linux/drivers/gpu/drm/i915/display/intel_dp_link_training.c

801 lines
23 KiB
C
Raw Normal View History

/*
* Copyright © 2008-2015 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#include "intel_display_types.h"
#include "intel_dp.h"
#include "intel_dp_link_training.h"
static void
intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE])
{
DRM_DEBUG_KMS("ln0_1:0x%x ln2_3:0x%x align:0x%x sink:0x%x adj_req0_1:0x%x adj_req2_3:0x%x",
link_status[0], link_status[1], link_status[2],
link_status[3], link_status[4], link_status[5]);
}
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
static int intel_dp_lttpr_count(struct intel_dp *intel_dp)
{
int count = drm_dp_lttpr_count(intel_dp->lttpr_common_caps);
/*
* Pretend no LTTPRs in case of LTTPR detection error, or
* if too many (>8) LTTPRs are detected. This translates to link
* training in transparent mode.
*/
return count <= 0 ? 0 : count;
}
static void intel_dp_reset_lttpr_count(struct intel_dp *intel_dp)
{
intel_dp->lttpr_common_caps[DP_PHY_REPEATER_CNT -
DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV] = 0;
}
static const char *intel_dp_phy_name(enum drm_dp_phy dp_phy,
char *buf, size_t buf_size)
{
if (dp_phy == DP_PHY_DPRX)
snprintf(buf, buf_size, "DPRX");
else
snprintf(buf, buf_size, "LTTPR %d", dp_phy - DP_PHY_LTTPR1 + 1);
return buf;
}
static u8 *intel_dp_lttpr_phy_caps(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
return intel_dp->lttpr_phy_caps[dp_phy - DP_PHY_LTTPR1];
}
static void intel_dp_read_lttpr_phy_caps(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy);
char phy_name[10];
intel_dp_phy_name(dp_phy, phy_name, sizeof(phy_name));
if (drm_dp_read_lttpr_phy_caps(&intel_dp->aux, dp_phy, phy_caps) < 0) {
drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
"failed to read the PHY caps for %s\n",
phy_name);
return;
}
drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
"%s PHY capabilities: %*ph\n",
phy_name,
(int)sizeof(intel_dp->lttpr_phy_caps[0]),
phy_caps);
}
static bool intel_dp_read_lttpr_common_caps(struct intel_dp *intel_dp)
{
if (drm_dp_read_lttpr_common_caps(&intel_dp->aux,
intel_dp->lttpr_common_caps) < 0) {
memset(intel_dp->lttpr_common_caps, 0,
sizeof(intel_dp->lttpr_common_caps));
return false;
}
drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
"LTTPR common capabilities: %*ph\n",
(int)sizeof(intel_dp->lttpr_common_caps),
intel_dp->lttpr_common_caps);
return true;
}
static bool
intel_dp_set_lttpr_transparent_mode(struct intel_dp *intel_dp, bool enable)
{
u8 val = enable ? DP_PHY_REPEATER_MODE_TRANSPARENT :
DP_PHY_REPEATER_MODE_NON_TRANSPARENT;
return drm_dp_dpcd_write(&intel_dp->aux, DP_PHY_REPEATER_MODE, &val, 1) == 1;
}
/**
* intel_dp_lttpr_init - detect LTTPRs and init the LTTPR link training mode
* @intel_dp: Intel DP struct
*
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
* Read the LTTPR common capabilities, switch to non-transparent link training
* mode if any is detected and read the PHY capabilities for all detected
* LTTPRs. In case of an LTTPR detection error or if the number of
* LTTPRs is more than is supported (8), fall back to the no-LTTPR,
* transparent mode link training mode.
*
* Returns:
* >0 if LTTPRs were detected and the non-transparent LT mode was set
* 0 if no LTTPRs or more than 8 LTTPRs were detected or in case of a
* detection failure and the transparent LT mode was set
*/
int intel_dp_lttpr_init(struct intel_dp *intel_dp)
{
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
int lttpr_count;
bool ret;
int i;
if (intel_dp_is_edp(intel_dp))
return 0;
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
ret = intel_dp_read_lttpr_common_caps(intel_dp);
/*
* See DP Standard v2.0 3.6.6.1. about the explicit disabling of
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
* non-transparent mode and the disable->enable non-transparent mode
* sequence.
*/
intel_dp_set_lttpr_transparent_mode(intel_dp, true);
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
if (!ret)
return 0;
lttpr_count = intel_dp_lttpr_count(intel_dp);
/*
* In case of unsupported number of LTTPRs or failing to switch to
* non-transparent mode fall-back to transparent link training mode,
* still taking into account any LTTPR common lane- rate/count limits.
*/
if (lttpr_count == 0)
return 0;
if (!intel_dp_set_lttpr_transparent_mode(intel_dp, false)) {
drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
"Switching to LTTPR non-transparent LT mode failed, fall-back to transparent mode\n");
intel_dp_set_lttpr_transparent_mode(intel_dp, true);
intel_dp_reset_lttpr_count(intel_dp);
return 0;
}
for (i = 0; i < lttpr_count; i++)
intel_dp_read_lttpr_phy_caps(intel_dp, DP_PHY_LTTPR(i));
return lttpr_count;
}
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
EXPORT_SYMBOL(intel_dp_lttpr_init);
static u8 dp_voltage_max(u8 preemph)
{
switch (preemph & DP_TRAIN_PRE_EMPHASIS_MASK) {
case DP_TRAIN_PRE_EMPH_LEVEL_0:
return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
case DP_TRAIN_PRE_EMPH_LEVEL_1:
return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
case DP_TRAIN_PRE_EMPH_LEVEL_2:
return DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
case DP_TRAIN_PRE_EMPH_LEVEL_3:
default:
return DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
}
}
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
static u8 intel_dp_lttpr_voltage_max(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
const u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy);
if (drm_dp_lttpr_voltage_swing_level_3_supported(phy_caps))
return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
else
return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
}
static u8 intel_dp_lttpr_preemph_max(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
const u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy);
if (drm_dp_lttpr_pre_emphasis_level_3_supported(phy_caps))
return DP_TRAIN_PRE_EMPH_LEVEL_3;
else
return DP_TRAIN_PRE_EMPH_LEVEL_2;
}
static bool
intel_dp_phy_is_downstream_of_source(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
int lttpr_count = intel_dp_lttpr_count(intel_dp);
drm_WARN_ON_ONCE(&i915->drm, lttpr_count == 0 && dp_phy != DP_PHY_DPRX);
return lttpr_count == 0 || dp_phy == DP_PHY_LTTPR(lttpr_count - 1);
}
static u8 intel_dp_phy_voltage_max(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state,
enum drm_dp_phy dp_phy)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
u8 voltage_max;
/*
* Get voltage_max from the DPTX_PHY (source or LTTPR) upstream from
* the DPRX_PHY we train.
*/
if (intel_dp_phy_is_downstream_of_source(intel_dp, dp_phy))
voltage_max = intel_dp->voltage_max(intel_dp, crtc_state);
else
voltage_max = intel_dp_lttpr_voltage_max(intel_dp, dp_phy + 1);
drm_WARN_ON_ONCE(&i915->drm,
voltage_max != DP_TRAIN_VOLTAGE_SWING_LEVEL_2 &&
voltage_max != DP_TRAIN_VOLTAGE_SWING_LEVEL_3);
return voltage_max;
}
static u8 intel_dp_phy_preemph_max(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
u8 preemph_max;
/*
* Get preemph_max from the DPTX_PHY (source or LTTPR) upstream from
* the DPRX_PHY we train.
*/
if (intel_dp_phy_is_downstream_of_source(intel_dp, dp_phy))
preemph_max = intel_dp->preemph_max(intel_dp);
else
preemph_max = intel_dp_lttpr_preemph_max(intel_dp, dp_phy + 1);
drm_WARN_ON_ONCE(&i915->drm,
preemph_max != DP_TRAIN_PRE_EMPH_LEVEL_2 &&
preemph_max != DP_TRAIN_PRE_EMPH_LEVEL_3);
return preemph_max;
}
void
intel_dp_get_adjust_train(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state,
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
enum drm_dp_phy dp_phy,
const u8 link_status[DP_LINK_STATUS_SIZE])
{
u8 v = 0;
u8 p = 0;
int lane;
u8 voltage_max;
u8 preemph_max;
for (lane = 0; lane < crtc_state->lane_count; lane++) {
v = max(v, drm_dp_get_adjust_request_voltage(link_status, lane));
p = max(p, drm_dp_get_adjust_request_pre_emphasis(link_status, lane));
}
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
preemph_max = intel_dp_phy_preemph_max(intel_dp, dp_phy);
if (p >= preemph_max)
p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
v = min(v, dp_voltage_max(p));
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
voltage_max = intel_dp_phy_voltage_max(intel_dp, crtc_state, dp_phy);
if (v >= voltage_max)
v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
for (lane = 0; lane < 4; lane++)
intel_dp->train_set[lane] = v | p;
}
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
static int intel_dp_training_pattern_set_reg(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
return dp_phy == DP_PHY_DPRX ?
DP_TRAINING_PATTERN_SET :
DP_TRAINING_PATTERN_SET_PHY_REPEATER(dp_phy);
}
static bool
intel_dp_set_link_train(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state,
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
enum drm_dp_phy dp_phy,
u8 dp_train_pat)
{
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
int reg = intel_dp_training_pattern_set_reg(intel_dp, dp_phy);
u8 buf[sizeof(intel_dp->train_set) + 1];
int len;
intel_dp_program_link_training_pattern(intel_dp, crtc_state,
dp_train_pat);
buf[0] = dp_train_pat;
/* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */
memcpy(buf + 1, intel_dp->train_set, crtc_state->lane_count);
len = crtc_state->lane_count + 1;
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
return drm_dp_dpcd_write(&intel_dp->aux, reg, buf, len) == len;
}
static bool
intel_dp_reset_link_train(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state,
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
enum drm_dp_phy dp_phy,
u8 dp_train_pat)
{
memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
intel_dp_set_signal_levels(intel_dp, crtc_state);
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
return intel_dp_set_link_train(intel_dp, crtc_state, dp_phy, dp_train_pat);
}
static bool
intel_dp_update_link_train(struct intel_dp *intel_dp,
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
const struct intel_crtc_state *crtc_state,
enum drm_dp_phy dp_phy)
{
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
int reg = dp_phy == DP_PHY_DPRX ?
DP_TRAINING_LANE0_SET :
DP_TRAINING_LANE0_SET_PHY_REPEATER(dp_phy);
int ret;
intel_dp_set_signal_levels(intel_dp, crtc_state);
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
ret = drm_dp_dpcd_write(&intel_dp->aux, reg,
intel_dp->train_set, crtc_state->lane_count);
return ret == crtc_state->lane_count;
}
static bool intel_dp_link_max_vswing_reached(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
int lane;
for (lane = 0; lane < crtc_state->lane_count; lane++)
if ((intel_dp->train_set[lane] &
DP_TRAIN_MAX_SWING_REACHED) == 0)
return false;
return true;
}
/*
* Prepare link training by configuring the link parameters. On DDI platforms
* also enable the port here.
*/
static bool
intel_dp_prepare_link_train(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
u8 link_config[2];
u8 link_bw, rate_select;
if (intel_dp->prepare_link_retrain)
intel_dp->prepare_link_retrain(intel_dp, crtc_state);
intel_dp_compute_rate(intel_dp, crtc_state->port_clock,
&link_bw, &rate_select);
if (link_bw)
drm_dbg_kms(&i915->drm,
"Using LINK_BW_SET value %02x\n", link_bw);
else
drm_dbg_kms(&i915->drm,
"Using LINK_RATE_SET value %02x\n", rate_select);
/* Write the link configuration data */
link_config[0] = link_bw;
link_config[1] = crtc_state->lane_count;
if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
drm/i915/dp: generate and cache sink rate array for all DP, not just eDP 1.4 There is some conflation related to sink rates, making this change more complicated than it would otherwise have to be. There are three changes here that are rather difficult to split up: 1) Use the intel_dp->sink_rates array for all DP, not just eDP 1.4. We initialize it from DPCD on eDP 1.4 like before, but generate it based on DP_MAX_LINK_RATE on others. This reduces code complexity when we need to use the sink rates; they are all always in the sink_rates array. 2) Update the sink rate array whenever we read DPCD, and use the information from there. This increases code readability when we need the sink rates. 3) Disentangle fallback rate limiting from sink rates. In the code, the max rate is a dynamic property of the *link*, not of the *sink*. Do the limiting after intersecting the source and sink rates, which are static properties of the devices. This paves the way for follow-up refactoring that I've refrained from doing here to keep this change as simple as it possibly can. v2: introduce use_rate_select and handle non-confirming eDP (Ville) v3: don't clobber cached eDP rates on short pulse (Ville) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/071bad76467f8ab2e73f3f61ad52d5a468004c71.1490712890.git.jani.nikula@intel.com
2017-03-28 14:59:05 +00:00
/* eDP 1.4 rate select method. */
if (!link_bw)
drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET,
&rate_select, 1);
link_config[0] = 0;
link_config[1] = DP_SET_ANSI_8B10B;
drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2);
intel_dp->DP |= DP_PORT_EN;
return true;
}
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
static void intel_dp_link_training_clock_recovery_delay(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
if (dp_phy == DP_PHY_DPRX)
drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd);
else
drm_dp_lttpr_link_train_clock_recovery_delay();
}
/*
* Perform the link training clock recovery phase on the given DP PHY using
* training pattern 1.
*/
static bool
intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp,
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
const struct intel_crtc_state *crtc_state,
enum drm_dp_phy dp_phy)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
u8 voltage;
int voltage_tries, cr_tries, max_cr_tries;
bool max_vswing_reached = false;
/* clock recovery */
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
if (!intel_dp_reset_link_train(intel_dp, crtc_state, dp_phy,
DP_TRAINING_PATTERN_1 |
DP_LINK_SCRAMBLING_DISABLE)) {
drm_err(&i915->drm, "failed to enable link training\n");
return false;
}
drm/i915/dp: Limit link training clock recovery loop Limit the link training clock recovery loop to 10 attempts at LANEx_CR_DONE per DP 1.4 spec section 3.5.1.2.2 and 80 attempts for pre-DP 1.4 (4 voltage levels x 4 preemphasis levels x x 5 identical voltages tries). Some faulty USB-C MST hubs can cause us to get stuck in this loop indefinitely requesting something like: voltage swing: 0, pre-emphasis level: 2 voltage swing: 1, pre-emphasis level: 2 voltage swing: 0, pre-emphasis level: 3 over and over so max_vswing would never be reached, drm_dp_clock_recovery_ok() would never return true and voltage_tries would always get reset to 1. The driver sends those values to the hub but the hub keeps requesting new values every time. Changes in v2: - updated commit message (DK, Manasi) - defined DP_DP14_MAX_CR_TRIES (Marc) - made the loop iterate for max 10 times (Rodrigo, Marc) Changes in v3: - changed error message to use DP_DP14_MAX_CR_TRIES Changes in v4: - Updated the title to reflect the change - Updated the commit message - Added 80 attempts for pre-DP 1.4 devices Changes in v5: - Removed DP_DP14_MAX_CR_TRIES from drm v6: Updated comment to match kernel style (Rodrigo) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Marc Herbert <marc.herbert@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720214413.29506-1-rodrigo.vivi@intel.com
2018-07-20 21:44:12 +00:00
/*
* The DP 1.4 spec defines the max clock recovery retries value
* as 10 but for pre-DP 1.4 devices we set a very tolerant
* retry limit of 80 (4 voltage levels x 4 preemphasis levels x
* x 5 identical voltage retries). Since the previous specs didn't
* define a limit and created the possibility of an infinite loop
* we want to prevent any sync from triggering that corner case.
drm/i915/dp: Limit link training clock recovery loop Limit the link training clock recovery loop to 10 attempts at LANEx_CR_DONE per DP 1.4 spec section 3.5.1.2.2 and 80 attempts for pre-DP 1.4 (4 voltage levels x 4 preemphasis levels x x 5 identical voltages tries). Some faulty USB-C MST hubs can cause us to get stuck in this loop indefinitely requesting something like: voltage swing: 0, pre-emphasis level: 2 voltage swing: 1, pre-emphasis level: 2 voltage swing: 0, pre-emphasis level: 3 over and over so max_vswing would never be reached, drm_dp_clock_recovery_ok() would never return true and voltage_tries would always get reset to 1. The driver sends those values to the hub but the hub keeps requesting new values every time. Changes in v2: - updated commit message (DK, Manasi) - defined DP_DP14_MAX_CR_TRIES (Marc) - made the loop iterate for max 10 times (Rodrigo, Marc) Changes in v3: - changed error message to use DP_DP14_MAX_CR_TRIES Changes in v4: - Updated the title to reflect the change - Updated the commit message - Added 80 attempts for pre-DP 1.4 devices Changes in v5: - Removed DP_DP14_MAX_CR_TRIES from drm v6: Updated comment to match kernel style (Rodrigo) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Marc Herbert <marc.herbert@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720214413.29506-1-rodrigo.vivi@intel.com
2018-07-20 21:44:12 +00:00
*/
if (intel_dp->dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14)
max_cr_tries = 10;
else
max_cr_tries = 80;
voltage_tries = 1;
drm/i915/dp: Limit link training clock recovery loop Limit the link training clock recovery loop to 10 attempts at LANEx_CR_DONE per DP 1.4 spec section 3.5.1.2.2 and 80 attempts for pre-DP 1.4 (4 voltage levels x 4 preemphasis levels x x 5 identical voltages tries). Some faulty USB-C MST hubs can cause us to get stuck in this loop indefinitely requesting something like: voltage swing: 0, pre-emphasis level: 2 voltage swing: 1, pre-emphasis level: 2 voltage swing: 0, pre-emphasis level: 3 over and over so max_vswing would never be reached, drm_dp_clock_recovery_ok() would never return true and voltage_tries would always get reset to 1. The driver sends those values to the hub but the hub keeps requesting new values every time. Changes in v2: - updated commit message (DK, Manasi) - defined DP_DP14_MAX_CR_TRIES (Marc) - made the loop iterate for max 10 times (Rodrigo, Marc) Changes in v3: - changed error message to use DP_DP14_MAX_CR_TRIES Changes in v4: - Updated the title to reflect the change - Updated the commit message - Added 80 attempts for pre-DP 1.4 devices Changes in v5: - Removed DP_DP14_MAX_CR_TRIES from drm v6: Updated comment to match kernel style (Rodrigo) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Marc Herbert <marc.herbert@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720214413.29506-1-rodrigo.vivi@intel.com
2018-07-20 21:44:12 +00:00
for (cr_tries = 0; cr_tries < max_cr_tries; ++cr_tries) {
u8 link_status[DP_LINK_STATUS_SIZE];
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
intel_dp_link_training_clock_recovery_delay(intel_dp, dp_phy);
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, dp_phy,
link_status) < 0) {
drm_err(&i915->drm, "failed to get link status\n");
return false;
}
if (drm_dp_clock_recovery_ok(link_status, crtc_state->lane_count)) {
drm_dbg_kms(&i915->drm, "clock recovery OK\n");
return true;
}
if (voltage_tries == 5) {
drm_dbg_kms(&i915->drm,
"Same voltage tried 5 times\n");
return false;
}
if (max_vswing_reached) {
drm_dbg_kms(&i915->drm, "Max Voltage Swing reached\n");
return false;
}
voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
/* Update training set as requested by target */
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
intel_dp_get_adjust_train(intel_dp, crtc_state, dp_phy,
link_status);
if (!intel_dp_update_link_train(intel_dp, crtc_state, dp_phy)) {
drm_err(&i915->drm,
"failed to update link training\n");
return false;
}
if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) ==
voltage)
++voltage_tries;
else
voltage_tries = 1;
if (intel_dp_link_max_vswing_reached(intel_dp, crtc_state))
max_vswing_reached = true;
}
drm_err(&i915->drm,
"Failed clock recovery %d times, giving up!\n", max_cr_tries);
drm/i915/dp: Limit link training clock recovery loop Limit the link training clock recovery loop to 10 attempts at LANEx_CR_DONE per DP 1.4 spec section 3.5.1.2.2 and 80 attempts for pre-DP 1.4 (4 voltage levels x 4 preemphasis levels x x 5 identical voltages tries). Some faulty USB-C MST hubs can cause us to get stuck in this loop indefinitely requesting something like: voltage swing: 0, pre-emphasis level: 2 voltage swing: 1, pre-emphasis level: 2 voltage swing: 0, pre-emphasis level: 3 over and over so max_vswing would never be reached, drm_dp_clock_recovery_ok() would never return true and voltage_tries would always get reset to 1. The driver sends those values to the hub but the hub keeps requesting new values every time. Changes in v2: - updated commit message (DK, Manasi) - defined DP_DP14_MAX_CR_TRIES (Marc) - made the loop iterate for max 10 times (Rodrigo, Marc) Changes in v3: - changed error message to use DP_DP14_MAX_CR_TRIES Changes in v4: - Updated the title to reflect the change - Updated the commit message - Added 80 attempts for pre-DP 1.4 devices Changes in v5: - Removed DP_DP14_MAX_CR_TRIES from drm v6: Updated comment to match kernel style (Rodrigo) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Marc Herbert <marc.herbert@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720214413.29506-1-rodrigo.vivi@intel.com
2018-07-20 21:44:12 +00:00
return false;
}
/*
* Pick training pattern for channel equalization. Training pattern 4 for HBR3
* or for 1.4 devices that support it, training Pattern 3 for HBR2
* or 1.2 devices that support it, Training Pattern 2 otherwise.
*/
static u32 intel_dp_training_pattern(struct intel_dp *intel_dp,
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
const struct intel_crtc_state *crtc_state,
enum drm_dp_phy dp_phy)
{
bool source_tps3, sink_tps3, source_tps4, sink_tps4;
/*
* Intel platforms that support HBR3 also support TPS4. It is mandatory
* for all downstream devices that support HBR3. There are no known eDP
* panels that support TPS4 as of Feb 2018 as per VESA eDP_v1.4b_E1
* specification.
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
* LTTPRs must support TPS4.
*/
source_tps4 = intel_dp_source_supports_hbr3(intel_dp);
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
sink_tps4 = dp_phy != DP_PHY_DPRX ||
drm_dp_tps4_supported(intel_dp->dpcd);
if (source_tps4 && sink_tps4) {
return DP_TRAINING_PATTERN_4;
} else if (crtc_state->port_clock == 810000) {
if (!source_tps4)
drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
"8.1 Gbps link rate without source HBR3/TPS4 support\n");
if (!sink_tps4)
drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
"8.1 Gbps link rate without sink TPS4 support\n");
}
/*
* Intel platforms that support HBR2 also support TPS3. TPS3 support is
* also mandatory for downstream devices that support HBR2. However, not
* all sinks follow the spec.
*/
source_tps3 = intel_dp_source_supports_hbr2(intel_dp);
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
sink_tps3 = dp_phy != DP_PHY_DPRX ||
drm_dp_tps3_supported(intel_dp->dpcd);
if (source_tps3 && sink_tps3) {
return DP_TRAINING_PATTERN_3;
} else if (crtc_state->port_clock >= 540000) {
if (!source_tps3)
drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
">=5.4/6.48 Gbps link rate without source HBR2/TPS3 support\n");
if (!sink_tps3)
drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
">=5.4/6.48 Gbps link rate without sink TPS3 support\n");
}
return DP_TRAINING_PATTERN_2;
}
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
static void
intel_dp_link_training_channel_equalization_delay(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
if (dp_phy == DP_PHY_DPRX) {
drm_dp_link_train_channel_eq_delay(intel_dp->dpcd);
} else {
const u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy);
drm_dp_lttpr_link_train_channel_eq_delay(phy_caps);
}
}
/*
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
* Perform the link training channel equalization phase on the given DP PHY
* using one of training pattern 2, 3 or 4 depending on the source and
* sink capabilities.
*/
static bool
intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp,
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
const struct intel_crtc_state *crtc_state,
enum drm_dp_phy dp_phy)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
int tries;
u32 training_pattern;
u8 link_status[DP_LINK_STATUS_SIZE];
bool channel_eq = false;
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
training_pattern = intel_dp_training_pattern(intel_dp, crtc_state, dp_phy);
/* Scrambling is disabled for TPS2/3 and enabled for TPS4 */
if (training_pattern != DP_TRAINING_PATTERN_4)
training_pattern |= DP_LINK_SCRAMBLING_DISABLE;
/* channel equalization */
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
if (!intel_dp_set_link_train(intel_dp, crtc_state, dp_phy,
training_pattern)) {
drm_err(&i915->drm, "failed to start channel equalization\n");
return false;
}
for (tries = 0; tries < 5; tries++) {
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
intel_dp_link_training_channel_equalization_delay(intel_dp,
dp_phy);
if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, dp_phy,
link_status) < 0) {
drm_err(&i915->drm,
"failed to get link status\n");
break;
}
/* Make sure clock is still ok */
if (!drm_dp_clock_recovery_ok(link_status,
crtc_state->lane_count)) {
intel_dp_dump_link_status(link_status);
drm_dbg_kms(&i915->drm,
"Clock recovery check failed, cannot "
"continue channel equalization\n");
break;
}
if (drm_dp_channel_eq_ok(link_status,
crtc_state->lane_count)) {
channel_eq = true;
drm_dbg_kms(&i915->drm, "Channel EQ done. DP Training "
"successful\n");
break;
}
/* Update training set as requested by target */
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
intel_dp_get_adjust_train(intel_dp, crtc_state, dp_phy,
link_status);
if (!intel_dp_update_link_train(intel_dp, crtc_state, dp_phy)) {
drm_err(&i915->drm,
"failed to update link training\n");
break;
}
}
/* Try 5 times, else fail and try at lower BW */
if (tries == 5) {
intel_dp_dump_link_status(link_status);
drm_dbg_kms(&i915->drm,
"Channel equalization failed 5 times\n");
}
return channel_eq;
}
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
static bool intel_dp_disable_dpcd_training_pattern(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
int reg = intel_dp_training_pattern_set_reg(intel_dp, dp_phy);
u8 val = DP_TRAINING_PATTERN_DISABLE;
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
return drm_dp_dpcd_write(&intel_dp->aux, reg, &val, 1) == 1;
}
/**
* intel_dp_stop_link_train - stop link training
* @intel_dp: DP struct
* @crtc_state: state for CRTC attached to the encoder
*
* Stop the link training of the @intel_dp port, disabling the test pattern
* symbol generation on the port and disabling the training pattern in
* the sink's DPCD.
*
* What symbols are output on the port after this point is
* platform specific: On DDI/VLV/CHV platforms it will be the idle pattern
* with the pipe being disabled, on older platforms it's HW specific if/how an
* idle pattern is generated, as the pipe is already enabled here for those.
*
* This function must be called after intel_dp_start_link_train().
*/
void intel_dp_stop_link_train(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
intel_dp->link_trained = true;
intel_dp_program_link_training_pattern(intel_dp,
crtc_state,
DP_TRAINING_PATTERN_DISABLE);
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
intel_dp_disable_dpcd_training_pattern(intel_dp, DP_PHY_DPRX);
}
static bool
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
intel_dp_link_train_phy(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state,
enum drm_dp_phy dp_phy)
{
drm/i915: Implement Link Rate fallback on Link training failure If link training at a link rate optimal for a particular mode fails during modeset's atomic commit phase, then we let the modeset complete and then retry. We save the link rate value at which link training failed, update the link status property to "BAD" and use a lower link rate to prune the modes. It will redo the modeset on the current mode at lower link rate or if the current mode gets pruned due to lower link constraints then, it will send a hotplug uevent for userspace to handle it. This is also required to pass DP CTS tests 4.3.1.3, 4.3.1.4, 4.3.1.6. This patch is a resend of the original commit id (233ce881dd91fb "drm/i915: Implement Link Rate fallback on Link training failure") which got reverted in this commit id (afc1ebf4562a14 Revert "drm/i915: Implement Link Rate fallback on Link training failure") due to CI failures. After investigating the CI failures it was found that these were essentially the failures which were always there but hidden because they used to be DRM_DEBUG_KMS messages for link failures so never got caught by CI. But now this patch actually throws DRM_ERROR if the link training fails at RBR and 1 lane. So it caught these link train failures. There were two failures: 1. On SKL 6700k this was because the machine in CI lab is a SKL desktop without eDP on Port A. But our VBT initialization code in the driver writes VBT defaults in a way that it always sets DP flag on Port A and this does not get cleared after parsing the VBT outputs. This has been fixed in commit id (bb1d132935c2f8 "drm/i915/vbt: split out defaults that are set when there is no VBT) and (665788572c6410b "drm/i915/vbt: don't propagate errors from intel_bios_init()) 2. On ILK-650 desktop - This was happening because of a bad monitor desktop combination. I switched the monitor in the CI lab and that helped get rid of the link failures on ILK system. v10: * Rebase on drm-tip and resend after revert v9: * Use the trimmed max values of link rate/lane count based on link train fallback (Daniel Vetter) v8: * Set link_status to BAD first and then call mode_valid (Jani Nikula) v7: Remove the redundant variable in previous patch itself v6: * Obtain link rate index from fallback_link_rate using the helper intel_dp_link_rate_index (Jani Nikula) * Include fallback within intel_dp_start_link_train (Jani Nikula) v5: * Move set link status to drm core (Daniel Vetter, Jani Nikula) v4: * Add fallback support for non DDI platforms too * Set connector->link status inside set_link_status function (Jani Nikula) v3: * Set link status property to BAd unconditionally (Jani Nikula) * Dont use two separate variables link_train_failed and link_status to indicate same thing (Jani Nikula) v2: * Squashed a few patches (Jani Nikula) Acked-by: Tony Cheng <tony.cheng@amd.com> Acked-by: Harry Wentland <Harry.wentland@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/16ca48b1e74c618929245e9a085b9e3483c3a16d.1491485983.git.jani.nikula@intel.com
2017-04-06 13:44:19 +00:00
struct intel_connector *intel_connector = intel_dp->attached_connector;
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
char phy_name[10];
bool ret = false;
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
if (!intel_dp_link_training_clock_recovery(intel_dp, crtc_state, dp_phy))
goto out;
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
if (!intel_dp_link_training_channel_equalization(intel_dp, crtc_state, dp_phy))
goto out;
drm/i915: Implement Link Rate fallback on Link training failure If link training at a link rate optimal for a particular mode fails during modeset's atomic commit phase, then we let the modeset complete and then retry. We save the link rate value at which link training failed, update the link status property to "BAD" and use a lower link rate to prune the modes. It will redo the modeset on the current mode at lower link rate or if the current mode gets pruned due to lower link constraints then, it will send a hotplug uevent for userspace to handle it. This is also required to pass DP CTS tests 4.3.1.3, 4.3.1.4, 4.3.1.6. This patch is a resend of the original commit id (233ce881dd91fb "drm/i915: Implement Link Rate fallback on Link training failure") which got reverted in this commit id (afc1ebf4562a14 Revert "drm/i915: Implement Link Rate fallback on Link training failure") due to CI failures. After investigating the CI failures it was found that these were essentially the failures which were always there but hidden because they used to be DRM_DEBUG_KMS messages for link failures so never got caught by CI. But now this patch actually throws DRM_ERROR if the link training fails at RBR and 1 lane. So it caught these link train failures. There were two failures: 1. On SKL 6700k this was because the machine in CI lab is a SKL desktop without eDP on Port A. But our VBT initialization code in the driver writes VBT defaults in a way that it always sets DP flag on Port A and this does not get cleared after parsing the VBT outputs. This has been fixed in commit id (bb1d132935c2f8 "drm/i915/vbt: split out defaults that are set when there is no VBT) and (665788572c6410b "drm/i915/vbt: don't propagate errors from intel_bios_init()) 2. On ILK-650 desktop - This was happening because of a bad monitor desktop combination. I switched the monitor in the CI lab and that helped get rid of the link failures on ILK system. v10: * Rebase on drm-tip and resend after revert v9: * Use the trimmed max values of link rate/lane count based on link train fallback (Daniel Vetter) v8: * Set link_status to BAD first and then call mode_valid (Jani Nikula) v7: Remove the redundant variable in previous patch itself v6: * Obtain link rate index from fallback_link_rate using the helper intel_dp_link_rate_index (Jani Nikula) * Include fallback within intel_dp_start_link_train (Jani Nikula) v5: * Move set link status to drm core (Daniel Vetter, Jani Nikula) v4: * Add fallback support for non DDI platforms too * Set connector->link status inside set_link_status function (Jani Nikula) v3: * Set link status property to BAd unconditionally (Jani Nikula) * Dont use two separate variables link_train_failed and link_status to indicate same thing (Jani Nikula) v2: * Squashed a few patches (Jani Nikula) Acked-by: Tony Cheng <tony.cheng@amd.com> Acked-by: Harry Wentland <Harry.wentland@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/16ca48b1e74c618929245e9a085b9e3483c3a16d.1491485983.git.jani.nikula@intel.com
2017-04-06 13:44:19 +00:00
ret = true;
drm/i915: Implement Link Rate fallback on Link training failure If link training at a link rate optimal for a particular mode fails during modeset's atomic commit phase, then we let the modeset complete and then retry. We save the link rate value at which link training failed, update the link status property to "BAD" and use a lower link rate to prune the modes. It will redo the modeset on the current mode at lower link rate or if the current mode gets pruned due to lower link constraints then, it will send a hotplug uevent for userspace to handle it. This is also required to pass DP CTS tests 4.3.1.3, 4.3.1.4, 4.3.1.6. This patch is a resend of the original commit id (233ce881dd91fb "drm/i915: Implement Link Rate fallback on Link training failure") which got reverted in this commit id (afc1ebf4562a14 Revert "drm/i915: Implement Link Rate fallback on Link training failure") due to CI failures. After investigating the CI failures it was found that these were essentially the failures which were always there but hidden because they used to be DRM_DEBUG_KMS messages for link failures so never got caught by CI. But now this patch actually throws DRM_ERROR if the link training fails at RBR and 1 lane. So it caught these link train failures. There were two failures: 1. On SKL 6700k this was because the machine in CI lab is a SKL desktop without eDP on Port A. But our VBT initialization code in the driver writes VBT defaults in a way that it always sets DP flag on Port A and this does not get cleared after parsing the VBT outputs. This has been fixed in commit id (bb1d132935c2f8 "drm/i915/vbt: split out defaults that are set when there is no VBT) and (665788572c6410b "drm/i915/vbt: don't propagate errors from intel_bios_init()) 2. On ILK-650 desktop - This was happening because of a bad monitor desktop combination. I switched the monitor in the CI lab and that helped get rid of the link failures on ILK system. v10: * Rebase on drm-tip and resend after revert v9: * Use the trimmed max values of link rate/lane count based on link train fallback (Daniel Vetter) v8: * Set link_status to BAD first and then call mode_valid (Jani Nikula) v7: Remove the redundant variable in previous patch itself v6: * Obtain link rate index from fallback_link_rate using the helper intel_dp_link_rate_index (Jani Nikula) * Include fallback within intel_dp_start_link_train (Jani Nikula) v5: * Move set link status to drm core (Daniel Vetter, Jani Nikula) v4: * Add fallback support for non DDI platforms too * Set connector->link status inside set_link_status function (Jani Nikula) v3: * Set link status property to BAd unconditionally (Jani Nikula) * Dont use two separate variables link_train_failed and link_status to indicate same thing (Jani Nikula) v2: * Squashed a few patches (Jani Nikula) Acked-by: Tony Cheng <tony.cheng@amd.com> Acked-by: Harry Wentland <Harry.wentland@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/16ca48b1e74c618929245e9a085b9e3483c3a16d.1491485983.git.jani.nikula@intel.com
2017-04-06 13:44:19 +00:00
out:
drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
"[CONNECTOR:%d:%s] Link Training %s at link rate = %d, lane count = %d, at %s",
intel_connector->base.base.id,
intel_connector->base.name,
ret ? "passed" : "failed",
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
crtc_state->port_clock, crtc_state->lane_count,
intel_dp_phy_name(dp_phy, phy_name, sizeof(phy_name)));
drm/i915/display: Implement HOBL Hours Of Battery Life is a new GEN12+ power-saving feature that allows supported motherboards to use a special voltage swing table for eDP panels that uses less power. So here if supported by HW, OEM will set it in VBT and i915 will try to train link with HOBL vswing table if link training fails it fall back to the original table. intel_ddi_dp_preemph_max() was optimized to only check the HOBL flag instead of do something like is done in intel_ddi_dp_voltage_max() because it is only called after the first entry of the voltage swing table was loaded so the HOBL flag is valid at that point. v3: - removed a few parameters of icl_ddi_combo_vswing_program() that can be taken from encoder v4: - using the HOBL vswing table until training fails completely (Ville) v5: - not reducing lane or link rate when link training fails with HOBL active - duplicated the HOBL voltage swing entry to match DP spec requirement v6: - removed the optional VS 3 & pre-emp 0 from HOBL table - changed from u8:1 to bool to store hobl_failed/active BSpec: 49291 BSpec: 49399 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200715175637.33763-1-jose.souza@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-07-15 17:56:37 +00:00
return ret;
}
static void intel_dp_schedule_fallback_link_training(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
struct intel_connector *intel_connector = intel_dp->attached_connector;
drm/i915/display: Implement HOBL Hours Of Battery Life is a new GEN12+ power-saving feature that allows supported motherboards to use a special voltage swing table for eDP panels that uses less power. So here if supported by HW, OEM will set it in VBT and i915 will try to train link with HOBL vswing table if link training fails it fall back to the original table. intel_ddi_dp_preemph_max() was optimized to only check the HOBL flag instead of do something like is done in intel_ddi_dp_voltage_max() because it is only called after the first entry of the voltage swing table was loaded so the HOBL flag is valid at that point. v3: - removed a few parameters of icl_ddi_combo_vswing_program() that can be taken from encoder v4: - using the HOBL vswing table until training fails completely (Ville) v5: - not reducing lane or link rate when link training fails with HOBL active - duplicated the HOBL voltage swing entry to match DP spec requirement v6: - removed the optional VS 3 & pre-emp 0 from HOBL table - changed from u8:1 to bool to store hobl_failed/active BSpec: 49291 BSpec: 49399 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200715175637.33763-1-jose.souza@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-07-15 17:56:37 +00:00
if (intel_dp->hobl_active) {
drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
"Link Training failed with HOBL active, not enabling it from now on");
intel_dp->hobl_failed = true;
} else if (intel_dp_get_link_train_fallback_values(intel_dp,
crtc_state->port_clock,
crtc_state->lane_count)) {
drm/i915/display: Implement HOBL Hours Of Battery Life is a new GEN12+ power-saving feature that allows supported motherboards to use a special voltage swing table for eDP panels that uses less power. So here if supported by HW, OEM will set it in VBT and i915 will try to train link with HOBL vswing table if link training fails it fall back to the original table. intel_ddi_dp_preemph_max() was optimized to only check the HOBL flag instead of do something like is done in intel_ddi_dp_voltage_max() because it is only called after the first entry of the voltage swing table was loaded so the HOBL flag is valid at that point. v3: - removed a few parameters of icl_ddi_combo_vswing_program() that can be taken from encoder v4: - using the HOBL vswing table until training fails completely (Ville) v5: - not reducing lane or link rate when link training fails with HOBL active - duplicated the HOBL voltage swing entry to match DP spec requirement v6: - removed the optional VS 3 & pre-emp 0 from HOBL table - changed from u8:1 to bool to store hobl_failed/active BSpec: 49291 BSpec: 49399 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200715175637.33763-1-jose.souza@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-07-15 17:56:37 +00:00
return;
}
/* Schedule a Hotplug Uevent to userspace to start modeset */
schedule_work(&intel_connector->modeset_retry_work);
}
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
/* Perform the link training on all LTTPRs and the DPRX on a link. */
static bool
intel_dp_link_train_all_phys(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state,
int lttpr_count)
{
bool ret = true;
int i;
intel_dp_prepare_link_train(intel_dp, crtc_state);
for (i = lttpr_count - 1; i >= 0; i--) {
enum drm_dp_phy dp_phy = DP_PHY_LTTPR(i);
ret = intel_dp_link_train_phy(intel_dp, crtc_state, dp_phy);
intel_dp_disable_dpcd_training_pattern(intel_dp, dp_phy);
if (!ret)
break;
}
if (ret)
intel_dp_link_train_phy(intel_dp, crtc_state, DP_PHY_DPRX);
if (intel_dp->set_idle_link_train)
intel_dp->set_idle_link_train(intel_dp, crtc_state);
return ret;
}
/**
* intel_dp_start_link_train - start link training
* @intel_dp: DP struct
* @crtc_state: state for CRTC attached to the encoder
*
* Start the link training of the @intel_dp port, scheduling a fallback
* retraining with reduced link rate/lane parameters if the link training
* fails.
* After calling this function intel_dp_stop_link_train() must be called.
*/
void intel_dp_start_link_train(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
/*
* TODO: Reiniting LTTPRs here won't be needed once proper connector
* HW state readout is added.
*/
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
int lttpr_count = intel_dp_lttpr_init(intel_dp);
drm/i915: Switch to LTTPR non-transparent mode link training The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-07 17:09:17 +00:00
if (!intel_dp_link_train_all_phys(intel_dp, crtc_state, lttpr_count))
intel_dp_schedule_fallback_link_training(intel_dp, crtc_state);
}