on X86 && 64BIT
select CRYPTO_POLY1305
help
Poly1305 authenticator algorithm, RFC7539.
Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein.
It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
in IETF protocols. This is the x86_64 assembler implementation using SIMD
instructions.
config CRYPTO_MD4
tristate "MD4 digest algorithm"
select CRYPTO_HASH
help
MD4 message digest algorithm (RFC1320).
config CRYPTO_MD5
tristate "MD5 digest algorithm"
select CRYPTO_HASH
help
MD5 message digest algorithm (RFC1321).
config CRYPTO_MD5_OCTEON
tristate "MD5 digest algorithm (OCTEON)"
depends on CPU_CAVIUM_OCTEON
select CRYPTO_MD5
select CRYPTO_HASH
help
MD5 message digest algorithm (RFC1321) implemented
using OCTEON crypto instructions, when available.
config CRYPTO_MD5_PPC
tristate "MD5 digest algorithm (PPC)"
depends on PPC
select CRYPTO_HASH
help
MD5 message digest algorithm (RFC1321) implemented
in PPC assembler.
config CRYPTO_MD5_SPARC64
tristate "MD5 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_MD5
select CRYPTO_HASH
help
MD5 message digest algorithm (RFC1321) implemented
using sparc64 crypto instructions, when available.
config CRYPTO_MICHAEL_MIC
tristate "Michael MIC keyed digest algorithm"
select CRYPTO_HASH
help
Michael MIC is used for message integrity protection in TKIP
(IEEE 802.11i). This algorithm is required for TKIP, but it
should not be used for other purposes because of the weakness
of the algorithm.
config CRYPTO_RMD128
tristate "RIPEMD-128 digest algorithm"
select CRYPTO_HASH
help
RIPEMD-128 (ISO/IEC 10118-3:2004).
RIPEMD-128 is a 128-bit cryptographic hash function. It should only
be used as a secure replacement for RIPEMD. For other use cases,
RIPEMD-160 should be used.
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_RMD160
tristate "RIPEMD-160 digest algorithm"
select CRYPTO_HASH
help
RIPEMD-160 (ISO/IEC 10118-3:2004).
RIPEMD-160 is a 160-bit cryptographic hash function. It is intended
to be used as a secure replacement for the 128-bit hash functions
MD4, MD5 and it's predecessor RIPEMD
(not to be confused with RIPEMD-128).
It's speed is comparable to SHA1 and there are no known attacks
against RIPEMD-160.
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_RMD256
tristate "RIPEMD-256 digest algorithm"
select CRYPTO_HASH
help
RIPEMD-256 is an optional extension of RIPEMD-128 with a
256 bit hash. It is intended for applications that require
longer hash-results, without needing a larger security level
(than RIPEMD-128).
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_RMD320
tristate "RIPEMD-320 digest algorithm"
select CRYPTO_HASH
help
RIPEMD-320 is an optional extension of RIPEMD-160 with a
320 bit hash. It is intended for applications that require
longer hash-results, without needing a larger security level
(than RIPEMD-160).
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_SHA1
tristate "SHA1 digest algorithm"
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
crypto: sha1 - SSSE3 based SHA1 implementation for x86-64 This is an assembler implementation of the SHA1 algorithm using the Supplemental SSE3 (SSSE3) instructions or, when available, the Advanced Vector Extensions (AVX). Testing with the tcrypt module shows the raw hash performance is up to 2.3 times faster than the C implementation, using 8k data blocks on a Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25% faster. Since this implementation uses SSE/YMM registers it cannot safely be used in every situation, e.g. while an IRQ interrupts a kernel thread. The implementation falls back to the generic SHA1 variant, if using the SSE/YMM registers is not possible. With this algorithm I was able to increase the throughput of a single IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using the SSSE3 variant -- a speedup of +34.8%. Saving and restoring SSE/YMM state might make the actual throughput fluctuate when there are FPU intensive userland applications running. For example, meassuring the performance using iperf2 directly on the machine under test gives wobbling numbers because iperf2 uses the FPU for each packet to check if the reporting interval has expired (in the above test I got min/max/avg: 402/484/464 MBit/s). Using this algorithm on a IPsec gateway gives much more reasonable and stable numbers, albeit not as high as in the directly connected case. Here is the result from an RFC 2544 test run with a EXFO Packet Blazer FTB-8510: frame size sha1-generic sha1-ssse3 delta 64 byte 37.5 MBit/s 37.5 MBit/s 0.0% 128 byte 56.3 MBit/s 62.5 MBit/s +11.0% 256 byte 87.5 MBit/s 100.0 MBit/s +14.3% 512 byte 131.3 MBit/s 150.0 MBit/s +14.2% 1024 byte 162.5 MBit/s 193.8 MBit/s +19.3% 1280 byte 175.0 MBit/s 212.5 MBit/s +21.4% 1420 byte 175.0 MBit/s 218.7 MBit/s +25.0% 1518 byte 150.0 MBit/s 181.2 MBit/s +20.8% The throughput for the largest frame size is lower than for the previous size because the IP packets need to be fragmented in this case to make there way through the IPsec tunnel. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-04 18:19:25 +00:00
config CRYPTO_SHA1_SSSE3
tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2/SHA-NI)"
crypto: sha1 - SSSE3 based SHA1 implementation for x86-64 This is an assembler implementation of the SHA1 algorithm using the Supplemental SSE3 (SSSE3) instructions or, when available, the Advanced Vector Extensions (AVX). Testing with the tcrypt module shows the raw hash performance is up to 2.3 times faster than the C implementation, using 8k data blocks on a Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25% faster. Since this implementation uses SSE/YMM registers it cannot safely be used in every situation, e.g. while an IRQ interrupts a kernel thread. The implementation falls back to the generic SHA1 variant, if using the SSE/YMM registers is not possible. With this algorithm I was able to increase the throughput of a single IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using the SSSE3 variant -- a speedup of +34.8%. Saving and restoring SSE/YMM state might make the actual throughput fluctuate when there are FPU intensive userland applications running. For example, meassuring the performance using iperf2 directly on the machine under test gives wobbling numbers because iperf2 uses the FPU for each packet to check if the reporting interval has expired (in the above test I got min/max/avg: 402/484/464 MBit/s). Using this algorithm on a IPsec gateway gives much more reasonable and stable numbers, albeit not as high as in the directly connected case. Here is the result from an RFC 2544 test run with a EXFO Packet Blazer FTB-8510: frame size sha1-generic sha1-ssse3 delta 64 byte 37.5 MBit/s 37.5 MBit/s 0.0% 128 byte 56.3 MBit/s 62.5 MBit/s +11.0% 256 byte 87.5 MBit/s 100.0 MBit/s +14.3% 512 byte 131.3 MBit/s 150.0 MBit/s +14.2% 1024 byte 162.5 MBit/s 193.8 MBit/s +19.3% 1280 byte 175.0 MBit/s 212.5 MBit/s +21.4% 1420 byte 175.0 MBit/s 218.7 MBit/s +25.0% 1518 byte 150.0 MBit/s 181.2 MBit/s +20.8% The throughput for the largest frame size is lower than for the previous size because the IP packets need to be fragmented in this case to make there way through the IPsec tunnel. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-04 18:19:25 +00:00
depends on X86 && 64BIT
select CRYPTO_SHA1
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using Supplemental SSE3 (SSSE3) instructions or Advanced Vector
Extensions (AVX/AVX2) or SHA-NI(SHA Extensions New Instructions),
when available.
crypto: sha1 - SSSE3 based SHA1 implementation for x86-64 This is an assembler implementation of the SHA1 algorithm using the Supplemental SSE3 (SSSE3) instructions or, when available, the Advanced Vector Extensions (AVX). Testing with the tcrypt module shows the raw hash performance is up to 2.3 times faster than the C implementation, using 8k data blocks on a Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25% faster. Since this implementation uses SSE/YMM registers it cannot safely be used in every situation, e.g. while an IRQ interrupts a kernel thread. The implementation falls back to the generic SHA1 variant, if using the SSE/YMM registers is not possible. With this algorithm I was able to increase the throughput of a single IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using the SSSE3 variant -- a speedup of +34.8%. Saving and restoring SSE/YMM state might make the actual throughput fluctuate when there are FPU intensive userland applications running. For example, meassuring the performance using iperf2 directly on the machine under test gives wobbling numbers because iperf2 uses the FPU for each packet to check if the reporting interval has expired (in the above test I got min/max/avg: 402/484/464 MBit/s). Using this algorithm on a IPsec gateway gives much more reasonable and stable numbers, albeit not as high as in the directly connected case. Here is the result from an RFC 2544 test run with a EXFO Packet Blazer FTB-8510: frame size sha1-generic sha1-ssse3 delta 64 byte 37.5 MBit/s 37.5 MBit/s 0.0% 128 byte 56.3 MBit/s 62.5 MBit/s +11.0% 256 byte 87.5 MBit/s 100.0 MBit/s +14.3% 512 byte 131.3 MBit/s 150.0 MBit/s +14.2% 1024 byte 162.5 MBit/s 193.8 MBit/s +19.3% 1280 byte 175.0 MBit/s 212.5 MBit/s +21.4% 1420 byte 175.0 MBit/s 218.7 MBit/s +25.0% 1518 byte 150.0 MBit/s 181.2 MBit/s +20.8% The throughput for the largest frame size is lower than for the previous size because the IP packets need to be fragmented in this case to make there way through the IPsec tunnel. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-04 18:19:25 +00:00
config CRYPTO_SHA256_SSSE3
tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2/SHA-NI)"
depends on X86 && 64BIT
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA-256 secure hash standard (DFIPS 180-2) implemented
using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
Extensions version 1 (AVX1), or Advanced Vector Extensions
version 2 (AVX2) instructions, or SHA-NI (SHA Extensions New
Instructions) when available.
config CRYPTO_SHA512_SSSE3
tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)"
depends on X86 && 64BIT
select CRYPTO_SHA512
select CRYPTO_HASH
help
SHA-512 secure hash standard (DFIPS 180-2) implemented
using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
Extensions version 1 (AVX1), or Advanced Vector Extensions
version 2 (AVX2) instructions, when available.
config CRYPTO_SHA1_OCTEON
tristate "SHA1 digest algorithm (OCTEON)"
depends on CPU_CAVIUM_OCTEON
select CRYPTO_SHA1
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using OCTEON crypto instructions, when available.
config CRYPTO_SHA1_SPARC64
tristate "SHA1 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_SHA1
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
config CRYPTO_SHA1_PPC
tristate "SHA1 digest algorithm (powerpc)"
depends on PPC
help
This is the powerpc hardware accelerated implementation of the
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
config CRYPTO_SHA1_PPC_SPE
tristate "SHA1 digest algorithm (PPC SPE)"
depends on PPC && SPE
help
SHA-1 secure hash standard (DFIPS 180-4) implemented
using powerpc SPE SIMD instruction set.
config CRYPTO_SHA1_MB
tristate "SHA1 digest algorithm (x86_64 Multi-Buffer, Experimental)"
depends on X86 && 64BIT
select CRYPTO_SHA1
select CRYPTO_HASH
select CRYPTO_MCRYPTD
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using multi-buffer technique. This algorithm computes on
multiple data lanes concurrently with SIMD instructions for
better throughput. It should not be enabled by default but
used when there is significant amount of work to keep the keep
the data lanes filled to get performance benefit. If the data
lanes remain unfilled, a flush operation will be initiated to
process the crypto jobs, adding a slight latency.
config CRYPTO_SHA256_MB
tristate "SHA256 digest algorithm (x86_64 Multi-Buffer, Experimental)"
depends on X86 && 64BIT
select CRYPTO_SHA256
select CRYPTO_HASH
select CRYPTO_MCRYPTD
help
SHA-256 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using multi-buffer technique. This algorithm computes on
multiple data lanes concurrently with SIMD instructions for
better throughput. It should not be enabled by default but
used when there is significant amount of work to keep the keep
the data lanes filled to get performance benefit. If the data
lanes remain unfilled, a flush operation will be initiated to
process the crypto jobs, adding a slight latency.
config CRYPTO_SHA512_MB
tristate "SHA512 digest algorithm (x86_64 Multi-Buffer, Experimental)"
depends on X86 && 64BIT
select CRYPTO_SHA512
select CRYPTO_HASH
select CRYPTO_MCRYPTD
help
SHA-512 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using multi-buffer technique. This algorithm computes on
multiple data lanes concurrently with SIMD instructions for
better throughput. It should not be enabled by default but
used when there is significant amount of work to keep the keep
the data lanes filled to get performance benefit. If the data
lanes remain unfilled, a flush operation will be initiated to
process the crypto jobs, adding a slight latency.
config CRYPTO_SHA256
tristate "SHA224 and SHA256 digest algorithm"
select CRYPTO_HASH
help
SHA256 secure hash standard (DFIPS 180-2).
This version of SHA implements a 256 bit hash with 128 bits of
security against collision attacks.
This code also includes SHA-224, a 224 bit hash with 112 bits
of security against collision attacks.
config CRYPTO_SHA256_PPC_SPE
tristate "SHA224 and SHA256 digest algorithm (PPC SPE)"
depends on PPC && SPE
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA224 and SHA256 secure hash standard (DFIPS 180-2)
implemented using powerpc SPE SIMD instruction set.
config CRYPTO_SHA256_OCTEON
tristate "SHA224 and SHA256 digest algorithm (OCTEON)"
depends on CPU_CAVIUM_OCTEON
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA-256 secure hash standard (DFIPS 180-2) implemented
using OCTEON crypto instructions, when available.
config CRYPTO_SHA256_SPARC64
tristate "SHA224 and SHA256 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA-256 secure hash standard (DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
config CRYPTO_SHA512
tristate "SHA384 and SHA512 digest algorithms"
select CRYPTO_HASH
help
SHA512 secure hash standard (DFIPS 180-2).
This version of SHA implements a 512 bit hash with 256 bits of
security against collision attacks.
This code also includes SHA-384, a 384 bit hash with 192 bits
of security against collision attacks.
config CRYPTO_SHA512_OCTEON
tristate "SHA384 and SHA512 digest algorithms (OCTEON)"
depends on CPU_CAVIUM_OCTEON
select CRYPTO_SHA512
select CRYPTO_HASH
help
SHA-512 secure hash standard (DFIPS 180-2) implemented
using OCTEON crypto instructions, when available.
config CRYPTO_SHA512_SPARC64
tristate "SHA384 and SHA512 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_SHA512
select CRYPTO_HASH
help
SHA-512 secure hash standard (DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
config CRYPTO_SHA3
tristate "SHA3 digest algorithm"
select CRYPTO_HASH
help
SHA-3 secure hash standard (DFIPS 202). It's based on
cryptographic sponge function family called Keccak.
References:
http://keccak.noekeon.org/
config CRYPTO_SM3
tristate "SM3 digest algorithm"
select CRYPTO_HASH
help
SM3 secure hash function as defined by OSCCA GM/T 0004-2012 SM3).
It is part of the Chinese Commercial Cryptography suite.
References:
http://www.oscca.gov.cn/UpFile/20101222141857786.pdf
https://datatracker.ietf.org/doc/html/draft-shen-sm3-hash
config CRYPTO_TGR192
tristate "Tiger digest algorithms"
select CRYPTO_HASH
help
Tiger hash algorithm 192, 160 and 128-bit hashes
Tiger is a hash function optimized for 64-bit processors while
still having decent performance on 32-bit processors.
Tiger was developed by Ross Anderson and Eli Biham.
See also:
<http://www.cs.technion.ac.il/~biham/Reports/Tiger/>.
config CRYPTO_WP512
tristate "Whirlpool digest algorithms"
select CRYPTO_HASH
help
Whirlpool hash algorithm 512, 384 and 256-bit hashes
Whirlpool-512 is part of the NESSIE cryptographic primitives.
Whirlpool will be part of the ISO/IEC 10118-3:2003(E) standard
See also:
<http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html>
config CRYPTO_GHASH_CLMUL_NI_INTEL
tristate "GHASH digest algorithm (CLMUL-NI accelerated)"
depends on X86 && 64BIT
select CRYPTO_CRYPTD
help
GHASH is message digest algorithm for GCM (Galois/Counter Mode).
The implementation is accelerated by CLMUL-NI of Intel.
comment "Ciphers"
config CRYPTO_AES
tristate "AES cipher algorithms"
select CRYPTO_ALGAPI
help
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/CryptoToolkit/aes/> for more information.
config CRYPTO_AES_TI
tristate "Fixed time AES cipher"
select CRYPTO_ALGAPI
help
This is a generic implementation of AES that attempts to eliminate
data dependent latencies as much as possible without affecting
performance too much. It is intended for use by the generic CCM
and GCM drivers, and other CTR or CMAC/XCBC based modes that rely
solely on encryption (although decryption is supported as well, but
with a more dramatic performance hit)
Instead of using 16 lookup tables of 1 KB each, (8 for encryption and
8 for decryption), this implementation only uses just two S-boxes of
256 bytes each, and attempts to eliminate data dependent latencies by
prefetching the entire table into the cache at the start of each
block.
config CRYPTO_AES_586
tristate "AES cipher algorithms (i586)"
depends on (X86 || UML_X86) && !64BIT
select CRYPTO_ALGAPI
select CRYPTO_AES
help
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
[CRYPTO] Add x86_64 asm AES Implementation: =============== The encrypt/decrypt code is based on an x86 implementation I did a while ago which I never published. This unpublished implementation does include an assembler based key schedule and precomputed tables. For simplicity and best acceptance, however, I took Gladman's in-kernel code for table generation and key schedule for the kernel port of my assembler code and modified this code to produce the key schedule as required by my assembler implementation. File locations and Kconfig are kept similar to the i586 AES assembler implementation. It may seem a little bit strange to use 32 bit I/O and registers in the assembler implementation but this gives the best code size. My implementation takes one instruction more per round compared to Gladman's x86 assembler but it doesn't require any stack for local variables or saved registers and it is less serialized than Gladman's code. Note that all comparisons to Gladman's code were done after my code was implemented. I did only use FIPS PUB 197 for the implementation so my implementation is independent work. If anybody has a better assembler solution for x86_64 I'll be pleased to have my code replaced with the better solution. Testing: ======== The implementation passes the in-kernel crypto testing module and I'm running it without any problems on my laptop where it is mainly used for dm-crypt. Microbenchmark: =============== The microbenchmark was done in userspace with similar compile flags as used during kernel compile. Encrypt/decrypt is about 35% faster than the generic C implementation. As the generic C as well as my assembler implementation are both table I don't really expect that there is much room for further improvements though I'll be glad to be corrected here. The key schedule is about 5% slower than the generic C implementation. This is due to the fact that some more work has to be done in the key schedule routine to fit the schedule to the assembler implementation. Code Size: ========== Encrypt and decrypt are together about 2.1 Kbytes smaller than the generic C implementation which is important with regard to L1 cache usage. The key schedule routine is about 100 bytes larger than the generic C implementation. Data Size: ========== There's no difference in data size requirements between the assembler implementation and the generic C implementation. License: ======== Gladmans's code is dual BSD/GPL whereas my assembler code is GPLv2 only (I'm not going to change the license for my code). So I had to change the module license for the x86_64 aes module from 'Dual BSD/GPL' to 'GPL' to reflect the most restrictive license within the module. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 20:55:00 +00:00
See <http://csrc.nist.gov/encryption/aes/> for more information.
config CRYPTO_AES_X86_64
tristate "AES cipher algorithms (x86_64)"
depends on (X86 || UML_X86) && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_AES
[CRYPTO] Add x86_64 asm AES Implementation: =============== The encrypt/decrypt code is based on an x86 implementation I did a while ago which I never published. This unpublished implementation does include an assembler based key schedule and precomputed tables. For simplicity and best acceptance, however, I took Gladman's in-kernel code for table generation and key schedule for the kernel port of my assembler code and modified this code to produce the key schedule as required by my assembler implementation. File locations and Kconfig are kept similar to the i586 AES assembler implementation. It may seem a little bit strange to use 32 bit I/O and registers in the assembler implementation but this gives the best code size. My implementation takes one instruction more per round compared to Gladman's x86 assembler but it doesn't require any stack for local variables or saved registers and it is less serialized than Gladman's code. Note that all comparisons to Gladman's code were done after my code was implemented. I did only use FIPS PUB 197 for the implementation so my implementation is independent work. If anybody has a better assembler solution for x86_64 I'll be pleased to have my code replaced with the better solution. Testing: ======== The implementation passes the in-kernel crypto testing module and I'm running it without any problems on my laptop where it is mainly used for dm-crypt. Microbenchmark: =============== The microbenchmark was done in userspace with similar compile flags as used during kernel compile. Encrypt/decrypt is about 35% faster than the generic C implementation. As the generic C as well as my assembler implementation are both table I don't really expect that there is much room for further improvements though I'll be glad to be corrected here. The key schedule is about 5% slower than the generic C implementation. This is due to the fact that some more work has to be done in the key schedule routine to fit the schedule to the assembler implementation. Code Size: ========== Encrypt and decrypt are together about 2.1 Kbytes smaller than the generic C implementation which is important with regard to L1 cache usage. The key schedule routine is about 100 bytes larger than the generic C implementation. Data Size: ========== There's no difference in data size requirements between the assembler implementation and the generic C implementation. License: ======== Gladmans's code is dual BSD/GPL whereas my assembler code is GPLv2 only (I'm not going to change the license for my code). So I had to change the module license for the x86_64 aes module from 'Dual BSD/GPL' to 'GPL' to reflect the most restrictive license within the module. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 20:55:00 +00:00
help
AES cipher algorithms (FIPS-197). AES uses the Rijndael
[CRYPTO] Add x86_64 asm AES Implementation: =============== The encrypt/decrypt code is based on an x86 implementation I did a while ago which I never published. This unpublished implementation does include an assembler based key schedule and precomputed tables. For simplicity and best acceptance, however, I took Gladman's in-kernel code for table generation and key schedule for the kernel port of my assembler code and modified this code to produce the key schedule as required by my assembler implementation. File locations and Kconfig are kept similar to the i586 AES assembler implementation. It may seem a little bit strange to use 32 bit I/O and registers in the assembler implementation but this gives the best code size. My implementation takes one instruction more per round compared to Gladman's x86 assembler but it doesn't require any stack for local variables or saved registers and it is less serialized than Gladman's code. Note that all comparisons to Gladman's code were done after my code was implemented. I did only use FIPS PUB 197 for the implementation so my implementation is independent work. If anybody has a better assembler solution for x86_64 I'll be pleased to have my code replaced with the better solution. Testing: ======== The implementation passes the in-kernel crypto testing module and I'm running it without any problems on my laptop where it is mainly used for dm-crypt. Microbenchmark: =============== The microbenchmark was done in userspace with similar compile flags as used during kernel compile. Encrypt/decrypt is about 35% faster than the generic C implementation. As the generic C as well as my assembler implementation are both table I don't really expect that there is much room for further improvements though I'll be glad to be corrected here. The key schedule is about 5% slower than the generic C implementation. This is due to the fact that some more work has to be done in the key schedule routine to fit the schedule to the assembler implementation. Code Size: ========== Encrypt and decrypt are together about 2.1 Kbytes smaller than the generic C implementation which is important with regard to L1 cache usage. The key schedule routine is about 100 bytes larger than the generic C implementation. Data Size: ========== There's no difference in data size requirements between the assembler implementation and the generic C implementation. License: ======== Gladmans's code is dual BSD/GPL whereas my assembler code is GPLv2 only (I'm not going to change the license for my code). So I had to change the module license for the x86_64 aes module from 'Dual BSD/GPL' to 'GPL' to reflect the most restrictive license within the module. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 20:55:00 +00:00
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/encryption/aes/> for more information.
config CRYPTO_AES_NI_INTEL
tristate "AES cipher algorithms (AES-NI)"
depends on X86
select CRYPTO_AEAD
select CRYPTO_AES_X86_64 if 64BIT
select CRYPTO_AES_586 if !64BIT
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
select CRYPTO_GLUE_HELPER_X86 if 64BIT
select CRYPTO_SIMD
help
Use Intel AES-NI instructions for AES algorithm.
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
[CRYPTO] Add x86_64 asm AES Implementation: =============== The encrypt/decrypt code is based on an x86 implementation I did a while ago which I never published. This unpublished implementation does include an assembler based key schedule and precomputed tables. For simplicity and best acceptance, however, I took Gladman's in-kernel code for table generation and key schedule for the kernel port of my assembler code and modified this code to produce the key schedule as required by my assembler implementation. File locations and Kconfig are kept similar to the i586 AES assembler implementation. It may seem a little bit strange to use 32 bit I/O and registers in the assembler implementation but this gives the best code size. My implementation takes one instruction more per round compared to Gladman's x86 assembler but it doesn't require any stack for local variables or saved registers and it is less serialized than Gladman's code. Note that all comparisons to Gladman's code were done after my code was implemented. I did only use FIPS PUB 197 for the implementation so my implementation is independent work. If anybody has a better assembler solution for x86_64 I'll be pleased to have my code replaced with the better solution. Testing: ======== The implementation passes the in-kernel crypto testing module and I'm running it without any problems on my laptop where it is mainly used for dm-crypt. Microbenchmark: =============== The microbenchmark was done in userspace with similar compile flags as used during kernel compile. Encrypt/decrypt is about 35% faster than the generic C implementation. As the generic C as well as my assembler implementation are both table I don't really expect that there is much room for further improvements though I'll be glad to be corrected here. The key schedule is about 5% slower than the generic C implementation. This is due to the fact that some more work has to be done in the key schedule routine to fit the schedule to the assembler implementation. Code Size: ========== Encrypt and decrypt are together about 2.1 Kbytes smaller than the generic C implementation which is important with regard to L1 cache usage. The key schedule routine is about 100 bytes larger than the generic C implementation. Data Size: ========== There's no difference in data size requirements between the assembler implementation and the generic C implementation. License: ======== Gladmans's code is dual BSD/GPL whereas my assembler code is GPLv2 only (I'm not going to change the license for my code). So I had to change the module license for the x86_64 aes module from 'Dual BSD/GPL' to 'GPL' to reflect the most restrictive license within the module. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 20:55:00 +00:00
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/encryption/aes/> for more information.
In addition to AES cipher algorithm support, the acceleration
for some popular block cipher mode is supported too, including
ECB, CBC, LRW, PCBC, XTS. The 64 bit version has additional
acceleration for CTR.
config CRYPTO_AES_SPARC64
tristate "AES cipher algorithms (SPARC64)"
depends on SPARC64
select CRYPTO_CRYPTD
select CRYPTO_ALGAPI
help
Use SPARC64 crypto opcodes for AES algorithm.
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/encryption/aes/> for more information.
In addition to AES cipher algorithm support, the acceleration
for some popular block cipher mode is supported too, including
ECB and CBC.
config CRYPTO_AES_PPC_SPE
tristate "AES cipher algorithms (PPC SPE)"
depends on PPC && SPE
help
AES cipher algorithms (FIPS-197). Additionally the acceleration
for popular block cipher modes ECB, CBC, CTR and XTS is supported.
This module should only be used for low power (router) devices
without hardware AES acceleration (e.g. caam crypto). It reduces the
size of the AES tables from 16KB to 8KB + 256 bytes and mitigates
timining attacks. Nevertheless it might be not as secure as other
architecture specific assembler implementations that work on 1KB
tables or 256 bytes S-boxes.
config CRYPTO_ANUBIS
tristate "Anubis cipher algorithm"
select CRYPTO_ALGAPI
help
Anubis cipher algorithm.
Anubis is a variable key length cipher which can use keys from
128 bits to 320 bits in length. It was evaluated as a entrant
in the NESSIE competition.
See also:
<https://www.cosic.esat.kuleuven.be/nessie/reports/>
<http://www.larc.usp.br/~pbarreto/AnubisPage.html>
config CRYPTO_ARC4
tristate "ARC4 cipher algorithm"
select CRYPTO_BLKCIPHER
help
ARC4 cipher algorithm.
ARC4 is a stream cipher using keys ranging from 8 bits to 2048
bits in length. This algorithm is required for driver-based
WEP, but it should not be for other purposes because of the
weakness of the algorithm.
config CRYPTO_BLOWFISH
tristate "Blowfish cipher algorithm"
select CRYPTO_ALGAPI
select CRYPTO_BLOWFISH_COMMON
help
Blowfish cipher algorithm, by Bruce Schneier.
This is a variable key length cipher which can use keys from 32
bits to 448 bits in length. It's fast, simple and specifically
designed for use on "large microprocessors".
See also:
<http://www.schneier.com/blowfish.html>
config CRYPTO_BLOWFISH_COMMON
tristate
help
Common parts of the Blowfish cipher algorithm shared by the
generic c and the assembler implementations.
See also:
<http://www.schneier.com/blowfish.html>
config CRYPTO_BLOWFISH_X86_64
tristate "Blowfish cipher algorithm (x86_64)"
depends on X86 && 64BIT
select CRYPTO_BLKCIPHER
select CRYPTO_BLOWFISH_COMMON
help
Blowfish cipher algorithm (x86_64), by Bruce Schneier.
This is a variable key length cipher which can use keys from 32
bits to 448 bits in length. It's fast, simple and specifically
designed for use on "large microprocessors".
See also:
<http://www.schneier.com/blowfish.html>
config CRYPTO_CAMELLIA
tristate "Camellia cipher algorithms"
depends on CRYPTO
select CRYPTO_ALGAPI
help
Camellia cipher algorithms module.
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
crypto: camellia - add assembler implementation for x86_64 Patch adds x86_64 assembler implementation of Camellia block cipher. Two set of functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'two-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 2-way functions should be equal to 1-way functions with in-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: AMD Phenom II 1055T (fam:16, model:10): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.27x 1.22x 1.30x 1.42x 1.30x 1.34x 1.19x 1.05x 1.23x 1.24x 64B 1.74x 1.79x 1.43x 1.87x 1.81x 1.87x 1.48x 1.38x 1.55x 1.62x 256B 1.90x 1.87x 1.43x 1.94x 1.94x 1.95x 1.63x 1.62x 1.67x 1.70x 1024B 1.96x 1.93x 1.43x 1.95x 1.98x 2.01x 1.67x 1.69x 1.74x 1.80x 8192B 1.96x 1.96x 1.39x 1.93x 2.01x 2.03x 1.72x 1.64x 1.71x 1.76x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.23x 1.23x 1.33x 1.39x 1.34x 1.38x 1.04x 1.18x 1.21x 1.29x 64B 1.72x 1.69x 1.42x 1.78x 1.81x 1.89x 1.57x 1.52x 1.56x 1.65x 256B 1.85x 1.88x 1.42x 1.86x 1.93x 1.96x 1.69x 1.65x 1.70x 1.75x 1024B 1.88x 1.86x 1.45x 1.95x 1.96x 1.95x 1.77x 1.71x 1.77x 1.78x 8192B 1.91x 1.86x 1.42x 1.91x 2.03x 1.98x 1.73x 1.71x 1.78x 1.76x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.15x 1.22x ecb-dec 1.16x 1.16x cbc-enc 0.85x 0.90x cbc-dec 1.20x 1.23x ctr-enc 1.28x 1.30x ctr-dec 1.27x 1.28x lrw-enc 1.12x 1.16x lrw-dec 1.08x 1.10x xts-enc 1.11x 1.15x xts-dec 1.14x 1.15x Intel Core2 T8100 (fam:6, model:23, step:6): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.12x 1.14x 1.16x 1.16x 1.15x 1.02x 1.02x 1.08x 1.08x 64B 1.61x 1.60x 1.17x 1.68x 1.67x 1.66x 1.43x 1.42x 1.44x 1.42x 256B 1.65x 1.73x 1.17x 1.77x 1.81x 1.80x 1.54x 1.53x 1.58x 1.54x 1024B 1.76x 1.74x 1.18x 1.80x 1.85x 1.85x 1.60x 1.59x 1.65x 1.60x 8192B 1.77x 1.75x 1.19x 1.81x 1.85x 1.86x 1.63x 1.61x 1.66x 1.62x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.07x 1.13x 1.16x 1.11x 1.16x 1.03x 1.02x 1.08x 1.07x 64B 1.61x 1.62x 1.15x 1.66x 1.63x 1.68x 1.47x 1.46x 1.47x 1.44x 256B 1.71x 1.70x 1.16x 1.75x 1.69x 1.79x 1.58x 1.57x 1.59x 1.55x 1024B 1.78x 1.72x 1.17x 1.75x 1.80x 1.80x 1.63x 1.62x 1.65x 1.62x 8192B 1.76x 1.73x 1.17x 1.78x 1.80x 1.81x 1.64x 1.62x 1.68x 1.64x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.17x 1.21x ecb-dec 1.17x 1.20x cbc-enc 0.80x 0.82x cbc-dec 1.22x 1.24x ctr-enc 1.25x 1.26x ctr-dec 1.25x 1.26x lrw-enc 1.14x 1.18x lrw-dec 1.13x 1.17x xts-enc 1.14x 1.18x xts-dec 1.14x 1.17x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-05 18:26:47 +00:00
config CRYPTO_CAMELLIA_X86_64
tristate "Camellia cipher algorithm (x86_64)"
depends on X86 && 64BIT
crypto: camellia - add assembler implementation for x86_64 Patch adds x86_64 assembler implementation of Camellia block cipher. Two set of functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'two-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 2-way functions should be equal to 1-way functions with in-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: AMD Phenom II 1055T (fam:16, model:10): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.27x 1.22x 1.30x 1.42x 1.30x 1.34x 1.19x 1.05x 1.23x 1.24x 64B 1.74x 1.79x 1.43x 1.87x 1.81x 1.87x 1.48x 1.38x 1.55x 1.62x 256B 1.90x 1.87x 1.43x 1.94x 1.94x 1.95x 1.63x 1.62x 1.67x 1.70x 1024B 1.96x 1.93x 1.43x 1.95x 1.98x 2.01x 1.67x 1.69x 1.74x 1.80x 8192B 1.96x 1.96x 1.39x 1.93x 2.01x 2.03x 1.72x 1.64x 1.71x 1.76x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.23x 1.23x 1.33x 1.39x 1.34x 1.38x 1.04x 1.18x 1.21x 1.29x 64B 1.72x 1.69x 1.42x 1.78x 1.81x 1.89x 1.57x 1.52x 1.56x 1.65x 256B 1.85x 1.88x 1.42x 1.86x 1.93x 1.96x 1.69x 1.65x 1.70x 1.75x 1024B 1.88x 1.86x 1.45x 1.95x 1.96x 1.95x 1.77x 1.71x 1.77x 1.78x 8192B 1.91x 1.86x 1.42x 1.91x 2.03x 1.98x 1.73x 1.71x 1.78x 1.76x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.15x 1.22x ecb-dec 1.16x 1.16x cbc-enc 0.85x 0.90x cbc-dec 1.20x 1.23x ctr-enc 1.28x 1.30x ctr-dec 1.27x 1.28x lrw-enc 1.12x 1.16x lrw-dec 1.08x 1.10x xts-enc 1.11x 1.15x xts-dec 1.14x 1.15x Intel Core2 T8100 (fam:6, model:23, step:6): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.12x 1.14x 1.16x 1.16x 1.15x 1.02x 1.02x 1.08x 1.08x 64B 1.61x 1.60x 1.17x 1.68x 1.67x 1.66x 1.43x 1.42x 1.44x 1.42x 256B 1.65x 1.73x 1.17x 1.77x 1.81x 1.80x 1.54x 1.53x 1.58x 1.54x 1024B 1.76x 1.74x 1.18x 1.80x 1.85x 1.85x 1.60x 1.59x 1.65x 1.60x 8192B 1.77x 1.75x 1.19x 1.81x 1.85x 1.86x 1.63x 1.61x 1.66x 1.62x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.07x 1.13x 1.16x 1.11x 1.16x 1.03x 1.02x 1.08x 1.07x 64B 1.61x 1.62x 1.15x 1.66x 1.63x 1.68x 1.47x 1.46x 1.47x 1.44x 256B 1.71x 1.70x 1.16x 1.75x 1.69x 1.79x 1.58x 1.57x 1.59x 1.55x 1024B 1.78x 1.72x 1.17x 1.75x 1.80x 1.80x 1.63x 1.62x 1.65x 1.62x 8192B 1.76x 1.73x 1.17x 1.78x 1.80x 1.81x 1.64x 1.62x 1.68x 1.64x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.17x 1.21x ecb-dec 1.17x 1.20x cbc-enc 0.80x 0.82x cbc-dec 1.22x 1.24x ctr-enc 1.25x 1.26x ctr-dec 1.25x 1.26x lrw-enc 1.14x 1.18x lrw-dec 1.13x 1.17x xts-enc 1.14x 1.18x xts-dec 1.14x 1.17x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-05 18:26:47 +00:00
depends on CRYPTO
select CRYPTO_BLKCIPHER
select CRYPTO_GLUE_HELPER_X86
crypto: camellia - add assembler implementation for x86_64 Patch adds x86_64 assembler implementation of Camellia block cipher. Two set of functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'two-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 2-way functions should be equal to 1-way functions with in-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: AMD Phenom II 1055T (fam:16, model:10): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.27x 1.22x 1.30x 1.42x 1.30x 1.34x 1.19x 1.05x 1.23x 1.24x 64B 1.74x 1.79x 1.43x 1.87x 1.81x 1.87x 1.48x 1.38x 1.55x 1.62x 256B 1.90x 1.87x 1.43x 1.94x 1.94x 1.95x 1.63x 1.62x 1.67x 1.70x 1024B 1.96x 1.93x 1.43x 1.95x 1.98x 2.01x 1.67x 1.69x 1.74x 1.80x 8192B 1.96x 1.96x 1.39x 1.93x 2.01x 2.03x 1.72x 1.64x 1.71x 1.76x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.23x 1.23x 1.33x 1.39x 1.34x 1.38x 1.04x 1.18x 1.21x 1.29x 64B 1.72x 1.69x 1.42x 1.78x 1.81x 1.89x 1.57x 1.52x 1.56x 1.65x 256B 1.85x 1.88x 1.42x 1.86x 1.93x 1.96x 1.69x 1.65x 1.70x 1.75x 1024B 1.88x 1.86x 1.45x 1.95x 1.96x 1.95x 1.77x 1.71x 1.77x 1.78x 8192B 1.91x 1.86x 1.42x 1.91x 2.03x 1.98x 1.73x 1.71x 1.78x 1.76x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.15x 1.22x ecb-dec 1.16x 1.16x cbc-enc 0.85x 0.90x cbc-dec 1.20x 1.23x ctr-enc 1.28x 1.30x ctr-dec 1.27x 1.28x lrw-enc 1.12x 1.16x lrw-dec 1.08x 1.10x xts-enc 1.11x 1.15x xts-dec 1.14x 1.15x Intel Core2 T8100 (fam:6, model:23, step:6): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.12x 1.14x 1.16x 1.16x 1.15x 1.02x 1.02x 1.08x 1.08x 64B 1.61x 1.60x 1.17x 1.68x 1.67x 1.66x 1.43x 1.42x 1.44x 1.42x 256B 1.65x 1.73x 1.17x 1.77x 1.81x 1.80x 1.54x 1.53x 1.58x 1.54x 1024B 1.76x 1.74x 1.18x 1.80x 1.85x 1.85x 1.60x 1.59x 1.65x 1.60x 8192B 1.77x 1.75x 1.19x 1.81x 1.85x 1.86x 1.63x 1.61x 1.66x 1.62x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.07x 1.13x 1.16x 1.11x 1.16x 1.03x 1.02x 1.08x 1.07x 64B 1.61x 1.62x 1.15x 1.66x 1.63x 1.68x 1.47x 1.46x 1.47x 1.44x 256B 1.71x 1.70x 1.16x 1.75x 1.69x 1.79x 1.58x 1.57x 1.59x 1.55x 1024B 1.78x 1.72x 1.17x 1.75x 1.80x 1.80x 1.63x 1.62x 1.65x 1.62x 8192B 1.76x 1.73x 1.17x 1.78x 1.80x 1.81x 1.64x 1.62x 1.68x 1.64x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.17x 1.21x ecb-dec 1.17x 1.20x cbc-enc 0.80x 0.82x cbc-dec 1.22x 1.24x ctr-enc 1.25x 1.26x ctr-dec 1.25x 1.26x lrw-enc 1.14x 1.18x lrw-dec 1.13x 1.17x xts-enc 1.14x 1.18x xts-dec 1.14x 1.17x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-05 18:26:47 +00:00
help
Camellia cipher algorithm module (x86_64).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
crypto: camellia - add AES-NI/AVX/x86_64 assembler implementation of camellia cipher This patch adds AES-NI/AVX/x86_64 assembler implementation of Camellia block cipher. Implementation process data in sixteen block chunks, which are byte-sliced and AES SubBytes is reused for Camellia s-box with help of pre- and post-filtering. Patch has been tested with tcrypt and automated filesystem tests. tcrypt test results: Intel Core i5-2450M: camellia-aesni-avx vs camellia-asm-x86_64-2way: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.98x 0.96x 0.99x 0.96x 0.96x 0.95x 0.95x 0.94x 0.97x 0.98x 64B 0.99x 0.98x 1.00x 0.98x 0.98x 0.99x 0.98x 0.93x 0.99x 0.98x 256B 2.28x 2.28x 1.01x 2.29x 2.25x 2.24x 1.96x 1.97x 1.91x 1.90x 1024B 2.57x 2.56x 1.00x 2.57x 2.51x 2.53x 2.19x 2.17x 2.19x 2.22x 8192B 2.49x 2.49x 1.00x 2.53x 2.48x 2.49x 2.17x 2.17x 2.22x 2.22x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.98x 0.99x 0.97x 0.97x 0.96x 0.97x 0.98x 0.98x 0.99x 64B 1.00x 1.00x 1.01x 0.99x 0.98x 0.99x 0.99x 0.99x 0.99x 0.99x 256B 2.37x 2.37x 1.01x 2.39x 2.35x 2.33x 2.10x 2.11x 1.99x 2.02x 1024B 2.58x 2.60x 1.00x 2.58x 2.56x 2.56x 2.28x 2.29x 2.28x 2.29x 8192B 2.50x 2.52x 1.00x 2.56x 2.51x 2.51x 2.24x 2.25x 2.26x 2.29x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-10-26 11:49:01 +00:00
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)"
depends on X86 && 64BIT
depends on CRYPTO
select CRYPTO_BLKCIPHER
crypto: camellia - add AES-NI/AVX/x86_64 assembler implementation of camellia cipher This patch adds AES-NI/AVX/x86_64 assembler implementation of Camellia block cipher. Implementation process data in sixteen block chunks, which are byte-sliced and AES SubBytes is reused for Camellia s-box with help of pre- and post-filtering. Patch has been tested with tcrypt and automated filesystem tests. tcrypt test results: Intel Core i5-2450M: camellia-aesni-avx vs camellia-asm-x86_64-2way: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.98x 0.96x 0.99x 0.96x 0.96x 0.95x 0.95x 0.94x 0.97x 0.98x 64B 0.99x 0.98x 1.00x 0.98x 0.98x 0.99x 0.98x 0.93x 0.99x 0.98x 256B 2.28x 2.28x 1.01x 2.29x 2.25x 2.24x 1.96x 1.97x 1.91x 1.90x 1024B 2.57x 2.56x 1.00x 2.57x 2.51x 2.53x 2.19x 2.17x 2.19x 2.22x 8192B 2.49x 2.49x 1.00x 2.53x 2.48x 2.49x 2.17x 2.17x 2.22x 2.22x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.98x 0.99x 0.97x 0.97x 0.96x 0.97x 0.98x 0.98x 0.99x 64B 1.00x 1.00x 1.01x 0.99x 0.98x 0.99x 0.99x 0.99x 0.99x 0.99x 256B 2.37x 2.37x 1.01x 2.39x 2.35x 2.33x 2.10x 2.11x 1.99x 2.02x 1024B 2.58x 2.60x 1.00x 2.58x 2.56x 2.56x 2.28x 2.29x 2.28x 2.29x 8192B 2.50x 2.52x 1.00x 2.56x 2.51x 2.51x 2.24x 2.25x 2.26x 2.29x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-10-26 11:49:01 +00:00
select CRYPTO_CAMELLIA_X86_64
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SIMD
crypto: camellia - add AES-NI/AVX/x86_64 assembler implementation of camellia cipher This patch adds AES-NI/AVX/x86_64 assembler implementation of Camellia block cipher. Implementation process data in sixteen block chunks, which are byte-sliced and AES SubBytes is reused for Camellia s-box with help of pre- and post-filtering. Patch has been tested with tcrypt and automated filesystem tests. tcrypt test results: Intel Core i5-2450M: camellia-aesni-avx vs camellia-asm-x86_64-2way: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.98x 0.96x 0.99x 0.96x 0.96x 0.95x 0.95x 0.94x 0.97x 0.98x 64B 0.99x 0.98x 1.00x 0.98x 0.98x 0.99x 0.98x 0.93x 0.99x 0.98x 256B 2.28x 2.28x 1.01x 2.29x 2.25x 2.24x 1.96x 1.97x 1.91x 1.90x 1024B 2.57x 2.56x 1.00x 2.57x 2.51x 2.53x 2.19x 2.17x 2.19x 2.22x 8192B 2.49x 2.49x 1.00x 2.53x 2.48x 2.49x 2.17x 2.17x 2.22x 2.22x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.98x 0.99x 0.97x 0.97x 0.96x 0.97x 0.98x 0.98x 0.99x 64B 1.00x 1.00x 1.01x 0.99x 0.98x 0.99x 0.99x 0.99x 0.99x 0.99x 256B 2.37x 2.37x 1.01x 2.39x 2.35x 2.33x 2.10x 2.11x 1.99x 2.02x 1024B 2.58x 2.60x 1.00x 2.58x 2.56x 2.56x 2.28x 2.29x 2.28x 2.29x 8192B 2.50x 2.52x 1.00x 2.56x 2.51x 2.51x 2.24x 2.25x 2.26x 2.29x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-10-26 11:49:01 +00:00
select CRYPTO_XTS
help
Camellia cipher algorithm module (x86_64/AES-NI/AVX).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
crypto: camellia - add assembler implementation for x86_64 Patch adds x86_64 assembler implementation of Camellia block cipher. Two set of functions are provided. First set is regular 'one-block at time' encrypt/decrypt functions. Second is 'two-block at time' functions that gain performance increase on out-of-order CPUs. Performance of 2-way functions should be equal to 1-way functions with in-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: AMD Phenom II 1055T (fam:16, model:10): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.27x 1.22x 1.30x 1.42x 1.30x 1.34x 1.19x 1.05x 1.23x 1.24x 64B 1.74x 1.79x 1.43x 1.87x 1.81x 1.87x 1.48x 1.38x 1.55x 1.62x 256B 1.90x 1.87x 1.43x 1.94x 1.94x 1.95x 1.63x 1.62x 1.67x 1.70x 1024B 1.96x 1.93x 1.43x 1.95x 1.98x 2.01x 1.67x 1.69x 1.74x 1.80x 8192B 1.96x 1.96x 1.39x 1.93x 2.01x 2.03x 1.72x 1.64x 1.71x 1.76x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.23x 1.23x 1.33x 1.39x 1.34x 1.38x 1.04x 1.18x 1.21x 1.29x 64B 1.72x 1.69x 1.42x 1.78x 1.81x 1.89x 1.57x 1.52x 1.56x 1.65x 256B 1.85x 1.88x 1.42x 1.86x 1.93x 1.96x 1.69x 1.65x 1.70x 1.75x 1024B 1.88x 1.86x 1.45x 1.95x 1.96x 1.95x 1.77x 1.71x 1.77x 1.78x 8192B 1.91x 1.86x 1.42x 1.91x 2.03x 1.98x 1.73x 1.71x 1.78x 1.76x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.15x 1.22x ecb-dec 1.16x 1.16x cbc-enc 0.85x 0.90x cbc-dec 1.20x 1.23x ctr-enc 1.28x 1.30x ctr-dec 1.27x 1.28x lrw-enc 1.12x 1.16x lrw-dec 1.08x 1.10x xts-enc 1.11x 1.15x xts-dec 1.14x 1.15x Intel Core2 T8100 (fam:6, model:23, step:6): camellia-asm vs camellia_generic: 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.12x 1.14x 1.16x 1.16x 1.15x 1.02x 1.02x 1.08x 1.08x 64B 1.61x 1.60x 1.17x 1.68x 1.67x 1.66x 1.43x 1.42x 1.44x 1.42x 256B 1.65x 1.73x 1.17x 1.77x 1.81x 1.80x 1.54x 1.53x 1.58x 1.54x 1024B 1.76x 1.74x 1.18x 1.80x 1.85x 1.85x 1.60x 1.59x 1.65x 1.60x 8192B 1.77x 1.75x 1.19x 1.81x 1.85x 1.86x 1.63x 1.61x 1.66x 1.62x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.10x 1.07x 1.13x 1.16x 1.11x 1.16x 1.03x 1.02x 1.08x 1.07x 64B 1.61x 1.62x 1.15x 1.66x 1.63x 1.68x 1.47x 1.46x 1.47x 1.44x 256B 1.71x 1.70x 1.16x 1.75x 1.69x 1.79x 1.58x 1.57x 1.59x 1.55x 1024B 1.78x 1.72x 1.17x 1.75x 1.80x 1.80x 1.63x 1.62x 1.65x 1.62x 8192B 1.76x 1.73x 1.17x 1.78x 1.80x 1.81x 1.64x 1.62x 1.68x 1.64x camellia-asm vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.17x 1.21x ecb-dec 1.17x 1.20x cbc-enc 0.80x 0.82x cbc-dec 1.22x 1.24x ctr-enc 1.25x 1.26x ctr-dec 1.25x 1.26x lrw-enc 1.14x 1.18x lrw-dec 1.13x 1.17x xts-enc 1.14x 1.18x xts-dec 1.14x 1.17x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-05 18:26:47 +00:00
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)"
depends on X86 && 64BIT
depends on CRYPTO
select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
help
Camellia cipher algorithm module (x86_64/AES-NI/AVX2).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
config CRYPTO_CAMELLIA_SPARC64
tristate "Camellia cipher algorithm (SPARC64)"
depends on SPARC64
depends on CRYPTO
select CRYPTO_ALGAPI
help
Camellia cipher algorithm module (SPARC64).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
config CRYPTO_CAST_COMMON
tristate
help
Common parts of the CAST cipher algorithms shared by the
generic c and the assembler implementations.
config CRYPTO_CAST5
tristate "CAST5 (CAST-128) cipher algorithm"
select CRYPTO_ALGAPI
select CRYPTO_CAST_COMMON
help
The CAST5 encryption algorithm (synonymous with CAST-128) is
described in RFC2144.
config CRYPTO_CAST5_AVX_X86_64
tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_BLKCIPHER
select CRYPTO_CAST5
select CRYPTO_CAST_COMMON
select CRYPTO_SIMD
help
The CAST5 encryption algorithm (synonymous with CAST-128) is
described in RFC2144.
This module provides the Cast5 cipher algorithm that processes
sixteen blocks parallel using the AVX instruction set.
config CRYPTO_CAST6
tristate "CAST6 (CAST-256) cipher algorithm"
select CRYPTO_ALGAPI
select CRYPTO_CAST_COMMON
help
The CAST6 encryption algorithm (synonymous with CAST-256) is
described in RFC2612.
crypto: cast6 - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Cast6 block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the functions from the generic module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) cast6-avx-x86_64 vs. cast6-generic 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 1.00x 1.01x 1.01x 0.99x 0.97x 0.98x 1.01x 0.96x 0.98x 64B 0.98x 0.99x 1.02x 1.01x 0.99x 1.00x 1.01x 0.99x 1.00x 0.99x 256B 1.77x 1.84x 0.99x 1.85x 1.77x 1.77x 1.70x 1.74x 1.69x 1.72x 1024B 1.93x 1.95x 0.99x 1.96x 1.93x 1.93x 1.84x 1.85x 1.89x 1.87x 8192B 1.91x 1.95x 0.99x 1.97x 1.95x 1.91x 1.86x 1.87x 1.93x 1.90x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.99x 1.02x 1.01x 0.98x 0.99x 1.00x 1.00x 0.98x 0.98x 64B 0.98x 0.99x 1.01x 1.00x 1.00x 1.00x 1.01x 1.01x 0.97x 1.00x 256B 1.77x 1.83x 1.00x 1.86x 1.79x 1.78x 1.70x 1.76x 1.71x 1.69x 1024B 1.92x 1.95x 0.99x 1.96x 1.93x 1.93x 1.83x 1.86x 1.89x 1.87x 8192B 1.94x 1.95x 0.99x 1.97x 1.95x 1.95x 1.87x 1.87x 1.93x 1.91x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 17:38:57 +00:00
config CRYPTO_CAST6_AVX_X86_64
tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_BLKCIPHER
crypto: cast6 - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Cast6 block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the functions from the generic module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) cast6-avx-x86_64 vs. cast6-generic 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 1.00x 1.01x 1.01x 0.99x 0.97x 0.98x 1.01x 0.96x 0.98x 64B 0.98x 0.99x 1.02x 1.01x 0.99x 1.00x 1.01x 0.99x 1.00x 0.99x 256B 1.77x 1.84x 0.99x 1.85x 1.77x 1.77x 1.70x 1.74x 1.69x 1.72x 1024B 1.93x 1.95x 0.99x 1.96x 1.93x 1.93x 1.84x 1.85x 1.89x 1.87x 8192B 1.91x 1.95x 0.99x 1.97x 1.95x 1.91x 1.86x 1.87x 1.93x 1.90x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.99x 1.02x 1.01x 0.98x 0.99x 1.00x 1.00x 0.98x 0.98x 64B 0.98x 0.99x 1.01x 1.00x 1.00x 1.00x 1.01x 1.01x 0.97x 1.00x 256B 1.77x 1.83x 1.00x 1.86x 1.79x 1.78x 1.70x 1.76x 1.71x 1.69x 1024B 1.92x 1.95x 0.99x 1.96x 1.93x 1.93x 1.83x 1.86x 1.89x 1.87x 8192B 1.94x 1.95x 0.99x 1.97x 1.95x 1.95x 1.87x 1.87x 1.93x 1.91x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 17:38:57 +00:00
select CRYPTO_CAST6
select CRYPTO_CAST_COMMON
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SIMD
crypto: cast6 - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Cast6 block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the functions from the generic module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) cast6-avx-x86_64 vs. cast6-generic 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 1.00x 1.01x 1.01x 0.99x 0.97x 0.98x 1.01x 0.96x 0.98x 64B 0.98x 0.99x 1.02x 1.01x 0.99x 1.00x 1.01x 0.99x 1.00x 0.99x 256B 1.77x 1.84x 0.99x 1.85x 1.77x 1.77x 1.70x 1.74x 1.69x 1.72x 1024B 1.93x 1.95x 0.99x 1.96x 1.93x 1.93x 1.84x 1.85x 1.89x 1.87x 8192B 1.91x 1.95x 0.99x 1.97x 1.95x 1.91x 1.86x 1.87x 1.93x 1.90x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.99x 1.02x 1.01x 0.98x 0.99x 1.00x 1.00x 0.98x 0.98x 64B 0.98x 0.99x 1.01x 1.00x 1.00x 1.00x 1.01x 1.01x 0.97x 1.00x 256B 1.77x 1.83x 1.00x 1.86x 1.79x 1.78x 1.70x 1.76x 1.71x 1.69x 1024B 1.92x 1.95x 0.99x 1.96x 1.93x 1.93x 1.83x 1.86x 1.89x 1.87x 8192B 1.94x 1.95x 0.99x 1.97x 1.95x 1.95x 1.87x 1.87x 1.93x 1.91x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11 17:38:57 +00:00
select CRYPTO_XTS
help
The CAST6 encryption algorithm (synonymous with CAST-256) is
described in RFC2612.
This module provides the Cast6 cipher algorithm that processes
eight blocks parallel using the AVX instruction set.
config CRYPTO_DES
tristate "DES and Triple DES EDE cipher algorithms"
select CRYPTO_ALGAPI
help
DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
config CRYPTO_DES_SPARC64
tristate "DES and Triple DES EDE cipher algorithms (SPARC64)"
depends on SPARC64
select CRYPTO_ALGAPI
select CRYPTO_DES
help
DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3),
optimized using SPARC64 crypto opcodes.
config CRYPTO_DES3_EDE_X86_64
tristate "Triple DES EDE cipher algorithm (x86-64)"
depends on X86 && 64BIT
select CRYPTO_BLKCIPHER
select CRYPTO_DES
help
Triple DES EDE (FIPS 46-3) algorithm.
This module provides implementation of the Triple DES EDE cipher
algorithm that is optimized for x86-64 processors. Two versions of
algorithm are provided; regular processing one input block and
one that processes three blocks parallel.
config CRYPTO_FCRYPT
tristate "FCrypt cipher algorithm"
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
help
FCrypt algorithm used by RxRPC.
config CRYPTO_KHAZAD
tristate "Khazad cipher algorithm"
select CRYPTO_ALGAPI
help
Khazad cipher algorithm.
Khazad was a finalist in the initial NESSIE competition. It is
an algorithm optimized for 64-bit processors with good performance
on 32-bit processors. Khazad uses an 128 bit key size.
See also:
<http://www.larc.usp.br/~pbarreto/KhazadPage.html>
config CRYPTO_SALSA20
tristate "Salsa20 stream cipher algorithm"
select CRYPTO_BLKCIPHER
help
Salsa20 stream cipher algorithm.
Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
The Salsa20 stream cipher algorithm is designed by Daniel J.
Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
config CRYPTO_SALSA20_586
tristate "Salsa20 stream cipher algorithm (i586)"
depends on (X86 || UML_X86) && !64BIT
select CRYPTO_BLKCIPHER
select CRYPTO_SALSA20
help
Salsa20 stream cipher algorithm.
Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
The Salsa20 stream cipher algorithm is designed by Daniel J.
Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
config CRYPTO_SALSA20_X86_64
tristate "Salsa20 stream cipher algorithm (x86_64)"
depends on (X86 || UML_X86) && 64BIT
select CRYPTO_BLKCIPHER
select CRYPTO_SALSA20
help
Salsa20 stream cipher algorithm.
Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
The Salsa20 stream cipher algorithm is designed by Daniel J.
Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
config CRYPTO_CHACHA20
tristate "ChaCha20 cipher algorithm"
select CRYPTO_BLKCIPHER
help
ChaCha20 cipher algorithm, RFC7539.
ChaCha20 is a 256-bit high-speed stream cipher designed by Daniel J.
Bernstein and further specified in RFC7539 for use in IETF protocols.
This is the portable C implementation of ChaCha20.
See also:
<http://cr.yp.to/chacha/chacha-20080128.pdf>
crypto: chacha20 - Add a SSSE3 SIMD variant for x86_64 Implements an x86_64 assembler driver for the ChaCha20 stream cipher. This single block variant works on a single state matrix using SSE instructions. It requires SSSE3 due the use of pshufb for efficient 8/16-bit rotate operations. For large messages, throughput increases by ~65% compared to chacha20-generic: testing speed of chacha20 (chacha20-generic) encryption test 0 (256 bit key, 16 byte blocks): 45089207 operations in 10 seconds (721427312 bytes) test 1 (256 bit key, 64 byte blocks): 43839521 operations in 10 seconds (2805729344 bytes) test 2 (256 bit key, 256 byte blocks): 12702056 operations in 10 seconds (3251726336 bytes) test 3 (256 bit key, 1024 byte blocks): 3371173 operations in 10 seconds (3452081152 bytes) test 4 (256 bit key, 8192 byte blocks): 422468 operations in 10 seconds (3460857856 bytes) testing speed of chacha20 (chacha20-simd) encryption test 0 (256 bit key, 16 byte blocks): 43141886 operations in 10 seconds (690270176 bytes) test 1 (256 bit key, 64 byte blocks): 46845874 operations in 10 seconds (2998135936 bytes) test 2 (256 bit key, 256 byte blocks): 18458512 operations in 10 seconds (4725379072 bytes) test 3 (256 bit key, 1024 byte blocks): 5360533 operations in 10 seconds (5489185792 bytes) test 4 (256 bit key, 8192 byte blocks): 692846 operations in 10 seconds (5675794432 bytes) Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-16 17:14:01 +00:00
config CRYPTO_CHACHA20_X86_64
tristate "ChaCha20 cipher algorithm (x86_64/SSSE3/AVX2)"
crypto: chacha20 - Add a SSSE3 SIMD variant for x86_64 Implements an x86_64 assembler driver for the ChaCha20 stream cipher. This single block variant works on a single state matrix using SSE instructions. It requires SSSE3 due the use of pshufb for efficient 8/16-bit rotate operations. For large messages, throughput increases by ~65% compared to chacha20-generic: testing speed of chacha20 (chacha20-generic) encryption test 0 (256 bit key, 16 byte blocks): 45089207 operations in 10 seconds (721427312 bytes) test 1 (256 bit key, 64 byte blocks): 43839521 operations in 10 seconds (2805729344 bytes) test 2 (256 bit key, 256 byte blocks): 12702056 operations in 10 seconds (3251726336 bytes) test 3 (256 bit key, 1024 byte blocks): 3371173 operations in 10 seconds (3452081152 bytes) test 4 (256 bit key, 8192 byte blocks): 422468 operations in 10 seconds (3460857856 bytes) testing speed of chacha20 (chacha20-simd) encryption test 0 (256 bit key, 16 byte blocks): 43141886 operations in 10 seconds (690270176 bytes) test 1 (256 bit key, 64 byte blocks): 46845874 operations in 10 seconds (2998135936 bytes) test 2 (256 bit key, 256 byte blocks): 18458512 operations in 10 seconds (4725379072 bytes) test 3 (256 bit key, 1024 byte blocks): 5360533 operations in 10 seconds (5489185792 bytes) test 4 (256 bit key, 8192 byte blocks): 692846 operations in 10 seconds (5675794432 bytes) Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-16 17:14:01 +00:00
depends on X86 && 64BIT
select CRYPTO_BLKCIPHER
select CRYPTO_CHACHA20
help
ChaCha20 cipher algorithm, RFC7539.
ChaCha20 is a 256-bit high-speed stream cipher designed by Daniel J.
Bernstein and further specified in RFC7539 for use in IETF protocols.
This is the x86_64 assembler implementation using SIMD instructions.
See also:
<http://cr.yp.to/chacha/chacha-20080128.pdf>
config CRYPTO_SEED
tristate "SEED cipher algorithm"
select CRYPTO_ALGAPI
help
SEED cipher algorithm (RFC4269).
SEED is a 128-bit symmetric key block cipher that has been
developed by KISA (Korea Information Security Agency) as a
national standard encryption algorithm of the Republic of Korea.
It is a 16 round block cipher with the key size of 128 bit.
See also:
<http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp>
config CRYPTO_SERPENT
tristate "Serpent cipher algorithm"
select CRYPTO_ALGAPI
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits. Also includes the 'Tnepres' algorithm, a reversed
variant of Serpent for compatibility with old kerneli.org code.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
crypto: serpent - add 8-way parallel x86_64/SSE2 assembler implementation Patch adds x86_64/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in eigth block chunks (two 4 block chunk SSE2 operations in parallel to improve performance on out-of-order CPUs). Glue code is based on one from AES-NI implementation, so requests from irq context are redirected to cryptd. v2: - add missing include of linux/module.h (appearently crypto.h used to include module.h, which changed for 3.2 by commit 7c926402a7e8c9b279968fd94efec8700ba3859e) Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): AMD Phenom II 1055T (fam:16, model:10): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 1.03x 1.01x 1.03x 1.05x 1.00x 0.99x 64B 1.00x 1.01x 1.02x 1.04x 1.02x 1.01x 256B 2.34x 2.41x 0.99x 2.43x 2.39x 2.40x 1024B 2.51x 2.57x 1.00x 2.59x 2.56x 2.56x 8192B 2.50x 2.54x 1.00x 2.55x 2.57x 2.57x Intel Celeron T1600 (fam:6, model:15, step:13): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.97x 0.97x 1.01x 1.01x 1.01x 1.02x 64B 1.00x 1.00x 1.00x 1.02x 1.01x 1.01x 256B 3.41x 3.35x 1.00x 3.39x 3.42x 3.44x 1024B 3.75x 3.72x 0.99x 3.74x 3.75x 3.75x 8192B 3.70x 3.68x 0.99x 3.68x 3.69x 3.69x Full output: http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-sse2.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-sse2.txt Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 14:26:25 +00:00
config CRYPTO_SERPENT_SSE2_X86_64
tristate "Serpent cipher algorithm (x86_64/SSE2)"
depends on X86 && 64BIT
select CRYPTO_BLKCIPHER
select CRYPTO_GLUE_HELPER_X86
crypto: serpent - add 8-way parallel x86_64/SSE2 assembler implementation Patch adds x86_64/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in eigth block chunks (two 4 block chunk SSE2 operations in parallel to improve performance on out-of-order CPUs). Glue code is based on one from AES-NI implementation, so requests from irq context are redirected to cryptd. v2: - add missing include of linux/module.h (appearently crypto.h used to include module.h, which changed for 3.2 by commit 7c926402a7e8c9b279968fd94efec8700ba3859e) Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): AMD Phenom II 1055T (fam:16, model:10): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 1.03x 1.01x 1.03x 1.05x 1.00x 0.99x 64B 1.00x 1.01x 1.02x 1.04x 1.02x 1.01x 256B 2.34x 2.41x 0.99x 2.43x 2.39x 2.40x 1024B 2.51x 2.57x 1.00x 2.59x 2.56x 2.56x 8192B 2.50x 2.54x 1.00x 2.55x 2.57x 2.57x Intel Celeron T1600 (fam:6, model:15, step:13): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.97x 0.97x 1.01x 1.01x 1.01x 1.02x 64B 1.00x 1.00x 1.00x 1.02x 1.01x 1.01x 256B 3.41x 3.35x 1.00x 3.39x 3.42x 3.44x 1024B 3.75x 3.72x 0.99x 3.74x 3.75x 3.75x 8192B 3.70x 3.68x 0.99x 3.68x 3.69x 3.69x Full output: http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-sse2.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-sse2.txt Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 14:26:25 +00:00
select CRYPTO_SERPENT
select CRYPTO_SIMD
crypto: serpent - add 8-way parallel x86_64/SSE2 assembler implementation Patch adds x86_64/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in eigth block chunks (two 4 block chunk SSE2 operations in parallel to improve performance on out-of-order CPUs). Glue code is based on one from AES-NI implementation, so requests from irq context are redirected to cryptd. v2: - add missing include of linux/module.h (appearently crypto.h used to include module.h, which changed for 3.2 by commit 7c926402a7e8c9b279968fd94efec8700ba3859e) Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): AMD Phenom II 1055T (fam:16, model:10): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 1.03x 1.01x 1.03x 1.05x 1.00x 0.99x 64B 1.00x 1.01x 1.02x 1.04x 1.02x 1.01x 256B 2.34x 2.41x 0.99x 2.43x 2.39x 2.40x 1024B 2.51x 2.57x 1.00x 2.59x 2.56x 2.56x 8192B 2.50x 2.54x 1.00x 2.55x 2.57x 2.57x Intel Celeron T1600 (fam:6, model:15, step:13): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.97x 0.97x 1.01x 1.01x 1.01x 1.02x 64B 1.00x 1.00x 1.00x 1.02x 1.01x 1.01x 256B 3.41x 3.35x 1.00x 3.39x 3.42x 3.44x 1024B 3.75x 3.72x 0.99x 3.74x 3.75x 3.75x 8192B 3.70x 3.68x 0.99x 3.68x 3.69x 3.69x Full output: http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-sse2.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-sse2.txt Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 14:26:25 +00:00
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides Serpent cipher algorithm that processes eight
crypto: serpent - add 8-way parallel x86_64/SSE2 assembler implementation Patch adds x86_64/SSE2 assembler implementation of serpent cipher. Assembler functions crypt data in eigth block chunks (two 4 block chunk SSE2 operations in parallel to improve performance on out-of-order CPUs). Glue code is based on one from AES-NI implementation, so requests from irq context are redirected to cryptd. v2: - add missing include of linux/module.h (appearently crypto.h used to include module.h, which changed for 3.2 by commit 7c926402a7e8c9b279968fd94efec8700ba3859e) Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmarks results (serpent-sse2/serpent_generic speed ratios): AMD Phenom II 1055T (fam:16, model:10): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 1.03x 1.01x 1.03x 1.05x 1.00x 0.99x 64B 1.00x 1.01x 1.02x 1.04x 1.02x 1.01x 256B 2.34x 2.41x 0.99x 2.43x 2.39x 2.40x 1024B 2.51x 2.57x 1.00x 2.59x 2.56x 2.56x 8192B 2.50x 2.54x 1.00x 2.55x 2.57x 2.57x Intel Celeron T1600 (fam:6, model:15, step:13): size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.97x 0.97x 1.01x 1.01x 1.01x 1.02x 64B 1.00x 1.00x 1.00x 1.02x 1.01x 1.01x 256B 3.41x 3.35x 1.00x 3.39x 3.42x 3.44x 1024B 3.75x 3.72x 0.99x 3.74x 3.75x 3.75x 8192B 3.70x 3.68x 0.99x 3.68x 3.69x 3.69x Full output: http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/phenom-ii-1055t/serpent-sse2.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-generic.txt http://koti.mbnet.fi/axh/kernel/crypto/celeron-t1600/serpent-sse2.txt Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 14:26:25 +00:00
blocks parallel using SSE2 instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SERPENT_SSE2_586
tristate "Serpent cipher algorithm (i586/SSE2)"
depends on X86 && !64BIT
select CRYPTO_BLKCIPHER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_SIMD
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides Serpent cipher algorithm that processes four
blocks parallel using SSE2 instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
crypto: serpent - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Serpent block cipher. The implementation is very similar to the sse2 implementation and processes eight blocks in parallel. Because of the new non-destructive three operand syntax all move-instructions can be removed and therefore a little performance increase is provided. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) serpent-avx-x86_64 vs. serpent-sse2-x86_64 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.03x 1.01x 1.01x 1.01x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 0.99x 1.00x 1.01x 1.00x 1.00x 256B 1.05x 1.03x 1.00x 1.02x 1.05x 1.06x 1.05x 1.02x 1.05x 1.02x 1024B 1.05x 1.02x 1.00x 1.02x 1.05x 1.06x 1.05x 1.03x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.03x 1.04x 1.02x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.01x 1.00x 1.01x 1.01x 1.00x 1.00x 0.99x 1.03x 1.01x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 1.00x 1.02x 256B 1.05x 1.02x 1.00x 1.02x 1.05x 1.02x 1.04x 1.05x 1.05x 1.02x 1024B 1.06x 1.02x 1.00x 1.02x 1.07x 1.06x 1.05x 1.04x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.05x 1.05x 1.02x serpent-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.26x 1.73x ecb-dec 1.20x 1.64x cbc-enc 0.33x 0.45x cbc-dec 1.24x 1.67x ctr-enc 1.32x 1.76x ctr-dec 1.32x 1.76x lrw-enc 1.20x 1.60x lrw-dec 1.15x 1.54x xts-enc 1.22x 1.64x xts-dec 1.17x 1.57x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-12 08:47:43 +00:00
config CRYPTO_SERPENT_AVX_X86_64
tristate "Serpent cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_BLKCIPHER
select CRYPTO_GLUE_HELPER_X86
crypto: serpent - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Serpent block cipher. The implementation is very similar to the sse2 implementation and processes eight blocks in parallel. Because of the new non-destructive three operand syntax all move-instructions can be removed and therefore a little performance increase is provided. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) serpent-avx-x86_64 vs. serpent-sse2-x86_64 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.03x 1.01x 1.01x 1.01x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 0.99x 1.00x 1.01x 1.00x 1.00x 256B 1.05x 1.03x 1.00x 1.02x 1.05x 1.06x 1.05x 1.02x 1.05x 1.02x 1024B 1.05x 1.02x 1.00x 1.02x 1.05x 1.06x 1.05x 1.03x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.03x 1.04x 1.02x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.01x 1.00x 1.01x 1.01x 1.00x 1.00x 0.99x 1.03x 1.01x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 1.00x 1.02x 256B 1.05x 1.02x 1.00x 1.02x 1.05x 1.02x 1.04x 1.05x 1.05x 1.02x 1024B 1.06x 1.02x 1.00x 1.02x 1.07x 1.06x 1.05x 1.04x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.05x 1.05x 1.02x serpent-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.26x 1.73x ecb-dec 1.20x 1.64x cbc-enc 0.33x 0.45x cbc-dec 1.24x 1.67x ctr-enc 1.32x 1.76x ctr-dec 1.32x 1.76x lrw-enc 1.20x 1.60x lrw-dec 1.15x 1.54x xts-enc 1.22x 1.64x xts-dec 1.17x 1.57x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-12 08:47:43 +00:00
select CRYPTO_SERPENT
select CRYPTO_SIMD
crypto: serpent - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Serpent block cipher. The implementation is very similar to the sse2 implementation and processes eight blocks in parallel. Because of the new non-destructive three operand syntax all move-instructions can be removed and therefore a little performance increase is provided. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) serpent-avx-x86_64 vs. serpent-sse2-x86_64 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.03x 1.01x 1.01x 1.01x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 0.99x 1.00x 1.01x 1.00x 1.00x 256B 1.05x 1.03x 1.00x 1.02x 1.05x 1.06x 1.05x 1.02x 1.05x 1.02x 1024B 1.05x 1.02x 1.00x 1.02x 1.05x 1.06x 1.05x 1.03x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.03x 1.04x 1.02x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.01x 1.00x 1.01x 1.01x 1.00x 1.00x 0.99x 1.03x 1.01x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 1.00x 1.02x 256B 1.05x 1.02x 1.00x 1.02x 1.05x 1.02x 1.04x 1.05x 1.05x 1.02x 1024B 1.06x 1.02x 1.00x 1.02x 1.07x 1.06x 1.05x 1.04x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.05x 1.05x 1.02x serpent-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.26x 1.73x ecb-dec 1.20x 1.64x cbc-enc 0.33x 0.45x cbc-dec 1.24x 1.67x ctr-enc 1.32x 1.76x ctr-dec 1.32x 1.76x lrw-enc 1.20x 1.60x lrw-dec 1.15x 1.54x xts-enc 1.22x 1.64x xts-dec 1.17x 1.57x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-12 08:47:43 +00:00
select CRYPTO_XTS
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides the Serpent cipher algorithm that processes
eight blocks parallel using the AVX instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SERPENT_AVX2_X86_64
tristate "Serpent cipher algorithm (x86_64/AVX2)"
depends on X86 && 64BIT
select CRYPTO_SERPENT_AVX_X86_64
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides Serpent cipher algorithm that processes 16
blocks parallel using AVX2 instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SM4
tristate "SM4 cipher algorithm"
select CRYPTO_ALGAPI
help
SM4 cipher algorithms (OSCCA GB/T 32907-2016).
SM4 (GBT.32907-2016) is a cryptographic standard issued by the
Organization of State Commercial Administration of China (OSCCA)
as an authorized cryptographic algorithms for the use within China.
SMS4 was originally created for use in protecting wireless
networks, and is mandated in the Chinese National Standard for
Wireless LAN WAPI (Wired Authentication and Privacy Infrastructure)
(GB.15629.11-2003).
The latest SM4 standard (GBT.32907-2016) was proposed by OSCCA and
standardized through TC 260 of the Standardization Administration
of the People's Republic of China (SAC).
The input, output, and key of SMS4 are each 128 bits.
See also: <https://eprint.iacr.org/2008/329.pdf>
If unsure, say N.
crypto: speck - add support for the Speck block cipher Add a generic implementation of Speck, including the Speck128 and Speck64 variants. Speck is a lightweight block cipher that can be much faster than AES on processors that don't have AES instructions. We are planning to offer Speck-XTS (probably Speck128/256-XTS) as an option for dm-crypt and fscrypt on Android, for low-end mobile devices with older CPUs such as ARMv7 which don't have the Cryptography Extensions. Currently, such devices are unencrypted because AES is not fast enough, even when the NEON bit-sliced implementation of AES is used. Other AES alternatives such as Twofish, Threefish, Camellia, CAST6, and Serpent aren't fast enough either; it seems that only a modern ARX cipher can provide sufficient performance on these devices. This is a replacement for our original proposal (https://patchwork.kernel.org/patch/10101451/) which was to offer ChaCha20 for these devices. However, the use of a stream cipher for disk/file encryption with no space to store nonces would have been much more insecure than we thought initially, given that it would be used on top of flash storage as well as potentially on top of F2FS, neither of which is guaranteed to overwrite data in-place. Speck has been somewhat controversial due to its origin. Nevertheless, it has a straightforward design (it's an ARX cipher), and it appears to be the leading software-optimized lightweight block cipher currently, with the most cryptanalysis. It's also easy to implement without side channels, unlike AES. Moreover, we only intend Speck to be used when the status quo is no encryption, due to AES not being fast enough. We've also considered a novel length-preserving encryption mode based on ChaCha20 and Poly1305. While theoretically attractive, such a mode would be a brand new crypto construction and would be more complicated and difficult to implement efficiently in comparison to Speck-XTS. There is confusion about the byte and word orders of Speck, since the original paper doesn't specify them. But we have implemented it using the orders the authors recommended in a correspondence with them. The test vectors are taken from the original paper but were mapped to byte arrays using the recommended byte and word orders. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-14 18:42:19 +00:00
config CRYPTO_SPECK
tristate "Speck cipher algorithm"
select CRYPTO_ALGAPI
help
Speck is a lightweight block cipher that is tuned for optimal
performance in software (rather than hardware).
Speck may not be as secure as AES, and should only be used on systems
where AES is not fast enough.
See also: <https://eprint.iacr.org/2013/404.pdf>
If unsure, say N.
config CRYPTO_TEA
tristate "TEA, XTEA and XETA cipher algorithms"
select CRYPTO_ALGAPI
help
TEA cipher algorithm.
Tiny Encryption Algorithm is a simple cipher that uses
many rounds for security. It is very fast and uses
little memory.
Xtendend Tiny Encryption Algorithm is a modification to
the TEA algorithm to address a potential key weakness
in the TEA algorithm.
Xtendend Encryption Tiny Algorithm is a mis-implementation
of the XTEA algorithm for compatibility purposes.
config CRYPTO_TWOFISH
tristate "Twofish cipher algorithm"
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
help
Twofish cipher algorithm.
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
See also:
<http://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_COMMON
tristate
help
Common parts of the Twofish cipher algorithm shared by the
generic c and the assembler implementations.
config CRYPTO_TWOFISH_586
tristate "Twofish cipher algorithms (i586)"
depends on (X86 || UML_X86) && !64BIT
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
help
Twofish cipher algorithm.
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
See also:
<http://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_X86_64
tristate "Twofish cipher algorithm (x86_64)"
depends on (X86 || UML_X86) && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
help
Twofish cipher algorithm (x86_64).
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
See also:
<http://www.schneier.com/twofish.html>
crypto: twofish - add 3-way parallel x86_64 assembler implemention Patch adds 3-way parallel x86_64 assembly implementation of twofish as new module. New assembler functions crypt data in three blocks chunks, improving cipher performance on out-of-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Summary of the tcrypt benchmarks: Twofish 3-way-asm vs twofish asm (128bit 8kb block ECB) encrypt: 1.3x speed decrypt: 1.3x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CBC) encrypt: 1.07x speed decrypt: 1.4x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CTR) encrypt: 1.4x speed Twofish 3-way-asm vs AES asm (128bit 8kb block ECB) encrypt: 1.0x speed decrypt: 1.0x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CBC) encrypt: 0.84x speed decrypt: 1.09x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CTR) encrypt: 1.15x speed Full output: http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-3way-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-aes-asm-x86_64.txt Tests were run on: vendor_id : AuthenticAMD cpu family : 16 model : 10 model name : AMD Phenom(tm) II X6 1055T Processor Also userspace test were run on: vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU E7330 @ 2.40GHz stepping : 11 Userspace test results: Encryption/decryption of twofish 3-way vs x86_64-asm on AMD Phenom II: encrypt: 1.27x decrypt: 1.25x Encryption/decryption of twofish 3-way vs x86_64-asm on Intel Xeon E7330: encrypt: 1.36x decrypt: 1.36x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-26 13:47:25 +00:00
config CRYPTO_TWOFISH_X86_64_3WAY
tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
depends on X86 && 64BIT
select CRYPTO_BLKCIPHER
crypto: twofish - add 3-way parallel x86_64 assembler implemention Patch adds 3-way parallel x86_64 assembly implementation of twofish as new module. New assembler functions crypt data in three blocks chunks, improving cipher performance on out-of-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Summary of the tcrypt benchmarks: Twofish 3-way-asm vs twofish asm (128bit 8kb block ECB) encrypt: 1.3x speed decrypt: 1.3x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CBC) encrypt: 1.07x speed decrypt: 1.4x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CTR) encrypt: 1.4x speed Twofish 3-way-asm vs AES asm (128bit 8kb block ECB) encrypt: 1.0x speed decrypt: 1.0x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CBC) encrypt: 0.84x speed decrypt: 1.09x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CTR) encrypt: 1.15x speed Full output: http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-3way-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-aes-asm-x86_64.txt Tests were run on: vendor_id : AuthenticAMD cpu family : 16 model : 10 model name : AMD Phenom(tm) II X6 1055T Processor Also userspace test were run on: vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU E7330 @ 2.40GHz stepping : 11 Userspace test results: Encryption/decryption of twofish 3-way vs x86_64-asm on AMD Phenom II: encrypt: 1.27x decrypt: 1.25x Encryption/decryption of twofish 3-way vs x86_64-asm on Intel Xeon E7330: encrypt: 1.36x decrypt: 1.36x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-26 13:47:25 +00:00
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
select CRYPTO_GLUE_HELPER_X86
crypto: twofish - add 3-way parallel x86_64 assembler implemention Patch adds 3-way parallel x86_64 assembly implementation of twofish as new module. New assembler functions crypt data in three blocks chunks, improving cipher performance on out-of-order CPUs. Patch has been tested with tcrypt and automated filesystem tests. Summary of the tcrypt benchmarks: Twofish 3-way-asm vs twofish asm (128bit 8kb block ECB) encrypt: 1.3x speed decrypt: 1.3x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CBC) encrypt: 1.07x speed decrypt: 1.4x speed Twofish 3-way-asm vs twofish asm (128bit 8kb block CTR) encrypt: 1.4x speed Twofish 3-way-asm vs AES asm (128bit 8kb block ECB) encrypt: 1.0x speed decrypt: 1.0x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CBC) encrypt: 0.84x speed decrypt: 1.09x speed Twofish 3-way-asm vs AES asm (128bit 8kb block CTR) encrypt: 1.15x speed Full output: http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-3way-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-twofish-asm-x86_64.txt http://koti.mbnet.fi/axh/kernel/crypto/tcrypt-speed-aes-asm-x86_64.txt Tests were run on: vendor_id : AuthenticAMD cpu family : 16 model : 10 model name : AMD Phenom(tm) II X6 1055T Processor Also userspace test were run on: vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU E7330 @ 2.40GHz stepping : 11 Userspace test results: Encryption/decryption of twofish 3-way vs x86_64-asm on AMD Phenom II: encrypt: 1.27x decrypt: 1.25x Encryption/decryption of twofish 3-way vs x86_64-asm on Intel Xeon E7330: encrypt: 1.36x decrypt: 1.36x Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-26 13:47:25 +00:00
help
Twofish cipher algorithm (x86_64, 3-way parallel).
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
This module provides Twofish cipher algorithm that processes three
blocks parallel, utilizing resources of out-of-order CPUs better.
See also:
<http://www.schneier.com/twofish.html>
crypto: twofish - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Twofish block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the 3way-parallel functions from the twofish-x86_64-3way module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) twofish-avx-x86_64 vs. twofish-x86_64-3way 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.96x 0.97x 1.00x 0.95x 0.97x 0.97x 0.96x 0.95x 0.95x 0.98x 64B 0.99x 0.99x 1.00x 0.99x 0.98x 0.98x 0.99x 0.98x 0.99x 0.98x 256B 1.20x 1.21x 1.00x 1.19x 1.15x 1.14x 1.19x 1.20x 1.18x 1.19x 1024B 1.29x 1.30x 1.00x 1.28x 1.23x 1.24x 1.26x 1.28x 1.26x 1.27x 8192B 1.31x 1.32x 1.00x 1.31x 1.25x 1.25x 1.28x 1.29x 1.28x 1.30x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.96x 0.96x 1.00x 0.96x 0.97x 0.98x 0.95x 0.95x 0.95x 0.96x 64B 1.00x 0.99x 1.00x 0.98x 0.98x 1.01x 0.98x 0.98x 0.98x 0.98x 256B 1.20x 1.21x 1.00x 1.21x 1.15x 1.15x 1.19x 1.20x 1.18x 1.19x 1024B 1.29x 1.30x 1.00x 1.28x 1.23x 1.23x 1.26x 1.27x 1.26x 1.27x 8192B 1.31x 1.33x 1.00x 1.31x 1.26x 1.26x 1.29x 1.29x 1.28x 1.30x twofish-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.19x 1.63x ecb-dec 1.18x 1.62x cbc-enc 0.75x 1.03x cbc-dec 1.23x 1.67x ctr-enc 1.24x 1.65x ctr-dec 1.24x 1.65x lrw-enc 1.15x 1.53x lrw-dec 1.14x 1.52x xts-enc 1.16x 1.56x xts-dec 1.16x 1.56x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-05-28 13:54:24 +00:00
config CRYPTO_TWOFISH_AVX_X86_64
tristate "Twofish cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_BLKCIPHER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SIMD
crypto: twofish - add x86_64/avx assembler implementation This patch adds a x86_64/avx assembler implementation of the Twofish block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the 3way-parallel functions from the twofish-x86_64-3way module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) twofish-avx-x86_64 vs. twofish-x86_64-3way 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.96x 0.97x 1.00x 0.95x 0.97x 0.97x 0.96x 0.95x 0.95x 0.98x 64B 0.99x 0.99x 1.00x 0.99x 0.98x 0.98x 0.99x 0.98x 0.99x 0.98x 256B 1.20x 1.21x 1.00x 1.19x 1.15x 1.14x 1.19x 1.20x 1.18x 1.19x 1024B 1.29x 1.30x 1.00x 1.28x 1.23x 1.24x 1.26x 1.28x 1.26x 1.27x 8192B 1.31x 1.32x 1.00x 1.31x 1.25x 1.25x 1.28x 1.29x 1.28x 1.30x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.96x 0.96x 1.00x 0.96x 0.97x 0.98x 0.95x 0.95x 0.95x 0.96x 64B 1.00x 0.99x 1.00x 0.98x 0.98x 1.01x 0.98x 0.98x 0.98x 0.98x 256B 1.20x 1.21x 1.00x 1.21x 1.15x 1.15x 1.19x 1.20x 1.18x 1.19x 1024B 1.29x 1.30x 1.00x 1.28x 1.23x 1.23x 1.26x 1.27x 1.26x 1.27x 8192B 1.31x 1.33x 1.00x 1.31x 1.26x 1.26x 1.29x 1.29x 1.28x 1.30x twofish-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.19x 1.63x ecb-dec 1.18x 1.62x cbc-enc 0.75x 1.03x cbc-dec 1.23x 1.67x ctr-enc 1.24x 1.65x ctr-dec 1.24x 1.65x lrw-enc 1.15x 1.53x lrw-dec 1.14x 1.52x xts-enc 1.16x 1.56x xts-dec 1.16x 1.56x Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-05-28 13:54:24 +00:00
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
select CRYPTO_TWOFISH_X86_64_3WAY
help
Twofish cipher algorithm (x86_64/AVX).
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
This module provides the Twofish cipher algorithm that processes
eight blocks parallel using the AVX Instruction Set.
See also:
<http://www.schneier.com/twofish.html>
comment "Compression"
config CRYPTO_DEFLATE
tristate "Deflate compression algorithm"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select ZLIB_INFLATE
select ZLIB_DEFLATE
help
This is the Deflate algorithm (RFC1951), specified for use in
IPSec with the IPCOMP protocol (RFC3173, RFC2394).
You will most probably want this if using IPSec.
config CRYPTO_LZO
tristate "LZO compression algorithm"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select LZO_COMPRESS
select LZO_DECOMPRESS
help
This is the LZO algorithm.
config CRYPTO_842
tristate "842 compression algorithm"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select 842_COMPRESS
select 842_DECOMPRESS
help
This is the 842 algorithm.
config CRYPTO_LZ4
tristate "LZ4 compression algorithm"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select LZ4_COMPRESS
select LZ4_DECOMPRESS
help
This is the LZ4 algorithm.
config CRYPTO_LZ4HC
tristate "LZ4HC compression algorithm"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select LZ4HC_COMPRESS
select LZ4_DECOMPRESS
help
This is the LZ4 high compression mode algorithm.
config CRYPTO_ZSTD
tristate "Zstd compression algorithm"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select ZSTD_COMPRESS
select ZSTD_DECOMPRESS
help
This is the zstd algorithm.
comment "Random Number Generation"
config CRYPTO_ANSI_CPRNG
tristate "Pseudo Random Number Generation for Cryptographic modules"
select CRYPTO_AES
select CRYPTO_RNG
help
This option enables the generic pseudo random number generator
for cryptographic modules. Uses the Algorithm specified in
ANSI X9.31 A.2.4. Note that this option must be enabled if
CRYPTO_FIPS is selected
menuconfig CRYPTO_DRBG_MENU
tristate "NIST SP800-90A DRBG"
help
NIST SP800-90A compliant DRBG. In the following submenu, one or
more of the DRBG types must be selected.
if CRYPTO_DRBG_MENU
config CRYPTO_DRBG_HMAC
bool
default y
select CRYPTO_HMAC
select CRYPTO_SHA256
config CRYPTO_DRBG_HASH
bool "Enable Hash DRBG"
select CRYPTO_SHA256
help
Enable the Hash DRBG variant as defined in NIST SP800-90A.
config CRYPTO_DRBG_CTR
bool "Enable CTR DRBG"
select CRYPTO_AES
depends on CRYPTO_CTR
help
Enable the CTR DRBG variant as defined in NIST SP800-90A.
config CRYPTO_DRBG
tristate
default CRYPTO_DRBG_MENU
select CRYPTO_RNG
select CRYPTO_JITTERENTROPY
endif # if CRYPTO_DRBG_MENU
config CRYPTO_JITTERENTROPY
tristate "Jitterentropy Non-Deterministic Random Number Generator"
select CRYPTO_RNG
help
The Jitterentropy RNG is a noise that is intended
to provide seed to another RNG. The RNG does not
perform any cryptographic whitening of the generated
random numbers. This Jitterentropy RNG registers with
the kernel crypto API and can be used by any caller.
config CRYPTO_USER_API
tristate
config CRYPTO_USER_API_HASH
tristate "User-space interface for hash algorithms"
depends on NET
select CRYPTO_HASH
select CRYPTO_USER_API
help
This option enables the user-spaces interface for hash
algorithms.
config CRYPTO_USER_API_SKCIPHER
tristate "User-space interface for symmetric key cipher algorithms"
depends on NET
select CRYPTO_BLKCIPHER
select CRYPTO_USER_API
help
This option enables the user-spaces interface for symmetric
key cipher algorithms.
config CRYPTO_USER_API_RNG
tristate "User-space interface for random number generator algorithms"
depends on NET
select CRYPTO_RNG
select CRYPTO_USER_API
help
This option enables the user-spaces interface for random
number generator algorithms.
config CRYPTO_USER_API_AEAD
tristate "User-space interface for AEAD cipher algorithms"
depends on NET
select CRYPTO_AEAD
select CRYPTO_BLKCIPHER
select CRYPTO_NULL
select CRYPTO_USER_API
help
This option enables the user-spaces interface for AEAD
cipher algorithms.
config CRYPTO_HASH_INFO
bool
source "drivers/crypto/Kconfig"
source crypto/asymmetric_keys/Kconfig
source certs/Kconfig
endif # if CRYPTO