2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* PMac Tumbler/Snapper lowlevel functions
|
|
|
|
*
|
|
|
|
* Copyright (c) by Takashi Iwai <tiwai@suse.de>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*
|
|
|
|
* Rene Rebe <rene.rebe@gmx.net>:
|
|
|
|
* * update from shadow registers on wakeup and headphone plug
|
|
|
|
* * automatically toggle DRC on headphone plug
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/kmod.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <sound/core.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/irq.h>
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
#include <asm/machdep.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <asm/pmac_feature.h>
|
|
|
|
#include "pmac.h"
|
|
|
|
#include "tumbler_volume.h"
|
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
#undef DEBUG
|
|
|
|
|
|
|
|
#ifdef DEBUG
|
2009-02-05 15:02:46 +00:00
|
|
|
#define DBG(fmt...) printk(KERN_DEBUG fmt)
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
#else
|
|
|
|
#define DBG(fmt...)
|
|
|
|
#endif
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/* i2c address for tumbler */
|
|
|
|
#define TAS_I2C_ADDR 0x34
|
|
|
|
|
|
|
|
/* registers */
|
|
|
|
#define TAS_REG_MCS 0x01 /* main control */
|
|
|
|
#define TAS_REG_DRC 0x02
|
|
|
|
#define TAS_REG_VOL 0x04
|
|
|
|
#define TAS_REG_TREBLE 0x05
|
|
|
|
#define TAS_REG_BASS 0x06
|
|
|
|
#define TAS_REG_INPUT1 0x07
|
|
|
|
#define TAS_REG_INPUT2 0x08
|
|
|
|
|
|
|
|
/* tas3001c */
|
|
|
|
#define TAS_REG_PCM TAS_REG_INPUT1
|
|
|
|
|
|
|
|
/* tas3004 */
|
|
|
|
#define TAS_REG_LMIX TAS_REG_INPUT1
|
|
|
|
#define TAS_REG_RMIX TAS_REG_INPUT2
|
|
|
|
#define TAS_REG_MCS2 0x43 /* main control 2 */
|
|
|
|
#define TAS_REG_ACS 0x40 /* analog control */
|
|
|
|
|
|
|
|
/* mono volumes for tas3001c/tas3004 */
|
|
|
|
enum {
|
|
|
|
VOL_IDX_PCM_MONO, /* tas3001c only */
|
|
|
|
VOL_IDX_BASS, VOL_IDX_TREBLE,
|
|
|
|
VOL_IDX_LAST_MONO
|
|
|
|
};
|
|
|
|
|
|
|
|
/* stereo volumes for tas3004 */
|
|
|
|
enum {
|
|
|
|
VOL_IDX_PCM, VOL_IDX_PCM2, VOL_IDX_ADC,
|
|
|
|
VOL_IDX_LAST_MIX
|
|
|
|
};
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_gpio {
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int addr;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
u8 active_val;
|
|
|
|
u8 inactive_val;
|
|
|
|
u8 active_state;
|
2005-11-17 14:09:46 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct pmac_tumbler {
|
|
|
|
struct pmac_keywest i2c;
|
|
|
|
struct pmac_gpio audio_reset;
|
|
|
|
struct pmac_gpio amp_mute;
|
|
|
|
struct pmac_gpio line_mute;
|
|
|
|
struct pmac_gpio line_detect;
|
|
|
|
struct pmac_gpio hp_mute;
|
|
|
|
struct pmac_gpio hp_detect;
|
2005-04-16 22:20:36 +00:00
|
|
|
int headphone_irq;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
int lineout_irq;
|
2005-05-01 15:58:43 +00:00
|
|
|
unsigned int save_master_vol[2];
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int master_vol[2];
|
2005-04-16 22:24:32 +00:00
|
|
|
unsigned int save_master_switch[2];
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int master_switch[2];
|
|
|
|
unsigned int mono_vol[VOL_IDX_LAST_MONO];
|
|
|
|
unsigned int mix_vol[VOL_IDX_LAST_MIX][2]; /* stereo volumes for tas3004 */
|
|
|
|
int drc_range;
|
|
|
|
int drc_enable;
|
|
|
|
int capture_source;
|
2005-04-16 22:24:32 +00:00
|
|
|
int anded_reset;
|
|
|
|
int auto_mute_notify;
|
|
|
|
int reset_on_sleep;
|
|
|
|
u8 acs;
|
2005-11-17 14:09:46 +00:00
|
|
|
};
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
*/
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int send_init_client(struct pmac_keywest *i2c, unsigned int *regs)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
while (*regs > 0) {
|
|
|
|
int err, count = 10;
|
|
|
|
do {
|
|
|
|
err = i2c_smbus_write_byte_data(i2c->client,
|
|
|
|
regs[0], regs[1]);
|
|
|
|
if (err >= 0)
|
|
|
|
break;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
DBG("(W) i2c error %d\n", err);
|
2005-04-16 22:20:36 +00:00
|
|
|
mdelay(10);
|
|
|
|
} while (count--);
|
|
|
|
if (err < 0)
|
|
|
|
return -ENXIO;
|
|
|
|
regs += 2;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_init_client(struct pmac_keywest *i2c)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
static unsigned int regs[] = {
|
|
|
|
/* normal operation, SCLK=64fps, i2s output, i2s input, 16bit width */
|
|
|
|
TAS_REG_MCS, (1<<6)|(2<<4)|(2<<2)|0,
|
|
|
|
0, /* terminator */
|
|
|
|
};
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
DBG("(I) tumbler init client\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
return send_init_client(i2c, regs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_init_client(struct pmac_keywest *i2c)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
static unsigned int regs[] = {
|
|
|
|
/* normal operation, SCLK=64fps, i2s output, 16bit width */
|
|
|
|
TAS_REG_MCS, (1<<6)|(2<<4)|0,
|
|
|
|
/* normal operation, all-pass mode */
|
|
|
|
TAS_REG_MCS2, (1<<1),
|
|
|
|
/* normal output, no deemphasis, A input, power-up, line-in */
|
|
|
|
TAS_REG_ACS, 0,
|
|
|
|
0, /* terminator */
|
|
|
|
};
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
DBG("(I) snapper init client\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
return send_init_client(i2c, regs);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* gpio access
|
|
|
|
*/
|
|
|
|
#define do_gpio_write(gp, val) \
|
|
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, (gp)->addr, val)
|
|
|
|
#define do_gpio_read(gp) \
|
|
|
|
pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, (gp)->addr, 0)
|
|
|
|
#define tumbler_gpio_free(gp) /* NOP */
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static void write_audio_gpio(struct pmac_gpio *gp, int active)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
if (! gp->addr)
|
|
|
|
return;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
active = active ? gp->active_val : gp->inactive_val;
|
|
|
|
do_gpio_write(gp, active);
|
|
|
|
DBG("(I) gpio %x write %d\n", gp->addr, active);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int check_audio_gpio(struct pmac_gpio *gp)
|
2005-05-01 15:58:43 +00:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (! gp->addr)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
ret = do_gpio_read(gp);
|
|
|
|
|
2006-09-01 15:15:36 +00:00
|
|
|
return (ret & 0x1) == (gp->active_val & 0x1);
|
2005-05-01 15:58:43 +00:00
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int read_audio_gpio(struct pmac_gpio *gp)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
if (! gp->addr)
|
|
|
|
return 0;
|
2006-09-01 15:15:36 +00:00
|
|
|
ret = do_gpio_read(gp);
|
|
|
|
ret = (ret & 0x02) !=0;
|
2005-04-16 22:20:36 +00:00
|
|
|
return ret == gp->active_state;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* update master volume
|
|
|
|
*/
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_set_master_volume(struct pmac_tumbler *mix)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
unsigned char block[6];
|
|
|
|
unsigned int left_vol, right_vol;
|
|
|
|
|
|
|
|
if (! mix->i2c.client)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
if (! mix->master_switch[0])
|
|
|
|
left_vol = 0;
|
|
|
|
else {
|
|
|
|
left_vol = mix->master_vol[0];
|
|
|
|
if (left_vol >= ARRAY_SIZE(master_volume_table))
|
|
|
|
left_vol = ARRAY_SIZE(master_volume_table) - 1;
|
|
|
|
left_vol = master_volume_table[left_vol];
|
|
|
|
}
|
|
|
|
if (! mix->master_switch[1])
|
|
|
|
right_vol = 0;
|
|
|
|
else {
|
|
|
|
right_vol = mix->master_vol[1];
|
|
|
|
if (right_vol >= ARRAY_SIZE(master_volume_table))
|
|
|
|
right_vol = ARRAY_SIZE(master_volume_table) - 1;
|
|
|
|
right_vol = master_volume_table[right_vol];
|
|
|
|
}
|
|
|
|
|
|
|
|
block[0] = (left_vol >> 16) & 0xff;
|
|
|
|
block[1] = (left_vol >> 8) & 0xff;
|
|
|
|
block[2] = (left_vol >> 0) & 0xff;
|
|
|
|
|
|
|
|
block[3] = (right_vol >> 16) & 0xff;
|
|
|
|
block[4] = (right_vol >> 8) & 0xff;
|
|
|
|
block[5] = (right_vol >> 0) & 0xff;
|
|
|
|
|
2006-02-08 04:04:18 +00:00
|
|
|
if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_VOL, 6,
|
|
|
|
block) < 0) {
|
2009-02-05 15:02:46 +00:00
|
|
|
snd_printk(KERN_ERR "failed to set volume \n");
|
2005-04-16 22:20:36 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* output volume */
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_info_master_volume(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_info *uinfo)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
|
|
uinfo->count = 2;
|
|
|
|
uinfo->value.integer.min = 0;
|
|
|
|
uinfo->value.integer.max = ARRAY_SIZE(master_volume_table) - 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_get_master_volume(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2008-08-08 15:12:47 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
ucontrol->value.integer.value[0] = mix->master_vol[0];
|
|
|
|
ucontrol->value.integer.value[1] = mix->master_vol[1];
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_put_master_volume(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2007-11-15 15:14:12 +00:00
|
|
|
unsigned int vol[2];
|
2005-04-16 22:20:36 +00:00
|
|
|
int change;
|
|
|
|
|
2007-11-15 15:14:12 +00:00
|
|
|
vol[0] = ucontrol->value.integer.value[0];
|
|
|
|
vol[1] = ucontrol->value.integer.value[1];
|
|
|
|
if (vol[0] >= ARRAY_SIZE(master_volume_table) ||
|
|
|
|
vol[1] >= ARRAY_SIZE(master_volume_table))
|
|
|
|
return -EINVAL;
|
|
|
|
change = mix->master_vol[0] != vol[0] ||
|
|
|
|
mix->master_vol[1] != vol[1];
|
2005-04-16 22:20:36 +00:00
|
|
|
if (change) {
|
2007-11-15 15:14:12 +00:00
|
|
|
mix->master_vol[0] = vol[0];
|
|
|
|
mix->master_vol[1] = vol[1];
|
2005-04-16 22:20:36 +00:00
|
|
|
tumbler_set_master_volume(mix);
|
|
|
|
}
|
|
|
|
return change;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* output switch */
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_get_master_switch(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2008-08-08 15:12:47 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
ucontrol->value.integer.value[0] = mix->master_switch[0];
|
|
|
|
ucontrol->value.integer.value[1] = mix->master_switch[1];
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_put_master_switch(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2005-04-16 22:20:36 +00:00
|
|
|
int change;
|
|
|
|
|
|
|
|
change = mix->master_switch[0] != ucontrol->value.integer.value[0] ||
|
|
|
|
mix->master_switch[1] != ucontrol->value.integer.value[1];
|
|
|
|
if (change) {
|
|
|
|
mix->master_switch[0] = !!ucontrol->value.integer.value[0];
|
|
|
|
mix->master_switch[1] = !!ucontrol->value.integer.value[1];
|
|
|
|
tumbler_set_master_volume(mix);
|
|
|
|
}
|
|
|
|
return change;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TAS3001c dynamic range compression
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define TAS3001_DRC_MAX 0x5f
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_set_drc(struct pmac_tumbler *mix)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
unsigned char val[2];
|
|
|
|
|
|
|
|
if (! mix->i2c.client)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
if (mix->drc_enable) {
|
|
|
|
val[0] = 0xc1; /* enable, 3:1 compression */
|
|
|
|
if (mix->drc_range > TAS3001_DRC_MAX)
|
|
|
|
val[1] = 0xf0;
|
|
|
|
else if (mix->drc_range < 0)
|
|
|
|
val[1] = 0x91;
|
|
|
|
else
|
|
|
|
val[1] = mix->drc_range + 0x91;
|
|
|
|
} else {
|
|
|
|
val[0] = 0;
|
|
|
|
val[1] = 0;
|
|
|
|
}
|
|
|
|
|
2006-02-08 04:04:18 +00:00
|
|
|
if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_DRC,
|
|
|
|
2, val) < 0) {
|
2009-02-05 15:02:46 +00:00
|
|
|
snd_printk(KERN_ERR "failed to set DRC\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TAS3004
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define TAS3004_DRC_MAX 0xef
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_set_drc(struct pmac_tumbler *mix)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
unsigned char val[6];
|
|
|
|
|
|
|
|
if (! mix->i2c.client)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
if (mix->drc_enable)
|
|
|
|
val[0] = 0x50; /* 3:1 above threshold */
|
|
|
|
else
|
|
|
|
val[0] = 0x51; /* disabled */
|
|
|
|
val[1] = 0x02; /* 1:1 below threshold */
|
|
|
|
if (mix->drc_range > 0xef)
|
|
|
|
val[2] = 0xef;
|
|
|
|
else if (mix->drc_range < 0)
|
|
|
|
val[2] = 0x00;
|
|
|
|
else
|
|
|
|
val[2] = mix->drc_range;
|
|
|
|
val[3] = 0xb0;
|
|
|
|
val[4] = 0x60;
|
|
|
|
val[5] = 0xa0;
|
|
|
|
|
2006-02-08 04:04:18 +00:00
|
|
|
if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_DRC,
|
|
|
|
6, val) < 0) {
|
2009-02-05 15:02:46 +00:00
|
|
|
snd_printk(KERN_ERR "failed to set DRC\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_info_drc_value(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_info *uinfo)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
2005-04-16 22:20:36 +00:00
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
|
|
uinfo->count = 1;
|
|
|
|
uinfo->value.integer.min = 0;
|
|
|
|
uinfo->value.integer.max =
|
|
|
|
chip->model == PMAC_TUMBLER ? TAS3001_DRC_MAX : TAS3004_DRC_MAX;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_get_drc_value(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (! (mix = chip->mixer_data))
|
|
|
|
return -ENODEV;
|
|
|
|
ucontrol->value.integer.value[0] = mix->drc_range;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_put_drc_value(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix;
|
2007-11-15 15:14:12 +00:00
|
|
|
unsigned int val;
|
2005-04-16 22:20:36 +00:00
|
|
|
int change;
|
|
|
|
|
|
|
|
if (! (mix = chip->mixer_data))
|
|
|
|
return -ENODEV;
|
2007-11-15 15:14:12 +00:00
|
|
|
val = ucontrol->value.integer.value[0];
|
|
|
|
if (chip->model == PMAC_TUMBLER) {
|
|
|
|
if (val > TAS3001_DRC_MAX)
|
|
|
|
return -EINVAL;
|
|
|
|
} else {
|
|
|
|
if (val > TAS3004_DRC_MAX)
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
change = mix->drc_range != val;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (change) {
|
2007-11-15 15:14:12 +00:00
|
|
|
mix->drc_range = val;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (chip->model == PMAC_TUMBLER)
|
|
|
|
tumbler_set_drc(mix);
|
|
|
|
else
|
|
|
|
snapper_set_drc(mix);
|
|
|
|
}
|
|
|
|
return change;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_get_drc_switch(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (! (mix = chip->mixer_data))
|
|
|
|
return -ENODEV;
|
|
|
|
ucontrol->value.integer.value[0] = mix->drc_enable;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_put_drc_switch(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix;
|
2005-04-16 22:20:36 +00:00
|
|
|
int change;
|
|
|
|
|
|
|
|
if (! (mix = chip->mixer_data))
|
|
|
|
return -ENODEV;
|
|
|
|
change = mix->drc_enable != ucontrol->value.integer.value[0];
|
|
|
|
if (change) {
|
|
|
|
mix->drc_enable = !!ucontrol->value.integer.value[0];
|
|
|
|
if (chip->model == PMAC_TUMBLER)
|
|
|
|
tumbler_set_drc(mix);
|
|
|
|
else
|
|
|
|
snapper_set_drc(mix);
|
|
|
|
}
|
|
|
|
return change;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mono volumes
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct tumbler_mono_vol {
|
|
|
|
int index;
|
|
|
|
int reg;
|
|
|
|
int bytes;
|
|
|
|
unsigned int max;
|
|
|
|
unsigned int *table;
|
|
|
|
};
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_set_mono_volume(struct pmac_tumbler *mix,
|
|
|
|
struct tumbler_mono_vol *info)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
unsigned char block[4];
|
|
|
|
unsigned int vol;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (! mix->i2c.client)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
vol = mix->mono_vol[info->index];
|
|
|
|
if (vol >= info->max)
|
|
|
|
vol = info->max - 1;
|
|
|
|
vol = info->table[vol];
|
|
|
|
for (i = 0; i < info->bytes; i++)
|
|
|
|
block[i] = (vol >> ((info->bytes - i - 1) * 8)) & 0xff;
|
2006-02-08 04:04:18 +00:00
|
|
|
if (i2c_smbus_write_i2c_block_data(mix->i2c.client, info->reg,
|
|
|
|
info->bytes, block) < 0) {
|
2009-02-05 15:02:46 +00:00
|
|
|
snd_printk(KERN_ERR "failed to set mono volume %d\n",
|
|
|
|
info->index);
|
2005-04-16 22:20:36 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_info_mono(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_info *uinfo)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct tumbler_mono_vol *info = (struct tumbler_mono_vol *)kcontrol->private_value;
|
|
|
|
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
|
|
uinfo->count = 1;
|
|
|
|
uinfo->value.integer.min = 0;
|
|
|
|
uinfo->value.integer.max = info->max - 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_get_mono(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct tumbler_mono_vol *info = (struct tumbler_mono_vol *)kcontrol->private_value;
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (! (mix = chip->mixer_data))
|
|
|
|
return -ENODEV;
|
|
|
|
ucontrol->value.integer.value[0] = mix->mono_vol[info->index];
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_put_mono(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct tumbler_mono_vol *info = (struct tumbler_mono_vol *)kcontrol->private_value;
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix;
|
2007-11-15 15:14:12 +00:00
|
|
|
unsigned int vol;
|
2005-04-16 22:20:36 +00:00
|
|
|
int change;
|
|
|
|
|
|
|
|
if (! (mix = chip->mixer_data))
|
|
|
|
return -ENODEV;
|
2007-11-15 15:14:12 +00:00
|
|
|
vol = ucontrol->value.integer.value[0];
|
|
|
|
if (vol >= info->max)
|
|
|
|
return -EINVAL;
|
|
|
|
change = mix->mono_vol[info->index] != vol;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (change) {
|
2007-11-15 15:14:12 +00:00
|
|
|
mix->mono_vol[info->index] = vol;
|
2005-04-16 22:20:36 +00:00
|
|
|
tumbler_set_mono_volume(mix, info);
|
|
|
|
}
|
|
|
|
return change;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* TAS3001c mono volumes */
|
|
|
|
static struct tumbler_mono_vol tumbler_pcm_vol_info = {
|
|
|
|
.index = VOL_IDX_PCM_MONO,
|
|
|
|
.reg = TAS_REG_PCM,
|
|
|
|
.bytes = 3,
|
|
|
|
.max = ARRAY_SIZE(mixer_volume_table),
|
|
|
|
.table = mixer_volume_table,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct tumbler_mono_vol tumbler_bass_vol_info = {
|
|
|
|
.index = VOL_IDX_BASS,
|
|
|
|
.reg = TAS_REG_BASS,
|
|
|
|
.bytes = 1,
|
|
|
|
.max = ARRAY_SIZE(bass_volume_table),
|
|
|
|
.table = bass_volume_table,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct tumbler_mono_vol tumbler_treble_vol_info = {
|
|
|
|
.index = VOL_IDX_TREBLE,
|
|
|
|
.reg = TAS_REG_TREBLE,
|
|
|
|
.bytes = 1,
|
|
|
|
.max = ARRAY_SIZE(treble_volume_table),
|
|
|
|
.table = treble_volume_table,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* TAS3004 mono volumes */
|
|
|
|
static struct tumbler_mono_vol snapper_bass_vol_info = {
|
|
|
|
.index = VOL_IDX_BASS,
|
|
|
|
.reg = TAS_REG_BASS,
|
|
|
|
.bytes = 1,
|
|
|
|
.max = ARRAY_SIZE(snapper_bass_volume_table),
|
|
|
|
.table = snapper_bass_volume_table,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct tumbler_mono_vol snapper_treble_vol_info = {
|
|
|
|
.index = VOL_IDX_TREBLE,
|
|
|
|
.reg = TAS_REG_TREBLE,
|
|
|
|
.bytes = 1,
|
|
|
|
.max = ARRAY_SIZE(snapper_treble_volume_table),
|
|
|
|
.table = snapper_treble_volume_table,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
#define DEFINE_MONO(xname,type) { \
|
|
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\
|
|
|
|
.name = xname, \
|
|
|
|
.info = tumbler_info_mono, \
|
|
|
|
.get = tumbler_get_mono, \
|
|
|
|
.put = tumbler_put_mono, \
|
|
|
|
.private_value = (unsigned long)(&tumbler_##type##_vol_info), \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define DEFINE_SNAPPER_MONO(xname,type) { \
|
|
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\
|
|
|
|
.name = xname, \
|
|
|
|
.info = tumbler_info_mono, \
|
|
|
|
.get = tumbler_get_mono, \
|
|
|
|
.put = tumbler_put_mono, \
|
|
|
|
.private_value = (unsigned long)(&snapper_##type##_vol_info), \
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* snapper mixer volumes
|
|
|
|
*/
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_set_mix_vol1(struct pmac_tumbler *mix, int idx, int ch, int reg)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
int i, j, vol;
|
|
|
|
unsigned char block[9];
|
|
|
|
|
|
|
|
vol = mix->mix_vol[idx][ch];
|
|
|
|
if (vol >= ARRAY_SIZE(mixer_volume_table)) {
|
|
|
|
vol = ARRAY_SIZE(mixer_volume_table) - 1;
|
|
|
|
mix->mix_vol[idx][ch] = vol;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
|
|
vol = mix->mix_vol[i][ch];
|
|
|
|
vol = mixer_volume_table[vol];
|
|
|
|
for (j = 0; j < 3; j++)
|
|
|
|
block[i * 3 + j] = (vol >> ((2 - j) * 8)) & 0xff;
|
|
|
|
}
|
2006-02-08 04:04:18 +00:00
|
|
|
if (i2c_smbus_write_i2c_block_data(mix->i2c.client, reg,
|
|
|
|
9, block) < 0) {
|
2009-02-05 15:02:46 +00:00
|
|
|
snd_printk(KERN_ERR "failed to set mono volume %d\n", reg);
|
2005-04-16 22:20:36 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_set_mix_vol(struct pmac_tumbler *mix, int idx)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
if (! mix->i2c.client)
|
|
|
|
return -ENODEV;
|
|
|
|
if (snapper_set_mix_vol1(mix, idx, 0, TAS_REG_LMIX) < 0 ||
|
|
|
|
snapper_set_mix_vol1(mix, idx, 1, TAS_REG_RMIX) < 0)
|
|
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_info_mix(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_info *uinfo)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
|
|
uinfo->count = 2;
|
|
|
|
uinfo->value.integer.min = 0;
|
|
|
|
uinfo->value.integer.max = ARRAY_SIZE(mixer_volume_table) - 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_get_mix(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
int idx = (int)kcontrol->private_value;
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (! (mix = chip->mixer_data))
|
|
|
|
return -ENODEV;
|
|
|
|
ucontrol->value.integer.value[0] = mix->mix_vol[idx][0];
|
|
|
|
ucontrol->value.integer.value[1] = mix->mix_vol[idx][1];
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_put_mix(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
int idx = (int)kcontrol->private_value;
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix;
|
2007-11-15 15:14:12 +00:00
|
|
|
unsigned int vol[2];
|
2005-04-16 22:20:36 +00:00
|
|
|
int change;
|
|
|
|
|
|
|
|
if (! (mix = chip->mixer_data))
|
|
|
|
return -ENODEV;
|
2007-11-15 15:14:12 +00:00
|
|
|
vol[0] = ucontrol->value.integer.value[0];
|
|
|
|
vol[1] = ucontrol->value.integer.value[1];
|
|
|
|
if (vol[0] >= ARRAY_SIZE(mixer_volume_table) ||
|
|
|
|
vol[1] >= ARRAY_SIZE(mixer_volume_table))
|
|
|
|
return -EINVAL;
|
|
|
|
change = mix->mix_vol[idx][0] != vol[0] ||
|
|
|
|
mix->mix_vol[idx][1] != vol[1];
|
2005-04-16 22:20:36 +00:00
|
|
|
if (change) {
|
2007-11-15 15:14:12 +00:00
|
|
|
mix->mix_vol[idx][0] = vol[0];
|
|
|
|
mix->mix_vol[idx][1] = vol[1];
|
2005-04-16 22:20:36 +00:00
|
|
|
snapper_set_mix_vol(mix, idx);
|
|
|
|
}
|
|
|
|
return change;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
2005-04-16 22:24:32 +00:00
|
|
|
* mute switches. FIXME: Turn that into software mute when both outputs are muted
|
|
|
|
* to avoid codec reset on ibook M7
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
enum { TUMBLER_MUTE_HP, TUMBLER_MUTE_AMP, TUMBLER_MUTE_LINE };
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_get_mute_switch(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix;
|
|
|
|
struct pmac_gpio *gp;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (! (mix = chip->mixer_data))
|
|
|
|
return -ENODEV;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
switch(kcontrol->private_value) {
|
|
|
|
case TUMBLER_MUTE_HP:
|
|
|
|
gp = &mix->hp_mute; break;
|
|
|
|
case TUMBLER_MUTE_AMP:
|
|
|
|
gp = &mix->amp_mute; break;
|
|
|
|
case TUMBLER_MUTE_LINE:
|
|
|
|
gp = &mix->line_mute; break;
|
|
|
|
default:
|
|
|
|
gp = NULL;
|
|
|
|
}
|
|
|
|
if (gp == NULL)
|
|
|
|
return -EINVAL;
|
2005-05-01 15:58:43 +00:00
|
|
|
ucontrol->value.integer.value[0] = !check_audio_gpio(gp);
|
2005-04-16 22:20:36 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_put_mute_switch(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix;
|
|
|
|
struct pmac_gpio *gp;
|
2005-04-16 22:20:36 +00:00
|
|
|
int val;
|
|
|
|
#ifdef PMAC_SUPPORT_AUTOMUTE
|
|
|
|
if (chip->update_automute && chip->auto_mute)
|
|
|
|
return 0; /* don't touch in the auto-mute mode */
|
|
|
|
#endif
|
|
|
|
if (! (mix = chip->mixer_data))
|
|
|
|
return -ENODEV;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
switch(kcontrol->private_value) {
|
|
|
|
case TUMBLER_MUTE_HP:
|
|
|
|
gp = &mix->hp_mute; break;
|
|
|
|
case TUMBLER_MUTE_AMP:
|
|
|
|
gp = &mix->amp_mute; break;
|
|
|
|
case TUMBLER_MUTE_LINE:
|
|
|
|
gp = &mix->line_mute; break;
|
|
|
|
default:
|
|
|
|
gp = NULL;
|
|
|
|
}
|
|
|
|
if (gp == NULL)
|
|
|
|
return -EINVAL;
|
2005-05-01 15:58:43 +00:00
|
|
|
val = ! check_audio_gpio(gp);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (val != ucontrol->value.integer.value[0]) {
|
|
|
|
write_audio_gpio(gp, ! ucontrol->value.integer.value[0]);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_set_capture_source(struct pmac_tumbler *mix)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
if (! mix->i2c.client)
|
|
|
|
return -ENODEV;
|
2005-04-16 22:24:32 +00:00
|
|
|
if (mix->capture_source)
|
|
|
|
mix->acs = mix->acs |= 2;
|
|
|
|
else
|
|
|
|
mix->acs &= ~2;
|
|
|
|
return i2c_smbus_write_byte_data(mix->i2c.client, TAS_REG_ACS, mix->acs);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_info_capture_source(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_info *uinfo)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
static char *texts[2] = {
|
|
|
|
"Line", "Mic"
|
|
|
|
};
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
|
|
uinfo->count = 1;
|
|
|
|
uinfo->value.enumerated.items = 2;
|
|
|
|
if (uinfo->value.enumerated.item > 1)
|
|
|
|
uinfo->value.enumerated.item = 1;
|
|
|
|
strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_get_capture_source(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-11-20 14:12:33 +00:00
|
|
|
ucontrol->value.enumerated.item[0] = mix->capture_source;
|
2005-04-16 22:20:36 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int snapper_put_capture_source(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2005-04-16 22:20:36 +00:00
|
|
|
int change;
|
|
|
|
|
2007-11-20 14:12:33 +00:00
|
|
|
change = ucontrol->value.enumerated.item[0] != mix->capture_source;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (change) {
|
2007-11-15 15:14:12 +00:00
|
|
|
mix->capture_source = !!ucontrol->value.enumerated.item[0];
|
2005-04-16 22:20:36 +00:00
|
|
|
snapper_set_capture_source(mix);
|
|
|
|
}
|
|
|
|
return change;
|
|
|
|
}
|
|
|
|
|
|
|
|
#define DEFINE_SNAPPER_MIX(xname,idx,ofs) { \
|
|
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\
|
|
|
|
.name = xname, \
|
|
|
|
.info = snapper_info_mix, \
|
|
|
|
.get = snapper_get_mix, \
|
|
|
|
.put = snapper_put_mix, \
|
|
|
|
.index = idx,\
|
|
|
|
.private_value = ofs, \
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
*/
|
2009-06-03 06:13:15 +00:00
|
|
|
static struct snd_kcontrol_new tumbler_mixers[] __devinitdata = {
|
2005-04-16 22:20:36 +00:00
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Master Playback Volume",
|
|
|
|
.info = tumbler_info_master_volume,
|
|
|
|
.get = tumbler_get_master_volume,
|
|
|
|
.put = tumbler_put_master_volume
|
|
|
|
},
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Master Playback Switch",
|
|
|
|
.info = snd_pmac_boolean_stereo_info,
|
|
|
|
.get = tumbler_get_master_switch,
|
|
|
|
.put = tumbler_put_master_switch
|
|
|
|
},
|
|
|
|
DEFINE_MONO("Tone Control - Bass", bass),
|
|
|
|
DEFINE_MONO("Tone Control - Treble", treble),
|
|
|
|
DEFINE_MONO("PCM Playback Volume", pcm),
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "DRC Range",
|
|
|
|
.info = tumbler_info_drc_value,
|
|
|
|
.get = tumbler_get_drc_value,
|
|
|
|
.put = tumbler_put_drc_value
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2009-06-03 06:13:15 +00:00
|
|
|
static struct snd_kcontrol_new snapper_mixers[] __devinitdata = {
|
2005-04-16 22:20:36 +00:00
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Master Playback Volume",
|
|
|
|
.info = tumbler_info_master_volume,
|
|
|
|
.get = tumbler_get_master_volume,
|
|
|
|
.put = tumbler_put_master_volume
|
|
|
|
},
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Master Playback Switch",
|
|
|
|
.info = snd_pmac_boolean_stereo_info,
|
|
|
|
.get = tumbler_get_master_switch,
|
|
|
|
.put = tumbler_put_master_switch
|
|
|
|
},
|
|
|
|
DEFINE_SNAPPER_MIX("PCM Playback Volume", 0, VOL_IDX_PCM),
|
2008-11-12 14:18:41 +00:00
|
|
|
/* Alternative PCM is assigned to Mic analog loopback on iBook G4 */
|
|
|
|
DEFINE_SNAPPER_MIX("Mic Playback Volume", 0, VOL_IDX_PCM2),
|
2005-04-16 22:20:36 +00:00
|
|
|
DEFINE_SNAPPER_MIX("Monitor Mix Volume", 0, VOL_IDX_ADC),
|
|
|
|
DEFINE_SNAPPER_MONO("Tone Control - Bass", bass),
|
|
|
|
DEFINE_SNAPPER_MONO("Tone Control - Treble", treble),
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "DRC Range",
|
|
|
|
.info = tumbler_info_drc_value,
|
|
|
|
.get = tumbler_get_drc_value,
|
|
|
|
.put = tumbler_put_drc_value
|
|
|
|
},
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Input Source", /* FIXME: "Capture Source" doesn't work properly */
|
|
|
|
.info = snapper_info_capture_source,
|
|
|
|
.get = snapper_get_capture_source,
|
|
|
|
.put = snapper_put_capture_source
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2009-06-03 06:13:15 +00:00
|
|
|
static struct snd_kcontrol_new tumbler_hp_sw __devinitdata = {
|
2005-04-16 22:20:36 +00:00
|
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Headphone Playback Switch",
|
|
|
|
.info = snd_pmac_boolean_mono_info,
|
|
|
|
.get = tumbler_get_mute_switch,
|
|
|
|
.put = tumbler_put_mute_switch,
|
|
|
|
.private_value = TUMBLER_MUTE_HP,
|
|
|
|
};
|
2009-06-03 06:13:15 +00:00
|
|
|
static struct snd_kcontrol_new tumbler_speaker_sw __devinitdata = {
|
2005-04-16 22:20:36 +00:00
|
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "PC Speaker Playback Switch",
|
|
|
|
.info = snd_pmac_boolean_mono_info,
|
|
|
|
.get = tumbler_get_mute_switch,
|
|
|
|
.put = tumbler_put_mute_switch,
|
|
|
|
.private_value = TUMBLER_MUTE_AMP,
|
|
|
|
};
|
2009-06-03 06:13:15 +00:00
|
|
|
static struct snd_kcontrol_new tumbler_lineout_sw __devinitdata = {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Line Out Playback Switch",
|
|
|
|
.info = snd_pmac_boolean_mono_info,
|
|
|
|
.get = tumbler_get_mute_switch,
|
|
|
|
.put = tumbler_put_mute_switch,
|
|
|
|
.private_value = TUMBLER_MUTE_LINE,
|
|
|
|
};
|
2009-06-03 06:13:15 +00:00
|
|
|
static struct snd_kcontrol_new tumbler_drc_sw __devinitdata = {
|
2005-04-16 22:20:36 +00:00
|
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "DRC Switch",
|
|
|
|
.info = snd_pmac_boolean_mono_info,
|
|
|
|
.get = tumbler_get_drc_switch,
|
|
|
|
.put = tumbler_put_drc_switch
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef PMAC_SUPPORT_AUTOMUTE
|
|
|
|
/*
|
|
|
|
* auto-mute stuffs
|
|
|
|
*/
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_detect_headphone(struct snd_pmac *chip)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
int detect = 0;
|
|
|
|
|
|
|
|
if (mix->hp_detect.addr)
|
|
|
|
detect |= read_audio_gpio(&mix->hp_detect);
|
|
|
|
return detect;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static int tumbler_detect_lineout(struct snd_pmac *chip)
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
int detect = 0;
|
|
|
|
|
|
|
|
if (mix->line_detect.addr)
|
|
|
|
detect |= read_audio_gpio(&mix->line_detect);
|
|
|
|
return detect;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static void check_mute(struct snd_pmac *chip, struct pmac_gpio *gp, int val, int do_notify,
|
|
|
|
struct snd_kcontrol *sw)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-05-01 15:58:43 +00:00
|
|
|
if (check_audio_gpio(gp) != val) {
|
2005-04-16 22:20:36 +00:00
|
|
|
write_audio_gpio(gp, val);
|
|
|
|
if (do_notify)
|
2005-05-01 15:58:43 +00:00
|
|
|
snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
|
|
|
|
&sw->id);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct work_struct device_change;
|
2006-11-22 14:57:56 +00:00
|
|
|
static struct snd_pmac *device_change_chip;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2006-11-22 14:57:56 +00:00
|
|
|
static void device_change_handler(struct work_struct *work)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2006-11-22 14:57:56 +00:00
|
|
|
struct snd_pmac *chip = device_change_chip;
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_tumbler *mix;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
int headphone, lineout;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (!chip)
|
|
|
|
return;
|
|
|
|
|
|
|
|
mix = chip->mixer_data;
|
2008-08-08 15:12:47 +00:00
|
|
|
if (snd_BUG_ON(!mix))
|
|
|
|
return;
|
2005-04-16 22:24:32 +00:00
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
headphone = tumbler_detect_headphone(chip);
|
|
|
|
lineout = tumbler_detect_lineout(chip);
|
|
|
|
|
|
|
|
DBG("headphone: %d, lineout: %d\n", headphone, lineout);
|
|
|
|
|
|
|
|
if (headphone || lineout) {
|
|
|
|
/* unmute headphone/lineout & mute speaker */
|
|
|
|
if (headphone)
|
|
|
|
check_mute(chip, &mix->hp_mute, 0, mix->auto_mute_notify,
|
|
|
|
chip->master_sw_ctl);
|
|
|
|
if (lineout && mix->line_mute.addr != 0)
|
|
|
|
check_mute(chip, &mix->line_mute, 0, mix->auto_mute_notify,
|
|
|
|
chip->lineout_sw_ctl);
|
2005-04-16 22:24:32 +00:00
|
|
|
if (mix->anded_reset)
|
2005-07-09 08:53:24 +00:00
|
|
|
msleep(10);
|
2005-04-16 22:24:32 +00:00
|
|
|
check_mute(chip, &mix->amp_mute, 1, mix->auto_mute_notify,
|
|
|
|
chip->speaker_sw_ctl);
|
|
|
|
} else {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
/* unmute speaker, mute others */
|
2005-04-16 22:24:32 +00:00
|
|
|
check_mute(chip, &mix->amp_mute, 0, mix->auto_mute_notify,
|
|
|
|
chip->speaker_sw_ctl);
|
|
|
|
if (mix->anded_reset)
|
2005-07-09 08:53:24 +00:00
|
|
|
msleep(10);
|
2005-04-16 22:24:32 +00:00
|
|
|
check_mute(chip, &mix->hp_mute, 1, mix->auto_mute_notify,
|
|
|
|
chip->master_sw_ctl);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
if (mix->line_mute.addr != 0)
|
|
|
|
check_mute(chip, &mix->line_mute, 1, mix->auto_mute_notify,
|
|
|
|
chip->lineout_sw_ctl);
|
2005-04-16 22:24:32 +00:00
|
|
|
}
|
2005-09-07 15:08:40 +00:00
|
|
|
if (mix->auto_mute_notify)
|
2005-04-16 22:24:32 +00:00
|
|
|
snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
|
|
|
|
&chip->hp_detect_ctl->id);
|
2005-09-07 15:08:40 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_SND_POWERMAC_AUTO_DRC
|
|
|
|
mix->drc_enable = ! (headphone || lineout);
|
|
|
|
if (mix->auto_mute_notify)
|
2005-04-16 22:24:32 +00:00
|
|
|
snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
|
|
|
|
&chip->drc_sw_ctl->id);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (chip->model == PMAC_TUMBLER)
|
|
|
|
tumbler_set_drc(mix);
|
|
|
|
else
|
|
|
|
snapper_set_drc(mix);
|
2005-09-07 15:08:40 +00:00
|
|
|
#endif
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* reset the master volume so the correct amplification is applied */
|
|
|
|
tumbler_set_master_volume(mix);
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static void tumbler_update_automute(struct snd_pmac *chip, int do_notify)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
if (chip->auto_mute) {
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_tumbler *mix;
|
2005-04-16 22:24:32 +00:00
|
|
|
mix = chip->mixer_data;
|
2008-08-08 15:12:47 +00:00
|
|
|
if (snd_BUG_ON(!mix))
|
|
|
|
return;
|
2005-04-16 22:24:32 +00:00
|
|
|
mix->auto_mute_notify = do_notify;
|
2005-04-16 22:20:36 +00:00
|
|
|
schedule_work(&device_change);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif /* PMAC_SUPPORT_AUTOMUTE */
|
|
|
|
|
|
|
|
|
|
|
|
/* interrupt - headphone plug changed */
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
|
|
|
static irqreturn_t headphone_intr(int irq, void *devid)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct snd_pmac *chip = devid;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (chip->update_automute && chip->initialized) {
|
|
|
|
chip->update_automute(chip, 1);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* look for audio-gpio device */
|
|
|
|
static struct device_node *find_audio_device(const char *name)
|
|
|
|
{
|
2007-04-24 03:53:04 +00:00
|
|
|
struct device_node *gpiop;
|
2005-04-16 22:20:36 +00:00
|
|
|
struct device_node *np;
|
|
|
|
|
2007-04-24 03:53:04 +00:00
|
|
|
gpiop = of_find_node_by_name(NULL, "gpio");
|
|
|
|
if (! gpiop)
|
2005-04-16 22:20:36 +00:00
|
|
|
return NULL;
|
|
|
|
|
2007-04-24 03:53:04 +00:00
|
|
|
for (np = of_get_next_child(gpiop, NULL); np;
|
|
|
|
np = of_get_next_child(gpiop, np)) {
|
2007-04-03 12:39:14 +00:00
|
|
|
const char *property = of_get_property(np, "audio-gpio", NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (property && strcmp(property, name) == 0)
|
2007-04-24 03:53:04 +00:00
|
|
|
break;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2007-04-24 03:53:04 +00:00
|
|
|
of_node_put(gpiop);
|
|
|
|
return np;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* look for audio-gpio device */
|
|
|
|
static struct device_node *find_compatible_audio_device(const char *name)
|
|
|
|
{
|
2007-04-24 03:53:04 +00:00
|
|
|
struct device_node *gpiop;
|
2005-04-16 22:20:36 +00:00
|
|
|
struct device_node *np;
|
|
|
|
|
2007-04-24 03:53:04 +00:00
|
|
|
gpiop = of_find_node_by_name(NULL, "gpio");
|
|
|
|
if (!gpiop)
|
2005-04-16 22:20:36 +00:00
|
|
|
return NULL;
|
|
|
|
|
2007-04-24 03:53:04 +00:00
|
|
|
for (np = of_get_next_child(gpiop, NULL); np;
|
|
|
|
np = of_get_next_child(gpiop, np)) {
|
2007-05-03 07:26:52 +00:00
|
|
|
if (of_device_is_compatible(np, name))
|
2007-04-24 03:53:04 +00:00
|
|
|
break;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2007-04-24 03:53:04 +00:00
|
|
|
of_node_put(gpiop);
|
|
|
|
return np;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* find an audio device and get its address */
|
2005-11-17 14:09:46 +00:00
|
|
|
static long tumbler_find_device(const char *device, const char *platform,
|
|
|
|
struct pmac_gpio *gp, int is_compatible)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct device_node *node;
|
2006-07-12 05:41:18 +00:00
|
|
|
const u32 *base;
|
|
|
|
u32 addr;
|
2007-04-24 03:53:04 +00:00
|
|
|
long ret;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (is_compatible)
|
|
|
|
node = find_compatible_audio_device(device);
|
|
|
|
else
|
|
|
|
node = find_audio_device(device);
|
|
|
|
if (! node) {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
DBG("(W) cannot find audio device %s !\n", device);
|
2005-04-16 22:20:36 +00:00
|
|
|
snd_printdd("cannot find device %s\n", device);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
2007-04-03 12:39:14 +00:00
|
|
|
base = of_get_property(node, "AAPL,address", NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (! base) {
|
2007-04-03 12:39:14 +00:00
|
|
|
base = of_get_property(node, "reg", NULL);
|
2005-04-16 22:24:31 +00:00
|
|
|
if (!base) {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
DBG("(E) cannot find address for device %s !\n", device);
|
2005-04-16 22:24:31 +00:00
|
|
|
snd_printd("cannot find address for device %s\n", device);
|
2007-04-24 03:53:04 +00:00
|
|
|
of_node_put(node);
|
2005-04-16 22:24:31 +00:00
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
addr = *base;
|
|
|
|
if (addr < 0x50)
|
|
|
|
addr += 0x50;
|
|
|
|
} else
|
|
|
|
addr = *base;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-04-16 22:24:31 +00:00
|
|
|
gp->addr = addr & 0x0000ffff;
|
|
|
|
/* Try to find the active state, default to 0 ! */
|
2007-04-03 12:39:14 +00:00
|
|
|
base = of_get_property(node, "audio-gpio-active-state", NULL);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
if (base) {
|
2005-04-16 22:20:36 +00:00
|
|
|
gp->active_state = *base;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
gp->active_val = (*base) ? 0x5 : 0x4;
|
|
|
|
gp->inactive_val = (*base) ? 0x4 : 0x5;
|
|
|
|
} else {
|
2006-07-12 05:41:18 +00:00
|
|
|
const u32 *prop = NULL;
|
2005-04-16 22:24:31 +00:00
|
|
|
gp->active_state = 0;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
gp->active_val = 0x4;
|
|
|
|
gp->inactive_val = 0x5;
|
|
|
|
/* Here are some crude hacks to extract the GPIO polarity and
|
|
|
|
* open collector informations out of the do-platform script
|
|
|
|
* as we don't yet have an interpreter for these things
|
|
|
|
*/
|
|
|
|
if (platform)
|
2007-04-03 12:39:14 +00:00
|
|
|
prop = of_get_property(node, platform, NULL);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
if (prop) {
|
|
|
|
if (prop[3] == 0x9 && prop[4] == 0x9) {
|
|
|
|
gp->active_val = 0xd;
|
|
|
|
gp->inactive_val = 0xc;
|
|
|
|
}
|
|
|
|
if (prop[3] == 0x1 && prop[4] == 0x1) {
|
|
|
|
gp->active_val = 0x5;
|
|
|
|
gp->inactive_val = 0x4;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
DBG("(I) GPIO device %s found, offset: %x, active state: %d !\n",
|
|
|
|
device, gp->addr, gp->active_state);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-04-24 03:53:04 +00:00
|
|
|
ret = irq_of_parse_and_map(node, 0);
|
|
|
|
of_node_put(node);
|
|
|
|
return ret;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* reset audio */
|
2005-11-17 14:09:46 +00:00
|
|
|
static void tumbler_reset_audio(struct snd_pmac *chip)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-04-16 22:24:32 +00:00
|
|
|
if (mix->anded_reset) {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
DBG("(I) codec anded reset !\n");
|
2005-04-16 22:24:32 +00:00
|
|
|
write_audio_gpio(&mix->hp_mute, 0);
|
|
|
|
write_audio_gpio(&mix->amp_mute, 0);
|
2005-07-09 08:53:24 +00:00
|
|
|
msleep(200);
|
2005-04-16 22:24:32 +00:00
|
|
|
write_audio_gpio(&mix->hp_mute, 1);
|
|
|
|
write_audio_gpio(&mix->amp_mute, 1);
|
2005-07-09 08:53:24 +00:00
|
|
|
msleep(100);
|
2005-04-16 22:24:32 +00:00
|
|
|
write_audio_gpio(&mix->hp_mute, 0);
|
|
|
|
write_audio_gpio(&mix->amp_mute, 0);
|
2005-07-09 08:53:24 +00:00
|
|
|
msleep(100);
|
2005-04-16 22:24:32 +00:00
|
|
|
} else {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
DBG("(I) codec normal reset !\n");
|
|
|
|
|
2005-04-16 22:24:32 +00:00
|
|
|
write_audio_gpio(&mix->audio_reset, 0);
|
2005-07-09 08:53:24 +00:00
|
|
|
msleep(200);
|
2005-04-16 22:24:32 +00:00
|
|
|
write_audio_gpio(&mix->audio_reset, 1);
|
2005-07-09 08:53:24 +00:00
|
|
|
msleep(100);
|
2005-04-16 22:24:32 +00:00
|
|
|
write_audio_gpio(&mix->audio_reset, 0);
|
2005-07-09 08:53:24 +00:00
|
|
|
msleep(100);
|
2005-04-16 22:24:32 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2005-06-27 21:36:34 +00:00
|
|
|
#ifdef CONFIG_PM
|
2005-04-16 22:24:32 +00:00
|
|
|
/* suspend mixer */
|
2005-11-17 14:09:46 +00:00
|
|
|
static void tumbler_suspend(struct snd_pmac *chip)
|
2005-04-16 22:24:32 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2005-04-16 22:24:32 +00:00
|
|
|
|
|
|
|
if (mix->headphone_irq >= 0)
|
|
|
|
disable_irq(mix->headphone_irq);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
if (mix->lineout_irq >= 0)
|
|
|
|
disable_irq(mix->lineout_irq);
|
2005-04-16 22:24:32 +00:00
|
|
|
mix->save_master_switch[0] = mix->master_switch[0];
|
|
|
|
mix->save_master_switch[1] = mix->master_switch[1];
|
2005-05-01 15:58:43 +00:00
|
|
|
mix->save_master_vol[0] = mix->master_vol[0];
|
|
|
|
mix->save_master_vol[1] = mix->master_vol[1];
|
2005-04-16 22:24:32 +00:00
|
|
|
mix->master_switch[0] = mix->master_switch[1] = 0;
|
|
|
|
tumbler_set_master_volume(mix);
|
|
|
|
if (!mix->anded_reset) {
|
|
|
|
write_audio_gpio(&mix->amp_mute, 1);
|
|
|
|
write_audio_gpio(&mix->hp_mute, 1);
|
|
|
|
}
|
|
|
|
if (chip->model == PMAC_SNAPPER) {
|
|
|
|
mix->acs |= 1;
|
|
|
|
i2c_smbus_write_byte_data(mix->i2c.client, TAS_REG_ACS, mix->acs);
|
|
|
|
}
|
|
|
|
if (mix->anded_reset) {
|
|
|
|
write_audio_gpio(&mix->amp_mute, 1);
|
|
|
|
write_audio_gpio(&mix->hp_mute, 1);
|
|
|
|
} else
|
|
|
|
write_audio_gpio(&mix->audio_reset, 1);
|
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/* resume mixer */
|
2005-11-17 14:09:46 +00:00
|
|
|
static void tumbler_resume(struct snd_pmac *chip)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-04-16 22:24:32 +00:00
|
|
|
mix->acs &= ~1;
|
|
|
|
mix->master_switch[0] = mix->save_master_switch[0];
|
|
|
|
mix->master_switch[1] = mix->save_master_switch[1];
|
2005-05-01 15:58:43 +00:00
|
|
|
mix->master_vol[0] = mix->save_master_vol[0];
|
|
|
|
mix->master_vol[1] = mix->save_master_vol[1];
|
2005-04-16 22:20:36 +00:00
|
|
|
tumbler_reset_audio(chip);
|
|
|
|
if (mix->i2c.client && mix->i2c.init_client) {
|
|
|
|
if (mix->i2c.init_client(&mix->i2c) < 0)
|
|
|
|
printk(KERN_ERR "tumbler_init_client error\n");
|
|
|
|
} else
|
|
|
|
printk(KERN_ERR "tumbler: i2c is not initialized\n");
|
|
|
|
if (chip->model == PMAC_TUMBLER) {
|
|
|
|
tumbler_set_mono_volume(mix, &tumbler_pcm_vol_info);
|
|
|
|
tumbler_set_mono_volume(mix, &tumbler_bass_vol_info);
|
|
|
|
tumbler_set_mono_volume(mix, &tumbler_treble_vol_info);
|
|
|
|
tumbler_set_drc(mix);
|
|
|
|
} else {
|
|
|
|
snapper_set_mix_vol(mix, VOL_IDX_PCM);
|
|
|
|
snapper_set_mix_vol(mix, VOL_IDX_PCM2);
|
|
|
|
snapper_set_mix_vol(mix, VOL_IDX_ADC);
|
|
|
|
tumbler_set_mono_volume(mix, &snapper_bass_vol_info);
|
|
|
|
tumbler_set_mono_volume(mix, &snapper_treble_vol_info);
|
|
|
|
snapper_set_drc(mix);
|
|
|
|
snapper_set_capture_source(mix);
|
|
|
|
}
|
|
|
|
tumbler_set_master_volume(mix);
|
|
|
|
if (chip->update_automute)
|
|
|
|
chip->update_automute(chip, 0);
|
2005-11-15 06:28:05 +00:00
|
|
|
if (mix->headphone_irq >= 0) {
|
|
|
|
unsigned char val;
|
|
|
|
|
2005-04-16 22:24:32 +00:00
|
|
|
enable_irq(mix->headphone_irq);
|
2005-11-15 06:28:05 +00:00
|
|
|
/* activate headphone status interrupts */
|
|
|
|
val = do_gpio_read(&mix->hp_detect);
|
|
|
|
do_gpio_write(&mix->hp_detect, val | 0x80);
|
|
|
|
}
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
if (mix->lineout_irq >= 0)
|
|
|
|
enable_irq(mix->lineout_irq);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* initialize tumbler */
|
2009-06-03 05:35:19 +00:00
|
|
|
static int __devinit tumbler_init(struct snd_pmac *chip)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
int irq;
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
if (tumbler_find_device("audio-hw-reset",
|
|
|
|
"platform-do-hw-reset",
|
|
|
|
&mix->audio_reset, 0) < 0)
|
|
|
|
tumbler_find_device("hw-reset",
|
|
|
|
"platform-do-hw-reset",
|
|
|
|
&mix->audio_reset, 1);
|
|
|
|
if (tumbler_find_device("amp-mute",
|
|
|
|
"platform-do-amp-mute",
|
|
|
|
&mix->amp_mute, 0) < 0)
|
|
|
|
tumbler_find_device("amp-mute",
|
|
|
|
"platform-do-amp-mute",
|
|
|
|
&mix->amp_mute, 1);
|
|
|
|
if (tumbler_find_device("headphone-mute",
|
|
|
|
"platform-do-headphone-mute",
|
|
|
|
&mix->hp_mute, 0) < 0)
|
|
|
|
tumbler_find_device("headphone-mute",
|
|
|
|
"platform-do-headphone-mute",
|
|
|
|
&mix->hp_mute, 1);
|
|
|
|
if (tumbler_find_device("line-output-mute",
|
|
|
|
"platform-do-lineout-mute",
|
|
|
|
&mix->line_mute, 0) < 0)
|
|
|
|
tumbler_find_device("line-output-mute",
|
|
|
|
"platform-do-lineout-mute",
|
|
|
|
&mix->line_mute, 1);
|
|
|
|
irq = tumbler_find_device("headphone-detect",
|
|
|
|
NULL, &mix->hp_detect, 0);
|
2006-07-03 11:36:01 +00:00
|
|
|
if (irq <= NO_IRQ)
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
irq = tumbler_find_device("headphone-detect",
|
|
|
|
NULL, &mix->hp_detect, 1);
|
2006-07-03 11:36:01 +00:00
|
|
|
if (irq <= NO_IRQ)
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
irq = tumbler_find_device("keywest-gpio15",
|
|
|
|
NULL, &mix->hp_detect, 1);
|
|
|
|
mix->headphone_irq = irq;
|
|
|
|
irq = tumbler_find_device("line-output-detect",
|
|
|
|
NULL, &mix->line_detect, 0);
|
2006-07-03 11:36:01 +00:00
|
|
|
if (irq <= NO_IRQ)
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
irq = tumbler_find_device("line-output-detect",
|
|
|
|
NULL, &mix->line_detect, 1);
|
|
|
|
mix->lineout_irq = irq;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
tumbler_reset_audio(chip);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 14:09:46 +00:00
|
|
|
static void tumbler_cleanup(struct snd_pmac *chip)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_tumbler *mix = chip->mixer_data;
|
2005-04-16 22:20:36 +00:00
|
|
|
if (! mix)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (mix->headphone_irq >= 0)
|
|
|
|
free_irq(mix->headphone_irq, chip);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
if (mix->lineout_irq >= 0)
|
|
|
|
free_irq(mix->lineout_irq, chip);
|
2005-04-16 22:20:36 +00:00
|
|
|
tumbler_gpio_free(&mix->audio_reset);
|
|
|
|
tumbler_gpio_free(&mix->amp_mute);
|
|
|
|
tumbler_gpio_free(&mix->hp_mute);
|
|
|
|
tumbler_gpio_free(&mix->hp_detect);
|
|
|
|
snd_pmac_keywest_cleanup(&mix->i2c);
|
|
|
|
kfree(mix);
|
|
|
|
chip->mixer_data = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* exported */
|
2009-06-03 05:35:19 +00:00
|
|
|
int __devinit snd_pmac_tumbler_init(struct snd_pmac *chip)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
int i, err;
|
2005-11-17 14:09:46 +00:00
|
|
|
struct pmac_tumbler *mix;
|
2007-04-03 12:39:14 +00:00
|
|
|
const u32 *paddr;
|
2005-04-16 22:24:32 +00:00
|
|
|
struct device_node *tas_node, *np;
|
2005-04-16 22:20:36 +00:00
|
|
|
char *chipname;
|
|
|
|
|
2008-02-15 03:34:28 +00:00
|
|
|
request_module("i2c-powermac");
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2006-07-25 13:28:03 +00:00
|
|
|
mix = kzalloc(sizeof(*mix), GFP_KERNEL);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (! mix)
|
|
|
|
return -ENOMEM;
|
|
|
|
mix->headphone_irq = -1;
|
|
|
|
|
|
|
|
chip->mixer_data = mix;
|
|
|
|
chip->mixer_free = tumbler_cleanup;
|
2005-04-16 22:24:32 +00:00
|
|
|
mix->anded_reset = 0;
|
|
|
|
mix->reset_on_sleep = 1;
|
|
|
|
|
|
|
|
for (np = chip->node->child; np; np = np->sibling) {
|
|
|
|
if (!strcmp(np->name, "sound")) {
|
2007-04-03 12:39:14 +00:00
|
|
|
if (of_get_property(np, "has-anded-reset", NULL))
|
2005-04-16 22:24:32 +00:00
|
|
|
mix->anded_reset = 1;
|
2007-04-03 12:39:14 +00:00
|
|
|
if (of_get_property(np, "layout-id", NULL))
|
2005-04-16 22:24:32 +00:00
|
|
|
mix->reset_on_sleep = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
if ((err = tumbler_init(chip)) < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
/* set up TAS */
|
2007-04-24 03:53:04 +00:00
|
|
|
tas_node = of_find_node_by_name(NULL, "deq");
|
2005-04-16 22:24:31 +00:00
|
|
|
if (tas_node == NULL)
|
2007-04-24 03:53:04 +00:00
|
|
|
tas_node = of_find_node_by_name(NULL, "codec");
|
2005-04-16 22:20:36 +00:00
|
|
|
if (tas_node == NULL)
|
|
|
|
return -ENODEV;
|
|
|
|
|
2007-04-03 12:39:14 +00:00
|
|
|
paddr = of_get_property(tas_node, "i2c-address", NULL);
|
2005-04-16 22:24:31 +00:00
|
|
|
if (paddr == NULL)
|
2007-04-03 12:39:14 +00:00
|
|
|
paddr = of_get_property(tas_node, "reg", NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (paddr)
|
|
|
|
mix->i2c.addr = (*paddr) >> 1;
|
|
|
|
else
|
|
|
|
mix->i2c.addr = TAS_I2C_ADDR;
|
2007-04-24 03:53:04 +00:00
|
|
|
of_node_put(tas_node);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
DBG("(I) TAS i2c address is: %x\n", mix->i2c.addr);
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
if (chip->model == PMAC_TUMBLER) {
|
|
|
|
mix->i2c.init_client = tumbler_init_client;
|
|
|
|
mix->i2c.name = "TAS3001c";
|
|
|
|
chipname = "Tumbler";
|
|
|
|
} else {
|
|
|
|
mix->i2c.init_client = snapper_init_client;
|
|
|
|
mix->i2c.name = "TAS3004";
|
|
|
|
chipname = "Snapper";
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((err = snd_pmac_keywest_init(&mix->i2c)) < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* build mixers
|
|
|
|
*/
|
|
|
|
sprintf(chip->card->mixername, "PowerMac %s", chipname);
|
|
|
|
|
|
|
|
if (chip->model == PMAC_TUMBLER) {
|
|
|
|
for (i = 0; i < ARRAY_SIZE(tumbler_mixers); i++) {
|
|
|
|
if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&tumbler_mixers[i], chip))) < 0)
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
for (i = 0; i < ARRAY_SIZE(snapper_mixers); i++) {
|
|
|
|
if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snapper_mixers[i], chip))) < 0)
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
chip->master_sw_ctl = snd_ctl_new1(&tumbler_hp_sw, chip);
|
|
|
|
if ((err = snd_ctl_add(chip->card, chip->master_sw_ctl)) < 0)
|
|
|
|
return err;
|
|
|
|
chip->speaker_sw_ctl = snd_ctl_new1(&tumbler_speaker_sw, chip);
|
|
|
|
if ((err = snd_ctl_add(chip->card, chip->speaker_sw_ctl)) < 0)
|
|
|
|
return err;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
if (mix->line_mute.addr != 0) {
|
|
|
|
chip->lineout_sw_ctl = snd_ctl_new1(&tumbler_lineout_sw, chip);
|
|
|
|
if ((err = snd_ctl_add(chip->card, chip->lineout_sw_ctl)) < 0)
|
|
|
|
return err;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
chip->drc_sw_ctl = snd_ctl_new1(&tumbler_drc_sw, chip);
|
|
|
|
if ((err = snd_ctl_add(chip->card, chip->drc_sw_ctl)) < 0)
|
|
|
|
return err;
|
|
|
|
|
2005-09-07 15:08:40 +00:00
|
|
|
/* set initial DRC range to 60% */
|
|
|
|
if (chip->model == PMAC_TUMBLER)
|
|
|
|
mix->drc_range = (TAS3001_DRC_MAX * 6) / 10;
|
|
|
|
else
|
|
|
|
mix->drc_range = (TAS3004_DRC_MAX * 6) / 10;
|
|
|
|
mix->drc_enable = 1; /* will be changed later if AUTO_DRC is set */
|
|
|
|
if (chip->model == PMAC_TUMBLER)
|
|
|
|
tumbler_set_drc(mix);
|
|
|
|
else
|
|
|
|
snapper_set_drc(mix);
|
|
|
|
|
2005-06-27 21:36:34 +00:00
|
|
|
#ifdef CONFIG_PM
|
2005-04-16 22:24:32 +00:00
|
|
|
chip->suspend = tumbler_suspend;
|
2005-04-16 22:20:36 +00:00
|
|
|
chip->resume = tumbler_resume;
|
|
|
|
#endif
|
|
|
|
|
2006-11-22 14:57:56 +00:00
|
|
|
INIT_WORK(&device_change, device_change_handler);
|
|
|
|
device_change_chip = chip;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
#ifdef PMAC_SUPPORT_AUTOMUTE
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
if ((mix->headphone_irq >=0 || mix->lineout_irq >= 0)
|
|
|
|
&& (err = snd_pmac_add_automute(chip)) < 0)
|
2005-04-16 22:20:36 +00:00
|
|
|
return err;
|
|
|
|
chip->detect_headphone = tumbler_detect_headphone;
|
|
|
|
chip->update_automute = tumbler_update_automute;
|
|
|
|
tumbler_update_automute(chip, 0); /* update the status only */
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:24:32 +00:00
|
|
|
|
|
|
|
/* activate headphone status interrupts */
|
|
|
|
if (mix->headphone_irq >= 0) {
|
|
|
|
unsigned char val;
|
|
|
|
if ((err = request_irq(mix->headphone_irq, headphone_intr, 0,
|
|
|
|
"Sound Headphone Detection", chip)) < 0)
|
|
|
|
return 0;
|
|
|
|
/* activate headphone status interrupts */
|
|
|
|
val = do_gpio_read(&mix->hp_detect);
|
|
|
|
do_gpio_write(&mix->hp_detect, val | 0x80);
|
|
|
|
}
|
|
|
|
if (mix->lineout_irq >= 0) {
|
|
|
|
unsigned char val;
|
|
|
|
if ((err = request_irq(mix->lineout_irq, headphone_intr, 0,
|
|
|
|
"Sound Lineout Detection", chip)) < 0)
|
|
|
|
return 0;
|
|
|
|
/* activate headphone status interrupts */
|
|
|
|
val = do_gpio_read(&mix->line_detect);
|
|
|
|
do_gpio_write(&mix->line_detect, val | 0x80);
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|