linux/drivers/iio/light/Makefile

#
# Makefile for IIO Light sensors
#

obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
iio: add LM3533 ambient-light-sensor driver Add sub-driver for the ambient-light-sensor interface on National Semiconductor / TI LM3533 lighting power chips. The sensor interface can be used to control the LEDs and backlights of the chip through defining five light zones and three sets of corresponding output-current values. The driver provides raw and mean adc readings along with the current light zone through sysfs. A threshold event can be generated on zone changes. The ALS-control output values can be set per zone for the three current output channels. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-05-21 12:18:06 +00:00			`#`
			`# Makefile for IIO Light sensors`
			`#`

iio: add adjd_s311 I2C digital color sensor driver sensor has 4 channels (10-bit each, R/G/B and clear), sensitivity and gain is controlled in the driver by ext_info integration_time and CHAN_INFO_HARDWAREGAIN driver supports triggered buffer and IIO_CHAN_INFO_RAW to get the sensor data v5: address comments by Jonathan Cameron * use macro for channel declaration * get timestamp right before measurement * cleanups v4: address comments by Lars-Peter Clausen * make sure trigger handler is exited with iio_trigger_notify_done() and IRQ_HANDLED * kfree()/kalloc() -> krealloc() v3: * fix warnings v2: address comments by Lars-Peter Clausen * buffer allocation now in update_scan_mode instead of in trigger handler * simplify trigger code (assume active_scan_mask is not empty, use for_each_set_bit, use iio_push_to_buffer) * reorder entry in Makefile and Kconfig * fix remove Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2012-07-10 21:32:00 +00:00			`obj-$(CONFIG_ADJD_S311) += adjd_s311.o`
iio: add LM3533 ambient-light-sensor driver Add sub-driver for the ambient-light-sensor interface on National Semiconductor / TI LM3533 lighting power chips. The sensor interface can be used to control the LEDs and backlights of the chip through defining five light zones and three sets of corresponding output-current values. The driver provides raw and mean adc readings along with the current light zone through sysfs. A threshold event can be generated on zone changes. The ALS-control output values can be set per zone for the three current output channels. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-05-21 12:18:06 +00:00			`obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o`
iio:light:tsl2563 move out of staging This driver is simple, uses the latest interfaces and contains few if any controversial elements. All of its interfaces have been in place for a long time now. Hence let's move it out of staging. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Peter Meerwald <pmeerw@pmeerw.net> 2013-01-12 10:35:00 +00:00			`obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o`
iio: add vcnl4000 combined ALS and proximity sensor minimal driver, no IR current control and proximity/event handling yet v5: * checkpatch warnings * increase msleep() to 20 ms when waiting for data ready as measurement/conversion can take up to 100 ms, 1 ms is too short v4 (address comments by Jonathan Cameron) * remove SENSORS_ prefix in Kconfig * change from IIO_INTENSITY to IIO_LIGHT * move from staging v3 (address comments by Shubhrajyoti Datta) * cleanup Kconfig entry * call I2C read/write functions directly v2 (address comments by Lars-Peter Clausen and Jonathan Cameron) * unify code for reading PS and AL data into parameterized _measure() function * limit wait for data to become ready within 20 tries * drop IIO_LIGHT channel, add SCALE to IIO_INTENSITY * drop extra string arguments used for logging purpose only Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-06-19 07:58:54 +00:00			`obj-$(CONFIG_VCNL4000) += vcnl4000.o`
iio: hid-sensors: Added ALS Added usage id processing for ALS. This uses IIO interfaces for triggered buffer to present data to user mode.This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2012-09-05 12:56:00 +00:00			`obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o`