drivers/cxl/core/Makefile

# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_CXL_BUS) += cxl_core.o
obj-$(CONFIG_CXL_SUSPEND) += suspend.o

ccflags-y += -I$(srctree)/drivers/cxl
cxl_core-y := port.o
cxl_core-y += pmem.o
cxl_core-y += regs.o
cxl_core-y += memdev.o
cxl_core-y += mbox.o
cxl_core-y += pci.o
cxl_core-y += hdm.o
cxl: Move cxl_core to new directory CXL core is growing, and it's already arguably unmanageable. To support future growth, move core functionality to a new directory and rename the file to represent just bus support. Future work will remove non-bus functionality. Note that mem.h is renamed to cxlmem.h to avoid a namespace collision with the global ARCH=um mem.h header. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162792537866.368511.8915631504621088321.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2021-08-02 10:29:38 -07:00			`# SPDX-License-Identifier: GPL-2.0`
			`obj-$(CONFIG_CXL_BUS) += cxl_core.o`
PM: CXL: Disable suspend The CXL specification claims S3 support at a hardware level, but at a system software level there are some missing pieces. Section 9.4 (CXL 2.0) rightly claims that "CXL mem adapters may need aux power to retain memory context across S3", but there is no enumeration mechanism for the OS to determine if a given adapter has that support. Moreover the save state and resume image for the system may inadvertantly end up in a CXL device that needs to be restored before the save state is recoverable. I.e. a circular dependency that is not resolvable without a third party save-area. Arrange for the cxl_mem driver to fail S3 attempts. This still nominaly allows for suspend, but requires unbinding all CXL memory devices before the suspend to ensure the typical DRAM flow is taken. The cxl_mem unbind flow is intended to also tear down all CXL memory regions associated with a given cxl_memdev. It is reasonable to assume that any device participating in a System RAM range published in the EFI memory map is covered by aux power and save-area outside the device itself. So this restriction can be minimized in the future once pre-existing region enumeration support arrives, and perhaps a spec update to clarify if the EFI memory map is sufficent for determining the range of devices managed by platform-firmware for S3 support. Per Rafael, if the CXL configuration prevents suspend then it should fail early before tasks are frozen, and mem_sleep should stop showing 'mem' as an option [1]. Effectively CXL augments the platform suspend ->valid() op since, for example, the ACPI ops are not aware of the CXL / PCI dependencies. Given the split role of platform firmware vs OS provisioned CXL memory it is up to the cxl_mem driver to determine if the CXL configuration has elements that platform firmware may not be prepared to restore. Link: https://lore.kernel.org/r/CAJZ5v0hGVN_=3iU8OLpHY3Ak35T5+JcBM-qs8SbojKrpd0VXsA@mail.gmail.com [1] Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/165066828317.3907920.5690432272182042556.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2022-04-22 15:58:11 -07:00			`obj-$(CONFIG_CXL_SUSPEND) += suspend.o`
cxl: Move cxl_core to new directory CXL core is growing, and it's already arguably unmanageable. To support future growth, move core functionality to a new directory and rename the file to represent just bus support. Future work will remove non-bus functionality. Note that mem.h is renamed to cxlmem.h to avoid a namespace collision with the global ARCH=um mem.h header. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162792537866.368511.8915631504621088321.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2021-08-02 10:29:38 -07:00
cxl/core: Convert to EXPORT_SYMBOL_NS_GPL It turns out that the usb example of specifying the subsystem namespace at build time is not preferred. The rationale for that preference has become more apparent as CXL patches with plain EXPORT_SYMBOL_GPL beg the question, "why would any code other than CXL care about this symbol?". Make the namespace explicit. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/163676356810.3618264.601632777702192938.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2021-11-12 16:32:58 -08:00			`ccflags-y += -I$(srctree)/drivers/cxl`
cxl/core/port: Rename bus.c to port.c Given it is dominated by port infrastructure, and will only acquire more, rename bus.c to port.c. Reviewed-by: Ben Widawsky <ben.widawsky@intel.com> Link: https://lore.kernel.org/r/164298416136.3018233.15442880970000855425.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2022-01-23 16:29:21 -08:00			`cxl_core-y := port.o`
cxl/core: Move pmem functionality Refactor the pmem / nvdimm-bridge functionality from core/bus.c to core/pmem.c. Introduce drivers/core/core.h to communicate data structures and helpers between the core bus and other functionality that registers devices on the bus. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162792538899.368511.3881663908293411300.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2021-08-02 10:29:49 -07:00			`cxl_core-y += pmem.o`
cxl/core: Move register mapping infrastructure The register mapping infrastructure is large enough to move to its own compilation unit. This also cleans up an unnecessary include of <mem.h> core/bus.c. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162800068975.665205.12895551621746585289.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2021-08-03 07:25:38 -07:00			`cxl_core-y += regs.o`
cxl/core: Move memdev management to core The motivation for moving cxl_memdev allocation to the core (beyond better file organization of sysfs attributes in core/ and drivers in cxl/), is that device lifetime is longer than module lifetime. The cxl_pci module should be free to come and go without needing to coordinate with devices that need the text associated with cxl_memdev_release() to stay resident. The move fixes a use after free bug when looping driver load / unload with CONFIG_DEBUG_KOBJECT_RELEASE=y. Another motivation for disconnecting cxl_memdev creation from cxl_pci is to enable other drivers, like a unit test driver, to registers memdevs. Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices") Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162792540495.368511.9748638751088219595.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2021-08-02 10:30:05 -07:00			`cxl_core-y += memdev.o`
cxl/mbox: Move mailbox and other non-PCI specific infrastructure to the core Now that the internals of mailbox operations are abstracted from the PCI specifics a bulk of infrastructure can move to the core. The CXL_PMEM driver intends to proxy LIBNVDIMM UAPI and driver requests to the equivalent functionality provided by the CXL hardware mailbox interface. In support of that intent move the mailbox implementation to a shared location for the CXL_PCI driver native IOCTL path and CXL_PMEM nvdimm command proxy path to share. A unit test framework seeks to implement a unit test backend transport for mailbox commands to communicate mocked up payloads. It can reuse all of the mailbox infrastructure minus the PCI specifics, so that also gets moved to the core. Finally with the mailbox infrastructure and ioctl handling being transport generic there is no longer any need to pass file file_operations to devm_cxl_add_memdev(). That allows all the ioctl boilerplate to move into the core for unit test reuse. No functional change intended, just code movement. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/163116435233.2460985.16197340449713287180.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2021-09-08 22:12:32 -07:00			`cxl_core-y += mbox.o`
cxl/core: Generalize dport enumeration in the core The core houses infrastructure for decoder resources. A CXL port's dports are more closely related to decoder infrastructure than topology enumeration. Implement generic PCI based dport enumeration in the core, i.e. arrange for existing root port enumeration from cxl_acpi to share code with switch port enumeration which just amounts to a small difference in a pci_walk_bus() invocation once the appropriate 'struct pci_bus' has been retrieved. Set the convention that decoder objects are registered after all dports are enumerated. This enables userspace to know when the CXL core is finished establishing 'dportX' links underneath the 'portX' object. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/164368114191.354031.5270501846455462665.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2022-01-31 18:10:04 -08:00			`cxl_core-y += pci.o`
cxl/core/hdm: Add CXL standard decoder enumeration to the core Unlike the decoder enumeration for "root decoders" described by platform firmware, standard decoders can be enumerated from the component registers space once the base address has been identified (via PCI, ACPI, or another mechanism). Add common infrastructure for HDM (Host-managed-Device-Memory) Decoder enumeration and share it between host-bridge, upstream switch port, and cxl_test defined decoders. The locking model for switch level decoders is to hold the port lock over the enumeration. This facilitates moving the dport and decoder enumeration to a 'port' driver. For now, the only enumerator of decoder resources is the cxl_acpi root driver. Co-developed-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/164374688404.395335.9239248252443123526.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 2022-02-01 12:24:30 -08:00			`cxl_core-y += hdm.o`