linux/drivers/net/ethernet/marvell/prestera/prestera_main.c

665 lines
15 KiB
C
Raw Normal View History

net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
/* Copyright (c) 2019-2020 Marvell International Ltd. All rights reserved */
#include <linux/etherdevice.h>
#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdev_features.h>
#include <linux/of.h>
#include <linux/of_net.h>
#include "prestera.h"
#include "prestera_hw.h"
#include "prestera_rxtx.h"
#include "prestera_devlink.h"
#include "prestera_ethtool.h"
#include "prestera_switchdev.h"
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
#define PRESTERA_MTU_DEFAULT 1536
#define PRESTERA_STATS_DELAY_MS 1000
#define PRESTERA_MAC_ADDR_NUM_MAX 255
static struct workqueue_struct *prestera_wq;
int prestera_port_pvid_set(struct prestera_port *port, u16 vid)
{
enum prestera_accept_frm_type frm_type;
int err;
frm_type = PRESTERA_ACCEPT_FRAME_TYPE_TAGGED;
if (vid) {
err = prestera_hw_vlan_port_vid_set(port, vid);
if (err)
return err;
frm_type = PRESTERA_ACCEPT_FRAME_TYPE_ALL;
}
err = prestera_hw_port_accept_frm_type(port, frm_type);
if (err && frm_type == PRESTERA_ACCEPT_FRAME_TYPE_ALL)
prestera_hw_vlan_port_vid_set(port, port->pvid);
port->pvid = vid;
return 0;
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
struct prestera_port *prestera_port_find_by_hwid(struct prestera_switch *sw,
u32 dev_id, u32 hw_id)
{
struct prestera_port *port = NULL;
read_lock(&sw->port_list_lock);
list_for_each_entry(port, &sw->port_list, list) {
if (port->dev_id == dev_id && port->hw_id == hw_id)
break;
}
read_unlock(&sw->port_list_lock);
return port;
}
struct prestera_port *prestera_find_port(struct prestera_switch *sw, u32 id)
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
{
struct prestera_port *port = NULL;
read_lock(&sw->port_list_lock);
list_for_each_entry(port, &sw->port_list, list) {
if (port->id == id)
break;
}
read_unlock(&sw->port_list_lock);
return port;
}
static int prestera_port_open(struct net_device *dev)
{
struct prestera_port *port = netdev_priv(dev);
int err;
err = prestera_hw_port_state_set(port, true);
if (err)
return err;
netif_start_queue(dev);
return 0;
}
static int prestera_port_close(struct net_device *dev)
{
struct prestera_port *port = netdev_priv(dev);
netif_stop_queue(dev);
return prestera_hw_port_state_set(port, false);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
}
static netdev_tx_t prestera_port_xmit(struct sk_buff *skb,
struct net_device *dev)
{
return prestera_rxtx_xmit(netdev_priv(dev), skb);
}
static int prestera_is_valid_mac_addr(struct prestera_port *port, u8 *addr)
{
if (!is_valid_ether_addr(addr))
return -EADDRNOTAVAIL;
/* firmware requires that port's MAC address contains first 5 bytes
* of the base MAC address
*/
if (memcmp(port->sw->base_mac, addr, ETH_ALEN - 1))
return -EINVAL;
return 0;
}
static int prestera_port_set_mac_address(struct net_device *dev, void *p)
{
struct prestera_port *port = netdev_priv(dev);
struct sockaddr *addr = p;
int err;
err = prestera_is_valid_mac_addr(port, addr->sa_data);
if (err)
return err;
err = prestera_hw_port_mac_set(port, addr->sa_data);
if (err)
return err;
ether_addr_copy(dev->dev_addr, addr->sa_data);
return 0;
}
static int prestera_port_change_mtu(struct net_device *dev, int mtu)
{
struct prestera_port *port = netdev_priv(dev);
int err;
err = prestera_hw_port_mtu_set(port, mtu);
if (err)
return err;
dev->mtu = mtu;
return 0;
}
static void prestera_port_get_stats64(struct net_device *dev,
struct rtnl_link_stats64 *stats)
{
struct prestera_port *port = netdev_priv(dev);
struct prestera_port_stats *port_stats = &port->cached_hw_stats.stats;
stats->rx_packets = port_stats->broadcast_frames_received +
port_stats->multicast_frames_received +
port_stats->unicast_frames_received;
stats->tx_packets = port_stats->broadcast_frames_sent +
port_stats->multicast_frames_sent +
port_stats->unicast_frames_sent;
stats->rx_bytes = port_stats->good_octets_received;
stats->tx_bytes = port_stats->good_octets_sent;
stats->rx_errors = port_stats->rx_error_frame_received;
stats->tx_errors = port_stats->mac_trans_error;
stats->rx_dropped = port_stats->buffer_overrun;
stats->tx_dropped = 0;
stats->multicast = port_stats->multicast_frames_received;
stats->collisions = port_stats->excessive_collision;
stats->rx_crc_errors = port_stats->bad_crc;
}
static void prestera_port_get_hw_stats(struct prestera_port *port)
{
prestera_hw_port_stats_get(port, &port->cached_hw_stats.stats);
}
static void prestera_port_stats_update(struct work_struct *work)
{
struct prestera_port *port =
container_of(work, struct prestera_port,
cached_hw_stats.caching_dw.work);
prestera_port_get_hw_stats(port);
queue_delayed_work(prestera_wq, &port->cached_hw_stats.caching_dw,
msecs_to_jiffies(PRESTERA_STATS_DELAY_MS));
}
static const struct net_device_ops prestera_netdev_ops = {
.ndo_open = prestera_port_open,
.ndo_stop = prestera_port_close,
.ndo_start_xmit = prestera_port_xmit,
.ndo_change_mtu = prestera_port_change_mtu,
.ndo_get_stats64 = prestera_port_get_stats64,
.ndo_set_mac_address = prestera_port_set_mac_address,
.ndo_get_devlink_port = prestera_devlink_get_port,
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
};
int prestera_port_autoneg_set(struct prestera_port *port, bool enable,
u64 adver_link_modes, u8 adver_fec)
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
{
bool refresh = false;
u64 link_modes;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
int err;
u8 fec;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
if (port->caps.type != PRESTERA_PORT_TYPE_TP)
return enable ? -EINVAL : 0;
if (!enable)
goto set_autoneg;
link_modes = port->caps.supp_link_modes & adver_link_modes;
fec = port->caps.supp_fec & adver_fec;
if (!link_modes && !fec)
return -EOPNOTSUPP;
if (link_modes && port->adver_link_modes != link_modes) {
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
port->adver_link_modes = link_modes;
refresh = true;
}
if (fec && port->adver_fec != fec) {
port->adver_fec = fec;
refresh = true;
}
set_autoneg:
if (port->autoneg == enable && !refresh)
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
return 0;
err = prestera_hw_port_autoneg_set(port, enable, port->adver_link_modes,
port->adver_fec);
if (err)
return err;
port->autoneg = enable;
return 0;
}
static void prestera_port_list_add(struct prestera_port *port)
{
write_lock(&port->sw->port_list_lock);
list_add(&port->list, &port->sw->port_list);
write_unlock(&port->sw->port_list_lock);
}
static void prestera_port_list_del(struct prestera_port *port)
{
write_lock(&port->sw->port_list_lock);
list_del(&port->list);
write_unlock(&port->sw->port_list_lock);
}
static int prestera_port_create(struct prestera_switch *sw, u32 id)
{
struct prestera_port *port;
struct net_device *dev;
int err;
dev = alloc_etherdev(sizeof(*port));
if (!dev)
return -ENOMEM;
port = netdev_priv(dev);
INIT_LIST_HEAD(&port->vlans_list);
port->pvid = PRESTERA_DEFAULT_VID;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
port->dev = dev;
port->id = id;
port->sw = sw;
err = prestera_hw_port_info_get(port, &port->dev_id, &port->hw_id,
&port->fp_id);
if (err) {
dev_err(prestera_dev(sw), "Failed to get port(%u) info\n", id);
goto err_port_info_get;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
}
err = prestera_devlink_port_register(port);
if (err)
goto err_dl_port_register;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
dev->features |= NETIF_F_NETNS_LOCAL;
dev->netdev_ops = &prestera_netdev_ops;
dev->ethtool_ops = &prestera_ethtool_ops;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
netif_carrier_off(dev);
dev->mtu = min_t(unsigned int, sw->mtu_max, PRESTERA_MTU_DEFAULT);
dev->min_mtu = sw->mtu_min;
dev->max_mtu = sw->mtu_max;
err = prestera_hw_port_mtu_set(port, dev->mtu);
if (err) {
dev_err(prestera_dev(sw), "Failed to set port(%u) mtu(%d)\n",
id, dev->mtu);
goto err_port_init;
}
if (port->fp_id >= PRESTERA_MAC_ADDR_NUM_MAX) {
err = -EINVAL;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
goto err_port_init;
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
/* firmware requires that port's MAC address consist of the first
* 5 bytes of the base MAC address
*/
memcpy(dev->dev_addr, sw->base_mac, dev->addr_len - 1);
dev->dev_addr[dev->addr_len - 1] = port->fp_id;
err = prestera_hw_port_mac_set(port, dev->dev_addr);
if (err) {
dev_err(prestera_dev(sw), "Failed to set port(%u) mac addr\n", id);
goto err_port_init;
}
err = prestera_hw_port_cap_get(port, &port->caps);
if (err) {
dev_err(prestera_dev(sw), "Failed to get port(%u) caps\n", id);
goto err_port_init;
}
port->adver_fec = BIT(PRESTERA_PORT_FEC_OFF);
prestera_port_autoneg_set(port, true, port->caps.supp_link_modes,
port->caps.supp_fec);
err = prestera_hw_port_state_set(port, false);
if (err) {
dev_err(prestera_dev(sw), "Failed to set port(%u) down\n", id);
goto err_port_init;
}
err = prestera_rxtx_port_init(port);
if (err)
goto err_port_init;
INIT_DELAYED_WORK(&port->cached_hw_stats.caching_dw,
&prestera_port_stats_update);
prestera_port_list_add(port);
err = register_netdev(dev);
if (err)
goto err_register_netdev;
prestera_devlink_port_set(port);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
return 0;
err_register_netdev:
prestera_port_list_del(port);
err_port_init:
prestera_devlink_port_unregister(port);
err_dl_port_register:
err_port_info_get:
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
free_netdev(dev);
return err;
}
static void prestera_port_destroy(struct prestera_port *port)
{
struct net_device *dev = port->dev;
cancel_delayed_work_sync(&port->cached_hw_stats.caching_dw);
prestera_devlink_port_clear(port);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
unregister_netdev(dev);
prestera_port_list_del(port);
prestera_devlink_port_unregister(port);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
free_netdev(dev);
}
static void prestera_destroy_ports(struct prestera_switch *sw)
{
struct prestera_port *port, *tmp;
list_for_each_entry_safe(port, tmp, &sw->port_list, list)
prestera_port_destroy(port);
}
static int prestera_create_ports(struct prestera_switch *sw)
{
struct prestera_port *port, *tmp;
u32 port_idx;
int err;
for (port_idx = 0; port_idx < sw->port_count; port_idx++) {
err = prestera_port_create(sw, port_idx);
if (err)
goto err_port_create;
}
return 0;
err_port_create:
list_for_each_entry_safe(port, tmp, &sw->port_list, list)
prestera_port_destroy(port);
return err;
}
static void prestera_port_handle_event(struct prestera_switch *sw,
struct prestera_event *evt, void *arg)
{
struct delayed_work *caching_dw;
struct prestera_port *port;
port = prestera_find_port(sw, evt->port_evt.port_id);
if (!port || !port->dev)
return;
caching_dw = &port->cached_hw_stats.caching_dw;
if (evt->id == PRESTERA_PORT_EVENT_STATE_CHANGED) {
if (evt->port_evt.data.oper_state) {
netif_carrier_on(port->dev);
if (!delayed_work_pending(caching_dw))
queue_delayed_work(prestera_wq, caching_dw, 0);
} else {
netif_carrier_off(port->dev);
if (delayed_work_pending(caching_dw))
cancel_delayed_work(caching_dw);
}
}
}
static int prestera_event_handlers_register(struct prestera_switch *sw)
{
return prestera_hw_event_handler_register(sw, PRESTERA_EVENT_TYPE_PORT,
prestera_port_handle_event,
NULL);
}
static void prestera_event_handlers_unregister(struct prestera_switch *sw)
{
prestera_hw_event_handler_unregister(sw, PRESTERA_EVENT_TYPE_PORT,
prestera_port_handle_event);
}
static int prestera_switch_set_base_mac_addr(struct prestera_switch *sw)
{
struct device_node *base_mac_np;
struct device_node *np;
const char *base_mac;
np = of_find_compatible_node(NULL, NULL, "marvell,prestera");
base_mac_np = of_parse_phandle(np, "base-mac-provider", 0);
base_mac = of_get_mac_address(base_mac_np);
of_node_put(base_mac_np);
if (!IS_ERR(base_mac))
ether_addr_copy(sw->base_mac, base_mac);
if (!is_valid_ether_addr(sw->base_mac)) {
eth_random_addr(sw->base_mac);
dev_info(prestera_dev(sw), "using random base mac address\n");
}
return prestera_hw_switch_mac_set(sw, sw->base_mac);
}
bool prestera_netdev_check(const struct net_device *dev)
{
return dev->netdev_ops == &prestera_netdev_ops;
}
static int prestera_lower_dev_walk(struct net_device *dev,
struct netdev_nested_priv *priv)
{
struct prestera_port **pport = (struct prestera_port **)priv->data;
if (prestera_netdev_check(dev)) {
*pport = netdev_priv(dev);
return 1;
}
return 0;
}
struct prestera_port *prestera_port_dev_lower_find(struct net_device *dev)
{
struct prestera_port *port = NULL;
struct netdev_nested_priv priv = {
.data = (void *)&port,
};
if (prestera_netdev_check(dev))
return netdev_priv(dev);
netdev_walk_all_lower_dev(dev, prestera_lower_dev_walk, &priv);
return port;
}
static int prestera_netdev_port_event(struct net_device *dev,
unsigned long event, void *ptr)
{
switch (event) {
case NETDEV_PRECHANGEUPPER:
case NETDEV_CHANGEUPPER:
return prestera_bridge_port_event(dev, event, ptr);
default:
return 0;
}
}
static int prestera_netdev_event_handler(struct notifier_block *nb,
unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
int err = 0;
if (prestera_netdev_check(dev))
err = prestera_netdev_port_event(dev, event, ptr);
return notifier_from_errno(err);
}
static int prestera_netdev_event_handler_register(struct prestera_switch *sw)
{
sw->netdev_nb.notifier_call = prestera_netdev_event_handler;
return register_netdevice_notifier(&sw->netdev_nb);
}
static void prestera_netdev_event_handler_unregister(struct prestera_switch *sw)
{
unregister_netdevice_notifier(&sw->netdev_nb);
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
static int prestera_switch_init(struct prestera_switch *sw)
{
int err;
err = prestera_hw_switch_init(sw);
if (err) {
dev_err(prestera_dev(sw), "Failed to init Switch device\n");
return err;
}
rwlock_init(&sw->port_list_lock);
INIT_LIST_HEAD(&sw->port_list);
err = prestera_switch_set_base_mac_addr(sw);
if (err)
return err;
err = prestera_netdev_event_handler_register(sw);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
if (err)
return err;
err = prestera_switchdev_init(sw);
if (err)
goto err_swdev_register;
err = prestera_rxtx_switch_init(sw);
if (err)
goto err_rxtx_register;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
err = prestera_event_handlers_register(sw);
if (err)
goto err_handlers_register;
err = prestera_devlink_register(sw);
if (err)
goto err_dl_register;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
err = prestera_create_ports(sw);
if (err)
goto err_ports_create;
return 0;
err_ports_create:
prestera_devlink_unregister(sw);
err_dl_register:
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
prestera_event_handlers_unregister(sw);
err_handlers_register:
prestera_rxtx_switch_fini(sw);
err_rxtx_register:
prestera_switchdev_fini(sw);
err_swdev_register:
prestera_netdev_event_handler_unregister(sw);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
prestera_hw_switch_fini(sw);
return err;
}
static void prestera_switch_fini(struct prestera_switch *sw)
{
prestera_destroy_ports(sw);
prestera_devlink_unregister(sw);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
prestera_event_handlers_unregister(sw);
prestera_rxtx_switch_fini(sw);
prestera_switchdev_fini(sw);
prestera_netdev_event_handler_unregister(sw);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
prestera_hw_switch_fini(sw);
}
int prestera_device_register(struct prestera_device *dev)
{
struct prestera_switch *sw;
int err;
sw = prestera_devlink_alloc();
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
if (!sw)
return -ENOMEM;
dev->priv = sw;
sw->dev = dev;
err = prestera_switch_init(sw);
if (err) {
prestera_devlink_free(sw);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
return err;
}
return 0;
}
EXPORT_SYMBOL(prestera_device_register);
void prestera_device_unregister(struct prestera_device *dev)
{
struct prestera_switch *sw = dev->priv;
prestera_switch_fini(sw);
prestera_devlink_free(sw);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16 16:30:57 +00:00
}
EXPORT_SYMBOL(prestera_device_unregister);
static int __init prestera_module_init(void)
{
prestera_wq = alloc_workqueue("prestera", 0, 0);
if (!prestera_wq)
return -ENOMEM;
return 0;
}
static void __exit prestera_module_exit(void)
{
destroy_workqueue(prestera_wq);
}
module_init(prestera_module_init);
module_exit(prestera_module_exit);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("Marvell Prestera switch driver");