linux/arch/powerpc/mm/book3s64/radix_pgtable.c

1189 lines
28 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Page table handling routines for radix page table.
*
* Copyright 2015-2016, Aneesh Kumar K.V, IBM Corporation.
*/
#define pr_fmt(fmt) "radix-mmu: " fmt
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/sched/mm.h>
#include <linux/memblock.h>
#include <linux/of_fdt.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/string_helpers.h>
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
#include <linux/memory.h>
#include <asm/pgalloc.h>
powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID This change restores and formalises the behaviour that access to NULL or other user addresses by the kernel during boot should fault rather than succeed and modify memory. This was inadvertently broken when fixing another bug, because it was previously not well defined and only worked by chance. powerpc/64s/radix uses high address bits to select an address space "quadrant", which determines which PID and LPID are used to translate the rest of the address (effective PID, effective LPID). The kernel mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So the kernel page tables are installed in the PID 0 process table entry. An address at 0x0... selects quadrant 0, which uses PID=PIDR for translating the rest of the address (that is, it uses the value of the PIDR register as the effective PID). If PIDR=0, then the translation is performed with the PID 0 process table entry page tables. This is the kernel mapping, so we effectively get another copy of the kernel address space at 0. A NULL pointer access will access physical memory address 0. To prevent duplicating the kernel address space in quadrant 0, this patch allocates a guard PID containing no translations, and initializes PIDR with this during boot, before the MMU is switched on. Any kernel access to quadrant 0 will use this guard PID for translation and find no valid mappings, and therefore fault. After boot, this PID will be switchd away to user context PIDs, but those contain user mappings (and usually NULL pointer protection) rather than kernel mapping, which is much safer (and by design). It may be in future this is tightened further, which the guard PID could be used for. Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table"), introduced this problem because it zeroes PIDR at boot. However previously the value was inherited from firmware or kexec, which is not robust and can be zero (e.g., mambo). Fixes: 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table") Cc: stable@vger.kernel.org # v4.15+ Reported-by: Florian Weimer <fweimer@redhat.com> Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-07 01:20:02 +00:00
#include <asm/mmu_context.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/mmu.h>
#include <asm/firmware.h>
#include <asm/powernv.h>
#include <asm/sections.h>
#include <asm/smp.h>
#include <asm/trace.h>
#include <asm/uaccess.h>
#include <asm/ultravisor.h>
#include <trace/events/thp.h>
powerpc/mm/radix: Workaround prefetch issue with KVM There's a somewhat architectural issue with Radix MMU and KVM. When coming out of a guest with AIL (Alternate Interrupt Location, ie, MMU enabled), we start executing hypervisor code with the PID register still containing whatever the guest has been using. The problem is that the CPU can (and will) then start prefetching or speculatively load from whatever host context has that same PID (if any), thus bringing translations for that context into the TLB, which Linux doesn't know about. This can cause stale translations and subsequent crashes. Fixing this in a way that is neither racy nor a huge performance impact is difficult. We could just make the host invalidations always use broadcast forms but that would hurt single threaded programs for example. We chose to fix it instead by partitioning the PID space between guest and host. This is possible because today Linux only use 19 out of the 20 bits of PID space, so existing guests will work if we make the host use the top half of the 20 bits space. We additionally add support for a property to indicate to Linux the size of the PID register which will be useful if we eventually have processors with a larger PID space available. There is still an issue with malicious guests purposefully setting the PID register to a value in the hosts PID range. Hopefully future HW can prevent that, but in the meantime, we handle it with a pair of kludges: - On the way out of a guest, before we clear the current VCPU in the PACA, we check the PID and if it's outside of the permitted range we flush the TLB for that PID. - When context switching, if the mm is "new" on that CPU (the corresponding bit was set for the first time in the mm cpumask), we check if any sibling thread is in KVM (has a non-NULL VCPU pointer in the PACA). If that is the case, we also flush the PID for that CPU (core). This second part is needed to handle the case where a process is migrated (or starts a new pthread) on a sibling thread of the CPU coming out of KVM, as there's a window where stale translations can exist before we detect it and flush them out. A future optimization could be added by keeping track of whether the PID has ever been used and avoid doing that for completely fresh PIDs. We could similarily mark PIDs that have been the subject of a global invalidation as "fresh". But for now this will do. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rework the asm to build with CONFIG_PPC_RADIX_MMU=n, drop unneeded include of kvm_book3s_asm.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-24 04:26:06 +00:00
unsigned int mmu_pid_bits;
unsigned int mmu_base_pid;
unsigned long radix_mem_block_size __ro_after_init;
powerpc/mm/radix: Workaround prefetch issue with KVM There's a somewhat architectural issue with Radix MMU and KVM. When coming out of a guest with AIL (Alternate Interrupt Location, ie, MMU enabled), we start executing hypervisor code with the PID register still containing whatever the guest has been using. The problem is that the CPU can (and will) then start prefetching or speculatively load from whatever host context has that same PID (if any), thus bringing translations for that context into the TLB, which Linux doesn't know about. This can cause stale translations and subsequent crashes. Fixing this in a way that is neither racy nor a huge performance impact is difficult. We could just make the host invalidations always use broadcast forms but that would hurt single threaded programs for example. We chose to fix it instead by partitioning the PID space between guest and host. This is possible because today Linux only use 19 out of the 20 bits of PID space, so existing guests will work if we make the host use the top half of the 20 bits space. We additionally add support for a property to indicate to Linux the size of the PID register which will be useful if we eventually have processors with a larger PID space available. There is still an issue with malicious guests purposefully setting the PID register to a value in the hosts PID range. Hopefully future HW can prevent that, but in the meantime, we handle it with a pair of kludges: - On the way out of a guest, before we clear the current VCPU in the PACA, we check the PID and if it's outside of the permitted range we flush the TLB for that PID. - When context switching, if the mm is "new" on that CPU (the corresponding bit was set for the first time in the mm cpumask), we check if any sibling thread is in KVM (has a non-NULL VCPU pointer in the PACA). If that is the case, we also flush the PID for that CPU (core). This second part is needed to handle the case where a process is migrated (or starts a new pthread) on a sibling thread of the CPU coming out of KVM, as there's a window where stale translations can exist before we detect it and flush them out. A future optimization could be added by keeping track of whether the PID has ever been used and avoid doing that for completely fresh PIDs. We could similarily mark PIDs that have been the subject of a global invalidation as "fresh". But for now this will do. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rework the asm to build with CONFIG_PPC_RADIX_MMU=n, drop unneeded include of kvm_book3s_asm.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-24 04:26:06 +00:00
static __ref void *early_alloc_pgtable(unsigned long size, int nid,
unsigned long region_start, unsigned long region_end)
{
powerpc: prefer memblock APIs returning virtual address Patch series "memblock: simplify several early memory allocation", v4. These patches simplify some of the early memory allocations by replacing usage of older memblock APIs with newer and shinier ones. Quite a few places in the arch/ code allocated memory using a memblock API that returns a physical address of the allocated area, then converted this physical address to a virtual one and then used memset(0) to clear the allocated range. More recent memblock APIs do all the three steps in one call and their usage simplifies the code. It's important to note that regardless of API used, the core allocation is nearly identical for any set of memblock allocators: first it tries to find a free memory with all the constraints specified by the caller and then falls back to the allocation with some or all constraints disabled. The first three patches perform the conversion of call sites that have exact requirements for the node and the possible memory range. The fourth patch is a bit one-off as it simplifies openrisc's implementation of pte_alloc_one_kernel(), and not only the memblock usage. The fifth patch takes care of simpler cases when the allocation can be satisfied with a simple call to memblock_alloc(). The sixth patch removes one-liner wrappers for memblock_alloc on arm and unicore32, as suggested by Christoph. This patch (of 6): There are a several places that allocate memory using memblock APIs that return a physical address, convert the returned address to the virtual address and frequently also memset(0) the allocated range. Update these places to use memblock allocators already returning a virtual address. Use memblock functions that clear the allocated memory instead of calling memset(0) where appropriate. The calls to memblock_alloc_base() that were not followed by memset(0) are replaced with memblock_alloc_try_nid_raw(). Since the latter does not panic() when the allocation fails, the appropriate panic() calls are added to the call sites. Link: http://lkml.kernel.org/r/1546248566-14910-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Greentime Hu <green.hu@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Mark Salter <msalter@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-08 00:30:48 +00:00
phys_addr_t min_addr = MEMBLOCK_LOW_LIMIT;
phys_addr_t max_addr = MEMBLOCK_ALLOC_ANYWHERE;
treewide: add checks for the return value of memblock_alloc*() Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:30:31 +00:00
void *ptr;
powerpc: prefer memblock APIs returning virtual address Patch series "memblock: simplify several early memory allocation", v4. These patches simplify some of the early memory allocations by replacing usage of older memblock APIs with newer and shinier ones. Quite a few places in the arch/ code allocated memory using a memblock API that returns a physical address of the allocated area, then converted this physical address to a virtual one and then used memset(0) to clear the allocated range. More recent memblock APIs do all the three steps in one call and their usage simplifies the code. It's important to note that regardless of API used, the core allocation is nearly identical for any set of memblock allocators: first it tries to find a free memory with all the constraints specified by the caller and then falls back to the allocation with some or all constraints disabled. The first three patches perform the conversion of call sites that have exact requirements for the node and the possible memory range. The fourth patch is a bit one-off as it simplifies openrisc's implementation of pte_alloc_one_kernel(), and not only the memblock usage. The fifth patch takes care of simpler cases when the allocation can be satisfied with a simple call to memblock_alloc(). The sixth patch removes one-liner wrappers for memblock_alloc on arm and unicore32, as suggested by Christoph. This patch (of 6): There are a several places that allocate memory using memblock APIs that return a physical address, convert the returned address to the virtual address and frequently also memset(0) the allocated range. Update these places to use memblock allocators already returning a virtual address. Use memblock functions that clear the allocated memory instead of calling memset(0) where appropriate. The calls to memblock_alloc_base() that were not followed by memset(0) are replaced with memblock_alloc_try_nid_raw(). Since the latter does not panic() when the allocation fails, the appropriate panic() calls are added to the call sites. Link: http://lkml.kernel.org/r/1546248566-14910-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Greentime Hu <green.hu@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Mark Salter <msalter@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-08 00:30:48 +00:00
if (region_start)
min_addr = region_start;
if (region_end)
max_addr = region_end;
treewide: add checks for the return value of memblock_alloc*() Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:30:31 +00:00
ptr = memblock_alloc_try_nid(size, size, min_addr, max_addr, nid);
if (!ptr)
panic("%s: Failed to allocate %lu bytes align=0x%lx nid=%d from=%pa max_addr=%pa\n",
__func__, size, size, nid, &min_addr, &max_addr);
return ptr;
}
powerpc/mm/radix: Fix PTE/PMD fragment count for early page table mappings We can hit the following BUG_ON during memory unplug: kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:342! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries NIP [c000000000093308] pmd_fragment_free+0x48/0xc0 LR [c00000000147bfec] remove_pagetable+0x578/0x60c Call Trace: 0xc000008050000000 (unreliable) remove_pagetable+0x384/0x60c radix__remove_section_mapping+0x18/0x2c remove_section_mapping+0x1c/0x3c arch_remove_memory+0x11c/0x180 try_remove_memory+0x120/0x1b0 __remove_memory+0x20/0x40 dlpar_remove_lmb+0xc0/0x114 dlpar_memory+0x8b0/0xb20 handle_dlpar_errorlog+0xc0/0x190 pseries_hp_work_fn+0x2c/0x60 process_one_work+0x30c/0x810 worker_thread+0x98/0x540 kthread+0x1c4/0x1d0 ret_from_kernel_thread+0x5c/0x74 This occurs when unplug is attempted for such memory which has been mapped using memblock pages as part of early kernel page table setup. We wouldn't have initialized the PMD or PTE fragment count for those PMD or PTE pages. This can be fixed by allocating memory in PAGE_SIZE granularity during early page table allocation. This makes sure a specific page is not shared for another memblock allocation and we can free them correctly on removing page-table pages. Since we now do PAGE_SIZE allocations for both PUD table and PMD table (Note that PTE table allocation is already of PAGE_SIZE), we end up allocating more memory for the same amount of system RAM. Here is a comparision of how much more we need for a 64T and 2G system after this patch: 1. 64T system ------------- 64T RAM would need 64G for vmemmap with struct page size being 64B. 128 PUD tables for 64T memory (1G mappings) 1 PUD table and 64 PMD tables for 64G vmemmap (2M mappings) With default PUD[PMD]_TABLE_SIZE(4K), (128+1+64)*4K=772K With PAGE_SIZE(64K) table allocations, (128+1+64)*64K=12352K 2. 2G system ------------ 2G RAM would need 2M for vmemmap with struct page size being 64B. 1 PUD table for 2G memory (1G mapping) 1 PUD table and 1 PMD table for 2M vmemmap (2M mappings) With default PUD[PMD]_TABLE_SIZE(4K), (1+1+1)*4K=12K With new PAGE_SIZE(64K) table allocations, (1+1+1)*64K=192K Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-2-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:22 +00:00
/*
* When allocating pud or pmd pointers, we allocate a complete page
* of PAGE_SIZE rather than PUD_TABLE_SIZE or PMD_TABLE_SIZE. This
* is to ensure that the page obtained from the memblock allocator
* can be completely used as page table page and can be freed
* correctly when the page table entries are removed.
*/
static int early_map_kernel_page(unsigned long ea, unsigned long pa,
pgprot_t flags,
unsigned int map_page_size,
int nid,
unsigned long region_start, unsigned long region_end)
{
unsigned long pfn = pa >> PAGE_SHIFT;
pgd_t *pgdp;
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
p4d_t *p4dp;
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
pgdp = pgd_offset_k(ea);
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
p4dp = p4d_offset(pgdp, ea);
if (p4d_none(*p4dp)) {
powerpc/mm/radix: Fix PTE/PMD fragment count for early page table mappings We can hit the following BUG_ON during memory unplug: kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:342! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries NIP [c000000000093308] pmd_fragment_free+0x48/0xc0 LR [c00000000147bfec] remove_pagetable+0x578/0x60c Call Trace: 0xc000008050000000 (unreliable) remove_pagetable+0x384/0x60c radix__remove_section_mapping+0x18/0x2c remove_section_mapping+0x1c/0x3c arch_remove_memory+0x11c/0x180 try_remove_memory+0x120/0x1b0 __remove_memory+0x20/0x40 dlpar_remove_lmb+0xc0/0x114 dlpar_memory+0x8b0/0xb20 handle_dlpar_errorlog+0xc0/0x190 pseries_hp_work_fn+0x2c/0x60 process_one_work+0x30c/0x810 worker_thread+0x98/0x540 kthread+0x1c4/0x1d0 ret_from_kernel_thread+0x5c/0x74 This occurs when unplug is attempted for such memory which has been mapped using memblock pages as part of early kernel page table setup. We wouldn't have initialized the PMD or PTE fragment count for those PMD or PTE pages. This can be fixed by allocating memory in PAGE_SIZE granularity during early page table allocation. This makes sure a specific page is not shared for another memblock allocation and we can free them correctly on removing page-table pages. Since we now do PAGE_SIZE allocations for both PUD table and PMD table (Note that PTE table allocation is already of PAGE_SIZE), we end up allocating more memory for the same amount of system RAM. Here is a comparision of how much more we need for a 64T and 2G system after this patch: 1. 64T system ------------- 64T RAM would need 64G for vmemmap with struct page size being 64B. 128 PUD tables for 64T memory (1G mappings) 1 PUD table and 64 PMD tables for 64G vmemmap (2M mappings) With default PUD[PMD]_TABLE_SIZE(4K), (128+1+64)*4K=772K With PAGE_SIZE(64K) table allocations, (128+1+64)*64K=12352K 2. 2G system ------------ 2G RAM would need 2M for vmemmap with struct page size being 64B. 1 PUD table for 2G memory (1G mapping) 1 PUD table and 1 PMD table for 2M vmemmap (2M mappings) With default PUD[PMD]_TABLE_SIZE(4K), (1+1+1)*4K=12K With new PAGE_SIZE(64K) table allocations, (1+1+1)*64K=192K Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-2-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:22 +00:00
pudp = early_alloc_pgtable(PAGE_SIZE, nid,
region_start, region_end);
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
p4d_populate(&init_mm, p4dp, pudp);
}
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
pudp = pud_offset(p4dp, ea);
if (map_page_size == PUD_SIZE) {
ptep = (pte_t *)pudp;
goto set_the_pte;
}
if (pud_none(*pudp)) {
powerpc/mm/radix: Fix PTE/PMD fragment count for early page table mappings We can hit the following BUG_ON during memory unplug: kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:342! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries NIP [c000000000093308] pmd_fragment_free+0x48/0xc0 LR [c00000000147bfec] remove_pagetable+0x578/0x60c Call Trace: 0xc000008050000000 (unreliable) remove_pagetable+0x384/0x60c radix__remove_section_mapping+0x18/0x2c remove_section_mapping+0x1c/0x3c arch_remove_memory+0x11c/0x180 try_remove_memory+0x120/0x1b0 __remove_memory+0x20/0x40 dlpar_remove_lmb+0xc0/0x114 dlpar_memory+0x8b0/0xb20 handle_dlpar_errorlog+0xc0/0x190 pseries_hp_work_fn+0x2c/0x60 process_one_work+0x30c/0x810 worker_thread+0x98/0x540 kthread+0x1c4/0x1d0 ret_from_kernel_thread+0x5c/0x74 This occurs when unplug is attempted for such memory which has been mapped using memblock pages as part of early kernel page table setup. We wouldn't have initialized the PMD or PTE fragment count for those PMD or PTE pages. This can be fixed by allocating memory in PAGE_SIZE granularity during early page table allocation. This makes sure a specific page is not shared for another memblock allocation and we can free them correctly on removing page-table pages. Since we now do PAGE_SIZE allocations for both PUD table and PMD table (Note that PTE table allocation is already of PAGE_SIZE), we end up allocating more memory for the same amount of system RAM. Here is a comparision of how much more we need for a 64T and 2G system after this patch: 1. 64T system ------------- 64T RAM would need 64G for vmemmap with struct page size being 64B. 128 PUD tables for 64T memory (1G mappings) 1 PUD table and 64 PMD tables for 64G vmemmap (2M mappings) With default PUD[PMD]_TABLE_SIZE(4K), (128+1+64)*4K=772K With PAGE_SIZE(64K) table allocations, (128+1+64)*64K=12352K 2. 2G system ------------ 2G RAM would need 2M for vmemmap with struct page size being 64B. 1 PUD table for 2G memory (1G mapping) 1 PUD table and 1 PMD table for 2M vmemmap (2M mappings) With default PUD[PMD]_TABLE_SIZE(4K), (1+1+1)*4K=12K With new PAGE_SIZE(64K) table allocations, (1+1+1)*64K=192K Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-2-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:22 +00:00
pmdp = early_alloc_pgtable(PAGE_SIZE, nid, region_start,
region_end);
pud_populate(&init_mm, pudp, pmdp);
}
pmdp = pmd_offset(pudp, ea);
if (map_page_size == PMD_SIZE) {
ptep = pmdp_ptep(pmdp);
goto set_the_pte;
}
if (!pmd_present(*pmdp)) {
ptep = early_alloc_pgtable(PAGE_SIZE, nid,
region_start, region_end);
pmd_populate_kernel(&init_mm, pmdp, ptep);
}
ptep = pte_offset_kernel(pmdp, ea);
set_the_pte:
set_pte_at(&init_mm, ea, ptep, pfn_pte(pfn, flags));
smp_wmb();
return 0;
}
/*
* nid, region_start, and region_end are hints to try to place the page
* table memory in the same node or region.
*/
static int __map_kernel_page(unsigned long ea, unsigned long pa,
pgprot_t flags,
unsigned int map_page_size,
int nid,
unsigned long region_start, unsigned long region_end)
{
unsigned long pfn = pa >> PAGE_SHIFT;
pgd_t *pgdp;
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
p4d_t *p4dp;
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
/*
* Make sure task size is correct as per the max adddr
*/
BUILD_BUG_ON(TASK_SIZE_USER64 > RADIX_PGTABLE_RANGE);
#ifdef CONFIG_PPC_64K_PAGES
BUILD_BUG_ON(RADIX_KERN_MAP_SIZE != (1UL << MAX_EA_BITS_PER_CONTEXT));
#endif
if (unlikely(!slab_is_available()))
return early_map_kernel_page(ea, pa, flags, map_page_size,
nid, region_start, region_end);
/*
* Should make page table allocation functions be able to take a
* node, so we can place kernel page tables on the right nodes after
* boot.
*/
pgdp = pgd_offset_k(ea);
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
p4dp = p4d_offset(pgdp, ea);
pudp = pud_alloc(&init_mm, p4dp, ea);
if (!pudp)
return -ENOMEM;
if (map_page_size == PUD_SIZE) {
ptep = (pte_t *)pudp;
goto set_the_pte;
}
pmdp = pmd_alloc(&init_mm, pudp, ea);
if (!pmdp)
return -ENOMEM;
if (map_page_size == PMD_SIZE) {
ptep = pmdp_ptep(pmdp);
goto set_the_pte;
}
ptep = pte_alloc_kernel(pmdp, ea);
if (!ptep)
return -ENOMEM;
set_the_pte:
set_pte_at(&init_mm, ea, ptep, pfn_pte(pfn, flags));
smp_wmb();
return 0;
}
int radix__map_kernel_page(unsigned long ea, unsigned long pa,
pgprot_t flags,
unsigned int map_page_size)
{
return __map_kernel_page(ea, pa, flags, map_page_size, -1, 0, 0);
}
#ifdef CONFIG_STRICT_KERNEL_RWX
void radix__change_memory_range(unsigned long start, unsigned long end,
unsigned long clear)
{
unsigned long idx;
pgd_t *pgdp;
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
p4d_t *p4dp;
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
start = ALIGN_DOWN(start, PAGE_SIZE);
end = PAGE_ALIGN(end); // aligns up
pr_debug("Changing flags on range %lx-%lx removing 0x%lx\n",
start, end, clear);
for (idx = start; idx < end; idx += PAGE_SIZE) {
pgdp = pgd_offset_k(idx);
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
p4dp = p4d_offset(pgdp, idx);
pudp = pud_alloc(&init_mm, p4dp, idx);
if (!pudp)
continue;
if (pud_is_leaf(*pudp)) {
ptep = (pte_t *)pudp;
goto update_the_pte;
}
pmdp = pmd_alloc(&init_mm, pudp, idx);
if (!pmdp)
continue;
if (pmd_is_leaf(*pmdp)) {
ptep = pmdp_ptep(pmdp);
goto update_the_pte;
}
ptep = pte_alloc_kernel(pmdp, idx);
if (!ptep)
continue;
update_the_pte:
radix__pte_update(&init_mm, idx, ptep, clear, 0, 0);
}
radix__flush_tlb_kernel_range(start, end);
}
void radix__mark_rodata_ro(void)
{
unsigned long start, end;
start = (unsigned long)_stext;
end = (unsigned long)__init_begin;
radix__change_memory_range(start, end, _PAGE_WRITE);
}
void radix__mark_initmem_nx(void)
{
unsigned long start = (unsigned long)__init_begin;
unsigned long end = (unsigned long)__init_end;
radix__change_memory_range(start, end, _PAGE_EXEC);
}
#endif /* CONFIG_STRICT_KERNEL_RWX */
static inline void __meminit
print_mapping(unsigned long start, unsigned long end, unsigned long size, bool exec)
{
char buf[10];
if (end <= start)
return;
string_get_size(size, 1, STRING_UNITS_2, buf, sizeof(buf));
pr_info("Mapped 0x%016lx-0x%016lx with %s pages%s\n", start, end, buf,
exec ? " (exec)" : "");
}
static unsigned long next_boundary(unsigned long addr, unsigned long end)
{
#ifdef CONFIG_STRICT_KERNEL_RWX
if (addr < __pa_symbol(__init_begin))
return __pa_symbol(__init_begin);
#endif
return end;
}
static int __meminit create_physical_mapping(unsigned long start,
unsigned long end,
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
unsigned long max_mapping_size,
int nid, pgprot_t _prot)
{
unsigned long vaddr, addr, mapping_size = 0;
bool prev_exec, exec = false;
pgprot_t prot;
int psize;
start = ALIGN(start, PAGE_SIZE);
end = ALIGN_DOWN(end, PAGE_SIZE);
for (addr = start; addr < end; addr += mapping_size) {
unsigned long gap, previous_size;
int rc;
gap = next_boundary(addr, end) - addr;
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
if (gap > max_mapping_size)
gap = max_mapping_size;
previous_size = mapping_size;
prev_exec = exec;
if (IS_ALIGNED(addr, PUD_SIZE) && gap >= PUD_SIZE &&
mmu_psize_defs[MMU_PAGE_1G].shift) {
mapping_size = PUD_SIZE;
psize = MMU_PAGE_1G;
} else if (IS_ALIGNED(addr, PMD_SIZE) && gap >= PMD_SIZE &&
mmu_psize_defs[MMU_PAGE_2M].shift) {
mapping_size = PMD_SIZE;
psize = MMU_PAGE_2M;
} else {
mapping_size = PAGE_SIZE;
psize = mmu_virtual_psize;
}
vaddr = (unsigned long)__va(addr);
if (overlaps_kernel_text(vaddr, vaddr + mapping_size) ||
overlaps_interrupt_vector_text(vaddr, vaddr + mapping_size)) {
prot = PAGE_KERNEL_X;
exec = true;
} else {
prot = _prot;
exec = false;
}
if (mapping_size != previous_size || exec != prev_exec) {
print_mapping(start, addr, previous_size, prev_exec);
start = addr;
}
rc = __map_kernel_page(vaddr, addr, prot, mapping_size, nid, start, end);
if (rc)
return rc;
update_page_count(psize, 1);
}
print_mapping(start, addr, mapping_size, exec);
return 0;
}
static void __init radix_init_pgtable(void)
{
unsigned long rts_field;
arch, drivers: replace for_each_membock() with for_each_mem_range() There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:58:08 +00:00
phys_addr_t start, end;
u64 i;
/* We don't support slb for radix */
mmu_slb_size = 0;
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
/*
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
* Create the linear mapping
*/
arch, drivers: replace for_each_membock() with for_each_mem_range() There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:58:08 +00:00
for_each_mem_range(i, &start, &end) {
/*
* The memblock allocator is up at this point, so the
* page tables will be allocated within the range. No
* need or a node (which we don't have yet).
*/
arch, drivers: replace for_each_membock() with for_each_mem_range() There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:58:08 +00:00
if (end >= RADIX_VMALLOC_START) {
pr_warn("Outside the supported range\n");
continue;
}
arch, drivers: replace for_each_membock() with for_each_mem_range() There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:58:08 +00:00
WARN_ON(create_physical_mapping(start, end,
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
radix_mem_block_size,
-1, PAGE_KERNEL));
}
powerpc/mm/radix: Workaround prefetch issue with KVM There's a somewhat architectural issue with Radix MMU and KVM. When coming out of a guest with AIL (Alternate Interrupt Location, ie, MMU enabled), we start executing hypervisor code with the PID register still containing whatever the guest has been using. The problem is that the CPU can (and will) then start prefetching or speculatively load from whatever host context has that same PID (if any), thus bringing translations for that context into the TLB, which Linux doesn't know about. This can cause stale translations and subsequent crashes. Fixing this in a way that is neither racy nor a huge performance impact is difficult. We could just make the host invalidations always use broadcast forms but that would hurt single threaded programs for example. We chose to fix it instead by partitioning the PID space between guest and host. This is possible because today Linux only use 19 out of the 20 bits of PID space, so existing guests will work if we make the host use the top half of the 20 bits space. We additionally add support for a property to indicate to Linux the size of the PID register which will be useful if we eventually have processors with a larger PID space available. There is still an issue with malicious guests purposefully setting the PID register to a value in the hosts PID range. Hopefully future HW can prevent that, but in the meantime, we handle it with a pair of kludges: - On the way out of a guest, before we clear the current VCPU in the PACA, we check the PID and if it's outside of the permitted range we flush the TLB for that PID. - When context switching, if the mm is "new" on that CPU (the corresponding bit was set for the first time in the mm cpumask), we check if any sibling thread is in KVM (has a non-NULL VCPU pointer in the PACA). If that is the case, we also flush the PID for that CPU (core). This second part is needed to handle the case where a process is migrated (or starts a new pthread) on a sibling thread of the CPU coming out of KVM, as there's a window where stale translations can exist before we detect it and flush them out. A future optimization could be added by keeping track of whether the PID has ever been used and avoid doing that for completely fresh PIDs. We could similarily mark PIDs that have been the subject of a global invalidation as "fresh". But for now this will do. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rework the asm to build with CONFIG_PPC_RADIX_MMU=n, drop unneeded include of kvm_book3s_asm.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-24 04:26:06 +00:00
/* Find out how many PID bits are supported */
if (!cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG)) {
if (!mmu_pid_bits)
mmu_pid_bits = 20;
mmu_base_pid = 1;
} else if (cpu_has_feature(CPU_FTR_HVMODE)) {
powerpc/mm/radix: Workaround prefetch issue with KVM There's a somewhat architectural issue with Radix MMU and KVM. When coming out of a guest with AIL (Alternate Interrupt Location, ie, MMU enabled), we start executing hypervisor code with the PID register still containing whatever the guest has been using. The problem is that the CPU can (and will) then start prefetching or speculatively load from whatever host context has that same PID (if any), thus bringing translations for that context into the TLB, which Linux doesn't know about. This can cause stale translations and subsequent crashes. Fixing this in a way that is neither racy nor a huge performance impact is difficult. We could just make the host invalidations always use broadcast forms but that would hurt single threaded programs for example. We chose to fix it instead by partitioning the PID space between guest and host. This is possible because today Linux only use 19 out of the 20 bits of PID space, so existing guests will work if we make the host use the top half of the 20 bits space. We additionally add support for a property to indicate to Linux the size of the PID register which will be useful if we eventually have processors with a larger PID space available. There is still an issue with malicious guests purposefully setting the PID register to a value in the hosts PID range. Hopefully future HW can prevent that, but in the meantime, we handle it with a pair of kludges: - On the way out of a guest, before we clear the current VCPU in the PACA, we check the PID and if it's outside of the permitted range we flush the TLB for that PID. - When context switching, if the mm is "new" on that CPU (the corresponding bit was set for the first time in the mm cpumask), we check if any sibling thread is in KVM (has a non-NULL VCPU pointer in the PACA). If that is the case, we also flush the PID for that CPU (core). This second part is needed to handle the case where a process is migrated (or starts a new pthread) on a sibling thread of the CPU coming out of KVM, as there's a window where stale translations can exist before we detect it and flush them out. A future optimization could be added by keeping track of whether the PID has ever been used and avoid doing that for completely fresh PIDs. We could similarily mark PIDs that have been the subject of a global invalidation as "fresh". But for now this will do. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rework the asm to build with CONFIG_PPC_RADIX_MMU=n, drop unneeded include of kvm_book3s_asm.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-24 04:26:06 +00:00
if (!mmu_pid_bits)
mmu_pid_bits = 20;
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
/*
* When KVM is possible, we only use the top half of the
* PID space to avoid collisions between host and guest PIDs
* which can cause problems due to prefetch when exiting the
* guest with AIL=3
*/
mmu_base_pid = 1 << (mmu_pid_bits - 1);
#else
mmu_base_pid = 1;
#endif
} else {
/* The guest uses the bottom half of the PID space */
if (!mmu_pid_bits)
mmu_pid_bits = 19;
mmu_base_pid = 1;
}
/*
* Allocate Partition table and process table for the
* host.
*/
powerpc/mm/radix: Workaround prefetch issue with KVM There's a somewhat architectural issue with Radix MMU and KVM. When coming out of a guest with AIL (Alternate Interrupt Location, ie, MMU enabled), we start executing hypervisor code with the PID register still containing whatever the guest has been using. The problem is that the CPU can (and will) then start prefetching or speculatively load from whatever host context has that same PID (if any), thus bringing translations for that context into the TLB, which Linux doesn't know about. This can cause stale translations and subsequent crashes. Fixing this in a way that is neither racy nor a huge performance impact is difficult. We could just make the host invalidations always use broadcast forms but that would hurt single threaded programs for example. We chose to fix it instead by partitioning the PID space between guest and host. This is possible because today Linux only use 19 out of the 20 bits of PID space, so existing guests will work if we make the host use the top half of the 20 bits space. We additionally add support for a property to indicate to Linux the size of the PID register which will be useful if we eventually have processors with a larger PID space available. There is still an issue with malicious guests purposefully setting the PID register to a value in the hosts PID range. Hopefully future HW can prevent that, but in the meantime, we handle it with a pair of kludges: - On the way out of a guest, before we clear the current VCPU in the PACA, we check the PID and if it's outside of the permitted range we flush the TLB for that PID. - When context switching, if the mm is "new" on that CPU (the corresponding bit was set for the first time in the mm cpumask), we check if any sibling thread is in KVM (has a non-NULL VCPU pointer in the PACA). If that is the case, we also flush the PID for that CPU (core). This second part is needed to handle the case where a process is migrated (or starts a new pthread) on a sibling thread of the CPU coming out of KVM, as there's a window where stale translations can exist before we detect it and flush them out. A future optimization could be added by keeping track of whether the PID has ever been used and avoid doing that for completely fresh PIDs. We could similarily mark PIDs that have been the subject of a global invalidation as "fresh". But for now this will do. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rework the asm to build with CONFIG_PPC_RADIX_MMU=n, drop unneeded include of kvm_book3s_asm.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-24 04:26:06 +00:00
BUG_ON(PRTB_SIZE_SHIFT > 36);
process_tb = early_alloc_pgtable(1UL << PRTB_SIZE_SHIFT, -1, 0, 0);
/*
* Fill in the process table.
*/
rts_field = radix__get_tree_size();
process_tb->prtb0 = cpu_to_be64(rts_field | __pa(init_mm.pgd) | RADIX_PGD_INDEX_SIZE);
powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID This change restores and formalises the behaviour that access to NULL or other user addresses by the kernel during boot should fault rather than succeed and modify memory. This was inadvertently broken when fixing another bug, because it was previously not well defined and only worked by chance. powerpc/64s/radix uses high address bits to select an address space "quadrant", which determines which PID and LPID are used to translate the rest of the address (effective PID, effective LPID). The kernel mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So the kernel page tables are installed in the PID 0 process table entry. An address at 0x0... selects quadrant 0, which uses PID=PIDR for translating the rest of the address (that is, it uses the value of the PIDR register as the effective PID). If PIDR=0, then the translation is performed with the PID 0 process table entry page tables. This is the kernel mapping, so we effectively get another copy of the kernel address space at 0. A NULL pointer access will access physical memory address 0. To prevent duplicating the kernel address space in quadrant 0, this patch allocates a guard PID containing no translations, and initializes PIDR with this during boot, before the MMU is switched on. Any kernel access to quadrant 0 will use this guard PID for translation and find no valid mappings, and therefore fault. After boot, this PID will be switchd away to user context PIDs, but those contain user mappings (and usually NULL pointer protection) rather than kernel mapping, which is much safer (and by design). It may be in future this is tightened further, which the guard PID could be used for. Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table"), introduced this problem because it zeroes PIDR at boot. However previously the value was inherited from firmware or kexec, which is not robust and can be zero (e.g., mambo). Fixes: 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table") Cc: stable@vger.kernel.org # v4.15+ Reported-by: Florian Weimer <fweimer@redhat.com> Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-07 01:20:02 +00:00
/*
* The init_mm context is given the first available (non-zero) PID,
* which is the "guard PID" and contains no page table. PIDR should
* never be set to zero because that duplicates the kernel address
* space at the 0x0... offset (quadrant 0)!
*
* An arbitrary PID that may later be allocated by the PID allocator
* for userspace processes must not be used either, because that
* would cause stale user mappings for that PID on CPUs outside of
* the TLB invalidation scheme (because it won't be in mm_cpumask).
*
* So permanently carve out one PID for the purpose of a guard PID.
*/
init_mm.context.id = mmu_base_pid;
mmu_base_pid++;
}
static void __init radix_init_partition_table(void)
{
unsigned long rts_field, dw0, dw1;
mmu_partition_table_init();
rts_field = radix__get_tree_size();
dw0 = rts_field | __pa(init_mm.pgd) | RADIX_PGD_INDEX_SIZE | PATB_HR;
dw1 = __pa(process_tb) | (PRTB_SIZE_SHIFT - 12) | PATB_GR;
mmu_partition_table_set_entry(0, dw0, dw1, false);
pr_info("Initializing Radix MMU\n");
}
static int __init get_idx_from_shift(unsigned int shift)
{
int idx = -1;
switch (shift) {
case 0xc:
idx = MMU_PAGE_4K;
break;
case 0x10:
idx = MMU_PAGE_64K;
break;
case 0x15:
idx = MMU_PAGE_2M;
break;
case 0x1e:
idx = MMU_PAGE_1G;
break;
}
return idx;
}
static int __init radix_dt_scan_page_sizes(unsigned long node,
const char *uname, int depth,
void *data)
{
int size = 0;
int shift, idx;
unsigned int ap;
const __be32 *prop;
const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
/* We are scanning "cpu" nodes only */
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
powerpc/mm/radix: Workaround prefetch issue with KVM There's a somewhat architectural issue with Radix MMU and KVM. When coming out of a guest with AIL (Alternate Interrupt Location, ie, MMU enabled), we start executing hypervisor code with the PID register still containing whatever the guest has been using. The problem is that the CPU can (and will) then start prefetching or speculatively load from whatever host context has that same PID (if any), thus bringing translations for that context into the TLB, which Linux doesn't know about. This can cause stale translations and subsequent crashes. Fixing this in a way that is neither racy nor a huge performance impact is difficult. We could just make the host invalidations always use broadcast forms but that would hurt single threaded programs for example. We chose to fix it instead by partitioning the PID space between guest and host. This is possible because today Linux only use 19 out of the 20 bits of PID space, so existing guests will work if we make the host use the top half of the 20 bits space. We additionally add support for a property to indicate to Linux the size of the PID register which will be useful if we eventually have processors with a larger PID space available. There is still an issue with malicious guests purposefully setting the PID register to a value in the hosts PID range. Hopefully future HW can prevent that, but in the meantime, we handle it with a pair of kludges: - On the way out of a guest, before we clear the current VCPU in the PACA, we check the PID and if it's outside of the permitted range we flush the TLB for that PID. - When context switching, if the mm is "new" on that CPU (the corresponding bit was set for the first time in the mm cpumask), we check if any sibling thread is in KVM (has a non-NULL VCPU pointer in the PACA). If that is the case, we also flush the PID for that CPU (core). This second part is needed to handle the case where a process is migrated (or starts a new pthread) on a sibling thread of the CPU coming out of KVM, as there's a window where stale translations can exist before we detect it and flush them out. A future optimization could be added by keeping track of whether the PID has ever been used and avoid doing that for completely fresh PIDs. We could similarily mark PIDs that have been the subject of a global invalidation as "fresh". But for now this will do. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rework the asm to build with CONFIG_PPC_RADIX_MMU=n, drop unneeded include of kvm_book3s_asm.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-24 04:26:06 +00:00
/* Find MMU PID size */
prop = of_get_flat_dt_prop(node, "ibm,mmu-pid-bits", &size);
if (prop && size == 4)
mmu_pid_bits = be32_to_cpup(prop);
/* Grab page size encodings */
prop = of_get_flat_dt_prop(node, "ibm,processor-radix-AP-encodings", &size);
if (!prop)
return 0;
pr_info("Page sizes from device-tree:\n");
for (; size >= 4; size -= 4, ++prop) {
struct mmu_psize_def *def;
/* top 3 bit is AP encoding */
shift = be32_to_cpu(prop[0]) & ~(0xe << 28);
ap = be32_to_cpu(prop[0]) >> 29;
pr_info("Page size shift = %d AP=0x%x\n", shift, ap);
idx = get_idx_from_shift(shift);
if (idx < 0)
continue;
def = &mmu_psize_defs[idx];
def->shift = shift;
def->ap = ap;
}
/* needed ? */
cur_cpu_spec->mmu_features &= ~MMU_FTR_NO_SLBIE_B;
return 1;
}
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
#ifdef CONFIG_MEMORY_HOTPLUG
static int __init probe_memory_block_size(unsigned long node, const char *uname, int
depth, void *data)
{
unsigned long *mem_block_size = (unsigned long *)data;
const __be32 *prop;
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
int len;
if (depth != 1)
return 0;
if (strcmp(uname, "ibm,dynamic-reconfiguration-memory"))
return 0;
prop = of_get_flat_dt_prop(node, "ibm,lmb-size", &len);
if (!prop || len < dt_root_size_cells * sizeof(__be32))
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
/*
* Nothing in the device tree
*/
*mem_block_size = MIN_MEMORY_BLOCK_SIZE;
else
*mem_block_size = of_read_number(prop, dt_root_size_cells);
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
return 1;
}
static unsigned long radix_memory_block_size(void)
{
unsigned long mem_block_size = MIN_MEMORY_BLOCK_SIZE;
/*
* OPAL firmware feature is set by now. Hence we are ok
* to test OPAL feature.
*/
if (firmware_has_feature(FW_FEATURE_OPAL))
mem_block_size = 1UL * 1024 * 1024 * 1024;
else
of_scan_flat_dt(probe_memory_block_size, &mem_block_size);
return mem_block_size;
}
#else /* CONFIG_MEMORY_HOTPLUG */
static unsigned long radix_memory_block_size(void)
{
return 1UL * 1024 * 1024 * 1024;
}
#endif /* CONFIG_MEMORY_HOTPLUG */
void __init radix__early_init_devtree(void)
{
int rc;
/*
* Try to find the available page sizes in the device-tree
*/
rc = of_scan_flat_dt(radix_dt_scan_page_sizes, NULL);
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
if (!rc) {
/*
* No page size details found in device tree.
* Let's assume we have page 4k and 64k support
*/
mmu_psize_defs[MMU_PAGE_4K].shift = 12;
mmu_psize_defs[MMU_PAGE_4K].ap = 0x0;
mmu_psize_defs[MMU_PAGE_64K].shift = 16;
mmu_psize_defs[MMU_PAGE_64K].ap = 0x5;
}
/*
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
* Max mapping size used when mapping pages. We don't use
* ppc_md.memory_block_size() here because this get called
* early and we don't have machine probe called yet. Also
* the pseries implementation only check for ibm,lmb-size.
* All hypervisor supporting radix do expose that device
* tree node.
*/
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
radix_mem_block_size = radix_memory_block_size();
return;
}
static void radix_init_amor(void)
{
/*
* In HV mode, we init AMOR (Authority Mask Override Register) so that
* the hypervisor and guest can setup IAMR (Instruction Authority Mask
* Register), enable key 0 and set it to 1.
*
* AMOR = 0b1100 .... 0000 (Mask for key 0 is 11)
*/
mtspr(SPRN_AMOR, (3ul << 62));
}
void __init radix__early_init_mmu(void)
{
unsigned long lpcr;
#ifdef CONFIG_PPC_64K_PAGES
/* PAGE_SIZE mappings */
mmu_virtual_psize = MMU_PAGE_64K;
#else
mmu_virtual_psize = MMU_PAGE_4K;
#endif
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/* vmemmap mapping */
if (mmu_psize_defs[MMU_PAGE_2M].shift) {
/*
* map vmemmap using 2M if available
*/
mmu_vmemmap_psize = MMU_PAGE_2M;
} else
mmu_vmemmap_psize = mmu_virtual_psize;
#endif
/*
* initialize page table size
*/
__pte_index_size = RADIX_PTE_INDEX_SIZE;
__pmd_index_size = RADIX_PMD_INDEX_SIZE;
__pud_index_size = RADIX_PUD_INDEX_SIZE;
__pgd_index_size = RADIX_PGD_INDEX_SIZE;
__pud_cache_index = RADIX_PUD_INDEX_SIZE;
__pte_table_size = RADIX_PTE_TABLE_SIZE;
__pmd_table_size = RADIX_PMD_TABLE_SIZE;
__pud_table_size = RADIX_PUD_TABLE_SIZE;
__pgd_table_size = RADIX_PGD_TABLE_SIZE;
__pmd_val_bits = RADIX_PMD_VAL_BITS;
__pud_val_bits = RADIX_PUD_VAL_BITS;
__pgd_val_bits = RADIX_PGD_VAL_BITS;
__kernel_virt_start = RADIX_KERN_VIRT_START;
__vmalloc_start = RADIX_VMALLOC_START;
__vmalloc_end = RADIX_VMALLOC_END;
__kernel_io_start = RADIX_KERN_IO_START;
__kernel_io_end = RADIX_KERN_IO_END;
vmemmap = (struct page *)RADIX_VMEMMAP_START;
ioremap_bot = IOREMAP_BASE;
#ifdef CONFIG_PCI
pci_io_base = ISA_IO_BASE;
#endif
__pte_frag_nr = RADIX_PTE_FRAG_NR;
__pte_frag_size_shift = RADIX_PTE_FRAG_SIZE_SHIFT;
__pmd_frag_nr = RADIX_PMD_FRAG_NR;
__pmd_frag_size_shift = RADIX_PMD_FRAG_SIZE_SHIFT;
radix_init_pgtable();
if (!firmware_has_feature(FW_FEATURE_LPAR)) {
lpcr = mfspr(SPRN_LPCR);
mtspr(SPRN_LPCR, lpcr | LPCR_UPRT | LPCR_HR);
radix_init_partition_table();
radix_init_amor();
} else {
radix_init_pseries();
}
memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE);
powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID This change restores and formalises the behaviour that access to NULL or other user addresses by the kernel during boot should fault rather than succeed and modify memory. This was inadvertently broken when fixing another bug, because it was previously not well defined and only worked by chance. powerpc/64s/radix uses high address bits to select an address space "quadrant", which determines which PID and LPID are used to translate the rest of the address (effective PID, effective LPID). The kernel mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So the kernel page tables are installed in the PID 0 process table entry. An address at 0x0... selects quadrant 0, which uses PID=PIDR for translating the rest of the address (that is, it uses the value of the PIDR register as the effective PID). If PIDR=0, then the translation is performed with the PID 0 process table entry page tables. This is the kernel mapping, so we effectively get another copy of the kernel address space at 0. A NULL pointer access will access physical memory address 0. To prevent duplicating the kernel address space in quadrant 0, this patch allocates a guard PID containing no translations, and initializes PIDR with this during boot, before the MMU is switched on. Any kernel access to quadrant 0 will use this guard PID for translation and find no valid mappings, and therefore fault. After boot, this PID will be switchd away to user context PIDs, but those contain user mappings (and usually NULL pointer protection) rather than kernel mapping, which is much safer (and by design). It may be in future this is tightened further, which the guard PID could be used for. Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table"), introduced this problem because it zeroes PIDR at boot. However previously the value was inherited from firmware or kexec, which is not robust and can be zero (e.g., mambo). Fixes: 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table") Cc: stable@vger.kernel.org # v4.15+ Reported-by: Florian Weimer <fweimer@redhat.com> Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-07 01:20:02 +00:00
/* Switch to the guard PID before turning on MMU */
radix__switch_mmu_context(NULL, &init_mm);
tlbiel_all();
}
void radix__early_init_mmu_secondary(void)
{
unsigned long lpcr;
/*
* update partition table control register and UPRT
*/
if (!firmware_has_feature(FW_FEATURE_LPAR)) {
lpcr = mfspr(SPRN_LPCR);
mtspr(SPRN_LPCR, lpcr | LPCR_UPRT | LPCR_HR);
set_ptcr_when_no_uv(__pa(partition_tb) |
(PATB_SIZE_SHIFT - 12));
radix_init_amor();
}
powerpc/64s: Improve local TLB flush for boot and MCE on POWER9 There are several cases outside the normal address space management where a CPU's entire local TLB is to be flushed: 1. Booting the kernel, in case something has left stale entries in the TLB (e.g., kexec). 2. Machine check, to clean corrupted TLB entries. One other place where the TLB is flushed, is waking from deep idle states. The flush is a side-effect of calling ->cpu_restore with the intention of re-setting various SPRs. The flush itself is unnecessary because in the first case, the TLB should not acquire new corrupted TLB entries as part of sleep/wake (though they may be lost). This type of TLB flush is coded inflexibly, several times for each CPU type, and they have a number of problems with ISA v3.0B: - The current radix mode of the MMU is not taken into account, it is always done as a hash flushn For IS=2 (LPID-matching flush from host) and IS=3 with HV=0 (guest kernel flush), tlbie(l) is undefined if the R field does not match the current radix mode. - ISA v3.0B hash must flush the partition and process table caches as well. - ISA v3.0B radix must flush partition and process scoped translations, partition and process table caches, and also the page walk cache. So consolidate the flushing code and implement it in C and inline asm under the mm/ directory with the rest of the flush code. Add ISA v3.0B cases for radix and hash, and use the radix flush in radix environment. Provide a way for IS=2 (LPID flush) to specify the radix mode of the partition. Have KVM pass in the radix mode of the guest. Take out the flushes from early cputable/dt_cpu_ftrs detection hooks, and move it later in the boot process after, the MMU registers are set up and before relocation is first turned on. The TLB flush is no longer called when restoring from deep idle states. This was not be done as a separate step because booting secondaries uses the same cpu_restore as idle restore, which needs the TLB flush. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-23 15:15:50 +00:00
powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID This change restores and formalises the behaviour that access to NULL or other user addresses by the kernel during boot should fault rather than succeed and modify memory. This was inadvertently broken when fixing another bug, because it was previously not well defined and only worked by chance. powerpc/64s/radix uses high address bits to select an address space "quadrant", which determines which PID and LPID are used to translate the rest of the address (effective PID, effective LPID). The kernel mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So the kernel page tables are installed in the PID 0 process table entry. An address at 0x0... selects quadrant 0, which uses PID=PIDR for translating the rest of the address (that is, it uses the value of the PIDR register as the effective PID). If PIDR=0, then the translation is performed with the PID 0 process table entry page tables. This is the kernel mapping, so we effectively get another copy of the kernel address space at 0. A NULL pointer access will access physical memory address 0. To prevent duplicating the kernel address space in quadrant 0, this patch allocates a guard PID containing no translations, and initializes PIDR with this during boot, before the MMU is switched on. Any kernel access to quadrant 0 will use this guard PID for translation and find no valid mappings, and therefore fault. After boot, this PID will be switchd away to user context PIDs, but those contain user mappings (and usually NULL pointer protection) rather than kernel mapping, which is much safer (and by design). It may be in future this is tightened further, which the guard PID could be used for. Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table"), introduced this problem because it zeroes PIDR at boot. However previously the value was inherited from firmware or kexec, which is not robust and can be zero (e.g., mambo). Fixes: 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table") Cc: stable@vger.kernel.org # v4.15+ Reported-by: Florian Weimer <fweimer@redhat.com> Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-07 01:20:02 +00:00
radix__switch_mmu_context(NULL, &init_mm);
tlbiel_all();
/* Make sure userspace can't change the AMR */
mtspr(SPRN_UAMOR, 0);
}
void radix__mmu_cleanup_all(void)
{
unsigned long lpcr;
if (!firmware_has_feature(FW_FEATURE_LPAR)) {
lpcr = mfspr(SPRN_LPCR);
mtspr(SPRN_LPCR, lpcr & ~LPCR_UPRT);
set_ptcr_when_no_uv(0);
powernv_set_nmmu_ptcr(0);
radix__flush_tlb_all();
}
}
#ifdef CONFIG_MEMORY_HOTPLUG
static void free_pte_table(pte_t *pte_start, pmd_t *pmd)
{
pte_t *pte;
int i;
for (i = 0; i < PTRS_PER_PTE; i++) {
pte = pte_start + i;
if (!pte_none(*pte))
return;
}
pte_free_kernel(&init_mm, pte_start);
pmd_clear(pmd);
}
static void free_pmd_table(pmd_t *pmd_start, pud_t *pud)
{
pmd_t *pmd;
int i;
for (i = 0; i < PTRS_PER_PMD; i++) {
pmd = pmd_start + i;
if (!pmd_none(*pmd))
return;
}
pmd_free(&init_mm, pmd_start);
pud_clear(pud);
}
static void free_pud_table(pud_t *pud_start, p4d_t *p4d)
{
pud_t *pud;
int i;
for (i = 0; i < PTRS_PER_PUD; i++) {
pud = pud_start + i;
if (!pud_none(*pud))
return;
}
pud_free(&init_mm, pud_start);
p4d_clear(p4d);
}
static void remove_pte_table(pte_t *pte_start, unsigned long addr,
unsigned long end)
{
unsigned long next;
pte_t *pte;
pte = pte_start + pte_index(addr);
for (; addr < end; addr = next, pte++) {
next = (addr + PAGE_SIZE) & PAGE_MASK;
if (next > end)
next = end;
if (!pte_present(*pte))
continue;
if (!PAGE_ALIGNED(addr) || !PAGE_ALIGNED(next)) {
/*
* The vmemmap_free() and remove_section_mapping()
* codepaths call us with aligned addresses.
*/
WARN_ONCE(1, "%s: unaligned range\n", __func__);
continue;
}
pte_clear(&init_mm, addr, pte);
}
}
static void __meminit remove_pmd_table(pmd_t *pmd_start, unsigned long addr,
unsigned long end)
{
unsigned long next;
pte_t *pte_base;
pmd_t *pmd;
pmd = pmd_start + pmd_index(addr);
for (; addr < end; addr = next, pmd++) {
next = pmd_addr_end(addr, end);
if (!pmd_present(*pmd))
continue;
if (pmd_is_leaf(*pmd)) {
powerpc/mm/radix: Remove split_kernel_mapping() We split the page table mapping on memory unplug if the linear range was mapped with huge page mapping (for ex: 1G) The page table splitting code has a few issues: 1. Recursive locking -------------------- Memory unplug path takes cpu_hotplug_lock and calls stop_machine() for splitting the mappings. However stop_machine() takes cpu_hotplug_lock again causing deadlock. 2. BUG: sleeping function called from in_atomic() context --------------------------------------------------------- Memory unplug path (remove_pagetable) takes init_mm.page_table_lock spinlock and later calls stop_machine() which does wait_for_completion() 3. Bad unlock unbalance ----------------------- Memory unplug path takes init_mm.page_table_lock spinlock and calls stop_machine(). The stop_machine thread function runs in a different thread context (migration thread) which tries to release and reaquire ptl. Releasing ptl from a different thread than which acquired it causes bad unlock unbalance. These problems can be avoided if we avoid mapping hot-plugged memory with 1G mapping, thereby removing the need for splitting them during unplug. The kernel always make sure the minimum unplug request is SUBSECTION_SIZE for device memory and SECTION_SIZE for regular memory. In preparation for such a change remove page table splitting support. This essentially is a revert of commit 4dd5f8a99e791 ("powerpc/mm/radix: Split linear mapping on hot-unplug") Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-4-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:24 +00:00
if (!IS_ALIGNED(addr, PMD_SIZE) ||
!IS_ALIGNED(next, PMD_SIZE)) {
WARN_ONCE(1, "%s: unaligned range\n", __func__);
continue;
}
pte_clear(&init_mm, addr, (pte_t *)pmd);
continue;
}
pte_base = (pte_t *)pmd_page_vaddr(*pmd);
remove_pte_table(pte_base, addr, next);
free_pte_table(pte_base, pmd);
}
}
static void __meminit remove_pud_table(pud_t *pud_start, unsigned long addr,
unsigned long end)
{
unsigned long next;
pmd_t *pmd_base;
pud_t *pud;
pud = pud_start + pud_index(addr);
for (; addr < end; addr = next, pud++) {
next = pud_addr_end(addr, end);
if (!pud_present(*pud))
continue;
if (pud_is_leaf(*pud)) {
powerpc/mm/radix: Remove split_kernel_mapping() We split the page table mapping on memory unplug if the linear range was mapped with huge page mapping (for ex: 1G) The page table splitting code has a few issues: 1. Recursive locking -------------------- Memory unplug path takes cpu_hotplug_lock and calls stop_machine() for splitting the mappings. However stop_machine() takes cpu_hotplug_lock again causing deadlock. 2. BUG: sleeping function called from in_atomic() context --------------------------------------------------------- Memory unplug path (remove_pagetable) takes init_mm.page_table_lock spinlock and later calls stop_machine() which does wait_for_completion() 3. Bad unlock unbalance ----------------------- Memory unplug path takes init_mm.page_table_lock spinlock and calls stop_machine(). The stop_machine thread function runs in a different thread context (migration thread) which tries to release and reaquire ptl. Releasing ptl from a different thread than which acquired it causes bad unlock unbalance. These problems can be avoided if we avoid mapping hot-plugged memory with 1G mapping, thereby removing the need for splitting them during unplug. The kernel always make sure the minimum unplug request is SUBSECTION_SIZE for device memory and SECTION_SIZE for regular memory. In preparation for such a change remove page table splitting support. This essentially is a revert of commit 4dd5f8a99e791 ("powerpc/mm/radix: Split linear mapping on hot-unplug") Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-4-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:24 +00:00
if (!IS_ALIGNED(addr, PUD_SIZE) ||
!IS_ALIGNED(next, PUD_SIZE)) {
WARN_ONCE(1, "%s: unaligned range\n", __func__);
continue;
}
pte_clear(&init_mm, addr, (pte_t *)pud);
continue;
}
pmd_base = (pmd_t *)pud_page_vaddr(*pud);
remove_pmd_table(pmd_base, addr, next);
free_pmd_table(pmd_base, pud);
}
}
static void __meminit remove_pagetable(unsigned long start, unsigned long end)
{
unsigned long addr, next;
pud_t *pud_base;
pgd_t *pgd;
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
p4d_t *p4d;
spin_lock(&init_mm.page_table_lock);
for (addr = start; addr < end; addr = next) {
next = pgd_addr_end(addr, end);
pgd = pgd_offset_k(addr);
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
p4d = p4d_offset(pgd, addr);
if (!p4d_present(*p4d))
continue;
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
if (p4d_is_leaf(*p4d)) {
powerpc/mm/radix: Remove split_kernel_mapping() We split the page table mapping on memory unplug if the linear range was mapped with huge page mapping (for ex: 1G) The page table splitting code has a few issues: 1. Recursive locking -------------------- Memory unplug path takes cpu_hotplug_lock and calls stop_machine() for splitting the mappings. However stop_machine() takes cpu_hotplug_lock again causing deadlock. 2. BUG: sleeping function called from in_atomic() context --------------------------------------------------------- Memory unplug path (remove_pagetable) takes init_mm.page_table_lock spinlock and later calls stop_machine() which does wait_for_completion() 3. Bad unlock unbalance ----------------------- Memory unplug path takes init_mm.page_table_lock spinlock and calls stop_machine(). The stop_machine thread function runs in a different thread context (migration thread) which tries to release and reaquire ptl. Releasing ptl from a different thread than which acquired it causes bad unlock unbalance. These problems can be avoided if we avoid mapping hot-plugged memory with 1G mapping, thereby removing the need for splitting them during unplug. The kernel always make sure the minimum unplug request is SUBSECTION_SIZE for device memory and SECTION_SIZE for regular memory. In preparation for such a change remove page table splitting support. This essentially is a revert of commit 4dd5f8a99e791 ("powerpc/mm/radix: Split linear mapping on hot-unplug") Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-4-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:24 +00:00
if (!IS_ALIGNED(addr, P4D_SIZE) ||
!IS_ALIGNED(next, P4D_SIZE)) {
WARN_ONCE(1, "%s: unaligned range\n", __func__);
continue;
}
pte_clear(&init_mm, addr, (pte_t *)pgd);
continue;
}
powerpc: add support for folded p4d page tables Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 23:46:44 +00:00
pud_base = (pud_t *)p4d_page_vaddr(*p4d);
remove_pud_table(pud_base, addr, next);
free_pud_table(pud_base, p4d);
}
spin_unlock(&init_mm.page_table_lock);
radix__flush_tlb_kernel_range(start, end);
}
int __meminit radix__create_section_mapping(unsigned long start,
unsigned long end, int nid,
pgprot_t prot)
{
if (end >= RADIX_VMALLOC_START) {
pr_warn("Outside the supported range\n");
return -1;
}
powerpc/mm/radix: Create separate mappings for hot-plugged memory To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183e23e ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Fold in fix from Aneesh spotted by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
2020-07-09 13:19:25 +00:00
return create_physical_mapping(__pa(start), __pa(end),
radix_mem_block_size, nid, prot);
}
int __meminit radix__remove_section_mapping(unsigned long start, unsigned long end)
{
remove_pagetable(start, end);
return 0;
}
#endif /* CONFIG_MEMORY_HOTPLUG */
#ifdef CONFIG_SPARSEMEM_VMEMMAP
static int __map_kernel_page_nid(unsigned long ea, unsigned long pa,
pgprot_t flags, unsigned int map_page_size,
int nid)
{
return __map_kernel_page(ea, pa, flags, map_page_size, nid, 0, 0);
}
int __meminit radix__vmemmap_create_mapping(unsigned long start,
unsigned long page_size,
unsigned long phys)
{
/* Create a PTE encoding */
unsigned long flags = _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_KERNEL_RW;
int nid = early_pfn_to_nid(phys >> PAGE_SHIFT);
int ret;
if ((start + page_size) >= RADIX_VMEMMAP_END) {
pr_warn("Outside the supported range\n");
return -1;
}
ret = __map_kernel_page_nid(start, phys, __pgprot(flags), page_size, nid);
BUG_ON(ret);
return 0;
}
#ifdef CONFIG_MEMORY_HOTPLUG
void __meminit radix__vmemmap_remove_mapping(unsigned long start, unsigned long page_size)
{
remove_pagetable(start, start + page_size);
}
#endif
#endif
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
unsigned long radix__pmd_hugepage_update(struct mm_struct *mm, unsigned long addr,
pmd_t *pmdp, unsigned long clr,
unsigned long set)
{
unsigned long old;
#ifdef CONFIG_DEBUG_VM
WARN_ON(!radix__pmd_trans_huge(*pmdp) && !pmd_devmap(*pmdp));
assert_spin_locked(pmd_lockptr(mm, pmdp));
#endif
old = radix__pte_update(mm, addr, (pte_t *)pmdp, clr, set, 1);
trace_hugepage_update(addr, old, clr, set);
return old;
}
pmd_t radix__pmdp_collapse_flush(struct vm_area_struct *vma, unsigned long address,
pmd_t *pmdp)
{
pmd_t pmd;
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
VM_BUG_ON(radix__pmd_trans_huge(*pmdp));
VM_BUG_ON(pmd_devmap(*pmdp));
/*
* khugepaged calls this for normal pmd
*/
pmd = *pmdp;
pmd_clear(pmdp);
/*
* pmdp collapse_flush need to ensure that there are no parallel gup
* walk after this call. This is needed so that we can have stable
* page ref count when collapsing a page. We don't allow a collapse page
* if we have gup taken on the page. We can ensure that by sending IPI
* because gup walk happens with IRQ disabled.
*/
serialize_against_pte_lookup(vma->vm_mm);
radix__flush_tlb_collapsed_pmd(vma->vm_mm, address);
return pmd;
}
/*
* For us pgtable_t is pte_t *. Inorder to save the deposisted
* page table, we consider the allocated page table as a list
* head. On withdraw we need to make sure we zero out the used
* list_head memory area.
*/
void radix__pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
pgtable_t pgtable)
{
struct list_head *lh = (struct list_head *) pgtable;
assert_spin_locked(pmd_lockptr(mm, pmdp));
/* FIFO */
if (!pmd_huge_pte(mm, pmdp))
INIT_LIST_HEAD(lh);
else
list_add(lh, (struct list_head *) pmd_huge_pte(mm, pmdp));
pmd_huge_pte(mm, pmdp) = pgtable;
}
pgtable_t radix__pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
{
pte_t *ptep;
pgtable_t pgtable;
struct list_head *lh;
assert_spin_locked(pmd_lockptr(mm, pmdp));
/* FIFO */
pgtable = pmd_huge_pte(mm, pmdp);
lh = (struct list_head *) pgtable;
if (list_empty(lh))
pmd_huge_pte(mm, pmdp) = NULL;
else {
pmd_huge_pte(mm, pmdp) = (pgtable_t) lh->next;
list_del(lh);
}
ptep = (pte_t *) pgtable;
*ptep = __pte(0);
ptep++;
*ptep = __pte(0);
return pgtable;
}
pmd_t radix__pmdp_huge_get_and_clear(struct mm_struct *mm,
unsigned long addr, pmd_t *pmdp)
{
pmd_t old_pmd;
unsigned long old;
old = radix__pmd_hugepage_update(mm, addr, pmdp, ~0UL, 0);
old_pmd = __pmd(old);
return old_pmd;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
void radix__ptep_set_access_flags(struct vm_area_struct *vma, pte_t *ptep,
pte_t entry, unsigned long address, int psize)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long set = pte_val(entry) & (_PAGE_DIRTY | _PAGE_ACCESSED |
_PAGE_RW | _PAGE_EXEC);
unsigned long change = pte_val(entry) ^ pte_val(*ptep);
/*
* To avoid NMMU hang while relaxing access, we need mark
* the pte invalid in between.
*/
if ((change & _PAGE_RW) && atomic_read(&mm->context.copros) > 0) {
unsigned long old_pte, new_pte;
old_pte = __radix_pte_update(ptep, _PAGE_PRESENT, _PAGE_INVALID);
/*
* new value of pte
*/
new_pte = old_pte | set;
radix__flush_tlb_page_psize(mm, address, psize);
__radix_pte_update(ptep, _PAGE_INVALID, new_pte);
} else {
__radix_pte_update(ptep, 0, set);
/*
* Book3S does not require a TLB flush when relaxing access
* restrictions when the address space is not attached to a
* NMMU, because the core MMU will reload the pte after taking
* an access fault, which is defined by the architectue.
*/
}
/* See ptesync comment in radix__set_pte_at */
}
void radix__ptep_modify_prot_commit(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep,
pte_t old_pte, pte_t pte)
{
struct mm_struct *mm = vma->vm_mm;
/*
* To avoid NMMU hang while relaxing access we need to flush the tlb before
* we set the new value. We need to do this only for radix, because hash
* translation does flush when updating the linux pte.
*/
if (is_pte_rw_upgrade(pte_val(old_pte), pte_val(pte)) &&
(atomic_read(&mm->context.copros) > 0))
radix__flush_tlb_page(vma, addr);
set_pte_at(mm, addr, ptep, pte);
}
int __init arch_ioremap_pud_supported(void)
{
/* HPT does not cope with large pages in the vmalloc area */
return radix_enabled();
}
int __init arch_ioremap_pmd_supported(void)
{
return radix_enabled();
}
int p4d_free_pud_page(p4d_t *p4d, unsigned long addr)
{
return 0;
}
int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
{
pte_t *ptep = (pte_t *)pud;
pte_t new_pud = pfn_pte(__phys_to_pfn(addr), prot);
if (!radix_enabled())
return 0;
set_pte_at(&init_mm, 0 /* radix unused */, ptep, new_pud);
return 1;
}
int pud_clear_huge(pud_t *pud)
{
if (pud_huge(*pud)) {
pud_clear(pud);
return 1;
}
return 0;
}
int pud_free_pmd_page(pud_t *pud, unsigned long addr)
{
pmd_t *pmd;
int i;
pmd = (pmd_t *)pud_page_vaddr(*pud);
pud_clear(pud);
flush_tlb_kernel_range(addr, addr + PUD_SIZE);
for (i = 0; i < PTRS_PER_PMD; i++) {
if (!pmd_none(pmd[i])) {
pte_t *pte;
pte = (pte_t *)pmd_page_vaddr(pmd[i]);
pte_free_kernel(&init_mm, pte);
}
}
pmd_free(&init_mm, pmd);
return 1;
}
int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot)
{
pte_t *ptep = (pte_t *)pmd;
pte_t new_pmd = pfn_pte(__phys_to_pfn(addr), prot);
if (!radix_enabled())
return 0;
set_pte_at(&init_mm, 0 /* radix unused */, ptep, new_pmd);
return 1;
}
int pmd_clear_huge(pmd_t *pmd)
{
if (pmd_huge(*pmd)) {
pmd_clear(pmd);
return 1;
}
return 0;
}
int pmd_free_pte_page(pmd_t *pmd, unsigned long addr)
{
pte_t *pte;
pte = (pte_t *)pmd_page_vaddr(*pmd);
pmd_clear(pmd);
flush_tlb_kernel_range(addr, addr + PMD_SIZE);
pte_free_kernel(&init_mm, pte);
return 1;
}
int __init arch_ioremap_p4d_supported(void)
{
return 0;
}