linux/drivers/regulator/s5m8767.c

977 lines
25 KiB
C
Raw Normal View History

/*
* s5m8767.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/regulator/of_regulator.h>
#define S5M8767_OPMODE_NORMAL_MODE 0x1
struct s5m8767_info {
struct device *dev;
struct sec_pmic_dev *iodev;
int num_regulators;
struct regulator_dev **rdev;
struct sec_opmode_data *opmode;
int ramp_delay;
bool buck2_ramp;
bool buck3_ramp;
bool buck4_ramp;
bool buck2_gpiodvs;
bool buck3_gpiodvs;
bool buck4_gpiodvs;
u8 buck2_vol[8];
u8 buck3_vol[8];
u8 buck4_vol[8];
int buck_gpios[3];
int buck_ds[3];
int buck_gpioindex;
};
struct sec_voltage_desc {
int max;
int min;
int step;
};
static const struct sec_voltage_desc buck_voltage_val1 = {
.max = 2225000,
.min = 650000,
.step = 6250,
};
static const struct sec_voltage_desc buck_voltage_val2 = {
.max = 1600000,
.min = 600000,
.step = 6250,
};
static const struct sec_voltage_desc buck_voltage_val3 = {
.max = 3000000,
.min = 750000,
.step = 12500,
};
static const struct sec_voltage_desc ldo_voltage_val1 = {
.max = 3950000,
.min = 800000,
.step = 50000,
};
static const struct sec_voltage_desc ldo_voltage_val2 = {
.max = 2375000,
.min = 800000,
.step = 25000,
};
static const struct sec_voltage_desc *reg_voltage_map[] = {
[S5M8767_LDO1] = &ldo_voltage_val2,
[S5M8767_LDO2] = &ldo_voltage_val2,
[S5M8767_LDO3] = &ldo_voltage_val1,
[S5M8767_LDO4] = &ldo_voltage_val1,
[S5M8767_LDO5] = &ldo_voltage_val1,
[S5M8767_LDO6] = &ldo_voltage_val2,
[S5M8767_LDO7] = &ldo_voltage_val2,
[S5M8767_LDO8] = &ldo_voltage_val2,
[S5M8767_LDO9] = &ldo_voltage_val1,
[S5M8767_LDO10] = &ldo_voltage_val1,
[S5M8767_LDO11] = &ldo_voltage_val1,
[S5M8767_LDO12] = &ldo_voltage_val1,
[S5M8767_LDO13] = &ldo_voltage_val1,
[S5M8767_LDO14] = &ldo_voltage_val1,
[S5M8767_LDO15] = &ldo_voltage_val2,
[S5M8767_LDO16] = &ldo_voltage_val1,
[S5M8767_LDO17] = &ldo_voltage_val1,
[S5M8767_LDO18] = &ldo_voltage_val1,
[S5M8767_LDO19] = &ldo_voltage_val1,
[S5M8767_LDO20] = &ldo_voltage_val1,
[S5M8767_LDO21] = &ldo_voltage_val1,
[S5M8767_LDO22] = &ldo_voltage_val1,
[S5M8767_LDO23] = &ldo_voltage_val1,
[S5M8767_LDO24] = &ldo_voltage_val1,
[S5M8767_LDO25] = &ldo_voltage_val1,
[S5M8767_LDO26] = &ldo_voltage_val1,
[S5M8767_LDO27] = &ldo_voltage_val1,
[S5M8767_LDO28] = &ldo_voltage_val1,
[S5M8767_BUCK1] = &buck_voltage_val1,
[S5M8767_BUCK2] = &buck_voltage_val2,
[S5M8767_BUCK3] = &buck_voltage_val2,
[S5M8767_BUCK4] = &buck_voltage_val2,
[S5M8767_BUCK5] = &buck_voltage_val1,
[S5M8767_BUCK6] = &buck_voltage_val1,
[S5M8767_BUCK7] = NULL,
[S5M8767_BUCK8] = NULL,
[S5M8767_BUCK9] = &buck_voltage_val3,
};
static unsigned int s5m8767_opmode_reg[][4] = {
/* {OFF, ON, LOWPOWER, SUSPEND} */
/* LDO1 ... LDO28 */
{0x0, 0x3, 0x2, 0x1}, /* LDO1 */
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x0, 0x0, 0x0},
{0x0, 0x3, 0x2, 0x1}, /* LDO5 */
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1}, /* LDO10 */
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1}, /* LDO15 */
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x0, 0x0, 0x0},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1}, /* LDO20 */
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x0, 0x0, 0x0},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1}, /* LDO25 */
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1},
{0x0, 0x3, 0x2, 0x1}, /* LDO28 */
/* BUCK1 ... BUCK9 */
{0x0, 0x3, 0x1, 0x1}, /* BUCK1 */
{0x0, 0x3, 0x1, 0x1},
{0x0, 0x3, 0x1, 0x1},
{0x0, 0x3, 0x1, 0x1},
{0x0, 0x3, 0x2, 0x1}, /* BUCK5 */
{0x0, 0x3, 0x1, 0x1},
{0x0, 0x3, 0x1, 0x1},
{0x0, 0x3, 0x1, 0x1},
{0x0, 0x3, 0x1, 0x1}, /* BUCK9 */
};
static int s5m8767_get_register(struct regulator_dev *rdev, int *reg,
int *enable_ctrl)
{
int i, reg_id = rdev_get_id(rdev);
unsigned int mode;
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
switch (reg_id) {
case S5M8767_LDO1 ... S5M8767_LDO2:
*reg = S5M8767_REG_LDO1CTRL + (reg_id - S5M8767_LDO1);
break;
case S5M8767_LDO3 ... S5M8767_LDO28:
*reg = S5M8767_REG_LDO3CTRL + (reg_id - S5M8767_LDO3);
break;
case S5M8767_BUCK1:
*reg = S5M8767_REG_BUCK1CTRL1;
break;
case S5M8767_BUCK2 ... S5M8767_BUCK4:
*reg = S5M8767_REG_BUCK2CTRL + (reg_id - S5M8767_BUCK2) * 9;
break;
case S5M8767_BUCK5:
*reg = S5M8767_REG_BUCK5CTRL1;
break;
case S5M8767_BUCK6 ... S5M8767_BUCK9:
*reg = S5M8767_REG_BUCK6CTRL1 + (reg_id - S5M8767_BUCK6) * 2;
break;
default:
return -EINVAL;
}
for (i = 0; i < s5m8767->num_regulators; i++) {
if (s5m8767->opmode[i].id == reg_id) {
mode = s5m8767->opmode[i].mode;
break;
}
}
if (i < s5m8767->num_regulators)
*enable_ctrl =
s5m8767_opmode_reg[reg_id][mode] << S5M8767_ENCTRL_SHIFT;
return 0;
}
static int s5m8767_reg_is_enabled(struct regulator_dev *rdev)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int ret, reg;
int mask = 0xc0, enable_ctrl;
regulator: s5m8767: Fix probe failure due to stack corruption The function sec_reg_read invokes regmap_read which expects unsigned int * as the destination address. The existing driver is passing address of local variable "val" which is u8. This causes the stack corruption and following dump is observed during probe. Hence change "val" from u8 to unsigned int. Unable to handle kernel paging request at virtual address 02410020 pgd = c0004000 [02410020] *pgd=00000000 Internal error: Oops: 80000005 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Not tainted (3.6.0-00696-g98a28b18-dirty #27) PC is at 0x2410020 LR is at _regulator_get_voltage+0x3c/0x70 pc : [<02410020>] lr : [<c02395d4>] psr: 20000013 sp : cf839b68 ip : 00000000 fp : cf92d410 r10: 0000cfd0 r9 : c06d9878 r8 : 0000f0a0 r7 : cf839b70 r6 : cf92d400 r5 : 00000011 r4 : cf000000 r3 : 02410020 r2 : 00000000 r1 : 00000048 r0 : cf000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel ........................... ................................. [<c02395d4>] (_regulator_get_voltage+0x3c/0x70) from [<c023ad80>] (print_constraints+0x50/0x36c) [<c023ad80>] (print_constraints+0x50/0x36c) from [<c023e504>] (set_machine_constraints+0xe8/0x2b0) [<c023e504>] (set_machine_constraints+0xe8/0x2b0) from [<c023e9c8>] (regulator_register+0x2fc/0x604) [<c023e9c8>] (regulator_register+0x2fc/0x604) from [<c049d628>] (s5m8767_pmic_probe+0x688/0x718) [<c049d628>] (s5m8767_pmic_probe+0x688/0x718) from [<c029915c>] (platform_drv_probe+0x18/0x1c) [<c029915c>] (platform_drv_probe+0x18/0x1c) from [<c0297dd0>] (really_probe+0x68/0x1f4) [<c0297dd0>] (really_probe+0x68/0x1f4) from [<c0298070>] (driver_probe_device+0x30/0x48) Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-12 03:27:00 +00:00
unsigned int val;
ret = s5m8767_get_register(rdev, &reg, &enable_ctrl);
if (ret == -EINVAL)
return 1;
else if (ret)
return ret;
ret = sec_reg_read(s5m8767->iodev, reg, &val);
if (ret)
return ret;
return (val & mask) == enable_ctrl;
}
static int s5m8767_reg_enable(struct regulator_dev *rdev)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int ret, reg;
int mask = 0xc0, enable_ctrl;
ret = s5m8767_get_register(rdev, &reg, &enable_ctrl);
if (ret)
return ret;
return sec_reg_update(s5m8767->iodev, reg, enable_ctrl, mask);
}
static int s5m8767_reg_disable(struct regulator_dev *rdev)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int ret, reg;
int mask = 0xc0, enable_ctrl;
ret = s5m8767_get_register(rdev, &reg, &enable_ctrl);
if (ret)
return ret;
return sec_reg_update(s5m8767->iodev, reg, ~mask, mask);
}
static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767)
{
int reg;
switch (reg_id) {
case S5M8767_LDO1 ... S5M8767_LDO2:
reg = S5M8767_REG_LDO1CTRL + (reg_id - S5M8767_LDO1);
break;
case S5M8767_LDO3 ... S5M8767_LDO28:
reg = S5M8767_REG_LDO3CTRL + (reg_id - S5M8767_LDO3);
break;
case S5M8767_BUCK1:
reg = S5M8767_REG_BUCK1CTRL2;
break;
case S5M8767_BUCK2:
reg = S5M8767_REG_BUCK2DVS1;
if (s5m8767->buck2_gpiodvs)
reg += s5m8767->buck_gpioindex;
break;
case S5M8767_BUCK3:
reg = S5M8767_REG_BUCK3DVS1;
if (s5m8767->buck3_gpiodvs)
reg += s5m8767->buck_gpioindex;
break;
case S5M8767_BUCK4:
reg = S5M8767_REG_BUCK4DVS1;
if (s5m8767->buck4_gpiodvs)
reg += s5m8767->buck_gpioindex;
break;
case S5M8767_BUCK5:
reg = S5M8767_REG_BUCK5CTRL2;
break;
case S5M8767_BUCK6 ... S5M8767_BUCK9:
reg = S5M8767_REG_BUCK6CTRL2 + (reg_id - S5M8767_BUCK6) * 2;
break;
default:
return -EINVAL;
}
return reg;
}
static int s5m8767_convert_voltage_to_sel(const struct sec_voltage_desc *desc,
int min_vol)
{
int selector = 0;
if (desc == NULL)
return -EINVAL;
if (min_vol > desc->max)
return -EINVAL;
if (min_vol < desc->min)
min_vol = desc->min;
selector = DIV_ROUND_UP(min_vol - desc->min, desc->step);
if (desc->min + desc->step * selector > desc->max)
return -EINVAL;
return selector;
}
static inline int s5m8767_set_high(struct s5m8767_info *s5m8767)
{
int temp_index = s5m8767->buck_gpioindex;
gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
return 0;
}
static inline int s5m8767_set_low(struct s5m8767_info *s5m8767)
{
int temp_index = s5m8767->buck_gpioindex;
gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
return 0;
}
static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int reg_id = rdev_get_id(rdev);
int old_index, index = 0;
u8 *buck234_vol = NULL;
switch (reg_id) {
case S5M8767_LDO1 ... S5M8767_LDO28:
break;
case S5M8767_BUCK1 ... S5M8767_BUCK6:
if (reg_id == S5M8767_BUCK2 && s5m8767->buck2_gpiodvs)
buck234_vol = &s5m8767->buck2_vol[0];
else if (reg_id == S5M8767_BUCK3 && s5m8767->buck3_gpiodvs)
buck234_vol = &s5m8767->buck3_vol[0];
else if (reg_id == S5M8767_BUCK4 && s5m8767->buck4_gpiodvs)
buck234_vol = &s5m8767->buck4_vol[0];
break;
case S5M8767_BUCK7 ... S5M8767_BUCK8:
return -EINVAL;
case S5M8767_BUCK9:
break;
default:
return -EINVAL;
}
/* buck234_vol != NULL means to control buck234 voltage via DVS GPIO */
if (buck234_vol) {
while (*buck234_vol != selector) {
buck234_vol++;
index++;
}
old_index = s5m8767->buck_gpioindex;
s5m8767->buck_gpioindex = index;
if (index > old_index)
return s5m8767_set_high(s5m8767);
else
return s5m8767_set_low(s5m8767);
} else {
return regulator_set_voltage_sel_regmap(rdev, selector);
}
}
static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_sel,
unsigned int new_sel)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
const struct sec_voltage_desc *desc;
int reg_id = rdev_get_id(rdev);
desc = reg_voltage_map[reg_id];
if ((old_sel < new_sel) && s5m8767->ramp_delay)
return DIV_ROUND_UP(desc->step * (new_sel - old_sel),
s5m8767->ramp_delay * 1000);
return 0;
}
static struct regulator_ops s5m8767_ops = {
.list_voltage = regulator_list_voltage_linear,
.is_enabled = s5m8767_reg_is_enabled,
.enable = s5m8767_reg_enable,
.disable = s5m8767_reg_disable,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = s5m8767_set_voltage_sel,
.set_voltage_time_sel = s5m8767_set_voltage_time_sel,
};
static struct regulator_ops s5m8767_buck78_ops = {
.is_enabled = s5m8767_reg_is_enabled,
.enable = s5m8767_reg_enable,
.disable = s5m8767_reg_disable,
};
#define s5m8767_regulator_desc(_name) { \
.name = #_name, \
.id = S5M8767_##_name, \
.ops = &s5m8767_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}
#define s5m8767_regulator_buck78_desc(_name) { \
.name = #_name, \
.id = S5M8767_##_name, \
.ops = &s5m8767_buck78_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}
static struct regulator_desc regulators[] = {
s5m8767_regulator_desc(LDO1),
s5m8767_regulator_desc(LDO2),
s5m8767_regulator_desc(LDO3),
s5m8767_regulator_desc(LDO4),
s5m8767_regulator_desc(LDO5),
s5m8767_regulator_desc(LDO6),
s5m8767_regulator_desc(LDO7),
s5m8767_regulator_desc(LDO8),
s5m8767_regulator_desc(LDO9),
s5m8767_regulator_desc(LDO10),
s5m8767_regulator_desc(LDO11),
s5m8767_regulator_desc(LDO12),
s5m8767_regulator_desc(LDO13),
s5m8767_regulator_desc(LDO14),
s5m8767_regulator_desc(LDO15),
s5m8767_regulator_desc(LDO16),
s5m8767_regulator_desc(LDO17),
s5m8767_regulator_desc(LDO18),
s5m8767_regulator_desc(LDO19),
s5m8767_regulator_desc(LDO20),
s5m8767_regulator_desc(LDO21),
s5m8767_regulator_desc(LDO22),
s5m8767_regulator_desc(LDO23),
s5m8767_regulator_desc(LDO24),
s5m8767_regulator_desc(LDO25),
s5m8767_regulator_desc(LDO26),
s5m8767_regulator_desc(LDO27),
s5m8767_regulator_desc(LDO28),
s5m8767_regulator_desc(BUCK1),
s5m8767_regulator_desc(BUCK2),
s5m8767_regulator_desc(BUCK3),
s5m8767_regulator_desc(BUCK4),
s5m8767_regulator_desc(BUCK5),
s5m8767_regulator_desc(BUCK6),
s5m8767_regulator_buck78_desc(BUCK7),
s5m8767_regulator_buck78_desc(BUCK8),
s5m8767_regulator_desc(BUCK9),
};
#ifdef CONFIG_OF
static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev,
struct sec_platform_data *pdata,
struct device_node *pmic_np)
{
int i, gpio;
for (i = 0; i < 3; i++) {
gpio = of_get_named_gpio(pmic_np,
"s5m8767,pmic-buck-dvs-gpios", i);
if (!gpio_is_valid(gpio)) {
dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
return -EINVAL;
}
pdata->buck_gpios[i] = gpio;
}
return 0;
}
static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev,
struct sec_platform_data *pdata,
struct device_node *pmic_np)
{
int i, gpio;
for (i = 0; i < 3; i++) {
gpio = of_get_named_gpio(pmic_np,
"s5m8767,pmic-buck-ds-gpios", i);
if (!gpio_is_valid(gpio)) {
dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
return -EINVAL;
}
pdata->buck_ds[i] = gpio;
}
return 0;
}
static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
struct sec_platform_data *pdata)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct device_node *pmic_np, *regulators_np, *reg_np;
struct sec_regulator_data *rdata;
struct sec_opmode_data *rmode;
unsigned int i, dvs_voltage_nr = 1, ret;
pmic_np = iodev->dev->of_node;
if (!pmic_np) {
dev_err(iodev->dev, "could not find pmic sub-node\n");
return -ENODEV;
}
regulators_np = of_find_node_by_name(pmic_np, "regulators");
if (!regulators_np) {
dev_err(iodev->dev, "could not find regulators sub-node\n");
return -EINVAL;
}
/* count the number of regulators to be supported in pmic */
pdata->num_regulators = of_get_child_count(regulators_np);
rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
pdata->num_regulators, GFP_KERNEL);
if (!rdata) {
dev_err(iodev->dev,
"could not allocate memory for regulator data\n");
return -ENOMEM;
}
rmode = devm_kzalloc(&pdev->dev, sizeof(*rmode) *
pdata->num_regulators, GFP_KERNEL);
if (!rdata) {
dev_err(iodev->dev,
"could not allocate memory for regulator mode\n");
return -ENOMEM;
}
pdata->regulators = rdata;
pdata->opmode = rmode;
for_each_child_of_node(regulators_np, reg_np) {
for (i = 0; i < ARRAY_SIZE(regulators); i++)
if (!of_node_cmp(reg_np->name, regulators[i].name))
break;
if (i == ARRAY_SIZE(regulators)) {
dev_warn(iodev->dev,
"don't know how to configure regulator %s\n",
reg_np->name);
continue;
}
rdata->id = i;
rdata->initdata = of_get_regulator_init_data(
&pdev->dev, reg_np);
rdata->reg_node = reg_np;
rdata++;
rmode->id = i;
if (of_property_read_u32(reg_np, "op_mode",
&rmode->mode)) {
dev_warn(iodev->dev,
"no op_mode property property at %s\n",
reg_np->full_name);
rmode->mode = S5M8767_OPMODE_NORMAL_MODE;
}
rmode++;
}
if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL))
pdata->buck2_gpiodvs = true;
if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL))
pdata->buck3_gpiodvs = true;
if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL))
pdata->buck4_gpiodvs = true;
if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
pdata->buck4_gpiodvs) {
ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
if (ret)
return -EINVAL;
if (of_property_read_u32(pmic_np,
"s5m8767,pmic-buck-default-dvs-idx",
&pdata->buck_default_idx)) {
pdata->buck_default_idx = 0;
} else {
if (pdata->buck_default_idx >= 8) {
pdata->buck_default_idx = 0;
dev_info(iodev->dev,
"invalid value for default dvs index, use 0\n");
}
}
dvs_voltage_nr = 8;
}
ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np);
if (ret)
return -EINVAL;
if (of_property_read_u32_array(pmic_np,
"s5m8767,pmic-buck2-dvs-voltage",
pdata->buck2_voltage, dvs_voltage_nr)) {
dev_err(iodev->dev, "buck2 voltages not specified\n");
return -EINVAL;
}
if (of_property_read_u32_array(pmic_np,
"s5m8767,pmic-buck3-dvs-voltage",
pdata->buck3_voltage, dvs_voltage_nr)) {
dev_err(iodev->dev, "buck3 voltages not specified\n");
return -EINVAL;
}
if (of_property_read_u32_array(pmic_np,
"s5m8767,pmic-buck4-dvs-voltage",
pdata->buck4_voltage, dvs_voltage_nr)) {
dev_err(iodev->dev, "buck4 voltages not specified\n");
return -EINVAL;
}
return 0;
}
#else
static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
struct sec_platform_data *pdata)
{
return 0;
}
#endif /* CONFIG_OF */
static int s5m8767_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = iodev->pdata;
struct regulator_config config = { };
struct regulator_dev **rdev;
struct s5m8767_info *s5m8767;
int i, ret, size, buck_init;
if (!pdata) {
dev_err(pdev->dev.parent, "Platform data not supplied\n");
return -ENODEV;
}
if (iodev->dev->of_node) {
ret = s5m8767_pmic_dt_parse_pdata(pdev, pdata);
if (ret)
return ret;
}
if (pdata->buck2_gpiodvs) {
if (pdata->buck3_gpiodvs || pdata->buck4_gpiodvs) {
dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
return -EINVAL;
}
}
if (pdata->buck3_gpiodvs) {
if (pdata->buck2_gpiodvs || pdata->buck4_gpiodvs) {
dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
return -EINVAL;
}
}
if (pdata->buck4_gpiodvs) {
if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs) {
dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
return -EINVAL;
}
}
s5m8767 = devm_kzalloc(&pdev->dev, sizeof(struct s5m8767_info),
GFP_KERNEL);
if (!s5m8767)
return -ENOMEM;
size = sizeof(struct regulator_dev *) * (S5M8767_REG_MAX - 2);
s5m8767->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!s5m8767->rdev)
return -ENOMEM;
rdev = s5m8767->rdev;
s5m8767->dev = &pdev->dev;
s5m8767->iodev = iodev;
s5m8767->num_regulators = pdata->num_regulators;
platform_set_drvdata(pdev, s5m8767);
s5m8767->buck_gpioindex = pdata->buck_default_idx;
s5m8767->buck2_gpiodvs = pdata->buck2_gpiodvs;
s5m8767->buck3_gpiodvs = pdata->buck3_gpiodvs;
s5m8767->buck4_gpiodvs = pdata->buck4_gpiodvs;
s5m8767->buck_gpios[0] = pdata->buck_gpios[0];
s5m8767->buck_gpios[1] = pdata->buck_gpios[1];
s5m8767->buck_gpios[2] = pdata->buck_gpios[2];
s5m8767->buck_ds[0] = pdata->buck_ds[0];
s5m8767->buck_ds[1] = pdata->buck_ds[1];
s5m8767->buck_ds[2] = pdata->buck_ds[2];
s5m8767->ramp_delay = pdata->buck_ramp_delay;
s5m8767->buck2_ramp = pdata->buck2_ramp_enable;
s5m8767->buck3_ramp = pdata->buck3_ramp_enable;
s5m8767->buck4_ramp = pdata->buck4_ramp_enable;
s5m8767->opmode = pdata->opmode;
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
pdata->buck2_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS2, buck_init);
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
pdata->buck3_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS2, buck_init);
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
pdata->buck4_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS2, buck_init);
for (i = 0; i < 8; i++) {
if (s5m8767->buck2_gpiodvs) {
s5m8767->buck2_vol[i] =
s5m8767_convert_voltage_to_sel(
&buck_voltage_val2,
pdata->buck2_voltage[i]);
}
if (s5m8767->buck3_gpiodvs) {
s5m8767->buck3_vol[i] =
s5m8767_convert_voltage_to_sel(
&buck_voltage_val2,
pdata->buck3_voltage[i]);
}
if (s5m8767->buck4_gpiodvs) {
s5m8767->buck4_vol[i] =
s5m8767_convert_voltage_to_sel(
&buck_voltage_val2,
pdata->buck4_voltage[i]);
}
}
if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
pdata->buck4_gpiodvs) {
if (!gpio_is_valid(pdata->buck_gpios[0]) ||
!gpio_is_valid(pdata->buck_gpios[1]) ||
!gpio_is_valid(pdata->buck_gpios[2])) {
dev_err(&pdev->dev, "GPIO NOT VALID\n");
return -EINVAL;
}
ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[0],
"S5M8767 SET1");
if (ret)
return ret;
ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[1],
"S5M8767 SET2");
if (ret)
return ret;
ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[2],
"S5M8767 SET3");
if (ret)
return ret;
/* SET1 GPIO */
gpio_direction_output(pdata->buck_gpios[0],
(s5m8767->buck_gpioindex >> 2) & 0x1);
/* SET2 GPIO */
gpio_direction_output(pdata->buck_gpios[1],
(s5m8767->buck_gpioindex >> 1) & 0x1);
/* SET3 GPIO */
gpio_direction_output(pdata->buck_gpios[2],
(s5m8767->buck_gpioindex >> 0) & 0x1);
}
ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[0], "S5M8767 DS2");
if (ret)
return ret;
ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[1], "S5M8767 DS3");
if (ret)
return ret;
ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[2], "S5M8767 DS4");
if (ret)
return ret;
/* DS2 GPIO */
gpio_direction_output(pdata->buck_ds[0], 0x0);
/* DS3 GPIO */
gpio_direction_output(pdata->buck_ds[1], 0x0);
/* DS4 GPIO */
gpio_direction_output(pdata->buck_ds[2], 0x0);
if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
pdata->buck4_gpiodvs) {
MFD bits for the 3.6 merge window. We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJQFpGVAAoJEIqAPN1PVmxKFNoP/1dkYngrxxV6cxdyLJ74APhG lVKPgaDxQhdgfwCZJmMeZK1UphZo80cWnEXG6sTHZUEQdTaslSJu5SuPfUM+fo7e 52/dU0nx0ZE04pwPQLHbidS4TmHlbLg9oM2kmIf9RO5rg34GodwVgRL/4+k1qvhz aWYJt9erFhQOpqaSX66mXHSuhvzHypbcE7d2B2Ykmh3NoYiH2w9H9KmIbbb+ZLq8 +Bp/i5Ys/vfooo+8IE2w6KZfIzMwsmmtWjjr/38yuQJaKZCh/zn23DM9HsdrVf++ RzfniRF4YBxmeKi7zi8MFIYys8filTCXA9dXbGSAKCuUCT37yZRnUxTeN1bn7Bux A7KRpG7pUKQKVKqCTndvK5LcQKlT33XyW2ZzV1wVWX2JkCJ+gilPeykb8IabNvGX nIp0STEGR/WdCLEAKo8pJF7Usn0RuUzAug02SG/mQ6dpnLoZqp0Od5W7gRhT7M7h hXr/xKJ6cG5YwicpAdy5kJJ0dRgQrtaHwxrF0B68AXZ7CmAtkPuEGCYhUCFnGQUH XJ0CodAqqVBRyYiQS4zIpIh2nqhIdsgv4OC1+kVLbubQk+PR88zG9Jvg6i1HQi/A OHi7N5Wite3YUrs3sBzDKnEc/Il2YRhVaz2SLVNfZR0PS7hywHN3rK/tVFINTgei jNEz1H6hu7ToNLfs0UzP =c28c -----END PGP SIGNATURE----- Merge tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
2012-07-30 19:41:17 +00:00
sec_reg_update(s5m8767->iodev, S5M8767_REG_BUCK2CTRL,
(pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1),
1 << 1);
MFD bits for the 3.6 merge window. We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJQFpGVAAoJEIqAPN1PVmxKFNoP/1dkYngrxxV6cxdyLJ74APhG lVKPgaDxQhdgfwCZJmMeZK1UphZo80cWnEXG6sTHZUEQdTaslSJu5SuPfUM+fo7e 52/dU0nx0ZE04pwPQLHbidS4TmHlbLg9oM2kmIf9RO5rg34GodwVgRL/4+k1qvhz aWYJt9erFhQOpqaSX66mXHSuhvzHypbcE7d2B2Ykmh3NoYiH2w9H9KmIbbb+ZLq8 +Bp/i5Ys/vfooo+8IE2w6KZfIzMwsmmtWjjr/38yuQJaKZCh/zn23DM9HsdrVf++ RzfniRF4YBxmeKi7zi8MFIYys8filTCXA9dXbGSAKCuUCT37yZRnUxTeN1bn7Bux A7KRpG7pUKQKVKqCTndvK5LcQKlT33XyW2ZzV1wVWX2JkCJ+gilPeykb8IabNvGX nIp0STEGR/WdCLEAKo8pJF7Usn0RuUzAug02SG/mQ6dpnLoZqp0Od5W7gRhT7M7h hXr/xKJ6cG5YwicpAdy5kJJ0dRgQrtaHwxrF0B68AXZ7CmAtkPuEGCYhUCFnGQUH XJ0CodAqqVBRyYiQS4zIpIh2nqhIdsgv4OC1+kVLbubQk+PR88zG9Jvg6i1HQi/A OHi7N5Wite3YUrs3sBzDKnEc/Il2YRhVaz2SLVNfZR0PS7hywHN3rK/tVFINTgei jNEz1H6hu7ToNLfs0UzP =c28c -----END PGP SIGNATURE----- Merge tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
2012-07-30 19:41:17 +00:00
sec_reg_update(s5m8767->iodev, S5M8767_REG_BUCK3CTRL,
(pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1),
1 << 1);
MFD bits for the 3.6 merge window. We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJQFpGVAAoJEIqAPN1PVmxKFNoP/1dkYngrxxV6cxdyLJ74APhG lVKPgaDxQhdgfwCZJmMeZK1UphZo80cWnEXG6sTHZUEQdTaslSJu5SuPfUM+fo7e 52/dU0nx0ZE04pwPQLHbidS4TmHlbLg9oM2kmIf9RO5rg34GodwVgRL/4+k1qvhz aWYJt9erFhQOpqaSX66mXHSuhvzHypbcE7d2B2Ykmh3NoYiH2w9H9KmIbbb+ZLq8 +Bp/i5Ys/vfooo+8IE2w6KZfIzMwsmmtWjjr/38yuQJaKZCh/zn23DM9HsdrVf++ RzfniRF4YBxmeKi7zi8MFIYys8filTCXA9dXbGSAKCuUCT37yZRnUxTeN1bn7Bux A7KRpG7pUKQKVKqCTndvK5LcQKlT33XyW2ZzV1wVWX2JkCJ+gilPeykb8IabNvGX nIp0STEGR/WdCLEAKo8pJF7Usn0RuUzAug02SG/mQ6dpnLoZqp0Od5W7gRhT7M7h hXr/xKJ6cG5YwicpAdy5kJJ0dRgQrtaHwxrF0B68AXZ7CmAtkPuEGCYhUCFnGQUH XJ0CodAqqVBRyYiQS4zIpIh2nqhIdsgv4OC1+kVLbubQk+PR88zG9Jvg6i1HQi/A OHi7N5Wite3YUrs3sBzDKnEc/Il2YRhVaz2SLVNfZR0PS7hywHN3rK/tVFINTgei jNEz1H6hu7ToNLfs0UzP =c28c -----END PGP SIGNATURE----- Merge tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
2012-07-30 19:41:17 +00:00
sec_reg_update(s5m8767->iodev, S5M8767_REG_BUCK4CTRL,
(pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1),
1 << 1);
}
/* Initialize GPIO DVS registers */
for (i = 0; i < 8; i++) {
if (s5m8767->buck2_gpiodvs) {
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS1 + i,
s5m8767->buck2_vol[i]);
}
if (s5m8767->buck3_gpiodvs) {
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS1 + i,
s5m8767->buck3_vol[i]);
}
if (s5m8767->buck4_gpiodvs) {
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS1 + i,
s5m8767->buck4_vol[i]);
}
}
if (s5m8767->buck2_ramp)
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP, 0x08, 0x08);
if (s5m8767->buck3_ramp)
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP, 0x04, 0x04);
if (s5m8767->buck4_ramp)
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP, 0x02, 0x02);
if (s5m8767->buck2_ramp || s5m8767->buck3_ramp
|| s5m8767->buck4_ramp) {
switch (s5m8767->ramp_delay) {
case 5:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0x40, 0xf0);
break;
case 10:
MFD bits for the 3.6 merge window. We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJQFpGVAAoJEIqAPN1PVmxKFNoP/1dkYngrxxV6cxdyLJ74APhG lVKPgaDxQhdgfwCZJmMeZK1UphZo80cWnEXG6sTHZUEQdTaslSJu5SuPfUM+fo7e 52/dU0nx0ZE04pwPQLHbidS4TmHlbLg9oM2kmIf9RO5rg34GodwVgRL/4+k1qvhz aWYJt9erFhQOpqaSX66mXHSuhvzHypbcE7d2B2Ykmh3NoYiH2w9H9KmIbbb+ZLq8 +Bp/i5Ys/vfooo+8IE2w6KZfIzMwsmmtWjjr/38yuQJaKZCh/zn23DM9HsdrVf++ RzfniRF4YBxmeKi7zi8MFIYys8filTCXA9dXbGSAKCuUCT37yZRnUxTeN1bn7Bux A7KRpG7pUKQKVKqCTndvK5LcQKlT33XyW2ZzV1wVWX2JkCJ+gilPeykb8IabNvGX nIp0STEGR/WdCLEAKo8pJF7Usn0RuUzAug02SG/mQ6dpnLoZqp0Od5W7gRhT7M7h hXr/xKJ6cG5YwicpAdy5kJJ0dRgQrtaHwxrF0B68AXZ7CmAtkPuEGCYhUCFnGQUH XJ0CodAqqVBRyYiQS4zIpIh2nqhIdsgv4OC1+kVLbubQk+PR88zG9Jvg6i1HQi/A OHi7N5Wite3YUrs3sBzDKnEc/Il2YRhVaz2SLVNfZR0PS7hywHN3rK/tVFINTgei jNEz1H6hu7ToNLfs0UzP =c28c -----END PGP SIGNATURE----- Merge tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
2012-07-30 19:41:17 +00:00
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0x90, 0xf0);
break;
case 25:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0xd0, 0xf0);
break;
case 50:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0xe0, 0xf0);
break;
case 100:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0xf0, 0xf0);
break;
default:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0x90, 0xf0);
}
}
for (i = 0; i < pdata->num_regulators; i++) {
const struct sec_voltage_desc *desc;
int id = pdata->regulators[i].id;
desc = reg_voltage_map[id];
if (desc) {
regulators[id].n_voltages =
(desc->max - desc->min) / desc->step + 1;
regulators[id].min_uV = desc->min;
regulators[id].uV_step = desc->step;
regulators[id].vsel_reg =
s5m8767_get_vsel_reg(id, s5m8767);
if (id < S5M8767_BUCK1)
regulators[id].vsel_mask = 0x3f;
else
regulators[id].vsel_mask = 0xff;
}
config.dev = s5m8767->dev;
config.init_data = pdata->regulators[i].initdata;
config.driver_data = s5m8767;
config.regmap = iodev->regmap;
config.of_node = pdata->regulators[i].reg_node;
rdev[i] = regulator_register(&regulators[id], &config);
if (IS_ERR(rdev[i])) {
ret = PTR_ERR(rdev[i]);
dev_err(s5m8767->dev, "regulator init failed for %d\n",
id);
rdev[i] = NULL;
goto err;
}
}
return 0;
err:
for (i = 0; i < s5m8767->num_regulators; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
return ret;
}
static int s5m8767_pmic_remove(struct platform_device *pdev)
{
struct s5m8767_info *s5m8767 = platform_get_drvdata(pdev);
struct regulator_dev **rdev = s5m8767->rdev;
int i;
for (i = 0; i < s5m8767->num_regulators; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
return 0;
}
static const struct platform_device_id s5m8767_pmic_id[] = {
{ "s5m8767-pmic", 0},
{ },
};
MODULE_DEVICE_TABLE(platform, s5m8767_pmic_id);
static struct platform_driver s5m8767_pmic_driver = {
.driver = {
.name = "s5m8767-pmic",
.owner = THIS_MODULE,
},
.probe = s5m8767_pmic_probe,
.remove = s5m8767_pmic_remove,
.id_table = s5m8767_pmic_id,
};
static int __init s5m8767_pmic_init(void)
{
return platform_driver_register(&s5m8767_pmic_driver);
}
subsys_initcall(s5m8767_pmic_init);
static void __exit s5m8767_pmic_exit(void)
{
platform_driver_unregister(&s5m8767_pmic_driver);
}
module_exit(s5m8767_pmic_exit);
/* Module information */
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
MODULE_DESCRIPTION("SAMSUNG S5M8767 Regulator Driver");
MODULE_LICENSE("GPL");