linux/drivers/gpu/drm/i915/gem/i915_gem_userptr.c

584 lines
16 KiB
C
Raw Normal View History

drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
/*
* SPDX-License-Identifier: MIT
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
*
* Copyright © 2012-2014 Intel Corporation
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
*
* Based on amdgpu_mn, which bears the following notice:
*
* Copyright 2014 Advanced Micro Devices, Inc.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
*/
/*
* Authors:
* Christian König <christian.koenig@amd.com>
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
*/
#include <linux/mmu_context.h>
#include <linux/mempolicy.h>
#include <linux/swap.h>
#include <linux/sched/mm.h>
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
#include "i915_drv.h"
#include "i915_gem_ioctls.h"
#include "i915_gem_object.h"
#include "i915_scatterlist.h"
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
#ifdef CONFIG_MMU_NOTIFIER
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
/**
* i915_gem_userptr_invalidate - callback to notify about mm change
*
* @mni: the range (mm) is about to update
* @range: details on the invalidation
* @cur_seq: Value to pass to mmu_interval_set_seq()
*
* Block for operations on BOs to finish and mark pages as accessed and
* potentially dirty.
*/
static bool i915_gem_userptr_invalidate(struct mmu_interval_notifier *mni,
const struct mmu_notifier_range *range,
unsigned long cur_seq)
{
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
struct drm_i915_gem_object *obj = container_of(mni, struct drm_i915_gem_object, userptr.notifier);
struct drm_i915_private *i915 = to_i915(obj->base.dev);
long r;
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
if (!mmu_notifier_range_blockable(range))
return false;
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
spin_lock(&i915->mm.notifier_lock);
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
mmu_interval_set_seq(mni, cur_seq);
spin_unlock(&i915->mm.notifier_lock);
/*
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
* We don't wait when the process is exiting. This is valid
* because the object will be cleaned up anyway.
*
* This is also temporarily required as a hack, because we
* cannot currently force non-consistent batch buffers to preempt
* and reschedule by waiting on it, hanging processes on exit.
*/
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
if (current->flags & PF_EXITING)
return true;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
/* we will unbind on next submission, still have userptr pins */
r = dma_resv_wait_timeout(obj->base.resv, true, false,
MAX_SCHEDULE_TIMEOUT);
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
if (r <= 0)
drm_err(&i915->drm, "(%ld) failed to wait for idle\n", r);
mm, oom: distinguish blockable mode for mmu notifiers There are several blockable mmu notifiers which might sleep in mmu_notifier_invalidate_range_start and that is a problem for the oom_reaper because it needs to guarantee a forward progress so it cannot depend on any sleepable locks. Currently we simply back off and mark an oom victim with blockable mmu notifiers as done after a short sleep. That can result in selecting a new oom victim prematurely because the previous one still hasn't torn its memory down yet. We can do much better though. Even if mmu notifiers use sleepable locks there is no reason to automatically assume those locks are held. Moreover majority of notifiers only care about a portion of the address space and there is absolutely zero reason to fail when we are unmapping an unrelated range. Many notifiers do really block and wait for HW which is harder to handle and we have to bail out though. This patch handles the low hanging fruit. __mmu_notifier_invalidate_range_start gets a blockable flag and callbacks are not allowed to sleep if the flag is set to false. This is achieved by using trylock instead of the sleepable lock for most callbacks and continue as long as we do not block down the call chain. I think we can improve that even further because there is a common pattern to do a range lookup first and then do something about that. The first part can be done without a sleeping lock in most cases AFAICS. The oom_reaper end then simply retries if there is at least one notifier which couldn't make any progress in !blockable mode. A retry loop is already implemented to wait for the mmap_sem and this is basically the same thing. The simplest way for driver developers to test this code path is to wrap userspace code which uses these notifiers into a memcg and set the hard limit to hit the oom. This can be done e.g. after the test faults in all the mmu notifier managed memory and set the hard limit to something really small. Then we are looking for a proper process tear down. [akpm@linux-foundation.org: coding style fixes] [akpm@linux-foundation.org: minor code simplification] Link: http://lkml.kernel.org/r/20180716115058.5559-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Christian König <christian.koenig@amd.com> # AMD notifiers Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx and umem_odp Reported-by: David Rientjes <rientjes@google.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:33 +00:00
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
return true;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
}
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
static const struct mmu_interval_notifier_ops i915_gem_userptr_notifier_ops = {
.invalidate = i915_gem_userptr_invalidate,
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
};
static int
i915_gem_userptr_init__mmu_notifier(struct drm_i915_gem_object *obj)
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
{
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
return mmu_interval_notifier_insert(&obj->userptr.notifier, current->mm,
obj->userptr.ptr, obj->base.size,
&i915_gem_userptr_notifier_ops);
drm/i915: Prevent recursive deadlock on releasing a busy userptr During release of the GEM object we hold the struct_mutex. As the object may be holding onto the last reference for the task->mm, calling mmput() may trigger exit_mmap() which close the vma which will call drm_gem_vm_close() and attempt to reacquire the struct_mutex. In order to avoid that recursion, we have to defer the mmput() until after we drop the struct_mutex, i.e. we need to schedule a worker to do the clean up. A further issue spotted by Tvrtko was caused when we took a GTT mmapping of a userptr buffer object. In that case, we would never call mmput as the object would be cyclically referenced by the GTT mmapping and not freed upon process exit - keeping the entire process mm alive after the process task was reaped. The fix employed is to replace the mm_users/mmput() reference handling to mm_count/mmdrop() for the shared i915_mm_struct. INFO: task test_surfaces:1632 blocked for more than 120 seconds.       Tainted: GF          O 3.14.5+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. test_surfaces   D 0000000000000000     0  1632   1590 0x00000082  ffff88014914baa8 0000000000000046 0000000000000000 ffff88014914a010  0000000000012c40 0000000000012c40 ffff8800a0058210 ffff88014784b010  ffff88014914a010 ffff880037b1c820 ffff8800a0058210 ffff880037b1c824 Call Trace:  [<ffffffff81582499>] schedule+0x29/0x70  [<ffffffff815825fe>] schedule_preempt_disabled+0xe/0x10  [<ffffffff81583b93>] __mutex_lock_slowpath+0x183/0x220  [<ffffffff81583c53>] mutex_lock+0x23/0x40  [<ffffffffa005c2a3>] drm_gem_vm_close+0x33/0x70 [drm]  [<ffffffff8115a483>] remove_vma+0x33/0x70  [<ffffffff8115a5dc>] exit_mmap+0x11c/0x170  [<ffffffff8104d6eb>] mmput+0x6b/0x100  [<ffffffffa00f44b9>] i915_gem_userptr_release+0x89/0xc0 [i915]  [<ffffffffa00e6706>] i915_gem_free_object+0x126/0x250 [i915]  [<ffffffffa005c06a>] drm_gem_object_free+0x2a/0x40 [drm]  [<ffffffffa005cc32>] drm_gem_object_handle_unreference_unlocked+0xe2/0x120 [drm]  [<ffffffffa005ccd4>] drm_gem_object_release_handle+0x64/0x90 [drm]  [<ffffffff8127ffeb>] idr_for_each+0xab/0x100  [<ffffffffa005cc70>] ? drm_gem_object_handle_unreference_unlocked+0x120/0x120 [drm]  [<ffffffff81583c46>] ? mutex_lock+0x16/0x40  [<ffffffffa005c354>] drm_gem_release+0x24/0x40 [drm]  [<ffffffffa005b82b>] drm_release+0x3fb/0x480 [drm]  [<ffffffff8118d482>] __fput+0xb2/0x260  [<ffffffff8118d6de>] ____fput+0xe/0x10  [<ffffffff8106f27f>] task_work_run+0x8f/0xf0  [<ffffffff81052228>] do_exit+0x1a8/0x480  [<ffffffff81052551>] do_group_exit+0x51/0xc0  [<ffffffff810525d7>] SyS_exit_group+0x17/0x20  [<ffffffff8158e092>] system_call_fastpath+0x16/0x1b v2: Incorporate feedback from Tvrtko and remove the unnessary mm referencing when creating the i915_mm_struct and improve some of the function names and comments. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Test-case: igt/gem_userptr_blits/process-exit* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Jacek Danecki <jacek.danecki@intel.com> Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Reviewed-by: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org # hold off until 3.17 ships for additional testing Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-08-07 13:20:40 +00:00
}
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
static void i915_gem_object_userptr_drop_ref(struct drm_i915_gem_object *obj)
drm/i915: Prevent recursive deadlock on releasing a busy userptr During release of the GEM object we hold the struct_mutex. As the object may be holding onto the last reference for the task->mm, calling mmput() may trigger exit_mmap() which close the vma which will call drm_gem_vm_close() and attempt to reacquire the struct_mutex. In order to avoid that recursion, we have to defer the mmput() until after we drop the struct_mutex, i.e. we need to schedule a worker to do the clean up. A further issue spotted by Tvrtko was caused when we took a GTT mmapping of a userptr buffer object. In that case, we would never call mmput as the object would be cyclically referenced by the GTT mmapping and not freed upon process exit - keeping the entire process mm alive after the process task was reaped. The fix employed is to replace the mm_users/mmput() reference handling to mm_count/mmdrop() for the shared i915_mm_struct. INFO: task test_surfaces:1632 blocked for more than 120 seconds.       Tainted: GF          O 3.14.5+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. test_surfaces   D 0000000000000000     0  1632   1590 0x00000082  ffff88014914baa8 0000000000000046 0000000000000000 ffff88014914a010  0000000000012c40 0000000000012c40 ffff8800a0058210 ffff88014784b010  ffff88014914a010 ffff880037b1c820 ffff8800a0058210 ffff880037b1c824 Call Trace:  [<ffffffff81582499>] schedule+0x29/0x70  [<ffffffff815825fe>] schedule_preempt_disabled+0xe/0x10  [<ffffffff81583b93>] __mutex_lock_slowpath+0x183/0x220  [<ffffffff81583c53>] mutex_lock+0x23/0x40  [<ffffffffa005c2a3>] drm_gem_vm_close+0x33/0x70 [drm]  [<ffffffff8115a483>] remove_vma+0x33/0x70  [<ffffffff8115a5dc>] exit_mmap+0x11c/0x170  [<ffffffff8104d6eb>] mmput+0x6b/0x100  [<ffffffffa00f44b9>] i915_gem_userptr_release+0x89/0xc0 [i915]  [<ffffffffa00e6706>] i915_gem_free_object+0x126/0x250 [i915]  [<ffffffffa005c06a>] drm_gem_object_free+0x2a/0x40 [drm]  [<ffffffffa005cc32>] drm_gem_object_handle_unreference_unlocked+0xe2/0x120 [drm]  [<ffffffffa005ccd4>] drm_gem_object_release_handle+0x64/0x90 [drm]  [<ffffffff8127ffeb>] idr_for_each+0xab/0x100  [<ffffffffa005cc70>] ? drm_gem_object_handle_unreference_unlocked+0x120/0x120 [drm]  [<ffffffff81583c46>] ? mutex_lock+0x16/0x40  [<ffffffffa005c354>] drm_gem_release+0x24/0x40 [drm]  [<ffffffffa005b82b>] drm_release+0x3fb/0x480 [drm]  [<ffffffff8118d482>] __fput+0xb2/0x260  [<ffffffff8118d6de>] ____fput+0xe/0x10  [<ffffffff8106f27f>] task_work_run+0x8f/0xf0  [<ffffffff81052228>] do_exit+0x1a8/0x480  [<ffffffff81052551>] do_group_exit+0x51/0xc0  [<ffffffff810525d7>] SyS_exit_group+0x17/0x20  [<ffffffff8158e092>] system_call_fastpath+0x16/0x1b v2: Incorporate feedback from Tvrtko and remove the unnessary mm referencing when creating the i915_mm_struct and improve some of the function names and comments. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Test-case: igt/gem_userptr_blits/process-exit* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Jacek Danecki <jacek.danecki@intel.com> Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Reviewed-by: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org # hold off until 3.17 ships for additional testing Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-08-07 13:20:40 +00:00
{
struct drm_i915_private *i915 = to_i915(obj->base.dev);
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
struct page **pvec = NULL;
drm/i915: Prevent recursive deadlock on releasing a busy userptr During release of the GEM object we hold the struct_mutex. As the object may be holding onto the last reference for the task->mm, calling mmput() may trigger exit_mmap() which close the vma which will call drm_gem_vm_close() and attempt to reacquire the struct_mutex. In order to avoid that recursion, we have to defer the mmput() until after we drop the struct_mutex, i.e. we need to schedule a worker to do the clean up. A further issue spotted by Tvrtko was caused when we took a GTT mmapping of a userptr buffer object. In that case, we would never call mmput as the object would be cyclically referenced by the GTT mmapping and not freed upon process exit - keeping the entire process mm alive after the process task was reaped. The fix employed is to replace the mm_users/mmput() reference handling to mm_count/mmdrop() for the shared i915_mm_struct. INFO: task test_surfaces:1632 blocked for more than 120 seconds.       Tainted: GF          O 3.14.5+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. test_surfaces   D 0000000000000000     0  1632   1590 0x00000082  ffff88014914baa8 0000000000000046 0000000000000000 ffff88014914a010  0000000000012c40 0000000000012c40 ffff8800a0058210 ffff88014784b010  ffff88014914a010 ffff880037b1c820 ffff8800a0058210 ffff880037b1c824 Call Trace:  [<ffffffff81582499>] schedule+0x29/0x70  [<ffffffff815825fe>] schedule_preempt_disabled+0xe/0x10  [<ffffffff81583b93>] __mutex_lock_slowpath+0x183/0x220  [<ffffffff81583c53>] mutex_lock+0x23/0x40  [<ffffffffa005c2a3>] drm_gem_vm_close+0x33/0x70 [drm]  [<ffffffff8115a483>] remove_vma+0x33/0x70  [<ffffffff8115a5dc>] exit_mmap+0x11c/0x170  [<ffffffff8104d6eb>] mmput+0x6b/0x100  [<ffffffffa00f44b9>] i915_gem_userptr_release+0x89/0xc0 [i915]  [<ffffffffa00e6706>] i915_gem_free_object+0x126/0x250 [i915]  [<ffffffffa005c06a>] drm_gem_object_free+0x2a/0x40 [drm]  [<ffffffffa005cc32>] drm_gem_object_handle_unreference_unlocked+0xe2/0x120 [drm]  [<ffffffffa005ccd4>] drm_gem_object_release_handle+0x64/0x90 [drm]  [<ffffffff8127ffeb>] idr_for_each+0xab/0x100  [<ffffffffa005cc70>] ? drm_gem_object_handle_unreference_unlocked+0x120/0x120 [drm]  [<ffffffff81583c46>] ? mutex_lock+0x16/0x40  [<ffffffffa005c354>] drm_gem_release+0x24/0x40 [drm]  [<ffffffffa005b82b>] drm_release+0x3fb/0x480 [drm]  [<ffffffff8118d482>] __fput+0xb2/0x260  [<ffffffff8118d6de>] ____fput+0xe/0x10  [<ffffffff8106f27f>] task_work_run+0x8f/0xf0  [<ffffffff81052228>] do_exit+0x1a8/0x480  [<ffffffff81052551>] do_group_exit+0x51/0xc0  [<ffffffff810525d7>] SyS_exit_group+0x17/0x20  [<ffffffff8158e092>] system_call_fastpath+0x16/0x1b v2: Incorporate feedback from Tvrtko and remove the unnessary mm referencing when creating the i915_mm_struct and improve some of the function names and comments. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Test-case: igt/gem_userptr_blits/process-exit* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Jacek Danecki <jacek.danecki@intel.com> Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Reviewed-by: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org # hold off until 3.17 ships for additional testing Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-08-07 13:20:40 +00:00
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
spin_lock(&i915->mm.notifier_lock);
if (!--obj->userptr.page_ref) {
pvec = obj->userptr.pvec;
obj->userptr.pvec = NULL;
}
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
GEM_BUG_ON(obj->userptr.page_ref < 0);
spin_unlock(&i915->mm.notifier_lock);
drm/i915: Prevent recursive deadlock on releasing a busy userptr During release of the GEM object we hold the struct_mutex. As the object may be holding onto the last reference for the task->mm, calling mmput() may trigger exit_mmap() which close the vma which will call drm_gem_vm_close() and attempt to reacquire the struct_mutex. In order to avoid that recursion, we have to defer the mmput() until after we drop the struct_mutex, i.e. we need to schedule a worker to do the clean up. A further issue spotted by Tvrtko was caused when we took a GTT mmapping of a userptr buffer object. In that case, we would never call mmput as the object would be cyclically referenced by the GTT mmapping and not freed upon process exit - keeping the entire process mm alive after the process task was reaped. The fix employed is to replace the mm_users/mmput() reference handling to mm_count/mmdrop() for the shared i915_mm_struct. INFO: task test_surfaces:1632 blocked for more than 120 seconds.       Tainted: GF          O 3.14.5+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. test_surfaces   D 0000000000000000     0  1632   1590 0x00000082  ffff88014914baa8 0000000000000046 0000000000000000 ffff88014914a010  0000000000012c40 0000000000012c40 ffff8800a0058210 ffff88014784b010  ffff88014914a010 ffff880037b1c820 ffff8800a0058210 ffff880037b1c824 Call Trace:  [<ffffffff81582499>] schedule+0x29/0x70  [<ffffffff815825fe>] schedule_preempt_disabled+0xe/0x10  [<ffffffff81583b93>] __mutex_lock_slowpath+0x183/0x220  [<ffffffff81583c53>] mutex_lock+0x23/0x40  [<ffffffffa005c2a3>] drm_gem_vm_close+0x33/0x70 [drm]  [<ffffffff8115a483>] remove_vma+0x33/0x70  [<ffffffff8115a5dc>] exit_mmap+0x11c/0x170  [<ffffffff8104d6eb>] mmput+0x6b/0x100  [<ffffffffa00f44b9>] i915_gem_userptr_release+0x89/0xc0 [i915]  [<ffffffffa00e6706>] i915_gem_free_object+0x126/0x250 [i915]  [<ffffffffa005c06a>] drm_gem_object_free+0x2a/0x40 [drm]  [<ffffffffa005cc32>] drm_gem_object_handle_unreference_unlocked+0xe2/0x120 [drm]  [<ffffffffa005ccd4>] drm_gem_object_release_handle+0x64/0x90 [drm]  [<ffffffff8127ffeb>] idr_for_each+0xab/0x100  [<ffffffffa005cc70>] ? drm_gem_object_handle_unreference_unlocked+0x120/0x120 [drm]  [<ffffffff81583c46>] ? mutex_lock+0x16/0x40  [<ffffffffa005c354>] drm_gem_release+0x24/0x40 [drm]  [<ffffffffa005b82b>] drm_release+0x3fb/0x480 [drm]  [<ffffffff8118d482>] __fput+0xb2/0x260  [<ffffffff8118d6de>] ____fput+0xe/0x10  [<ffffffff8106f27f>] task_work_run+0x8f/0xf0  [<ffffffff81052228>] do_exit+0x1a8/0x480  [<ffffffff81052551>] do_group_exit+0x51/0xc0  [<ffffffff810525d7>] SyS_exit_group+0x17/0x20  [<ffffffff8158e092>] system_call_fastpath+0x16/0x1b v2: Incorporate feedback from Tvrtko and remove the unnessary mm referencing when creating the i915_mm_struct and improve some of the function names and comments. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Test-case: igt/gem_userptr_blits/process-exit* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Jacek Danecki <jacek.danecki@intel.com> Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Reviewed-by: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org # hold off until 3.17 ships for additional testing Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-08-07 13:20:40 +00:00
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
if (pvec) {
const unsigned long num_pages = obj->base.size >> PAGE_SHIFT;
drm/i915: Prevent recursive deadlock on releasing a busy userptr During release of the GEM object we hold the struct_mutex. As the object may be holding onto the last reference for the task->mm, calling mmput() may trigger exit_mmap() which close the vma which will call drm_gem_vm_close() and attempt to reacquire the struct_mutex. In order to avoid that recursion, we have to defer the mmput() until after we drop the struct_mutex, i.e. we need to schedule a worker to do the clean up. A further issue spotted by Tvrtko was caused when we took a GTT mmapping of a userptr buffer object. In that case, we would never call mmput as the object would be cyclically referenced by the GTT mmapping and not freed upon process exit - keeping the entire process mm alive after the process task was reaped. The fix employed is to replace the mm_users/mmput() reference handling to mm_count/mmdrop() for the shared i915_mm_struct. INFO: task test_surfaces:1632 blocked for more than 120 seconds.       Tainted: GF          O 3.14.5+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. test_surfaces   D 0000000000000000     0  1632   1590 0x00000082  ffff88014914baa8 0000000000000046 0000000000000000 ffff88014914a010  0000000000012c40 0000000000012c40 ffff8800a0058210 ffff88014784b010  ffff88014914a010 ffff880037b1c820 ffff8800a0058210 ffff880037b1c824 Call Trace:  [<ffffffff81582499>] schedule+0x29/0x70  [<ffffffff815825fe>] schedule_preempt_disabled+0xe/0x10  [<ffffffff81583b93>] __mutex_lock_slowpath+0x183/0x220  [<ffffffff81583c53>] mutex_lock+0x23/0x40  [<ffffffffa005c2a3>] drm_gem_vm_close+0x33/0x70 [drm]  [<ffffffff8115a483>] remove_vma+0x33/0x70  [<ffffffff8115a5dc>] exit_mmap+0x11c/0x170  [<ffffffff8104d6eb>] mmput+0x6b/0x100  [<ffffffffa00f44b9>] i915_gem_userptr_release+0x89/0xc0 [i915]  [<ffffffffa00e6706>] i915_gem_free_object+0x126/0x250 [i915]  [<ffffffffa005c06a>] drm_gem_object_free+0x2a/0x40 [drm]  [<ffffffffa005cc32>] drm_gem_object_handle_unreference_unlocked+0xe2/0x120 [drm]  [<ffffffffa005ccd4>] drm_gem_object_release_handle+0x64/0x90 [drm]  [<ffffffff8127ffeb>] idr_for_each+0xab/0x100  [<ffffffffa005cc70>] ? drm_gem_object_handle_unreference_unlocked+0x120/0x120 [drm]  [<ffffffff81583c46>] ? mutex_lock+0x16/0x40  [<ffffffffa005c354>] drm_gem_release+0x24/0x40 [drm]  [<ffffffffa005b82b>] drm_release+0x3fb/0x480 [drm]  [<ffffffff8118d482>] __fput+0xb2/0x260  [<ffffffff8118d6de>] ____fput+0xe/0x10  [<ffffffff8106f27f>] task_work_run+0x8f/0xf0  [<ffffffff81052228>] do_exit+0x1a8/0x480  [<ffffffff81052551>] do_group_exit+0x51/0xc0  [<ffffffff810525d7>] SyS_exit_group+0x17/0x20  [<ffffffff8158e092>] system_call_fastpath+0x16/0x1b v2: Incorporate feedback from Tvrtko and remove the unnessary mm referencing when creating the i915_mm_struct and improve some of the function names and comments. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Test-case: igt/gem_userptr_blits/process-exit* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Jacek Danecki <jacek.danecki@intel.com> Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Reviewed-by: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org # hold off until 3.17 ships for additional testing Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-08-07 13:20:40 +00:00
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
unpin_user_pages(pvec, num_pages);
kvfree(pvec);
}
drm/i915: Prevent recursive deadlock on releasing a busy userptr During release of the GEM object we hold the struct_mutex. As the object may be holding onto the last reference for the task->mm, calling mmput() may trigger exit_mmap() which close the vma which will call drm_gem_vm_close() and attempt to reacquire the struct_mutex. In order to avoid that recursion, we have to defer the mmput() until after we drop the struct_mutex, i.e. we need to schedule a worker to do the clean up. A further issue spotted by Tvrtko was caused when we took a GTT mmapping of a userptr buffer object. In that case, we would never call mmput as the object would be cyclically referenced by the GTT mmapping and not freed upon process exit - keeping the entire process mm alive after the process task was reaped. The fix employed is to replace the mm_users/mmput() reference handling to mm_count/mmdrop() for the shared i915_mm_struct. INFO: task test_surfaces:1632 blocked for more than 120 seconds.       Tainted: GF          O 3.14.5+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. test_surfaces   D 0000000000000000     0  1632   1590 0x00000082  ffff88014914baa8 0000000000000046 0000000000000000 ffff88014914a010  0000000000012c40 0000000000012c40 ffff8800a0058210 ffff88014784b010  ffff88014914a010 ffff880037b1c820 ffff8800a0058210 ffff880037b1c824 Call Trace:  [<ffffffff81582499>] schedule+0x29/0x70  [<ffffffff815825fe>] schedule_preempt_disabled+0xe/0x10  [<ffffffff81583b93>] __mutex_lock_slowpath+0x183/0x220  [<ffffffff81583c53>] mutex_lock+0x23/0x40  [<ffffffffa005c2a3>] drm_gem_vm_close+0x33/0x70 [drm]  [<ffffffff8115a483>] remove_vma+0x33/0x70  [<ffffffff8115a5dc>] exit_mmap+0x11c/0x170  [<ffffffff8104d6eb>] mmput+0x6b/0x100  [<ffffffffa00f44b9>] i915_gem_userptr_release+0x89/0xc0 [i915]  [<ffffffffa00e6706>] i915_gem_free_object+0x126/0x250 [i915]  [<ffffffffa005c06a>] drm_gem_object_free+0x2a/0x40 [drm]  [<ffffffffa005cc32>] drm_gem_object_handle_unreference_unlocked+0xe2/0x120 [drm]  [<ffffffffa005ccd4>] drm_gem_object_release_handle+0x64/0x90 [drm]  [<ffffffff8127ffeb>] idr_for_each+0xab/0x100  [<ffffffffa005cc70>] ? drm_gem_object_handle_unreference_unlocked+0x120/0x120 [drm]  [<ffffffff81583c46>] ? mutex_lock+0x16/0x40  [<ffffffffa005c354>] drm_gem_release+0x24/0x40 [drm]  [<ffffffffa005b82b>] drm_release+0x3fb/0x480 [drm]  [<ffffffff8118d482>] __fput+0xb2/0x260  [<ffffffff8118d6de>] ____fput+0xe/0x10  [<ffffffff8106f27f>] task_work_run+0x8f/0xf0  [<ffffffff81052228>] do_exit+0x1a8/0x480  [<ffffffff81052551>] do_group_exit+0x51/0xc0  [<ffffffff810525d7>] SyS_exit_group+0x17/0x20  [<ffffffff8158e092>] system_call_fastpath+0x16/0x1b v2: Incorporate feedback from Tvrtko and remove the unnessary mm referencing when creating the i915_mm_struct and improve some of the function names and comments. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Test-case: igt/gem_userptr_blits/process-exit* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Jacek Danecki <jacek.danecki@intel.com> Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Reviewed-by: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org # hold off until 3.17 ships for additional testing Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-08-07 13:20:40 +00:00
}
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
static int i915_gem_userptr_get_pages(struct drm_i915_gem_object *obj)
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 09:59:05 +00:00
{
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
struct drm_i915_private *i915 = to_i915(obj->base.dev);
const unsigned long num_pages = obj->base.size >> PAGE_SHIFT;
unsigned int max_segment = i915_sg_segment_size();
struct sg_table *st;
unsigned int sg_page_sizes;
struct scatterlist *sg;
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
struct page **pvec;
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 09:59:05 +00:00
int ret;
st = kmalloc(sizeof(*st), GFP_KERNEL);
if (!st)
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
return -ENOMEM;
spin_lock(&i915->mm.notifier_lock);
if (GEM_WARN_ON(!obj->userptr.page_ref)) {
spin_unlock(&i915->mm.notifier_lock);
ret = -EFAULT;
goto err_free;
}
obj->userptr.page_ref++;
pvec = obj->userptr.pvec;
spin_unlock(&i915->mm.notifier_lock);
alloc_table:
sg = __sg_alloc_table_from_pages(st, pvec, num_pages, 0,
num_pages << PAGE_SHIFT, max_segment,
NULL, 0, GFP_KERNEL);
if (IS_ERR(sg)) {
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
ret = PTR_ERR(sg);
goto err;
}
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 09:59:05 +00:00
ret = i915_gem_gtt_prepare_pages(obj, st);
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 09:59:05 +00:00
if (ret) {
sg_free_table(st);
if (max_segment > PAGE_SIZE) {
max_segment = PAGE_SIZE;
goto alloc_table;
}
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
goto err;
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 09:59:05 +00:00
}
sg_page_sizes = i915_sg_dma_sizes(st->sgl);
__i915_gem_object_set_pages(obj, st, sg_page_sizes);
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
return 0;
drm/i915/userptr: Disallow wrapping GTT into a userptr If we allow the user to convert a GTT mmap address into a userptr, we may end up in recursion hell, where currently we hit a mutex deadlock but other possibilities include use-after-free during the unbind/cancel_userptr. [ 143.203989] gem_userptr_bli D 0 902 898 0x00000000 [ 143.204054] Call Trace: [ 143.204137] __schedule+0x511/0x1180 [ 143.204195] ? pci_mmcfg_check_reserved+0xc0/0xc0 [ 143.204274] schedule+0x57/0xe0 [ 143.204327] schedule_timeout+0x383/0x670 [ 143.204374] ? trace_hardirqs_on_caller+0x187/0x280 [ 143.204457] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 143.204507] ? usleep_range+0x110/0x110 [ 143.204657] ? irq_exit+0x89/0x100 [ 143.204710] ? retint_kernel+0x2d/0x2d [ 143.204794] ? trace_hardirqs_on_caller+0x187/0x280 [ 143.204857] ? _raw_spin_unlock_irq+0x33/0x60 [ 143.204944] wait_for_common+0x1f0/0x2f0 [ 143.205006] ? out_of_line_wait_on_atomic_t+0x170/0x170 [ 143.205103] ? wake_up_q+0xa0/0xa0 [ 143.205159] ? flush_workqueue_prep_pwqs+0x15a/0x2c0 [ 143.205237] wait_for_completion+0x1d/0x20 [ 143.205292] flush_workqueue+0x2e9/0xbb0 [ 143.205339] ? flush_workqueue+0x163/0xbb0 [ 143.205418] ? __schedule+0x533/0x1180 [ 143.205498] ? check_flush_dependency+0x1a0/0x1a0 [ 143.205681] i915_gem_userptr_mn_invalidate_range_start+0x1c7/0x270 [i915] [ 143.205865] ? i915_gem_userptr_dmabuf_export+0x40/0x40 [i915] [ 143.205955] __mmu_notifier_invalidate_range_start+0xc6/0x120 [ 143.206044] ? __mmu_notifier_invalidate_range_start+0x51/0x120 [ 143.206123] zap_page_range_single+0x1c7/0x1f0 [ 143.206171] ? unmap_single_vma+0x160/0x160 [ 143.206260] ? unmap_mapping_range+0xa9/0x1b0 [ 143.206308] ? vma_interval_tree_subtree_search+0x75/0xd0 [ 143.206397] unmap_mapping_range+0x18f/0x1b0 [ 143.206444] ? zap_vma_ptes+0x70/0x70 [ 143.206524] ? __pm_runtime_resume+0x67/0xa0 [ 143.206723] i915_gem_release_mmap+0x1ba/0x1c0 [i915] [ 143.206846] i915_vma_unbind+0x5c2/0x690 [i915] [ 143.206925] ? __lock_is_held+0x52/0x100 [ 143.207076] i915_gem_object_set_tiling+0x1db/0x650 [i915] [ 143.207236] i915_gem_set_tiling_ioctl+0x1d3/0x3b0 [i915] [ 143.207377] ? i915_gem_set_tiling_ioctl+0x5/0x3b0 [i915] [ 143.207457] drm_ioctl+0x36c/0x670 [ 143.207535] ? debug_lockdep_rcu_enabled.part.0+0x1a/0x30 [ 143.207730] ? i915_gem_object_set_tiling+0x650/0x650 [i915] [ 143.207793] ? drm_getunique+0x120/0x120 [ 143.207875] ? __handle_mm_fault+0x996/0x14a0 [ 143.207939] ? vm_insert_page+0x340/0x340 [ 143.208028] ? up_write+0x28/0x50 [ 143.208086] ? vm_mmap_pgoff+0x160/0x190 [ 143.208163] do_vfs_ioctl+0x12c/0xa60 [ 143.208218] ? debug_lockdep_rcu_enabled+0x35/0x40 [ 143.208267] ? ioctl_preallocate+0x150/0x150 [ 143.208353] ? __do_page_fault+0x36a/0x6e0 [ 143.208400] ? mark_held_locks+0x23/0xc0 [ 143.208479] ? up_read+0x1f/0x40 [ 143.208526] ? entry_SYSCALL_64_fastpath+0x5/0xc6 [ 143.208669] ? __fget_light+0xa7/0xc0 [ 143.208747] SyS_ioctl+0x41/0x70 To prevent the possibility of a deadlock, we defer scheduling the worker until after we have proven that given the current mm, the userptr range does not overlap a GGTT mmaping. If another thread tries to remap the GGTT over the userptr before the worker is scheduled, it will be stopped by its invalidate-range flushing the current work, before the deadlock can occur. v2: Improve discussion of how we end up in the deadlock. v3: Don't forget to mark the userptr as active after a successful gup_fast. Rename overlaps_ggtt to noncontiguous_or_overlaps_ggtt. v4: Fix test ordering between invalid GTT mmaping and range completion (Tvrtko) Reported-by: Michał Winiarski <michal.winiarski@intel.com> Testcase: igt/gem_userptr_blits/map-fixed-invalidate-gup Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308215903.24171-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2017-03-08 21:59:03 +00:00
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
err:
i915_gem_object_userptr_drop_ref(obj);
err_free:
kfree(st);
return ret;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
}
static void
i915_gem_userptr_put_pages(struct drm_i915_gem_object *obj,
struct sg_table *pages)
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
{
struct sgt_iter sgt_iter;
struct page *page;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
if (!pages)
return;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
__i915_gem_object_release_shmem(obj, pages, true);
i915_gem_gtt_finish_pages(obj, pages);
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 09:59:05 +00:00
/*
* We always mark objects as dirty when they are used by the GPU,
* just in case. However, if we set the vma as being read-only we know
* that the object will never have been written to.
*/
if (i915_gem_object_is_readonly(obj))
obj->mm.dirty = false;
for_each_sgt_page(page, sgt_iter, pages) {
drm/i915/userptr: Try to acquire the page lock around set_page_dirty() set_page_dirty says: For pages with a mapping this should be done under the page lock for the benefit of asynchronous memory errors who prefer a consistent dirty state. This rule can be broken in some special cases, but should be better not to. Under those rules, it is only safe for us to use the plain set_page_dirty calls for shmemfs/anonymous memory. Userptr may be used with real mappings and so needs to use the locked version (set_page_dirty_lock). However, following a try_to_unmap() we may want to remove the userptr and so call put_pages(). However, try_to_unmap() acquires the page lock and so we must avoid recursively locking the pages ourselves -- which means that we cannot safely acquire the lock around set_page_dirty(). Since we can't be sure of the lock, we have to risk skip dirtying the page, or else risk calling set_page_dirty() without a lock and so risk fs corruption. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012 Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") References: cb6d7c7dc7ff ("drm/i915/userptr: Acquire the page lock around set_page_dirty()") References: 505a8ec7e11a ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"") References: 6dcc693bc57f ("ext4: warn when page is dirtied without buffers") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
2019-11-11 13:32:03 +00:00
if (obj->mm.dirty && trylock_page(page)) {
/*
* As this may not be anonymous memory (e.g. shmem)
* but exist on a real mapping, we have to lock
* the page in order to dirty it -- holding
* the page reference is not sufficient to
* prevent the inode from being truncated.
* Play safe and take the lock.
*
* However...!
*
* The mmu-notifier can be invalidated for a
* migrate_page, that is alreadying holding the lock
* on the page. Such a try_to_unmap() will result
* in us calling put_pages() and so recursively try
* to lock the page. We avoid that deadlock with
* a trylock_page() and in exchange we risk missing
* some page dirtying.
*/
set_page_dirty(page);
drm/i915/userptr: Try to acquire the page lock around set_page_dirty() set_page_dirty says: For pages with a mapping this should be done under the page lock for the benefit of asynchronous memory errors who prefer a consistent dirty state. This rule can be broken in some special cases, but should be better not to. Under those rules, it is only safe for us to use the plain set_page_dirty calls for shmemfs/anonymous memory. Userptr may be used with real mappings and so needs to use the locked version (set_page_dirty_lock). However, following a try_to_unmap() we may want to remove the userptr and so call put_pages(). However, try_to_unmap() acquires the page lock and so we must avoid recursively locking the pages ourselves -- which means that we cannot safely acquire the lock around set_page_dirty(). Since we can't be sure of the lock, we have to risk skip dirtying the page, or else risk calling set_page_dirty() without a lock and so risk fs corruption. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012 Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") References: cb6d7c7dc7ff ("drm/i915/userptr: Acquire the page lock around set_page_dirty()") References: 505a8ec7e11a ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"") References: 6dcc693bc57f ("ext4: warn when page is dirtied without buffers") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
2019-11-11 13:32:03 +00:00
unlock_page(page);
}
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
mark_page_accessed(page);
}
obj->mm.dirty = false;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
sg_free_table(pages);
kfree(pages);
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
i915_gem_object_userptr_drop_ref(obj);
}
static int i915_gem_object_userptr_unbind(struct drm_i915_gem_object *obj, bool get_pages)
{
struct sg_table *pages;
int err;
err = i915_gem_object_unbind(obj, I915_GEM_OBJECT_UNBIND_ACTIVE);
if (err)
return err;
if (GEM_WARN_ON(i915_gem_object_has_pinned_pages(obj)))
return -EBUSY;
assert_object_held(obj);
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
pages = __i915_gem_object_unset_pages(obj);
if (!IS_ERR_OR_NULL(pages))
i915_gem_userptr_put_pages(obj, pages);
if (get_pages)
err = ____i915_gem_object_get_pages(obj);
return err;
}
int i915_gem_object_userptr_submit_init(struct drm_i915_gem_object *obj)
{
struct drm_i915_private *i915 = to_i915(obj->base.dev);
const unsigned long num_pages = obj->base.size >> PAGE_SHIFT;
struct page **pvec;
unsigned int gup_flags = 0;
unsigned long notifier_seq;
int pinned, ret;
if (obj->userptr.notifier.mm != current->mm)
return -EFAULT;
ret = i915_gem_object_lock_interruptible(obj, NULL);
if (ret)
return ret;
/* optimistically try to preserve current pages while unlocked */
if (i915_gem_object_has_pages(obj) &&
!mmu_interval_check_retry(&obj->userptr.notifier,
obj->userptr.notifier_seq)) {
spin_lock(&i915->mm.notifier_lock);
if (obj->userptr.pvec &&
!mmu_interval_read_retry(&obj->userptr.notifier,
obj->userptr.notifier_seq)) {
obj->userptr.page_ref++;
/* We can keep using the current binding, this is the fastpath */
ret = 1;
}
spin_unlock(&i915->mm.notifier_lock);
}
if (!ret) {
/* Make sure userptr is unbound for next attempt, so we don't use stale pages. */
ret = i915_gem_object_userptr_unbind(obj, false);
}
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
i915_gem_object_unlock(obj);
if (ret < 0)
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
return ret;
if (ret > 0)
return 0;
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
notifier_seq = mmu_interval_read_begin(&obj->userptr.notifier);
pvec = kvmalloc_array(num_pages, sizeof(struct page *), GFP_KERNEL);
if (!pvec)
return -ENOMEM;
if (!i915_gem_object_is_readonly(obj))
gup_flags |= FOLL_WRITE;
pinned = ret = 0;
while (pinned < num_pages) {
ret = pin_user_pages_fast(obj->userptr.ptr + pinned * PAGE_SIZE,
num_pages - pinned, gup_flags,
&pvec[pinned]);
if (ret < 0)
goto out;
pinned += ret;
}
ret = 0;
spin_lock(&i915->mm.notifier_lock);
if (mmu_interval_read_retry(&obj->userptr.notifier,
!obj->userptr.page_ref ? notifier_seq :
obj->userptr.notifier_seq)) {
ret = -EAGAIN;
goto out_unlock;
}
if (!obj->userptr.page_ref++) {
obj->userptr.pvec = pvec;
obj->userptr.notifier_seq = notifier_seq;
pvec = NULL;
}
out_unlock:
spin_unlock(&i915->mm.notifier_lock);
out:
if (pvec) {
unpin_user_pages(pvec, pinned);
kvfree(pvec);
}
return ret;
}
int i915_gem_object_userptr_submit_done(struct drm_i915_gem_object *obj)
{
if (mmu_interval_read_retry(&obj->userptr.notifier,
obj->userptr.notifier_seq)) {
/* We collided with the mmu notifier, need to retry */
return -EAGAIN;
}
return 0;
}
void i915_gem_object_userptr_submit_fini(struct drm_i915_gem_object *obj)
{
i915_gem_object_userptr_drop_ref(obj);
}
int i915_gem_object_userptr_validate(struct drm_i915_gem_object *obj)
{
int err;
err = i915_gem_object_userptr_submit_init(obj);
if (err)
return err;
err = i915_gem_object_lock_interruptible(obj, NULL);
if (!err) {
/*
* Since we only check validity, not use the pages,
* it doesn't matter if we collide with the mmu notifier,
* and -EAGAIN handling is not required.
*/
err = i915_gem_object_pin_pages(obj);
if (!err)
i915_gem_object_unpin_pages(obj);
i915_gem_object_unlock(obj);
}
i915_gem_object_userptr_submit_fini(obj);
return err;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
}
static void
i915_gem_userptr_release(struct drm_i915_gem_object *obj)
{
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
GEM_WARN_ON(obj->userptr.page_ref);
mmu_interval_notifier_remove(&obj->userptr.notifier);
obj->userptr.notifier.mm = NULL;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
}
static int
i915_gem_userptr_dmabuf_export(struct drm_i915_gem_object *obj)
{
drm_dbg(obj->base.dev, "Exporting userptr no longer allowed\n");
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
return -EINVAL;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
}
static int
i915_gem_userptr_pwrite(struct drm_i915_gem_object *obj,
const struct drm_i915_gem_pwrite *args)
{
drm_dbg(obj->base.dev, "pwrite to userptr no longer allowed\n");
return -EINVAL;
}
static int
i915_gem_userptr_pread(struct drm_i915_gem_object *obj,
const struct drm_i915_gem_pread *args)
{
drm_dbg(obj->base.dev, "pread from userptr no longer allowed\n");
return -EINVAL;
}
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
static const struct drm_i915_gem_object_ops i915_gem_userptr_ops = {
.name = "i915_gem_object_userptr",
.flags = I915_GEM_OBJECT_IS_SHRINKABLE |
I915_GEM_OBJECT_NO_MMAP |
I915_GEM_OBJECT_IS_PROXY,
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
.get_pages = i915_gem_userptr_get_pages,
.put_pages = i915_gem_userptr_put_pages,
.dmabuf_export = i915_gem_userptr_dmabuf_export,
.pwrite = i915_gem_userptr_pwrite,
.pread = i915_gem_userptr_pread,
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
.release = i915_gem_userptr_release,
};
#endif
/*
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
* Creates a new mm object that wraps some normal memory from the process
* context - user memory.
*
* We impose several restrictions upon the memory being mapped
* into the GPU.
* 1. It must be page aligned (both start/end addresses, i.e ptr and size).
* 2. It must be normal system memory, not a pointer into another map of IO
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
* space (e.g. it must not be a GTT mmapping of another object).
* 3. We only allow a bo as large as we could in theory map into the GTT,
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
* that is we limit the size to the total size of the GTT.
* 4. The bo is marked as being snoopable. The backing pages are left
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
* accessible directly by the CPU, but reads and writes by the GPU may
* incur the cost of a snoop (unless you have an LLC architecture).
*
* Synchronisation between multiple users and the GPU is left to userspace
* through the normal set-domain-ioctl. The kernel will enforce that the
* GPU relinquishes the VMA before it is returned back to the system
* i.e. upon free(), munmap() or process termination. However, the userspace
* malloc() library may not immediately relinquish the VMA after free() and
* instead reuse it whilst the GPU is still reading and writing to the VMA.
* Caveat emptor.
*
* Also note, that the object created here is not currently a "first class"
* object, in that several ioctls are banned. These are the CPU access
* ioctls: mmap(), pwrite and pread. In practice, you are expected to use
* direct access via your pointer rather than use those ioctls. Another
* restriction is that we do not allow userptr surfaces to be pinned to the
* hardware and so we reject any attempt to create a framebuffer out of a
* userptr.
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
*
* If you think this is a good interface to use to pass GPU memory between
* drivers, please use dma-buf instead. In fact, wherever possible use
* dma-buf instead.
*/
int
i915_gem_userptr_ioctl(struct drm_device *dev,
void *data,
struct drm_file *file)
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
{
static struct lock_class_key __maybe_unused lock_class;
struct drm_i915_private *dev_priv = to_i915(dev);
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
struct drm_i915_gem_userptr *args = data;
struct drm_i915_gem_object __maybe_unused *obj;
int __maybe_unused ret;
u32 __maybe_unused handle;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
if (!HAS_LLC(dev_priv) && !HAS_SNOOP(dev_priv)) {
/* We cannot support coherent userptr objects on hw without
* LLC and broken snooping.
*/
return -ENODEV;
}
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
if (args->flags & ~(I915_USERPTR_READ_ONLY |
I915_USERPTR_UNSYNCHRONIZED))
return -EINVAL;
if (i915_gem_object_size_2big(args->user_size))
return -E2BIG;
if (!args->user_size)
return -EINVAL;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
if (offset_in_page(args->user_ptr | args->user_size))
return -EINVAL;
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((char __user *)(unsigned long)args->user_ptr, args->user_size))
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
return -EFAULT;
if (args->flags & I915_USERPTR_UNSYNCHRONIZED)
return -ENODEV;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
if (args->flags & I915_USERPTR_READ_ONLY) {
/*
* On almost all of the older hw, we cannot tell the GPU that
* a page is readonly.
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
*/
if (!dev_priv->gt.vm->has_read_only)
return -ENODEV;
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
}
#ifdef CONFIG_MMU_NOTIFIER
obj = i915_gem_object_alloc();
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
if (obj == NULL)
return -ENOMEM;
drm_gem_private_object_init(dev, &obj->base, args->user_size);
i915_gem_object_init(obj, &i915_gem_userptr_ops, &lock_class,
I915_BO_ALLOC_STRUCT_PAGE);
obj->read_domains = I915_GEM_DOMAIN_CPU;
obj->write_domain = I915_GEM_DOMAIN_CPU;
drm/i915: Split obj->cache_coherent to track r/w Another month, another story in the cache coherency saga. This time, we come to the realisation that i915_gem_object_is_coherent() has been reporting whether we can read from the target without requiring a cache invalidate; but we were using it in places for testing whether we could write into the object without requiring a cache flush. So split the tracking into two, one to decide before reads, one after writes. See commit e27ab73d17ef ("drm/i915: Mark CPU cache as dirty on every transition for CPU writes") for the previous entry in this saga. v2: Be verbose v3: Remove unused function (i915_gem_object_is_coherent) v4: Fix inverted coherency check prior to execbuf (from v2) v5: Add comment for nasty code where we are optimising on gcc's behalf. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101109 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101555 Testcase: igt/kms_mmap_write_crc Testcase: igt/kms_pwrite_crc Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dongwon Kim <dongwon.kim@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811111116.10373-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-08-11 11:11:16 +00:00
i915_gem_object_set_cache_coherency(obj, I915_CACHE_LLC);
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
obj->userptr.ptr = args->user_ptr;
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
obj->userptr.notifier_seq = ULONG_MAX;
if (args->flags & I915_USERPTR_READ_ONLY)
i915_gem_object_set_readonly(obj);
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
/* And keep a pointer to the current->mm for resolving the user pages
* at binding. This means that we need to hook into the mmu_notifier
* in order to detect if the mmu is destroyed.
*/
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
ret = i915_gem_userptr_init__mmu_notifier(obj);
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
if (ret == 0)
ret = drm_gem_handle_create(file, &obj->base, &handle);
/* drop reference from allocate - handle holds it now */
i915_gem_object_put(obj);
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
if (ret)
return ret;
args->handle = handle;
return 0;
#else
return -ENODEV;
#endif
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
}
int i915_gem_init_userptr(struct drm_i915_private *dev_priv)
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
{
#ifdef CONFIG_MMU_NOTIFIER
drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7. Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
2021-03-23 15:50:05 +00:00
spin_lock_init(&dev_priv->mm.notifier_lock);
#endif
return 0;
}
void i915_gem_cleanup_userptr(struct drm_i915_private *dev_priv)
{
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 13:22:37 +00:00
}