linux/include/acpi/acoutput.h

186 lines
8.1 KiB
C
Raw Normal View History

/******************************************************************************
*
* Name: acoutput.h -- debug output
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __ACOUTPUT_H__
#define __ACOUTPUT_H__
/*
* Debug levels and component IDs. These are used to control the
* granularity of the output of the DEBUG_PRINT macro -- on a per-
* component basis and a per-exception-type basis.
*/
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
/* Component IDs are used in the global "DebugLayer" */
#define ACPI_UTILITIES 0x00000001
#define ACPI_HARDWARE 0x00000002
#define ACPI_EVENTS 0x00000004
#define ACPI_TABLES 0x00000008
#define ACPI_NAMESPACE 0x00000010
#define ACPI_PARSER 0x00000020
#define ACPI_DISPATCHER 0x00000040
#define ACPI_EXECUTER 0x00000080
#define ACPI_RESOURCES 0x00000100
#define ACPI_CA_DEBUGGER 0x00000200
#define ACPI_OS_SERVICES 0x00000400
#define ACPI_CA_DISASSEMBLER 0x00000800
/* Component IDs for ACPI tools and utilities */
#define ACPI_COMPILER 0x00001000
#define ACPI_TOOLS 0x00002000
#define ACPI_ALL_COMPONENTS 0x00003FFF
#define ACPI_COMPONENT_DEFAULT (ACPI_ALL_COMPONENTS)
/* Component IDs reserved for ACPI drivers */
#define ACPI_ALL_DRIVERS 0xFFFF0000
/*
* Raw debug output levels, do not use these in the DEBUG_PRINT macros
*/
#define ACPI_LV_ERROR 0x00000001
#define ACPI_LV_WARN 0x00000002
#define ACPI_LV_INIT 0x00000004
#define ACPI_LV_DEBUG_OBJECT 0x00000008
#define ACPI_LV_INFO 0x00000010
#define ACPI_LV_ALL_EXCEPTIONS 0x0000001F
/* Trace verbosity level 1 [Standard Trace Level] */
#define ACPI_LV_INIT_NAMES 0x00000020
#define ACPI_LV_PARSE 0x00000040
#define ACPI_LV_LOAD 0x00000080
#define ACPI_LV_DISPATCH 0x00000100
#define ACPI_LV_EXEC 0x00000200
#define ACPI_LV_NAMES 0x00000400
#define ACPI_LV_OPREGION 0x00000800
#define ACPI_LV_BFIELD 0x00001000
#define ACPI_LV_TABLES 0x00002000
#define ACPI_LV_VALUES 0x00004000
#define ACPI_LV_OBJECTS 0x00008000
#define ACPI_LV_RESOURCES 0x00010000
#define ACPI_LV_USER_REQUESTS 0x00020000
#define ACPI_LV_PACKAGE 0x00040000
#define ACPI_LV_VERBOSITY1 0x0007FF40 | ACPI_LV_ALL_EXCEPTIONS
/* Trace verbosity level 2 [Function tracing and memory allocation] */
#define ACPI_LV_ALLOCATIONS 0x00100000
#define ACPI_LV_FUNCTIONS 0x00200000
#define ACPI_LV_OPTIMIZATIONS 0x00400000
#define ACPI_LV_VERBOSITY2 0x00700000 | ACPI_LV_VERBOSITY1
#define ACPI_LV_ALL ACPI_LV_VERBOSITY2
/* Trace verbosity level 3 [Threading, I/O, and Interrupts] */
#define ACPI_LV_MUTEX 0x01000000
#define ACPI_LV_THREADS 0x02000000
#define ACPI_LV_IO 0x04000000
#define ACPI_LV_INTERRUPTS 0x08000000
#define ACPI_LV_VERBOSITY3 0x0F000000 | ACPI_LV_VERBOSITY2
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
/* Exceptionally verbose output -- also used in the global "DebugLevel" */
#define ACPI_LV_AML_DISASSEMBLE 0x10000000
#define ACPI_LV_VERBOSE_INFO 0x20000000
#define ACPI_LV_FULL_TABLES 0x40000000
#define ACPI_LV_EVENTS 0x80000000
#define ACPI_LV_VERBOSE 0xF0000000
/*
* Debug level macros that are used in the DEBUG_PRINT macros
*/
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 04:00:00 +00:00
#define ACPI_DEBUG_LEVEL(dl) (u32) dl,ACPI_DEBUG_PARAMETERS
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
/* Exception level -- used in the global "DebugLevel" */
#define ACPI_DB_INIT ACPI_DEBUG_LEVEL (ACPI_LV_INIT)
#define ACPI_DB_DEBUG_OBJECT ACPI_DEBUG_LEVEL (ACPI_LV_DEBUG_OBJECT)
#define ACPI_DB_INFO ACPI_DEBUG_LEVEL (ACPI_LV_INFO)
#define ACPI_DB_ALL_EXCEPTIONS ACPI_DEBUG_LEVEL (ACPI_LV_ALL_EXCEPTIONS)
/*
* These two levels are essentially obsolete, all instances in the
* ACPICA core code have been replaced by ACPI_ERROR and ACPI_WARNING
* (Kept here because some drivers may still use them)
*/
#define ACPI_DB_ERROR ACPI_DEBUG_LEVEL (ACPI_LV_ERROR)
#define ACPI_DB_WARN ACPI_DEBUG_LEVEL (ACPI_LV_WARN)
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
/* Trace level -- also used in the global "DebugLevel" */
#define ACPI_DB_INIT_NAMES ACPI_DEBUG_LEVEL (ACPI_LV_INIT_NAMES)
#define ACPI_DB_THREADS ACPI_DEBUG_LEVEL (ACPI_LV_THREADS)
#define ACPI_DB_PARSE ACPI_DEBUG_LEVEL (ACPI_LV_PARSE)
#define ACPI_DB_DISPATCH ACPI_DEBUG_LEVEL (ACPI_LV_DISPATCH)
#define ACPI_DB_LOAD ACPI_DEBUG_LEVEL (ACPI_LV_LOAD)
#define ACPI_DB_EXEC ACPI_DEBUG_LEVEL (ACPI_LV_EXEC)
#define ACPI_DB_NAMES ACPI_DEBUG_LEVEL (ACPI_LV_NAMES)
#define ACPI_DB_OPREGION ACPI_DEBUG_LEVEL (ACPI_LV_OPREGION)
#define ACPI_DB_BFIELD ACPI_DEBUG_LEVEL (ACPI_LV_BFIELD)
#define ACPI_DB_TABLES ACPI_DEBUG_LEVEL (ACPI_LV_TABLES)
#define ACPI_DB_FUNCTIONS ACPI_DEBUG_LEVEL (ACPI_LV_FUNCTIONS)
#define ACPI_DB_OPTIMIZATIONS ACPI_DEBUG_LEVEL (ACPI_LV_OPTIMIZATIONS)
#define ACPI_DB_VALUES ACPI_DEBUG_LEVEL (ACPI_LV_VALUES)
#define ACPI_DB_OBJECTS ACPI_DEBUG_LEVEL (ACPI_LV_OBJECTS)
#define ACPI_DB_ALLOCATIONS ACPI_DEBUG_LEVEL (ACPI_LV_ALLOCATIONS)
#define ACPI_DB_RESOURCES ACPI_DEBUG_LEVEL (ACPI_LV_RESOURCES)
#define ACPI_DB_IO ACPI_DEBUG_LEVEL (ACPI_LV_IO)
#define ACPI_DB_INTERRUPTS ACPI_DEBUG_LEVEL (ACPI_LV_INTERRUPTS)
#define ACPI_DB_USER_REQUESTS ACPI_DEBUG_LEVEL (ACPI_LV_USER_REQUESTS)
#define ACPI_DB_PACKAGE ACPI_DEBUG_LEVEL (ACPI_LV_PACKAGE)
#define ACPI_DB_MUTEX ACPI_DEBUG_LEVEL (ACPI_LV_MUTEX)
#define ACPI_DB_ALL ACPI_DEBUG_LEVEL (ACPI_LV_ALL)
/* Defaults for debug_level, debug and normal */
#define ACPI_DEBUG_DEFAULT (ACPI_LV_INIT | ACPI_LV_WARN | ACPI_LV_ERROR | ACPI_LV_DEBUG_OBJECT)
#define ACPI_NORMAL_DEFAULT (ACPI_LV_INIT | ACPI_LV_WARN | ACPI_LV_ERROR | ACPI_LV_DEBUG_OBJECT)
#define ACPI_DEBUG_ALL (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL)
#endif /* __ACOUTPUT_H__ */