leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
128307d5f9
linux/sound/soc/codecs/nau8825.c

2670 lines
87 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 Based on 1 normalized pattern(s): licensed under the gpl 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-28 16:57:06 +00:00
// SPDX-License-Identifier: GPL-2.0-only
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
/*
* Nuvoton NAU8825 audio codec driver
*
* Copyright 2015 Google Chromium project.
* Author: Anatol Pomozov <anatol@chromium.org>
* Copyright 2015 Nuvoton Technology Corp.
* Co-author: Meng-Huang Kuo <mhkuo@nuvoton.com>
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/clk.h>
ASoC: nau8825: add acpi match ID This patch adds the acpi match ID for nau8825 codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-07 21:33:57 +00:00
#include <linux/acpi.h>
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
#include <linux/math64.h>
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
#include <linux/semaphore.h>
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/jack.h>
#include "nau8825.h"
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
#define NUVOTON_CODEC_DAI "nau8825-hifi"
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
#define NAU_FREF_MAX 13500000
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
#define NAU_FVCO_MAX 124000000
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
#define NAU_FVCO_MIN 90000000
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* cross talk suppression detection */
#define LOG10_MAGIC 646456993
#define GAIN_AUGMENT 22500
#define SIDETONE_BASE 207000
ASoC: nau8825: AD/DA over sampling rate configuration Over Sampling Rate (OSR) is defined as CLK_ADC frequency divided by the audio sample rate (Fs). OSR = CLK_ADC / FS The available OSRs are 32, 64, 128 or 256. Note that the OSR and Fs values must be selected such that the maximum frequency of CLK_ADC is less than 6.144 MHz. It is recommended to match the relationship between OSR and clock SRC according to following Table. ADC_RATE: 00(OSR=32) | CLK_ADC_SRC: 11(CODEC 1/8) ADC_RATE: 01(OSR=64) | CLK_ADC_SRC: 10(CODEC1/4) ADC_RATE: 10(OSR=128) | CLK_ADC_SRC: 01(CODEC 1/2) ADC_RATE: 11(OSR=256) | CLK_ADC_SRC: 00(CODEC CLK) The over sampling rate about DAC follows the same rule with ADCs. The driver changes the OSR to 64 value when initiation for better FLL performance and applies the dynamic SRC change by different OSR. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 03:34:42 +00:00
/* the maximum frequency of CLK_ADC and CLK_DAC */
#define CLK_DA_AD_MAX 6144000
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
static int nau8825_configure_sysclk(struct nau8825 *nau8825,
int clk_id, unsigned int freq);
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
struct nau8825_fll {
int mclk_src;
int ratio;
int fll_frac;
int fll_int;
int clk_ref_div;
};
struct nau8825_fll_attr {
unsigned int param;
unsigned int val;
};
/* scaling for mclk from sysclk_src output */
static const struct nau8825_fll_attr mclk_src_scaling[] = {
{ 1, 0x0 },
{ 2, 0x2 },
{ 4, 0x3 },
{ 8, 0x4 },
{ 16, 0x5 },
{ 32, 0x6 },
{ 3, 0x7 },
{ 6, 0xa },
{ 12, 0xb },
{ 24, 0xc },
{ 48, 0xd },
{ 96, 0xe },
{ 5, 0xf },
};
/* ratio for input clk freq */
static const struct nau8825_fll_attr fll_ratio[] = {
{ 512000, 0x01 },
{ 256000, 0x02 },
{ 128000, 0x04 },
{ 64000, 0x08 },
{ 32000, 0x10 },
{ 8000, 0x20 },
{ 4000, 0x40 },
};
static const struct nau8825_fll_attr fll_pre_scalar[] = {
{ 1, 0x0 },
{ 2, 0x1 },
{ 4, 0x2 },
{ 8, 0x3 },
};
ASoC: nau8825: AD/DA over sampling rate configuration Over Sampling Rate (OSR) is defined as CLK_ADC frequency divided by the audio sample rate (Fs). OSR = CLK_ADC / FS The available OSRs are 32, 64, 128 or 256. Note that the OSR and Fs values must be selected such that the maximum frequency of CLK_ADC is less than 6.144 MHz. It is recommended to match the relationship between OSR and clock SRC according to following Table. ADC_RATE: 00(OSR=32) | CLK_ADC_SRC: 11(CODEC 1/8) ADC_RATE: 01(OSR=64) | CLK_ADC_SRC: 10(CODEC1/4) ADC_RATE: 10(OSR=128) | CLK_ADC_SRC: 01(CODEC 1/2) ADC_RATE: 11(OSR=256) | CLK_ADC_SRC: 00(CODEC CLK) The over sampling rate about DAC follows the same rule with ADCs. The driver changes the OSR to 64 value when initiation for better FLL performance and applies the dynamic SRC change by different OSR. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 03:34:42 +00:00
/* over sampling rate */
struct nau8825_osr_attr {
unsigned int osr;
unsigned int clk_src;
};
static const struct nau8825_osr_attr osr_dac_sel[] = {
{ 64, 2 }, /* OSR 64, SRC 1/4 */
{ 256, 0 }, /* OSR 256, SRC 1 */
{ 128, 1 }, /* OSR 128, SRC 1/2 */
{ 0, 0 },
{ 32, 3 }, /* OSR 32, SRC 1/8 */
};
static const struct nau8825_osr_attr osr_adc_sel[] = {
{ 32, 3 }, /* OSR 32, SRC 1/8 */
{ 64, 2 }, /* OSR 64, SRC 1/4 */
{ 128, 1 }, /* OSR 128, SRC 1/2 */
{ 256, 0 }, /* OSR 256, SRC 1 */
};
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
static const struct reg_default nau8825_reg_defaults[] = {
{ NAU8825_REG_ENA_CTRL, 0x00ff },
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
{ NAU8825_REG_IIC_ADDR_SET, 0x0 },
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
{ NAU8825_REG_CLK_DIVIDER, 0x0050 },
{ NAU8825_REG_FLL1, 0x0 },
{ NAU8825_REG_FLL2, 0x3126 },
{ NAU8825_REG_FLL3, 0x0008 },
{ NAU8825_REG_FLL4, 0x0010 },
{ NAU8825_REG_FLL5, 0x0 },
{ NAU8825_REG_FLL6, 0x6000 },
{ NAU8825_REG_FLL_VCO_RSV, 0xf13c },
{ NAU8825_REG_HSD_CTRL, 0x000c },
{ NAU8825_REG_JACK_DET_CTRL, 0x0 },
{ NAU8825_REG_INTERRUPT_MASK, 0x0 },
{ NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff },
{ NAU8825_REG_SAR_CTRL, 0x0015 },
{ NAU8825_REG_KEYDET_CTRL, 0x0110 },
{ NAU8825_REG_VDET_THRESHOLD_1, 0x0 },
{ NAU8825_REG_VDET_THRESHOLD_2, 0x0 },
{ NAU8825_REG_VDET_THRESHOLD_3, 0x0 },
{ NAU8825_REG_VDET_THRESHOLD_4, 0x0 },
{ NAU8825_REG_GPIO34_CTRL, 0x0 },
{ NAU8825_REG_GPIO12_CTRL, 0x0 },
{ NAU8825_REG_TDM_CTRL, 0x0 },
{ NAU8825_REG_I2S_PCM_CTRL1, 0x000b },
{ NAU8825_REG_I2S_PCM_CTRL2, 0x8010 },
{ NAU8825_REG_LEFT_TIME_SLOT, 0x0 },
{ NAU8825_REG_RIGHT_TIME_SLOT, 0x0 },
{ NAU8825_REG_BIQ_CTRL, 0x0 },
{ NAU8825_REG_BIQ_COF1, 0x0 },
{ NAU8825_REG_BIQ_COF2, 0x0 },
{ NAU8825_REG_BIQ_COF3, 0x0 },
{ NAU8825_REG_BIQ_COF4, 0x0 },
{ NAU8825_REG_BIQ_COF5, 0x0 },
{ NAU8825_REG_BIQ_COF6, 0x0 },
{ NAU8825_REG_BIQ_COF7, 0x0 },
{ NAU8825_REG_BIQ_COF8, 0x0 },
{ NAU8825_REG_BIQ_COF9, 0x0 },
{ NAU8825_REG_BIQ_COF10, 0x0 },
{ NAU8825_REG_ADC_RATE, 0x0010 },
{ NAU8825_REG_DAC_CTRL1, 0x0001 },
{ NAU8825_REG_DAC_CTRL2, 0x0 },
{ NAU8825_REG_DAC_DGAIN_CTRL, 0x0 },
{ NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf },
{ NAU8825_REG_MUTE_CTRL, 0x0 },
{ NAU8825_REG_HSVOL_CTRL, 0x0 },
{ NAU8825_REG_DACL_CTRL, 0x02cf },
{ NAU8825_REG_DACR_CTRL, 0x00cf },
{ NAU8825_REG_ADC_DRC_KNEE_IP12, 0x1486 },
{ NAU8825_REG_ADC_DRC_KNEE_IP34, 0x0f12 },
{ NAU8825_REG_ADC_DRC_SLOPES, 0x25ff },
{ NAU8825_REG_ADC_DRC_ATKDCY, 0x3457 },
{ NAU8825_REG_DAC_DRC_KNEE_IP12, 0x1486 },
{ NAU8825_REG_DAC_DRC_KNEE_IP34, 0x0f12 },
{ NAU8825_REG_DAC_DRC_SLOPES, 0x25f9 },
{ NAU8825_REG_DAC_DRC_ATKDCY, 0x3457 },
{ NAU8825_REG_IMM_MODE_CTRL, 0x0 },
{ NAU8825_REG_CLASSG_CTRL, 0x0 },
{ NAU8825_REG_OPT_EFUSE_CTRL, 0x0 },
{ NAU8825_REG_MISC_CTRL, 0x0 },
{ NAU8825_REG_BIAS_ADJ, 0x0 },
{ NAU8825_REG_TRIM_SETTINGS, 0x0 },
{ NAU8825_REG_ANALOG_CONTROL_1, 0x0 },
{ NAU8825_REG_ANALOG_CONTROL_2, 0x0 },
{ NAU8825_REG_ANALOG_ADC_1, 0x0011 },
{ NAU8825_REG_ANALOG_ADC_2, 0x0020 },
{ NAU8825_REG_RDAC, 0x0008 },
{ NAU8825_REG_MIC_BIAS, 0x0006 },
{ NAU8825_REG_BOOST, 0x0 },
{ NAU8825_REG_FEPGA, 0x0 },
{ NAU8825_REG_POWER_UP_CONTROL, 0x0 },
{ NAU8825_REG_CHARGE_PUMP, 0x0 },
};
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* register backup table when cross talk detection */
static struct reg_default nau8825_xtalk_baktab[] = {
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
{ NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf },
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
{ NAU8825_REG_HSVOL_CTRL, 0 },
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
{ NAU8825_REG_DACL_CTRL, 0x00cf },
{ NAU8825_REG_DACR_CTRL, 0x02cf },
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
};
static const unsigned short logtable[256] = {
0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7,
0x0b5d, 0x0cc3, 0x0e27, 0x0f8a, 0x10eb, 0x124b, 0x13aa, 0x1508,
0x1664, 0x17bf, 0x1919, 0x1a71, 0x1bc8, 0x1d1e, 0x1e73, 0x1fc6,
0x2119, 0x226a, 0x23ba, 0x2508, 0x2656, 0x27a2, 0x28ed, 0x2a37,
0x2b80, 0x2cc8, 0x2e0f, 0x2f54, 0x3098, 0x31dc, 0x331e, 0x345f,
0x359f, 0x36de, 0x381b, 0x3958, 0x3a94, 0x3bce, 0x3d08, 0x3e41,
0x3f78, 0x40af, 0x41e4, 0x4319, 0x444c, 0x457f, 0x46b0, 0x47e1,
0x4910, 0x4a3f, 0x4b6c, 0x4c99, 0x4dc5, 0x4eef, 0x5019, 0x5142,
0x526a, 0x5391, 0x54b7, 0x55dc, 0x5700, 0x5824, 0x5946, 0x5a68,
0x5b89, 0x5ca8, 0x5dc7, 0x5ee5, 0x6003, 0x611f, 0x623a, 0x6355,
0x646f, 0x6588, 0x66a0, 0x67b7, 0x68ce, 0x69e4, 0x6af8, 0x6c0c,
0x6d20, 0x6e32, 0x6f44, 0x7055, 0x7165, 0x7274, 0x7383, 0x7490,
0x759d, 0x76aa, 0x77b5, 0x78c0, 0x79ca, 0x7ad3, 0x7bdb, 0x7ce3,
0x7dea, 0x7ef0, 0x7ff6, 0x80fb, 0x81ff, 0x8302, 0x8405, 0x8507,
0x8608, 0x8709, 0x8809, 0x8908, 0x8a06, 0x8b04, 0x8c01, 0x8cfe,
0x8dfa, 0x8ef5, 0x8fef, 0x90e9, 0x91e2, 0x92db, 0x93d2, 0x94ca,
0x95c0, 0x96b6, 0x97ab, 0x98a0, 0x9994, 0x9a87, 0x9b7a, 0x9c6c,
0x9d5e, 0x9e4f, 0x9f3f, 0xa02e, 0xa11e, 0xa20c, 0xa2fa, 0xa3e7,
0xa4d4, 0xa5c0, 0xa6ab, 0xa796, 0xa881, 0xa96a, 0xaa53, 0xab3c,
0xac24, 0xad0c, 0xadf2, 0xaed9, 0xafbe, 0xb0a4, 0xb188, 0xb26c,
0xb350, 0xb433, 0xb515, 0xb5f7, 0xb6d9, 0xb7ba, 0xb89a, 0xb97a,
0xba59, 0xbb38, 0xbc16, 0xbcf4, 0xbdd1, 0xbead, 0xbf8a, 0xc065,
0xc140, 0xc21b, 0xc2f5, 0xc3cf, 0xc4a8, 0xc580, 0xc658, 0xc730,
0xc807, 0xc8de, 0xc9b4, 0xca8a, 0xcb5f, 0xcc34, 0xcd08, 0xcddc,
0xceaf, 0xcf82, 0xd054, 0xd126, 0xd1f7, 0xd2c8, 0xd399, 0xd469,
0xd538, 0xd607, 0xd6d6, 0xd7a4, 0xd872, 0xd93f, 0xda0c, 0xdad9,
0xdba5, 0xdc70, 0xdd3b, 0xde06, 0xded0, 0xdf9a, 0xe063, 0xe12c,
0xe1f5, 0xe2bd, 0xe385, 0xe44c, 0xe513, 0xe5d9, 0xe69f, 0xe765,
0xe82a, 0xe8ef, 0xe9b3, 0xea77, 0xeb3b, 0xebfe, 0xecc1, 0xed83,
0xee45, 0xef06, 0xefc8, 0xf088, 0xf149, 0xf209, 0xf2c8, 0xf387,
0xf446, 0xf505, 0xf5c3, 0xf680, 0xf73e, 0xf7fb, 0xf8b7, 0xf973,
0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47
};
/**
* nau8825_sema_acquire - acquire the semaphore of nau88l25
* @nau8825: component to register the codec private data with
* @timeout: how long in jiffies to wait before failure or zero to wait
* until release
*
* Attempts to acquire the semaphore with number of jiffies. If no more
* tasks are allowed to acquire the semaphore, calling this function will
* put the task to sleep. If the semaphore is not released within the
* specified number of jiffies, this function returns.
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
* If the semaphore is not released within the specified number of jiffies,
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
* this function returns -ETIME. If the sleep is interrupted by a signal,
* this function will return -EINTR. It returns 0 if the semaphore was
* acquired successfully.
*
* Acquires the semaphore without jiffies. Try to acquire the semaphore
* atomically. Returns 0 if the semaphore has been acquired successfully
* or 1 if it it cannot be acquired.
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
*/
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout)
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
{
int ret;
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
if (timeout) {
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
ret = down_timeout(&nau8825->xtalk_sem, timeout);
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
if (ret < 0)
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
dev_warn(nau8825->dev, "Acquire semaphore timeout\n");
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
} else {
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
ret = down_trylock(&nau8825->xtalk_sem);
if (ret)
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
dev_warn(nau8825->dev, "Acquire semaphore fail\n");
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
}
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
return ret;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
}
/**
* nau8825_sema_release - release the semaphore of nau88l25
* @nau8825: component to register the codec private data with
*
* Release the semaphore which may be called from any context and
* even by tasks which have never called down().
*/
static inline void nau8825_sema_release(struct nau8825 *nau8825)
{
up(&nau8825->xtalk_sem);
}
/**
* nau8825_sema_reset - reset the semaphore for nau88l25
* @nau8825: component to register the codec private data with
*
* Reset the counter of the semaphore. Call this function to restart
* a new round task management.
*/
static inline void nau8825_sema_reset(struct nau8825 *nau8825)
{
nau8825->xtalk_sem.count = 1;
}
/**
* Ramp up the headphone volume change gradually to target level.
*
* @nau8825: component to register the codec private data with
* @vol_from: the volume to start up
* @vol_to: the target volume
* @step: the volume span to move on
*
* The headphone volume is from 0dB to minimum -54dB and -1dB per step.
* If the volume changes sharp, there is a pop noise heard in headphone. We
* provide the function to ramp up the volume up or down by delaying 10ms
* per step.
*/
static void nau8825_hpvol_ramp(struct nau8825 *nau8825,
unsigned int vol_from, unsigned int vol_to, unsigned int step)
{
unsigned int value, volume, ramp_up, from, to;
if (vol_from == vol_to || step == 0) {
return;
} else if (vol_from < vol_to) {
ramp_up = true;
from = vol_from;
to = vol_to;
} else {
ramp_up = false;
from = vol_to;
to = vol_from;
}
/* only handle volume from 0dB to minimum -54dB */
if (to > NAU8825_HP_VOL_MIN)
to = NAU8825_HP_VOL_MIN;
for (volume = from; volume < to; volume += step) {
if (ramp_up)
value = volume;
else
value = to - volume + from;
regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL,
NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK,
(value << NAU8825_HPL_VOL_SFT) | value);
usleep_range(10000, 10500);
}
if (ramp_up)
value = to;
else
value = from;
regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL,
NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK,
(value << NAU8825_HPL_VOL_SFT) | value);
}
/**
* Computes log10 of a value; the result is round off to 3 decimal. This func-
* tion takes reference to dvb-math. The source code locates as the following.
* Linux/drivers/media/dvb-core/dvb_math.c
ASoC: codecs: fix kernel doc descriptions Missing or spurious parameter descriptions. Fix warnings with W=1 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-05 02:02:32 +00:00
* @value: input for log10
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
*
* return log10(value) * 1000
*/
static u32 nau8825_intlog10_dec3(u32 value)
{
u32 msb, logentry, significand, interpolation, log10val;
u64 log2val;
/* first detect the msb (count begins at 0) */
msb = fls(value) - 1;
/**
* now we use a logtable after the following method:
*
* log2(2^x * y) * 2^24 = x * 2^24 + log2(y) * 2^24
* where x = msb and therefore 1 <= y < 2
* first y is determined by shifting the value left
* so that msb is bit 31
* 0x00231f56 -> 0x8C7D5800
* the result is y * 2^31 -> "significand"
* then the highest 9 bits are used for a table lookup
* the highest bit is discarded because it's always set
* the highest nine bits in our example are 100011000
* so we would use the entry 0x18
*/
significand = value << (31 - msb);
logentry = (significand >> 23) & 0xff;
/**
* last step we do is interpolation because of the
* limitations of the log table the error is that part of
* the significand which isn't used for lookup then we
* compute the ratio between the error and the next table entry
* and interpolate it between the log table entry used and the
* next one the biggest error possible is 0x7fffff
* (in our example it's 0x7D5800)
* needed value for next table entry is 0x800000
* so the interpolation is
* (error / 0x800000) * (logtable_next - logtable_current)
* in the implementation the division is moved to the end for
* better accuracy there is also an overflow correction if
* logtable_next is 256
*/
interpolation = ((significand & 0x7fffff) *
((logtable[(logentry + 1) & 0xff] -
logtable[logentry]) & 0xffff)) >> 15;
log2val = ((msb << 24) + (logtable[logentry] << 8) + interpolation);
/**
* log10(x) = log2(x) * log10(2)
*/
log10val = (log2val * LOG10_MAGIC) >> 31;
/**
* the result is round off to 3 decimal
*/
return log10val / ((1 << 24) / 1000);
}
/**
* computes cross talk suppression sidetone gain.
*
* @sig_org: orignal signal level
* @sig_cros: cross talk signal level
*
* The orignal and cross talk signal vlues need to be characterized.
* Once these values have been characterized, this sidetone value
* can be converted to decibel with the equation below.
* sidetone = 20 * log (original signal level / crosstalk signal level)
*
* return cross talk sidetone gain
*/
static u32 nau8825_xtalk_sidetone(u32 sig_org, u32 sig_cros)
{
u32 gain, sidetone;
ASoC: nau8825: remove unnecessary unlikely() WARN_ON() already contains an unlikely(), so it's not necessary to use unlikely. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-04 12:55:29 +00:00
if (WARN_ON(sig_org == 0 || sig_cros == 0))
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
return 0;
sig_org = nau8825_intlog10_dec3(sig_org);
sig_cros = nau8825_intlog10_dec3(sig_cros);
if (sig_org >= sig_cros)
gain = (sig_org - sig_cros) * 20 + GAIN_AUGMENT;
else
gain = (sig_cros - sig_org) * 20 + GAIN_AUGMENT;
sidetone = SIDETONE_BASE - gain * 2;
sidetone /= 1000;
return sidetone;
}
static int nau8825_xtalk_baktab_index_by_reg(unsigned int reg)
{
int index;
for (index = 0; index < ARRAY_SIZE(nau8825_xtalk_baktab); index++)
if (nau8825_xtalk_baktab[index].reg == reg)
return index;
return -EINVAL;
}
static void nau8825_xtalk_backup(struct nau8825 *nau8825)
{
int i;
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
if (nau8825->xtalk_baktab_initialized)
return;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* Backup some register values to backup table */
for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++)
regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg,
&nau8825_xtalk_baktab[i].def);
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
nau8825->xtalk_baktab_initialized = true;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
}
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
static void nau8825_xtalk_restore(struct nau8825 *nau8825, bool cause_cancel)
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
{
int i, volume;
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
if (!nau8825->xtalk_baktab_initialized)
return;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* Restore register values from backup table; When the driver restores
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
* the headphone volume in XTALK_DONE state, it needs recover to
* original level gradually with 3dB per step for less pop noise.
* Otherwise, the restore should do ASAP.
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
*/
for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) {
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
if (!cause_cancel && nau8825_xtalk_baktab[i].reg ==
NAU8825_REG_HSVOL_CTRL) {
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* Ramping up the volume change to reduce pop noise */
volume = nau8825_xtalk_baktab[i].def &
NAU8825_HPR_VOL_MASK;
nau8825_hpvol_ramp(nau8825, 0, volume, 3);
continue;
}
regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg,
nau8825_xtalk_baktab[i].def);
}
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
nau8825->xtalk_baktab_initialized = false;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
}
static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825)
{
/* Enable power of DAC path */
regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL |
NAU8825_ENABLE_ADC | NAU8825_ENABLE_ADC_CLK |
NAU8825_ENABLE_DAC_CLK, NAU8825_ENABLE_DACR |
NAU8825_ENABLE_DACL | NAU8825_ENABLE_ADC |
NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK);
/* Prevent startup click by letting charge pump to ramp up and
* change bump enable
*/
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN,
NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN);
/* Enable clock sync of DAC and DAC clock */
regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC,
NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN |
NAU8825_RDAC_FS_BCLK_ENB,
NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN);
/* Power up output driver with 2 stage */
regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L |
NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L,
NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L |
NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L);
regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L,
NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L);
/* HP outputs not shouted to ground */
regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL,
NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, 0);
/* Enable HP boost driver */
regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
NAU8825_HP_BOOST_DIS, NAU8825_HP_BOOST_DIS);
/* Enable class G compare path to supply 1.8V or 0.9V. */
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLASSG_CTRL,
NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN,
NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN);
}
static void nau8825_xtalk_prepare_adc(struct nau8825 *nau8825)
{
/* Power up left ADC and raise 5dB than Vmid for Vref */
regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2,
NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK,
NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_VMID_PLUS_0_5DB);
}
static void nau8825_xtalk_clock(struct nau8825 *nau8825)
{
/* Recover FLL default value */
regmap_write(nau8825->regmap, NAU8825_REG_FLL1, 0x0);
regmap_write(nau8825->regmap, NAU8825_REG_FLL2, 0x3126);
regmap_write(nau8825->regmap, NAU8825_REG_FLL3, 0x0008);
regmap_write(nau8825->regmap, NAU8825_REG_FLL4, 0x0010);
regmap_write(nau8825->regmap, NAU8825_REG_FLL5, 0x0);
regmap_write(nau8825->regmap, NAU8825_REG_FLL6, 0x6000);
/* Enable internal VCO clock for detection signal generated */
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN,
NAU8825_DCO_EN);
/* Given specific clock frequency of internal clock to
* generate signal.
*/
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_MCLK_SRC_MASK, 0xf);
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1,
NAU8825_FLL_RATIO_MASK, 0x10);
}
static void nau8825_xtalk_prepare(struct nau8825 *nau8825)
{
int volume, index;
/* Backup those registers changed by cross talk detection */
nau8825_xtalk_backup(nau8825);
/* Config IIS as master to output signal by codec */
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
ASoC: nau8825: correct the function name of register Change to correct name of the register function. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-20 08:47:06 +00:00
NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK |
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_MASTER |
ASoC: nau8825: correct the function name of register Change to correct name of the register function. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-20 08:47:06 +00:00
(0x2 << NAU8825_I2S_LRC_DIV_SFT) | 0x1);
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* Ramp up headphone volume to 0dB to get better performance and
* avoid pop noise in headphone.
*/
index = nau8825_xtalk_baktab_index_by_reg(NAU8825_REG_HSVOL_CTRL);
if (index != -EINVAL) {
volume = nau8825_xtalk_baktab[index].def &
NAU8825_HPR_VOL_MASK;
nau8825_hpvol_ramp(nau8825, volume, 0, 3);
}
nau8825_xtalk_clock(nau8825);
nau8825_xtalk_prepare_dac(nau8825);
nau8825_xtalk_prepare_adc(nau8825);
/* Config channel path and digital gain */
regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL,
NAU8825_DACL_CH_SEL_MASK | NAU8825_DACL_CH_VOL_MASK,
NAU8825_DACL_CH_SEL_L | 0xab);
regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL,
NAU8825_DACR_CH_SEL_MASK | NAU8825_DACR_CH_VOL_MASK,
NAU8825_DACR_CH_SEL_R | 0xab);
/* Config cross talk parameters and generate the 23Hz sine wave with
* 1/16 full scale of signal level for impedance measurement.
*/
regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL,
NAU8825_IMM_THD_MASK | NAU8825_IMM_GEN_VOL_MASK |
NAU8825_IMM_CYC_MASK | NAU8825_IMM_DAC_SRC_MASK,
(0x9 << NAU8825_IMM_THD_SFT) | NAU8825_IMM_GEN_VOL_1_16th |
NAU8825_IMM_CYC_8192 | NAU8825_IMM_DAC_SRC_SIN);
/* RMS intrruption enable */
regmap_update_bits(nau8825->regmap,
NAU8825_REG_INTERRUPT_MASK, NAU8825_IRQ_RMS_EN, 0);
/* Power up left and right DAC */
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0);
}
static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825)
{
/* Disable HP boost driver */
regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
NAU8825_HP_BOOST_DIS, 0);
/* HP outputs shouted to ground */
regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL,
NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L,
NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
/* Power down left and right DAC */
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
/* Enable the TESTDAC and disable L/R HP impedance */
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP |
NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
/* Power down output driver with 2 stage */
regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, 0);
regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L |
NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, 0);
/* Disable clock sync of DAC and DAC clock */
regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC,
NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN, 0);
/* Disable charge pump ramp up function and change bump */
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, 0);
/* Disable power of DAC path */
regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL |
NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK, 0);
if (!nau8825->irq)
regmap_update_bits(nau8825->regmap,
NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0);
}
static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825)
{
/* Power down left ADC and restore voltage to Vmid */
regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2,
NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0);
}
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
static void nau8825_xtalk_clean(struct nau8825 *nau8825, bool cause_cancel)
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
{
/* Enable internal VCO needed for interruptions */
nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0);
nau8825_xtalk_clean_dac(nau8825);
nau8825_xtalk_clean_adc(nau8825);
/* Clear cross talk parameters and disable */
regmap_write(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, 0);
/* RMS intrruption disable */
regmap_update_bits(nau8825->regmap, NAU8825_REG_INTERRUPT_MASK,
NAU8825_IRQ_RMS_EN, NAU8825_IRQ_RMS_EN);
/* Recover default value for IIS */
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
ASoC: nau8825: correct the function name of register Change to correct name of the register function. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-20 08:47:06 +00:00
NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK |
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_SLAVE);
/* Restore value of specific register for cross talk */
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
nau8825_xtalk_restore(nau8825, cause_cancel);
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
}
static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol)
{
/* Apply ADC volume for better cross talk performance */
regmap_update_bits(nau8825->regmap, NAU8825_REG_ADC_DGAIN_CTRL,
NAU8825_ADC_DIG_VOL_MASK, vol);
/* Disables JKTIP(HPL) DAC channel for right to left measurement.
* Do it before sending signal in order to erase pop noise.
*/
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_TESTDACR_EN | NAU8825_BIAS_TESTDACL_EN,
NAU8825_BIAS_TESTDACL_EN);
switch (nau8825->xtalk_state) {
case NAU8825_XTALK_HPR_R2L:
/* Enable right headphone impedance */
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP,
NAU8825_BIAS_HPR_IMP);
break;
case NAU8825_XTALK_HPL_R2L:
/* Enable left headphone impedance */
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP,
NAU8825_BIAS_HPL_IMP);
break;
default:
break;
}
msleep(100);
/* Impedance measurement mode enable */
regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL,
NAU8825_IMM_EN, NAU8825_IMM_EN);
}
static void nau8825_xtalk_imm_stop(struct nau8825 *nau8825)
{
/* Impedance measurement mode disable */
regmap_update_bits(nau8825->regmap,
NAU8825_REG_IMM_MODE_CTRL, NAU8825_IMM_EN, 0);
}
/* The cross talk measurement function can reduce cross talk across the
* JKTIP(HPL) and JKR1(HPR) outputs which measures the cross talk signal
* level to determine what cross talk reduction gain is. This system works by
* sending a 23Hz -24dBV sine wave into the headset output DAC and through
* the PGA. The output of the PGA is then connected to an internal current
* sense which measures the attenuated 23Hz signal and passing the output to
* an ADC which converts the measurement to a binary code. With two separated
* measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data
* can be separated read in IMM_RMS_L for HSR and HSL after each measurement.
* Thus, the measurement function has four states to complete whole sequence.
* 1. Prepare state : Prepare the resource for detection and transfer to HPR
* IMM stat to make JKR1(HPR) impedance measure.
* 2. HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer
* to HPL IMM state to make JKTIP(HPL) impedance measure.
* 3. HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and
* transfer to IMM state to determine suppression sidetone gain.
* 4. IMM state : Computes cross talk suppression sidetone gain with orignal
* and cross talk signal level. Apply this gain and then restore codec
* configuration. Then transfer to Done state for ending.
*/
static void nau8825_xtalk_measure(struct nau8825 *nau8825)
{
u32 sidetone;
switch (nau8825->xtalk_state) {
case NAU8825_XTALK_PREPARE:
/* In prepare state, set up clock, intrruption, DAC path, ADC
* path and cross talk detection parameters for preparation.
*/
nau8825_xtalk_prepare(nau8825);
msleep(280);
/* Trigger right headphone impedance detection */
nau8825->xtalk_state = NAU8825_XTALK_HPR_R2L;
nau8825_xtalk_imm_start(nau8825, 0x00d2);
break;
case NAU8825_XTALK_HPR_R2L:
/* In right headphone IMM state, read out right headphone
* impedance measure result, and then start up left side.
*/
regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L,
&nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]);
dev_dbg(nau8825->dev, "HPR_R2L imm: %x\n",
nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]);
/* Disable then re-enable IMM mode to update */
nau8825_xtalk_imm_stop(nau8825);
/* Trigger left headphone impedance detection */
nau8825->xtalk_state = NAU8825_XTALK_HPL_R2L;
nau8825_xtalk_imm_start(nau8825, 0x00ff);
break;
case NAU8825_XTALK_HPL_R2L:
/* In left headphone IMM state, read out left headphone
* impedance measure result, and delay some time to wait
* detection sine wave output finish. Then, we can calculate
* the cross talk suppresstion side tone according to the L/R
* headphone imedance.
*/
regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L,
&nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]);
dev_dbg(nau8825->dev, "HPL_R2L imm: %x\n",
nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]);
nau8825_xtalk_imm_stop(nau8825);
msleep(150);
nau8825->xtalk_state = NAU8825_XTALK_IMM;
break;
case NAU8825_XTALK_IMM:
/* In impedance measure state, the orignal and cross talk
* signal level vlues are ready. The side tone gain is deter-
* mined with these signal level. After all, restore codec
* configuration.
*/
sidetone = nau8825_xtalk_sidetone(
nau8825->imp_rms[NAU8825_XTALK_HPR_R2L],
nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]);
dev_dbg(nau8825->dev, "cross talk sidetone: %x\n", sidetone);
regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL,
(sidetone << 8) | sidetone);
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
nau8825_xtalk_clean(nau8825, false);
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
nau8825->xtalk_state = NAU8825_XTALK_DONE;
break;
default:
break;
}
}
static void nau8825_xtalk_work(struct work_struct *work)
{
struct nau8825 *nau8825 = container_of(
work, struct nau8825, xtalk_work);
nau8825_xtalk_measure(nau8825);
/* To determine the cross talk side tone gain when reach
* the impedance measure state.
*/
if (nau8825->xtalk_state == NAU8825_XTALK_IMM)
nau8825_xtalk_measure(nau8825);
/* Delay jack report until cross talk detection process
* completed. It can avoid application to do playback
* preparation before cross talk detection is still working.
* Meanwhile, the protection of the cross talk detection
* is released.
*/
if (nau8825->xtalk_state == NAU8825_XTALK_DONE) {
snd_soc_jack_report(nau8825->jack, nau8825->xtalk_event,
nau8825->xtalk_event_mask);
nau8825_sema_release(nau8825);
nau8825->xtalk_protect = false;
}
}
static void nau8825_xtalk_cancel(struct nau8825 *nau8825)
{
ASoC: nau8825: disable crosstalk by default The driver makes the crosstalk funciton disabled by default which can simplify the codec function. The platform may not need this funciton and reduce the potential risk. Therefore, We change the property "nuvoton,crosstalk-bypass" to "nuvoton,crosstalk-enable". The crosstalk measurement is enabled if the property is set. Otherwise, it is disabled. Besides, add more condition in the entry point of the crosstalk sequence to disable the function completely. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-24 10:08:26 +00:00
/* If the crosstalk is eanbled and the process is on going,
* the driver forces to cancel the crosstalk task and
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
* restores the configuration to original status.
*/
ASoC: nau8825: disable crosstalk by default The driver makes the crosstalk funciton disabled by default which can simplify the codec function. The platform may not need this funciton and reduce the potential risk. Therefore, We change the property "nuvoton,crosstalk-bypass" to "nuvoton,crosstalk-enable". The crosstalk measurement is enabled if the property is set. Otherwise, it is disabled. Besides, add more condition in the entry point of the crosstalk sequence to disable the function completely. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-24 10:08:26 +00:00
if (nau8825->xtalk_enable && nau8825->xtalk_state !=
NAU8825_XTALK_DONE) {
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
cancel_work_sync(&nau8825->xtalk_work);
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
nau8825_xtalk_clean(nau8825, true);
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
}
/* Reset parameters for cross talk suppression function */
nau8825_sema_reset(nau8825);
nau8825->xtalk_state = NAU8825_XTALK_DONE;
nau8825->xtalk_protect = false;
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
static bool nau8825_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
case NAU8825_REG_ENA_CTRL ... NAU8825_REG_FLL_VCO_RSV:
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL:
case NAU8825_REG_INTERRUPT_MASK ... NAU8825_REG_KEYDET_CTRL:
case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL:
case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY:
case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY:
case NAU8825_REG_IMM_MODE_CTRL ... NAU8825_REG_IMM_RMS_R:
case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL:
case NAU8825_REG_MISC_CTRL:
case NAU8825_REG_I2C_DEVICE_ID ... NAU8825_REG_SARDOUT_RAM_STATUS:
case NAU8825_REG_BIAS_ADJ:
case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2:
case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS:
case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA:
case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_GENERAL_STATUS:
return true;
default:
return false;
}
}
static bool nau8825_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
case NAU8825_REG_RESET ... NAU8825_REG_FLL_VCO_RSV:
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL:
case NAU8825_REG_INTERRUPT_MASK:
case NAU8825_REG_INT_CLR_KEY_STATUS ... NAU8825_REG_KEYDET_CTRL:
case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL:
case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY:
case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY:
case NAU8825_REG_IMM_MODE_CTRL:
case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL:
case NAU8825_REG_MISC_CTRL:
case NAU8825_REG_BIAS_ADJ:
case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2:
case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS:
case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA:
case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_CHARGE_PUMP:
return true;
default:
return false;
}
}
static bool nau8825_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case NAU8825_REG_RESET:
case NAU8825_REG_IRQ_STATUS:
case NAU8825_REG_INT_CLR_KEY_STATUS:
case NAU8825_REG_IMM_RMS_L:
case NAU8825_REG_IMM_RMS_R:
case NAU8825_REG_I2C_DEVICE_ID:
case NAU8825_REG_SARDOUT_RAM_STATUS:
case NAU8825_REG_CHARGE_PUMP_INPUT_READ:
case NAU8825_REG_GENERAL_STATUS:
ASoC: nau8825: add programmable biquad filter control Add programmable biquad filter configuration control for user space. The filter is configurable for low pass filters, high pass filters, Notch filter, etc in the ADC and DAC path. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-31 03:57:41 +00:00
case NAU8825_REG_BIQ_CTRL ... NAU8825_REG_BIQ_COF10:
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
return true;
default:
return false;
}
}
ASoC: nau8825: change output power for interrupt The interrupt clock is gated by x1[10:8], one of them needs to be enabled all the time for interrupts to happen. We change codec to enable ADC because it's helpful to reduce playback pop noise. Don't use force enable pin to enable ADC instead of ADC widget event. That won't interfere DAPM operation and let bias work normally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-22 03:57:20 +00:00
static int nau8825_adc_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: change output power for interrupt The interrupt clock is gated by x1[10:8], one of them needs to be enabled all the time for interrupts to happen. We change codec to enable ADC because it's helpful to reduce playback pop noise. Don't use force enable pin to enable ADC instead of ADC widget event. That won't interfere DAPM operation and let bias work normally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-22 03:57:20 +00:00
switch (event) {
case SND_SOC_DAPM_POST_PMU:
ASoC: nau8825: fix issue that pop noise when start capture In skylake platform, we hear a loud pop noise(0 dB) at start of audio capture power up sequence. This patch removes the pop noise from the recording by adding a delay before enabling ADC. Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-11 19:10:25 +00:00
msleep(125);
ASoC: nau8825: change output power for interrupt The interrupt clock is gated by x1[10:8], one of them needs to be enabled all the time for interrupts to happen. We change codec to enable ADC because it's helpful to reduce playback pop noise. Don't use force enable pin to enable ADC instead of ADC widget event. That won't interfere DAPM operation and let bias work normally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-22 03:57:20 +00:00
regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC);
break;
case SND_SOC_DAPM_POST_PMD:
if (!nau8825->irq)
regmap_update_bits(nau8825->regmap,
NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0);
break;
default:
return -EINVAL;
}
return 0;
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
static int nau8825_pump_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
switch (event) {
case SND_SOC_DAPM_POST_PMU:
/* Prevent startup click by letting charge pump to ramp up */
msleep(10);
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_JAMNODCLOW, NAU8825_JAMNODCLOW);
break;
case SND_SOC_DAPM_PRE_PMD:
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_JAMNODCLOW, 0);
break;
default:
return -EINVAL;
}
return 0;
}
static int nau8825_output_dac_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
/* Disables the TESTDAC to let DAC signal pass through. */
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_TESTDAC_EN, 0);
break;
case SND_SOC_DAPM_POST_PMD:
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
break;
default:
return -EINVAL;
}
return 0;
}
ASoC: nau8825: add programmable biquad filter control Add programmable biquad filter configuration control for user space. The filter is configurable for low pass filters, high pass filters, Notch filter, etc in the ADC and DAC path. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-31 03:57:41 +00:00
static int nau8825_biq_coeff_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct soc_bytes_ext *params = (void *)kcontrol->private_value;
if (!component->regmap)
return -EINVAL;
regmap_raw_read(component->regmap, NAU8825_REG_BIQ_COF1,
ucontrol->value.bytes.data, params->max);
return 0;
}
static int nau8825_biq_coeff_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct soc_bytes_ext *params = (void *)kcontrol->private_value;
void *data;
if (!component->regmap)
return -EINVAL;
data = kmemdup(ucontrol->value.bytes.data,
params->max, GFP_KERNEL | GFP_DMA);
if (!data)
return -ENOMEM;
regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL,
NAU8825_BIQ_WRT_EN, 0);
regmap_raw_write(component->regmap, NAU8825_REG_BIQ_COF1,
data, params->max);
regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL,
NAU8825_BIQ_WRT_EN, NAU8825_BIQ_WRT_EN);
kfree(data);
return 0;
}
static const char * const nau8825_biq_path[] = {
"ADC", "DAC"
};
static const struct soc_enum nau8825_biq_path_enum =
SOC_ENUM_SINGLE(NAU8825_REG_BIQ_CTRL, NAU8825_BIQ_PATH_SFT,
ARRAY_SIZE(nau8825_biq_path), nau8825_biq_path);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
static const char * const nau8825_adc_decimation[] = {
"32", "64", "128", "256"
};
static const struct soc_enum nau8825_adc_decimation_enum =
SOC_ENUM_SINGLE(NAU8825_REG_ADC_RATE, NAU8825_ADC_SYNC_DOWN_SFT,
ARRAY_SIZE(nau8825_adc_decimation), nau8825_adc_decimation);
static const char * const nau8825_dac_oversampl[] = {
"64", "256", "128", "", "32"
};
static const struct soc_enum nau8825_dac_oversampl_enum =
SOC_ENUM_SINGLE(NAU8825_REG_DAC_CTRL1, NAU8825_DAC_OVERSAMPLE_SFT,
ARRAY_SIZE(nau8825_dac_oversampl), nau8825_dac_oversampl);
static const DECLARE_TLV_DB_MINMAX_MUTE(adc_vol_tlv, -10300, 2400);
static const DECLARE_TLV_DB_MINMAX_MUTE(sidetone_vol_tlv, -4200, 0);
static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -5400, 0);
static const DECLARE_TLV_DB_MINMAX(fepga_gain_tlv, -100, 3600);
static const DECLARE_TLV_DB_MINMAX_MUTE(crosstalk_vol_tlv, -9600, 2400);
static const struct snd_kcontrol_new nau8825_controls[] = {
SOC_SINGLE_TLV("Mic Volume", NAU8825_REG_ADC_DGAIN_CTRL,
0, 0xff, 0, adc_vol_tlv),
SOC_DOUBLE_TLV("Headphone Bypass Volume", NAU8825_REG_ADC_DGAIN_CTRL,
12, 8, 0x0f, 0, sidetone_vol_tlv),
SOC_DOUBLE_TLV("Headphone Volume", NAU8825_REG_HSVOL_CTRL,
6, 0, 0x3f, 1, dac_vol_tlv),
SOC_SINGLE_TLV("Frontend PGA Volume", NAU8825_REG_POWER_UP_CONTROL,
8, 37, 0, fepga_gain_tlv),
SOC_DOUBLE_TLV("Headphone Crosstalk Volume", NAU8825_REG_DAC_DGAIN_CTRL,
0, 8, 0xff, 0, crosstalk_vol_tlv),
SOC_ENUM("ADC Decimation Rate", nau8825_adc_decimation_enum),
SOC_ENUM("DAC Oversampling Rate", nau8825_dac_oversampl_enum),
ASoC: nau8825: add programmable biquad filter control Add programmable biquad filter configuration control for user space. The filter is configurable for low pass filters, high pass filters, Notch filter, etc in the ADC and DAC path. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-31 03:57:41 +00:00
/* programmable biquad filter */
SOC_ENUM("BIQ Path Select", nau8825_biq_path_enum),
ASoC: nau8825: correct typo in biquad filter coefficients There is typo in the name of biquad filter coefficients control. The patch is to fix the typo. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-03 04:02:16 +00:00
SND_SOC_BYTES_EXT("BIQ Coefficients", 20,
ASoC: nau8825: add programmable biquad filter control Add programmable biquad filter configuration control for user space. The filter is configurable for low pass filters, high pass filters, Notch filter, etc in the ADC and DAC path. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-31 03:57:41 +00:00
nau8825_biq_coeff_get, nau8825_biq_coeff_put),
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
};
/* DAC Mux 0x33[9] and 0x34[9] */
static const char * const nau8825_dac_src[] = {
"DACL", "DACR",
};
static SOC_ENUM_SINGLE_DECL(
nau8825_dacl_enum, NAU8825_REG_DACL_CTRL,
NAU8825_DACL_CH_SEL_SFT, nau8825_dac_src);
static SOC_ENUM_SINGLE_DECL(
nau8825_dacr_enum, NAU8825_REG_DACR_CTRL,
NAU8825_DACR_CH_SEL_SFT, nau8825_dac_src);
static const struct snd_kcontrol_new nau8825_dacl_mux =
SOC_DAPM_ENUM("DACL Source", nau8825_dacl_enum);
static const struct snd_kcontrol_new nau8825_dacr_mux =
SOC_DAPM_ENUM("DACR Source", nau8825_dacr_enum);
static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = {
SND_SOC_DAPM_AIF_OUT("AIFTX", "Capture", 0, NAU8825_REG_I2S_PCM_CTRL2,
15, 1),
SND_SOC_DAPM_INPUT("MIC"),
SND_SOC_DAPM_MICBIAS("MICBIAS", NAU8825_REG_MIC_BIAS, 8, 0),
SND_SOC_DAPM_PGA("Frontend PGA", NAU8825_REG_POWER_UP_CONTROL, 14, 0,
NULL, 0),
ASoC: nau8825: change output power for interrupt The interrupt clock is gated by x1[10:8], one of them needs to be enabled all the time for interrupts to happen. We change codec to enable ADC because it's helpful to reduce playback pop noise. Don't use force enable pin to enable ADC instead of ADC widget event. That won't interfere DAPM operation and let bias work normally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-22 03:57:20 +00:00
SND_SOC_DAPM_ADC_E("ADC", NULL, SND_SOC_NOPM, 0, 0,
nau8825_adc_event, SND_SOC_DAPM_POST_PMU |
SND_SOC_DAPM_POST_PMD),
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
SND_SOC_DAPM_SUPPLY("ADC Clock", NAU8825_REG_ENA_CTRL, 7, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL,
0),
ASoC: nau8825: Fix jack detection across suspend Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power. Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-25 23:10:39 +00:00
/* ADC for button press detection. A dapm supply widget is used to
* prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON
* during suspend.
*/
SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL,
NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0),
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("ADACL Clock", 3, NAU8825_REG_RDAC, 8, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("ADACR Clock", 3, NAU8825_REG_RDAC, 9, 0, NULL, 0),
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
SND_SOC_DAPM_DAC("DDACR", NULL, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_DACR_SFT, 0),
SND_SOC_DAPM_DAC("DDACL", NULL, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_DACL_SFT, 0),
SND_SOC_DAPM_SUPPLY("DDAC Clock", NAU8825_REG_ENA_CTRL, 6, 0, NULL, 0),
SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacl_mux),
SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacr_mux),
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
SND_SOC_DAPM_PGA_S("HP amp L", 0,
NAU8825_REG_CLASSG_CTRL, 1, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HP amp R", 0,
NAU8825_REG_CLASSG_CTRL, 2, 0, NULL, 0),
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
SND_SOC_DAPM_PGA_S("Charge Pump", 1, NAU8825_REG_CHARGE_PUMP, 5, 0,
nau8825_pump_event, SND_SOC_DAPM_POST_PMU |
SND_SOC_DAPM_PRE_PMD),
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
SND_SOC_DAPM_PGA_S("Output Driver R Stage 1", 4,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
NAU8825_REG_POWER_UP_CONTROL, 5, 0, NULL, 0),
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
SND_SOC_DAPM_PGA_S("Output Driver L Stage 1", 4,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
NAU8825_REG_POWER_UP_CONTROL, 4, 0, NULL, 0),
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
SND_SOC_DAPM_PGA_S("Output Driver R Stage 2", 5,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
NAU8825_REG_POWER_UP_CONTROL, 3, 0, NULL, 0),
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
SND_SOC_DAPM_PGA_S("Output Driver L Stage 2", 5,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
NAU8825_REG_POWER_UP_CONTROL, 2, 0, NULL, 0),
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
SND_SOC_DAPM_PGA_S("Output Driver R Stage 3", 6,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
NAU8825_REG_POWER_UP_CONTROL, 1, 0, NULL, 0),
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
SND_SOC_DAPM_PGA_S("Output Driver L Stage 3", 6,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
NAU8825_REG_POWER_UP_CONTROL, 0, 0, NULL, 0),
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
SND_SOC_DAPM_PGA_S("Output DACL", 7,
NAU8825_REG_CHARGE_PUMP, 8, 1, nau8825_output_dac_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_PGA_S("Output DACR", 7,
NAU8825_REG_CHARGE_PUMP, 9, 1, nau8825_output_dac_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
/* HPOL/R are ungrounded by disabling 16 Ohm pull-downs on playback */
SND_SOC_DAPM_PGA_S("HPOL Pulldown", 8,
NAU8825_REG_HSD_CTRL, 0, 1, NULL, 0),
SND_SOC_DAPM_PGA_S("HPOR Pulldown", 8,
NAU8825_REG_HSD_CTRL, 1, 1, NULL, 0),
/* High current HPOL/R boost driver */
SND_SOC_DAPM_PGA_S("HP Boost Driver", 9,
NAU8825_REG_BOOST, 9, 1, NULL, 0),
/* Class G operation control*/
SND_SOC_DAPM_PGA_S("Class G", 10,
NAU8825_REG_CLASSG_CTRL, 0, 0, NULL, 0),
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
SND_SOC_DAPM_OUTPUT("HPOL"),
SND_SOC_DAPM_OUTPUT("HPOR"),
};
static const struct snd_soc_dapm_route nau8825_dapm_routes[] = {
{"Frontend PGA", NULL, "MIC"},
{"ADC", NULL, "Frontend PGA"},
{"ADC", NULL, "ADC Clock"},
{"ADC", NULL, "ADC Power"},
{"AIFTX", NULL, "ADC"},
{"DDACL", NULL, "Playback"},
{"DDACR", NULL, "Playback"},
{"DDACL", NULL, "DDAC Clock"},
{"DDACR", NULL, "DDAC Clock"},
{"DACL Mux", "DACL", "DDACL"},
{"DACL Mux", "DACR", "DDACR"},
{"DACR Mux", "DACL", "DDACL"},
{"DACR Mux", "DACR", "DDACR"},
{"HP amp L", NULL, "DACL Mux"},
{"HP amp R", NULL, "DACR Mux"},
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
{"Charge Pump", NULL, "HP amp L"},
{"Charge Pump", NULL, "HP amp R"},
{"ADACL", NULL, "Charge Pump"},
{"ADACR", NULL, "Charge Pump"},
{"ADACL Clock", NULL, "ADACL"},
{"ADACR Clock", NULL, "ADACR"},
{"Output Driver L Stage 1", NULL, "ADACL Clock"},
{"Output Driver R Stage 1", NULL, "ADACR Clock"},
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
{"Output Driver L Stage 2", NULL, "Output Driver L Stage 1"},
{"Output Driver R Stage 2", NULL, "Output Driver R Stage 1"},
{"Output Driver L Stage 3", NULL, "Output Driver L Stage 2"},
{"Output Driver R Stage 3", NULL, "Output Driver R Stage 2"},
{"Output DACL", NULL, "Output Driver L Stage 3"},
{"Output DACR", NULL, "Output Driver R Stage 3"},
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
{"HPOL Pulldown", NULL, "Output DACL"},
{"HPOR Pulldown", NULL, "Output DACR"},
{"HP Boost Driver", NULL, "HPOL Pulldown"},
{"HP Boost Driver", NULL, "HPOR Pulldown"},
{"Class G", NULL, "HP Boost Driver"},
{"HPOL", NULL, "Class G"},
{"HPOR", NULL, "Class G"},
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
};
ASoC: nau8825: AD/DA over sampling rate configuration Over Sampling Rate (OSR) is defined as CLK_ADC frequency divided by the audio sample rate (Fs). OSR = CLK_ADC / FS The available OSRs are 32, 64, 128 or 256. Note that the OSR and Fs values must be selected such that the maximum frequency of CLK_ADC is less than 6.144 MHz. It is recommended to match the relationship between OSR and clock SRC according to following Table. ADC_RATE: 00(OSR=32) | CLK_ADC_SRC: 11(CODEC 1/8) ADC_RATE: 01(OSR=64) | CLK_ADC_SRC: 10(CODEC1/4) ADC_RATE: 10(OSR=128) | CLK_ADC_SRC: 01(CODEC 1/2) ADC_RATE: 11(OSR=256) | CLK_ADC_SRC: 00(CODEC CLK) The over sampling rate about DAC follows the same rule with ADCs. The driver changes the OSR to 64 value when initiation for better FLL performance and applies the dynamic SRC change by different OSR. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 03:34:42 +00:00
static int nau8825_clock_check(struct nau8825 *nau8825,
int stream, int rate, int osr)
{
int osrate;
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
if (osr >= ARRAY_SIZE(osr_dac_sel))
return -EINVAL;
osrate = osr_dac_sel[osr].osr;
} else {
if (osr >= ARRAY_SIZE(osr_adc_sel))
return -EINVAL;
osrate = osr_adc_sel[osr].osr;
}
if (!osrate || rate * osr > CLK_DA_AD_MAX) {
dev_err(nau8825->dev, "exceed the maximum frequency of CLK_ADC or CLK_DAC\n");
return -EINVAL;
}
return 0;
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
static int nau8825_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct snd_soc_component *component = dai->component;
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: automatic BCLK and LRC divde in master mode configurable LRC and BCLK divide. The driver will make configurations of LRC and BCLK automatically according to BCLK and FS information in master mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-17 01:55:33 +00:00
unsigned int val_len = 0, osr, ctrl_val, bclk_fs, bclk_div;
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
ASoC: nau8825: lock longer to avoid playback pop upon resume There is an issue about pop noise in NAU88L25 as follows. Issue 54078: Chell_headphone pop back from S3 (1)Play directly to hw, bypassing CRAS: sox -b 16 -n -t alsa hw:0,0 synth sine 200 sine 200 (2)Close lid or powerd_dbus_suspend, then press a key to resume. (3)no audio after resume (4)Audio will be back after close then reopen the pcm device. After verification, we find one defect is that semaphone lock is not long enough and expired. In this situation, the playback comes back early but pauses a while to wait for the crosstalk detection done. But the detection spends too much time and lock time is up. Therefore, the playback and jack detection sequence interfere to each other. That breaks sequence and makes noise. The driver extends the lock time for the issue. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-29 02:05:16 +00:00
nau8825_sema_acquire(nau8825, 3 * HZ);
ASoC: nau8825: fix bug in playback when suspend In chromium, the following steps will make codec function fail. \1. plug in headphones, Play music \2. run "powerd_dbus_suspend" \3. resume from S3 After resume, the jack detection will restart and make configuration for the headset. Meanwhile, the playback prepares and starts to work. The two sequences will conflict and make wrong register configuration. Originally, the driver adds protection for the case when it finds the playback is active. But the "powerd_dbus_suspend" command will close the pcm stream before suspend. Therefore, the driver can't detect the playback after resume, and the protection not works. For the issue, the driver raises protection every time after resume. The protection will release after jack detection and configuration completes, and then the playback just will goes on. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:06 +00:00
ASoC: nau8825: AD/DA over sampling rate configuration Over Sampling Rate (OSR) is defined as CLK_ADC frequency divided by the audio sample rate (Fs). OSR = CLK_ADC / FS The available OSRs are 32, 64, 128 or 256. Note that the OSR and Fs values must be selected such that the maximum frequency of CLK_ADC is less than 6.144 MHz. It is recommended to match the relationship between OSR and clock SRC according to following Table. ADC_RATE: 00(OSR=32) | CLK_ADC_SRC: 11(CODEC 1/8) ADC_RATE: 01(OSR=64) | CLK_ADC_SRC: 10(CODEC1/4) ADC_RATE: 10(OSR=128) | CLK_ADC_SRC: 01(CODEC 1/2) ADC_RATE: 11(OSR=256) | CLK_ADC_SRC: 00(CODEC CLK) The over sampling rate about DAC follows the same rule with ADCs. The driver changes the OSR to 64 value when initiation for better FLL performance and applies the dynamic SRC change by different OSR. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 03:34:42 +00:00
/* CLK_DAC or CLK_ADC = OSR * FS
* DAC or ADC clock frequency is defined as Over Sampling Rate (OSR)
* multiplied by the audio sample rate (Fs). Note that the OSR and Fs
* values must be selected such that the maximum frequency is less
* than 6.144 MHz.
*/
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
regmap_read(nau8825->regmap, NAU8825_REG_DAC_CTRL1, &osr);
osr &= NAU8825_DAC_OVERSAMPLE_MASK;
if (nau8825_clock_check(nau8825, substream->stream,
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
params_rate(params), osr)) {
nau8825_sema_release(nau8825);
ASoC: nau8825: AD/DA over sampling rate configuration Over Sampling Rate (OSR) is defined as CLK_ADC frequency divided by the audio sample rate (Fs). OSR = CLK_ADC / FS The available OSRs are 32, 64, 128 or 256. Note that the OSR and Fs values must be selected such that the maximum frequency of CLK_ADC is less than 6.144 MHz. It is recommended to match the relationship between OSR and clock SRC according to following Table. ADC_RATE: 00(OSR=32) | CLK_ADC_SRC: 11(CODEC 1/8) ADC_RATE: 01(OSR=64) | CLK_ADC_SRC: 10(CODEC1/4) ADC_RATE: 10(OSR=128) | CLK_ADC_SRC: 01(CODEC 1/2) ADC_RATE: 11(OSR=256) | CLK_ADC_SRC: 00(CODEC CLK) The over sampling rate about DAC follows the same rule with ADCs. The driver changes the OSR to 64 value when initiation for better FLL performance and applies the dynamic SRC change by different OSR. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 03:34:42 +00:00
return -EINVAL;
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
}
ASoC: nau8825: AD/DA over sampling rate configuration Over Sampling Rate (OSR) is defined as CLK_ADC frequency divided by the audio sample rate (Fs). OSR = CLK_ADC / FS The available OSRs are 32, 64, 128 or 256. Note that the OSR and Fs values must be selected such that the maximum frequency of CLK_ADC is less than 6.144 MHz. It is recommended to match the relationship between OSR and clock SRC according to following Table. ADC_RATE: 00(OSR=32) | CLK_ADC_SRC: 11(CODEC 1/8) ADC_RATE: 01(OSR=64) | CLK_ADC_SRC: 10(CODEC1/4) ADC_RATE: 10(OSR=128) | CLK_ADC_SRC: 01(CODEC 1/2) ADC_RATE: 11(OSR=256) | CLK_ADC_SRC: 00(CODEC CLK) The over sampling rate about DAC follows the same rule with ADCs. The driver changes the OSR to 64 value when initiation for better FLL performance and applies the dynamic SRC change by different OSR. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 03:34:42 +00:00
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_DAC_SRC_MASK,
osr_dac_sel[osr].clk_src << NAU8825_CLK_DAC_SRC_SFT);
} else {
regmap_read(nau8825->regmap, NAU8825_REG_ADC_RATE, &osr);
osr &= NAU8825_ADC_SYNC_DOWN_MASK;
if (nau8825_clock_check(nau8825, substream->stream,
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
params_rate(params), osr)) {
nau8825_sema_release(nau8825);
ASoC: nau8825: AD/DA over sampling rate configuration Over Sampling Rate (OSR) is defined as CLK_ADC frequency divided by the audio sample rate (Fs). OSR = CLK_ADC / FS The available OSRs are 32, 64, 128 or 256. Note that the OSR and Fs values must be selected such that the maximum frequency of CLK_ADC is less than 6.144 MHz. It is recommended to match the relationship between OSR and clock SRC according to following Table. ADC_RATE: 00(OSR=32) | CLK_ADC_SRC: 11(CODEC 1/8) ADC_RATE: 01(OSR=64) | CLK_ADC_SRC: 10(CODEC1/4) ADC_RATE: 10(OSR=128) | CLK_ADC_SRC: 01(CODEC 1/2) ADC_RATE: 11(OSR=256) | CLK_ADC_SRC: 00(CODEC CLK) The over sampling rate about DAC follows the same rule with ADCs. The driver changes the OSR to 64 value when initiation for better FLL performance and applies the dynamic SRC change by different OSR. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 03:34:42 +00:00
return -EINVAL;
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
}
ASoC: nau8825: AD/DA over sampling rate configuration Over Sampling Rate (OSR) is defined as CLK_ADC frequency divided by the audio sample rate (Fs). OSR = CLK_ADC / FS The available OSRs are 32, 64, 128 or 256. Note that the OSR and Fs values must be selected such that the maximum frequency of CLK_ADC is less than 6.144 MHz. It is recommended to match the relationship between OSR and clock SRC according to following Table. ADC_RATE: 00(OSR=32) | CLK_ADC_SRC: 11(CODEC 1/8) ADC_RATE: 01(OSR=64) | CLK_ADC_SRC: 10(CODEC1/4) ADC_RATE: 10(OSR=128) | CLK_ADC_SRC: 01(CODEC 1/2) ADC_RATE: 11(OSR=256) | CLK_ADC_SRC: 00(CODEC CLK) The over sampling rate about DAC follows the same rule with ADCs. The driver changes the OSR to 64 value when initiation for better FLL performance and applies the dynamic SRC change by different OSR. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 03:34:42 +00:00
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_ADC_SRC_MASK,
osr_adc_sel[osr].clk_src << NAU8825_CLK_ADC_SRC_SFT);
}
ASoC: nau8825: automatic BCLK and LRC divde in master mode configurable LRC and BCLK divide. The driver will make configurations of LRC and BCLK automatically according to BCLK and FS information in master mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-17 01:55:33 +00:00
/* make BCLK and LRC divde configuration if the codec as master. */
regmap_read(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, &ctrl_val);
if (ctrl_val & NAU8825_I2S_MS_MASTER) {
/* get the bclk and fs ratio */
bclk_fs = snd_soc_params_to_bclk(params) / params_rate(params);
if (bclk_fs <= 32)
bclk_div = 2;
else if (bclk_fs <= 64)
bclk_div = 1;
else if (bclk_fs <= 128)
bclk_div = 0;
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
else {
nau8825_sema_release(nau8825);
ASoC: nau8825: automatic BCLK and LRC divde in master mode configurable LRC and BCLK divide. The driver will make configurations of LRC and BCLK automatically according to BCLK and FS information in master mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-17 01:55:33 +00:00
return -EINVAL;
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
}
ASoC: nau8825: automatic BCLK and LRC divde in master mode configurable LRC and BCLK divide. The driver will make configurations of LRC and BCLK automatically according to BCLK and FS information in master mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-17 01:55:33 +00:00
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK,
((bclk_div + 1) << NAU8825_I2S_LRC_DIV_SFT) | bclk_div);
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
switch (params_width(params)) {
case 16:
val_len |= NAU8825_I2S_DL_16;
break;
case 20:
val_len |= NAU8825_I2S_DL_20;
break;
case 24:
val_len |= NAU8825_I2S_DL_24;
break;
case 32:
val_len |= NAU8825_I2S_DL_32;
break;
default:
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
nau8825_sema_release(nau8825);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
return -EINVAL;
}
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1,
NAU8825_I2S_DL_MASK, val_len);
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Release the semaphore. */
ASoC: nau8825: fix bug in playback when suspend In chromium, the following steps will make codec function fail. \1. plug in headphones, Play music \2. run "powerd_dbus_suspend" \3. resume from S3 After resume, the jack detection will restart and make configuration for the headset. Meanwhile, the playback prepares and starts to work. The two sequences will conflict and make wrong register configuration. Originally, the driver adds protection for the case when it finds the playback is active. But the "powerd_dbus_suspend" command will close the pcm stream before suspend. Therefore, the driver can't detect the playback after resume, and the protection not works. For the issue, the driver raises protection every time after resume. The protection will release after jack detection and configuration completes, and then the playback just will goes on. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:06 +00:00
nau8825_sema_release(nau8825);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
return 0;
}
static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct snd_soc_component *component = codec_dai->component;
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
unsigned int ctrl1_val = 0, ctrl2_val = 0;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
ctrl2_val |= NAU8825_I2S_MS_MASTER;
break;
case SND_SOC_DAIFMT_CBS_CFS:
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_NF:
ctrl1_val |= NAU8825_I2S_BP_INV;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
ctrl1_val |= NAU8825_I2S_DF_I2S;
break;
case SND_SOC_DAIFMT_LEFT_J:
ctrl1_val |= NAU8825_I2S_DF_LEFT;
break;
case SND_SOC_DAIFMT_RIGHT_J:
ctrl1_val |= NAU8825_I2S_DF_RIGTH;
break;
case SND_SOC_DAIFMT_DSP_A:
ctrl1_val |= NAU8825_I2S_DF_PCM_AB;
break;
case SND_SOC_DAIFMT_DSP_B:
ctrl1_val |= NAU8825_I2S_DF_PCM_AB;
ctrl1_val |= NAU8825_I2S_PCMB_EN;
break;
default:
return -EINVAL;
}
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
nau8825_sema_acquire(nau8825, 3 * HZ);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1,
NAU8825_I2S_DL_MASK | NAU8825_I2S_DF_MASK |
NAU8825_I2S_BP_MASK | NAU8825_I2S_PCMB_MASK,
ctrl1_val);
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, ctrl2_val);
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Release the semaphore. */
ASoC: nau8825: fix bug in playback when suspend In chromium, the following steps will make codec function fail. \1. plug in headphones, Play music \2. run "powerd_dbus_suspend" \3. resume from S3 After resume, the jack detection will restart and make configuration for the headset. Meanwhile, the playback prepares and starts to work. The two sequences will conflict and make wrong register configuration. Originally, the driver adds protection for the case when it finds the playback is active. But the "powerd_dbus_suspend" command will close the pcm stream before suspend. Therefore, the driver can't detect the playback after resume, and the protection not works. For the issue, the driver raises protection every time after resume. The protection will release after jack detection and configuration completes, and then the playback just will goes on. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:06 +00:00
nau8825_sema_release(nau8825);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
return 0;
}
static const struct snd_soc_dai_ops nau8825_dai_ops = {
.hw_params = nau8825_hw_params,
.set_fmt = nau8825_set_dai_fmt,
};
#define NAU8825_RATES SNDRV_PCM_RATE_8000_192000
#define NAU8825_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \
| SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
static struct snd_soc_dai_driver nau8825_dai = {
.name = "nau8825-hifi",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = 2,
.rates = NAU8825_RATES,
.formats = NAU8825_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 1,
.channels_max = 1,
.rates = NAU8825_RATES,
.formats = NAU8825_FORMATS,
},
.ops = &nau8825_dai_ops,
};
/**
* nau8825_enable_jack_detect - Specify a jack for event reporting
*
* @component: component to register the jack with
* @jack: jack to use to report headset and button events on
*
* After this function has been called the headset insert/remove and button
* events will be routed to the given jack. Jack can be null to stop
* reporting.
*/
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
int nau8825_enable_jack_detect(struct snd_soc_component *component,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
struct snd_soc_jack *jack)
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
struct regmap *regmap = nau8825->regmap;
nau8825->jack = jack;
/* Ground HP Outputs[1:0], needed for headset auto detection
* Enable Automatic Mic/Gnd switching reading on insert interrupt[6]
*/
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L,
NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
return 0;
}
EXPORT_SYMBOL_GPL(nau8825_enable_jack_detect);
static bool nau8825_is_jack_inserted(struct regmap *regmap)
{
ASoC: nau8825: jack connection decision with different insertion logic The original design only covers the jack insertion logic is active low. Add more condition to cover no matter the logic is active low and high. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-06 02:09:35 +00:00
bool active_high, is_high;
int status, jkdet;
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
ASoC: nau8825: jack connection decision with different insertion logic The original design only covers the jack insertion logic is active low. Add more condition to cover no matter the logic is active low and high. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-06 02:09:35 +00:00
regmap_read(regmap, NAU8825_REG_JACK_DET_CTRL, &jkdet);
ASoC: nau8825: drop redundant idiom when converting integer to boolean Thanks Mark and Anatol for the discussion. According to the result, the standard C will translate any non-zero value into true, or false otherwise. QUOTE: "6.3.1.2 Boolean type When any scalar value is converted to _Bool, the result is 0 if the value compares equal to 0; otherwise, the result is 1 " Thus, the "!!" idiom is removed. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-15 02:06:17 +00:00
active_high = jkdet & NAU8825_JACK_POLARITY;
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
regmap_read(regmap, NAU8825_REG_I2C_DEVICE_ID, &status);
ASoC: nau8825: drop redundant idiom when converting integer to boolean Thanks Mark and Anatol for the discussion. According to the result, the standard C will translate any non-zero value into true, or false otherwise. QUOTE: "6.3.1.2 Boolean type When any scalar value is converted to _Bool, the result is 0 if the value compares equal to 0; otherwise, the result is 1 " Thus, the "!!" idiom is removed. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-15 02:06:17 +00:00
is_high = status & NAU8825_GPIO2JD1;
ASoC: nau8825: jack connection decision with different insertion logic The original design only covers the jack insertion logic is active low. Add more condition to cover no matter the logic is active low and high. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-06 02:09:35 +00:00
/* return jack connection status according to jack insertion logic
* active high or active low.
*/
return active_high == is_high;
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
}
static void nau8825_restart_jack_detection(struct regmap *regmap)
{
/* this will restart the entire jack detection process including MIC/GND
* switching and create interrupts. We have to go from 0 to 1 and back
* to 0 to restart.
*/
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
NAU8825_JACK_DET_RESTART, NAU8825_JACK_DET_RESTART);
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
NAU8825_JACK_DET_RESTART, 0);
}
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
static void nau8825_int_status_clear_all(struct regmap *regmap)
{
int active_irq, clear_irq, i;
/* Reset the intrruption status from rightmost bit if the corres-
* ponding irq event occurs.
*/
regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq);
for (i = 0; i < NAU8825_REG_DATA_LEN; i++) {
clear_irq = (0x1 << i);
if (active_irq & clear_irq)
regmap_write(regmap,
NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq);
}
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
static void nau8825_eject_jack(struct nau8825 *nau8825)
{
struct snd_soc_dapm_context *dapm = nau8825->dapm;
struct regmap *regmap = nau8825->regmap;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* Force to cancel the cross talk detection process */
nau8825_xtalk_cancel(nau8825);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
snd_soc_dapm_disable_pin(dapm, "SAR");
snd_soc_dapm_disable_pin(dapm, "MICBIAS");
/* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0);
/* ground HPL/HPR, MICGRND1/2 */
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 0xf, 0xf);
snd_soc_dapm_sync(dapm);
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
/* Clear all interruption status */
nau8825_int_status_clear_all(regmap);
/* Enable the insertion interruption, disable the ejection inter-
* ruption, and then bypass de-bounce circuit.
*/
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL,
NAU8825_IRQ_EJECT_DIS | NAU8825_IRQ_INSERT_DIS,
NAU8825_IRQ_EJECT_DIS);
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN |
NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_INSERT_EN,
NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN |
NAU8825_IRQ_HEADSET_COMPLETE_EN);
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS);
/* Disable ADC needed for interruptions at audo mode */
regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_ADC, 0);
/* Close clock for jack type detection at manual mode */
nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0);
}
/* Enable audo mode interruptions with internal clock. */
static void nau8825_setup_auto_irq(struct nau8825 *nau8825)
{
struct regmap *regmap = nau8825->regmap;
/* Enable headset jack type detection complete interruption and
* jack ejection interruption.
*/
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_EJECT_EN, 0);
/* Enable internal VCO needed for interruptions */
nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0);
/* Enable ADC needed for interruptions */
regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC);
/* Chip needs one FSCLK cycle in order to generate interruptions,
* as we cannot guarantee one will be provided by the system. Turning
* master mode on then off enables us to generate that FSCLK cycle
* with a minimum of contention on the clock bus.
*/
regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);
regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
/* Not bypass de-bounce circuit */
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
NAU8825_JACK_DET_DB_BYPASS, 0);
/* Unmask all interruptions */
regmap_write(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 0);
/* Restart the jack detection process at auto mode */
nau8825_restart_jack_detection(regmap);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
}
static int nau8825_button_decode(int value)
{
int buttons = 0;
/* The chip supports up to 8 buttons, but ALSA defines only 6 buttons */
if (value & BIT(0))
buttons |= SND_JACK_BTN_0;
if (value & BIT(1))
buttons |= SND_JACK_BTN_1;
if (value & BIT(2))
buttons |= SND_JACK_BTN_2;
if (value & BIT(3))
buttons |= SND_JACK_BTN_3;
if (value & BIT(4))
buttons |= SND_JACK_BTN_4;
if (value & BIT(5))
buttons |= SND_JACK_BTN_5;
return buttons;
}
static int nau8825_jack_insert(struct nau8825 *nau8825)
{
struct regmap *regmap = nau8825->regmap;
struct snd_soc_dapm_context *dapm = nau8825->dapm;
int jack_status_reg, mic_detected;
int type = 0;
regmap_read(regmap, NAU8825_REG_GENERAL_STATUS, &jack_status_reg);
mic_detected = (jack_status_reg >> 10) & 3;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* The JKSLV and JKR2 all detected in high impedance headset */
if (mic_detected == 0x3)
nau8825->high_imped = true;
else
nau8825->high_imped = false;
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
switch (mic_detected) {
case 0:
/* no mic */
type = SND_JACK_HEADPHONE;
break;
case 1:
dev_dbg(nau8825->dev, "OMTP (micgnd1) mic connected\n");
type = SND_JACK_HEADSET;
/* Unground MICGND1 */
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2,
1 << 2);
/* Attach 2kOhm Resistor from MICBIAS to MICGND1 */
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
NAU8825_MICBIAS_JKR2);
/* Attach SARADC to MICGND1 */
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_INPUT_MASK,
NAU8825_SAR_INPUT_JKR2);
snd_soc_dapm_force_enable_pin(dapm, "MICBIAS");
snd_soc_dapm_force_enable_pin(dapm, "SAR");
snd_soc_dapm_sync(dapm);
break;
case 2:
dev_dbg(nau8825->dev, "CTIA (micgnd2) mic connected\n");
type = SND_JACK_HEADSET;
/* Unground MICGND2 */
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2,
2 << 2);
/* Attach 2kOhm Resistor from MICBIAS to MICGND2 */
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
NAU8825_MICBIAS_JKSLV);
/* Attach SARADC to MICGND2 */
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_INPUT_MASK,
NAU8825_SAR_INPUT_JKSLV);
snd_soc_dapm_force_enable_pin(dapm, "MICBIAS");
snd_soc_dapm_force_enable_pin(dapm, "SAR");
snd_soc_dapm_sync(dapm);
break;
ASoC: nau8825: fix jack type detection issue after resume Fix the issue that mic type detection error after resume. The microphone type detection procedure will recognize testing signal on JKSLV pin, but before the procedure, JKSLV already had supply voltage, that results in the failure. Therefore, the patch turns off the power and reset the jack type configuration before suspend. Then redo the jack detection procedure after resume. The patch help to fix the issue as follows: Google issue 37973093: CTIA/OMTP jack type detection failure after resume Reported Issue Chrome OS Version : ChromeOS R59-9460.13.0 Type of hardware : DVT sample What steps will reproduce the problem? (1 Play a music (2 Insert a headphones (3 Close laptop lid 3 sec then open it What is the expected output? The music is normal in the headphones. What do you see instead? Singer voice in the music is not clear. How frequently does this problem reproduce? Always What is the impact to the user, and is there a workaround? If so, what is it? Re-insert the headset or close the laptop lid and then open it again can be repaired. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 03:21:01 +00:00
case 3:
/* detect error case */
dev_err(nau8825->dev, "detection error; disable mic function\n");
type = SND_JACK_HEADPHONE;
break;
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
}
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
/* Leaving HPOL/R grounded after jack insert by default. They will be
* ungrounded as part of the widget power up sequence at the beginning
* of playback to reduce pop.
*/
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
return type;
}
#define NAU8825_BUTTONS (SND_JACK_BTN_0 | SND_JACK_BTN_1 | \
SND_JACK_BTN_2 | SND_JACK_BTN_3)
static irqreturn_t nau8825_interrupt(int irq, void *data)
{
struct nau8825 *nau8825 = (struct nau8825 *)data;
struct regmap *regmap = nau8825->regmap;
int active_irq, clear_irq = 0, event = 0, event_mask = 0;
ASoC: nau8825: Fix jack detection across suspend Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power. Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-25 23:10:39 +00:00
if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) {
dev_err(nau8825->dev, "failed to read irq status\n");
return IRQ_NONE;
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) ==
NAU8825_JACK_EJECTION_DETECTED) {
nau8825_eject_jack(nau8825);
event_mask |= SND_JACK_HEADSET;
clear_irq = NAU8825_JACK_EJECTION_IRQ_MASK;
} else if (active_irq & NAU8825_KEY_SHORT_PRESS_IRQ) {
int key_status;
regmap_read(regmap, NAU8825_REG_INT_CLR_KEY_STATUS,
&key_status);
/* upper 8 bits of the register are for short pressed keys,
* lower 8 bits - for long pressed buttons
*/
nau8825->button_pressed = nau8825_button_decode(
key_status >> 8);
event |= nau8825->button_pressed;
event_mask |= NAU8825_BUTTONS;
clear_irq = NAU8825_KEY_SHORT_PRESS_IRQ;
} else if (active_irq & NAU8825_KEY_RELEASE_IRQ) {
event_mask = NAU8825_BUTTONS;
clear_irq = NAU8825_KEY_RELEASE_IRQ;
} else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) {
if (nau8825_is_jack_inserted(regmap)) {
event |= nau8825_jack_insert(nau8825);
ASoC: nau8825: disable crosstalk by default The driver makes the crosstalk funciton disabled by default which can simplify the codec function. The platform may not need this funciton and reduce the potential risk. Therefore, We change the property "nuvoton,crosstalk-bypass" to "nuvoton,crosstalk-enable". The crosstalk measurement is enabled if the property is set. Otherwise, it is disabled. Besides, add more condition in the entry point of the crosstalk sequence to disable the function completely. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-24 10:08:26 +00:00
if (nau8825->xtalk_enable && !nau8825->high_imped) {
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* Apply the cross talk suppression in the
* headset without high impedance.
*/
if (!nau8825->xtalk_protect) {
/* Raise protection for cross talk de-
* tection if no protection before.
* The driver has to cancel the pro-
* cess and restore changes if process
* is ongoing when ejection.
*/
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
int ret;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
nau8825->xtalk_protect = true;
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
ret = nau8825_sema_acquire(nau8825, 0);
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
if (ret)
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
nau8825->xtalk_protect = false;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
}
/* Startup cross talk detection process */
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
if (nau8825->xtalk_protect) {
nau8825->xtalk_state =
NAU8825_XTALK_PREPARE;
schedule_work(&nau8825->xtalk_work);
}
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
} else {
/* The cross talk suppression shouldn't apply
* in the headset with high impedance. Thus,
* relieve the protection raised before.
*/
if (nau8825->xtalk_protect) {
nau8825_sema_release(nau8825);
nau8825->xtalk_protect = false;
}
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
} else {
dev_warn(nau8825->dev, "Headset completion IRQ fired but no headset connected\n");
nau8825_eject_jack(nau8825);
}
event_mask |= SND_JACK_HEADSET;
clear_irq = NAU8825_HEADSET_COMPLETION_IRQ;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* Record the interruption report event for driver to report
* the event later. The jack report will delay until cross
* talk detection process is done.
*/
if (nau8825->xtalk_state == NAU8825_XTALK_PREPARE) {
nau8825->xtalk_event = event;
nau8825->xtalk_event_mask = event_mask;
}
} else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) {
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
/* crosstalk detection enable and process on going */
if (nau8825->xtalk_enable && nau8825->xtalk_protect)
ASoC: nau8825: disable crosstalk by default The driver makes the crosstalk funciton disabled by default which can simplify the codec function. The platform may not need this funciton and reduce the potential risk. Therefore, We change the property "nuvoton,crosstalk-bypass" to "nuvoton,crosstalk-enable". The crosstalk measurement is enabled if the property is set. Otherwise, it is disabled. Besides, add more condition in the entry point of the crosstalk sequence to disable the function completely. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-24 10:08:26 +00:00
schedule_work(&nau8825->xtalk_work);
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ;
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
} else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) ==
NAU8825_JACK_INSERTION_DETECTED) {
/* One more step to check GPIO status directly. Thus, the
* driver can confirm the real insertion interruption because
* the intrruption at manual mode has bypassed debounce
* circuit which can get rid of unstable status.
*/
if (nau8825_is_jack_inserted(regmap)) {
/* Turn off insertion interruption at manual mode */
regmap_update_bits(regmap,
NAU8825_REG_INTERRUPT_DIS_CTRL,
NAU8825_IRQ_INSERT_DIS,
NAU8825_IRQ_INSERT_DIS);
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
NAU8825_IRQ_INSERT_EN, NAU8825_IRQ_INSERT_EN);
/* Enable interruption for jack type detection at audo
* mode which can detect microphone and jack type.
*/
nau8825_setup_auto_irq(nau8825);
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
}
if (!clear_irq)
clear_irq = active_irq;
/* clears the rightmost interruption */
regmap_write(regmap, NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq);
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* Delay jack report until cross talk detection is done. It can avoid
* application to do playback preparation when cross talk detection
* process is still working. Otherwise, the resource like clock and
* power will be issued by them at the same time and conflict happens.
*/
if (event_mask && nau8825->xtalk_state == NAU8825_XTALK_DONE)
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
snd_soc_jack_report(nau8825->jack, event, event_mask);
return IRQ_HANDLED;
}
static void nau8825_setup_buttons(struct nau8825 *nau8825)
{
struct regmap *regmap = nau8825->regmap;
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_TRACKING_GAIN_MASK,
nau8825->sar_voltage << NAU8825_SAR_TRACKING_GAIN_SFT);
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_COMPARE_TIME_MASK,
nau8825->sar_compare_time << NAU8825_SAR_COMPARE_TIME_SFT);
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_SAMPLING_TIME_MASK,
nau8825->sar_sampling_time << NAU8825_SAR_SAMPLING_TIME_SFT);
regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL,
NAU8825_KEYDET_LEVELS_NR_MASK,
(nau8825->sar_threshold_num - 1) << NAU8825_KEYDET_LEVELS_NR_SFT);
regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL,
NAU8825_KEYDET_HYSTERESIS_MASK,
nau8825->sar_hysteresis << NAU8825_KEYDET_HYSTERESIS_SFT);
regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL,
NAU8825_KEYDET_SHORTKEY_DEBOUNCE_MASK,
nau8825->key_debounce << NAU8825_KEYDET_SHORTKEY_DEBOUNCE_SFT);
regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_1,
(nau8825->sar_threshold[0] << 8) | nau8825->sar_threshold[1]);
regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_2,
(nau8825->sar_threshold[2] << 8) | nau8825->sar_threshold[3]);
regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_3,
(nau8825->sar_threshold[4] << 8) | nau8825->sar_threshold[5]);
regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_4,
(nau8825->sar_threshold[6] << 8) | nau8825->sar_threshold[7]);
/* Enable short press and release interruptions */
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
NAU8825_IRQ_KEY_SHORT_PRESS_EN | NAU8825_IRQ_KEY_RELEASE_EN,
0);
}
static void nau8825_init_regs(struct nau8825 *nau8825)
{
struct regmap *regmap = nau8825->regmap;
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
/* Latch IIC LSB value */
regmap_write(regmap, NAU8825_REG_IIC_ADDR_SET, 0x0001);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
/* Enable Bias/Vmid */
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_VMID, NAU8825_BIAS_VMID);
regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
NAU8825_GLOBAL_BIAS_EN, NAU8825_GLOBAL_BIAS_EN);
/* VMID Tieoff */
regmap_update_bits(regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_VMID_SEL_MASK,
nau8825->vref_impedance << NAU8825_BIAS_VMID_SEL_SFT);
/* Disable Boost Driver, Automatic Short circuit protection enable */
regmap_update_bits(regmap, NAU8825_REG_BOOST,
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS |
NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN,
NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS |
NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL,
NAU8825_JKDET_OUTPUT_EN,
nau8825->jkdet_enable ? 0 : NAU8825_JKDET_OUTPUT_EN);
regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL,
NAU8825_JKDET_PULL_EN,
nau8825->jkdet_pull_enable ? 0 : NAU8825_JKDET_PULL_EN);
regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL,
NAU8825_JKDET_PULL_UP,
nau8825->jkdet_pull_up ? NAU8825_JKDET_PULL_UP : 0);
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
NAU8825_JACK_POLARITY,
/* jkdet_polarity - 1 is for active-low */
nau8825->jkdet_polarity ? 0 : NAU8825_JACK_POLARITY);
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
NAU8825_JACK_INSERT_DEBOUNCE_MASK,
nau8825->jack_insert_debounce << NAU8825_JACK_INSERT_DEBOUNCE_SFT);
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
NAU8825_JACK_EJECT_DEBOUNCE_MASK,
nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
ASoC: nau8825: fix fake interruption when booting There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Tested-by: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-10 03:40:40 +00:00
/* Pull up IRQ pin */
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN,
NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
/* Mask unneeded IRQs: 1 - disable, 0 - enable */
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_VOLTAGE_MASK, nau8825->micbias_voltage);
if (nau8825->sar_threshold_num)
nau8825_setup_buttons(nau8825);
/* Default oversampling/decimations settings are unusable
* (audible hiss). Set it to something better.
*/
regmap_update_bits(regmap, NAU8825_REG_ADC_RATE,
ASoC: nau8825: disable sinc filter for high THD of ADC This bit will enable 4th order SINC filter. =1, filter will enable; but it consumes higher power. =0, the sinc filter is disable, and it should always keep 0 value to get high THD. Therefor, disable the filter when codec initiation for better performance when recording. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-02 01:48:58 +00:00
NAU8825_ADC_SYNC_DOWN_MASK | NAU8825_ADC_SINC4_EN,
NAU8825_ADC_SYNC_DOWN_64);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1,
ASoC: nau8825: AD/DA over sampling rate configuration Over Sampling Rate (OSR) is defined as CLK_ADC frequency divided by the audio sample rate (Fs). OSR = CLK_ADC / FS The available OSRs are 32, 64, 128 or 256. Note that the OSR and Fs values must be selected such that the maximum frequency of CLK_ADC is less than 6.144 MHz. It is recommended to match the relationship between OSR and clock SRC according to following Table. ADC_RATE: 00(OSR=32) | CLK_ADC_SRC: 11(CODEC 1/8) ADC_RATE: 01(OSR=64) | CLK_ADC_SRC: 10(CODEC1/4) ADC_RATE: 10(OSR=128) | CLK_ADC_SRC: 01(CODEC 1/2) ADC_RATE: 11(OSR=256) | CLK_ADC_SRC: 00(CODEC CLK) The over sampling rate about DAC follows the same rule with ADCs. The driver changes the OSR to 64 value when initiation for better FLL performance and applies the dynamic SRC change by different OSR. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 03:34:42 +00:00
NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_64);
ASoC: nau8825: fix issue that pop noise when start playback Reduce pop noise in power up and down sequence when playback. The DAPM widgets graph is reconstructed to ensure the register write sequence at playback matches exactly to the v5 clickless sequence provided by Nuvoton. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12 01:33:58 +00:00
/* Disable DACR/L power */
regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
/* Enable TESTDAC. This sets the analog DAC inputs to a '0' input
* signal to avoid any glitches due to power up transients in both
* the analog and digital DAC circuit.
*/
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
/* CICCLP off */
regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1,
NAU8825_DAC_CLIP_OFF, NAU8825_DAC_CLIP_OFF);
/* Class AB bias current to 2x, DAC Capacitor enable MSB/LSB */
regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_2,
NAU8825_HP_NON_CLASSG_CURRENT_2xADJ |
NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB,
NAU8825_HP_NON_CLASSG_CURRENT_2xADJ |
NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB);
/* Class G timer 64ms */
regmap_update_bits(regmap, NAU8825_REG_CLASSG_CTRL,
NAU8825_CLASSG_TIMER_MASK,
0x20 << NAU8825_CLASSG_TIMER_SFT);
/* DAC clock delay 2ns, VREF */
regmap_update_bits(regmap, NAU8825_REG_RDAC,
NAU8825_RDAC_CLK_DELAY_MASK | NAU8825_RDAC_VREF_MASK,
(0x2 << NAU8825_RDAC_CLK_DELAY_SFT) |
(0x3 << NAU8825_RDAC_VREF_SFT));
ASoC: nau8825: assign DAC Ch to match headset L/R The default value of DAC channel select is reverse in codec. For normal usage, switch the channel select when codec bootup. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-30 06:57:11 +00:00
/* Config L/R channel */
regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL,
NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_L);
regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL,
NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_R);
ASoC: nau8825: Disable short Frame Sync detection logic If the short Frame Sync detection logic enabled, the logic will check the short frame sync threshold. If frame sync is less than the setting; for example, frame sync less than 252 MCLK, the short frame sync signal is flagged, digital filter temporary mute and skip that data. If the system was intended for sampling rate change which could create temporary short frame sync and not enough MIPS to run the digital filter. But the situation doesn't happen in ALSA architecure. Thus the Frame Sync is always stable, then no require to do the detection. Therefore, the dirver disables the function for better performance. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:34:12 +00:00
/* Disable short Frame Sync detection logic */
regmap_update_bits(regmap, NAU8825_REG_LEFT_TIME_SLOT,
NAU8825_DIS_FS_SHORT_DET, NAU8825_DIS_FS_SHORT_DET);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
}
static const struct regmap_config nau8825_regmap_config = {
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
.val_bits = NAU8825_REG_DATA_LEN,
.reg_bits = NAU8825_REG_ADDR_LEN,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
.max_register = NAU8825_REG_MAX,
.readable_reg = nau8825_readable_reg,
.writeable_reg = nau8825_writeable_reg,
.volatile_reg = nau8825_volatile_reg,
.cache_type = REGCACHE_RBTREE,
.reg_defaults = nau8825_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(nau8825_reg_defaults),
};
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
static int nau8825_component_probe(struct snd_soc_component *component)
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
nau8825->dapm = dapm;
return 0;
}
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
static void nau8825_component_remove(struct snd_soc_component *component)
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* Cancel and reset cross tak suppresstion detection funciton */
nau8825_xtalk_cancel(nau8825);
}
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
/**
* nau8825_calc_fll_param - Calculate FLL parameters.
* @fll_in: external clock provided to codec.
* @fs: sampling rate.
* @fll_param: Pointer to structure of FLL parameters.
*
* Calculate FLL parameters to configure codec.
*
* Returns 0 for success or negative error code.
*/
static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs,
struct nau8825_fll *fll_param)
{
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
u64 fvco, fvco_max;
unsigned int fref, i, fvco_sel;
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
/* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing
* freq_in by 1, 2, 4, or 8 using FLL pre-scalar.
* FREF = freq_in / NAU8825_FLL_REF_DIV_MASK
*/
for (i = 0; i < ARRAY_SIZE(fll_pre_scalar); i++) {
fref = fll_in / fll_pre_scalar[i].param;
if (fref <= NAU_FREF_MAX)
break;
}
if (i == ARRAY_SIZE(fll_pre_scalar))
return -EINVAL;
fll_param->clk_ref_div = fll_pre_scalar[i].val;
/* Choose the FLL ratio based on FREF */
for (i = 0; i < ARRAY_SIZE(fll_ratio); i++) {
if (fref >= fll_ratio[i].param)
break;
}
if (i == ARRAY_SIZE(fll_ratio))
return -EINVAL;
fll_param->ratio = fll_ratio[i].val;
/* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs.
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
* FDCO must be within the 90MHz - 124MHz or the FFL cannot be
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
* guaranteed across the full range of operation.
* FDCO = freq_out * 2 * mclk_src_scaling
*/
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
fvco_max = 0;
fvco_sel = ARRAY_SIZE(mclk_src_scaling);
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) {
ASoC: nau8825: use 64-bit arithmetic instead of 32-bit Add suffix ULL to constant 256 in order to give the compiler complete information about the proper arithmetic to use. Notice that such constant is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: 256 * fs * 2 * mclk_src_scaling[i].param Addresses-Coverity-ID: 1339616 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 14:28:28 +00:00
fvco = 256ULL * fs * 2 * mclk_src_scaling[i].param;
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX &&
fvco_max < fvco) {
fvco_max = fvco;
fvco_sel = i;
}
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
}
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel)
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
return -EINVAL;
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
fll_param->mclk_src = mclk_src_scaling[fvco_sel].val;
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
/* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional
* input based on FDCO, FREF and FLL ratio.
*/
ASoC: nau8825: fix bug in FLL parameter In the FLL parameter calculation, the FVCO should choose the maximum one. The patch is to fix the bug about the wrong FVCO chosen. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-09-13 03:56:03 +00:00
fvco = div_u64(fvco_max << 16, fref * fll_param->ratio);
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
fll_param->fll_int = (fvco >> 16) & 0x3FF;
fll_param->fll_frac = fvco & 0xFFFF;
return 0;
}
static void nau8825_fll_apply(struct nau8825 *nau8825,
struct nau8825_fll *fll_param)
{
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK,
NAU8825_CLK_SRC_MCLK | fll_param->mclk_src);
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
/* Make DSP operate at high speed for better performance. */
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1,
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
NAU8825_FLL_RATIO_MASK | NAU8825_ICTRL_LATCH_MASK,
fll_param->ratio | (0x6 << NAU8825_ICTRL_LATCH_SFT));
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
/* FLL 16-bit fractional input */
regmap_write(nau8825->regmap, NAU8825_REG_FLL2, fll_param->fll_frac);
/* FLL 10-bit integer input */
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL3,
NAU8825_FLL_INTEGER_MASK, fll_param->fll_int);
/* FLL pre-scaler */
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL4,
ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL The clk_ref_div is not configured in the correct position of the register. The patch fixes that clk_ref_div, Pre-Scalar, is assigned the wrong value. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-20 04:03:09 +00:00
NAU8825_FLL_REF_DIV_MASK,
fll_param->clk_ref_div << NAU8825_FLL_REF_DIV_SFT);
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
/* select divided VCO input */
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF);
/* Disable free-running mode */
regmap_update_bits(nau8825->regmap,
NAU8825_REG_FLL6, NAU8825_DCO_EN, 0);
if (fll_param->fll_frac) {
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
/* set FLL loop filter enable and cutoff frequency at 500Khz */
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
NAU8825_FLL_FTR_SW_MASK,
NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
NAU8825_FLL_FTR_SW_FILTER);
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6,
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
NAU8825_SDM_EN | NAU8825_CUTOFF500,
NAU8825_SDM_EN | NAU8825_CUTOFF500);
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
} else {
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
/* disable FLL loop filter and cutoff frequency */
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
NAU8825_FLL_FTR_SW_MASK, NAU8825_FLL_FTR_SW_ACCU);
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6,
NAU8825_SDM_EN | NAU8825_CUTOFF500, 0);
ASoC: nau8825: improve FLL function for better performance In FLL calculation, increase VCO/DCO frequency for better performance. Besides, have different register configuration according to fraction or not when apply FLL parameters. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:09:36 +00:00
}
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
}
/* freq_out must be 256*Fs in order to achieve the best performance */
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
static int nau8825_set_pll(struct snd_soc_component *component, int pll_id, int source,
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
unsigned int freq_in, unsigned int freq_out)
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
struct nau8825_fll fll_param;
int ret, fs;
fs = freq_out / 256;
ret = nau8825_calc_fll_param(freq_in, fs, &fll_param);
if (ret < 0) {
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
dev_err(component->dev, "Unsupported input clock %d\n", freq_in);
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
return ret;
}
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
dev_dbg(component->dev, "mclk_src=%x ratio=%x fll_frac=%x fll_int=%x clk_ref_div=%x\n",
ASoC: nau8825: Add FLL configuration snd_soc_codec_driver.set_pll is implemented to configure the FLL. The codec internal SYSCLK can be from either the MCLK pin directly, or the FLL. This is configured by snd_soc_codec_driver.set_pll. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:05 +00:00
fll_param.mclk_src, fll_param.ratio, fll_param.fll_frac,
fll_param.fll_int, fll_param.clk_ref_div);
nau8825_fll_apply(nau8825, &fll_param);
mdelay(2);
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
return 0;
}
ASoC: nau8825: support different clock source for FLL function Extend FLL clock source selection. The source can be from MCLK, BCLK or FS. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:08:21 +00:00
static int nau8825_mclk_prepare(struct nau8825 *nau8825, unsigned int freq)
{
int ret = 0;
nau8825->mclk = devm_clk_get(nau8825->dev, "mclk");
if (IS_ERR(nau8825->mclk)) {
dev_info(nau8825->dev, "No 'mclk' clock found, assume MCLK is managed externally");
return 0;
}
if (!nau8825->mclk_freq) {
ret = clk_prepare_enable(nau8825->mclk);
if (ret) {
dev_err(nau8825->dev, "Unable to prepare codec mclk\n");
return ret;
}
}
if (nau8825->mclk_freq != freq) {
freq = clk_round_rate(nau8825->mclk, freq);
ret = clk_set_rate(nau8825->mclk, freq);
if (ret) {
dev_err(nau8825->dev, "Unable to set mclk rate\n");
return ret;
}
nau8825->mclk_freq = freq;
}
return 0;
}
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
static void nau8825_configure_mclk_as_sysclk(struct regmap *regmap)
{
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_MCLK);
regmap_update_bits(regmap, NAU8825_REG_FLL6,
NAU8825_DCO_EN, 0);
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
/* Make DSP operate as default setting for power saving. */
regmap_update_bits(regmap, NAU8825_REG_FLL1,
NAU8825_ICTRL_LATCH_MASK, 0);
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id,
unsigned int freq)
{
struct regmap *regmap = nau8825->regmap;
int ret;
switch (clk_id) {
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
case NAU8825_CLK_DIS:
/* Clock provided externally and disable internal VCO clock */
nau8825_configure_mclk_as_sysclk(regmap);
if (nau8825->mclk_freq) {
clk_disable_unprepare(nau8825->mclk);
nau8825->mclk_freq = 0;
}
break;
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
case NAU8825_CLK_MCLK:
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Acquire the semaphore to synchronize the playback and
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
* interrupt handler. In order to avoid the playback inter-
* fered by cross talk process, the driver make the playback
* preparation halted until cross talk process finish.
*/
ASoC: nau8825: lock longer to avoid playback pop upon resume There is an issue about pop noise in NAU88L25 as follows. Issue 54078: Chell_headphone pop back from S3 (1)Play directly to hw, bypassing CRAS: sox -b 16 -n -t alsa hw:0,0 synth sine 200 sine 200 (2)Close lid or powerd_dbus_suspend, then press a key to resume. (3)no audio after resume (4)Audio will be back after close then reopen the pcm device. After verification, we find one defect is that semaphone lock is not long enough and expired. In this situation, the playback comes back early but pauses a while to wait for the crosstalk detection done. But the detection spends too much time and lock time is up. Therefore, the playback and jack detection sequence interfere to each other. That breaks sequence and makes noise. The driver extends the lock time for the issue. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-29 02:05:16 +00:00
nau8825_sema_acquire(nau8825, 3 * HZ);
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
nau8825_configure_mclk_as_sysclk(regmap);
ASoC: nau8825: reduce standby power consumption Decrease internal clock frequency for power saving when standby. But clock divider needs restore when MCLK as system clock in playback. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-22 03:57:05 +00:00
/* MCLK not changed by clock tree */
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_MCLK_SRC_MASK, 0);
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Release the semaphore. */
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
nau8825_sema_release(nau8825);
ASoC: nau8825: support different clock source for FLL function Extend FLL clock source selection. The source can be from MCLK, BCLK or FS. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:08:21 +00:00
ret = nau8825_mclk_prepare(nau8825, freq);
if (ret)
return ret;
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
break;
case NAU8825_CLK_INTERNAL:
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
if (nau8825_is_jack_inserted(nau8825->regmap)) {
regmap_update_bits(regmap, NAU8825_REG_FLL6,
NAU8825_DCO_EN, NAU8825_DCO_EN);
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
/* Decrease the VCO frequency and make DSP operate
* as default setting for power saving.
*/
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_MCLK_SRC_MASK, 0xf);
regmap_update_bits(regmap, NAU8825_REG_FLL1,
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
NAU8825_ICTRL_LATCH_MASK |
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
NAU8825_FLL_RATIO_MASK, 0x10);
regmap_update_bits(regmap, NAU8825_REG_FLL6,
NAU8825_SDM_EN, NAU8825_SDM_EN);
} else {
/* The clock turns off intentionally for power saving
* when no headset connected.
*/
nau8825_configure_mclk_as_sysclk(regmap);
dev_warn(nau8825->dev, "Disable clock for power saving when no headset connected\n");
}
ASoC: nau8825: support different clock source for FLL function Extend FLL clock source selection. The source can be from MCLK, BCLK or FS. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:08:21 +00:00
if (nau8825->mclk_freq) {
clk_disable_unprepare(nau8825->mclk);
nau8825->mclk_freq = 0;
}
break;
case NAU8825_CLK_FLL_MCLK:
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Acquire the semaphore to synchronize the playback and
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
* interrupt handler. In order to avoid the playback inter-
* fered by cross talk process, the driver make the playback
* preparation halted until cross talk process finish.
*/
ASoC: nau8825: lock longer to avoid playback pop upon resume There is an issue about pop noise in NAU88L25 as follows. Issue 54078: Chell_headphone pop back from S3 (1)Play directly to hw, bypassing CRAS: sox -b 16 -n -t alsa hw:0,0 synth sine 200 sine 200 (2)Close lid or powerd_dbus_suspend, then press a key to resume. (3)no audio after resume (4)Audio will be back after close then reopen the pcm device. After verification, we find one defect is that semaphone lock is not long enough and expired. In this situation, the playback comes back early but pauses a while to wait for the crosstalk detection done. But the detection spends too much time and lock time is up. Therefore, the playback and jack detection sequence interfere to each other. That breaks sequence and makes noise. The driver extends the lock time for the issue. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-29 02:05:16 +00:00
nau8825_sema_acquire(nau8825, 3 * HZ);
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
/* Higher FLL reference input frequency can only set lower
* gain error, such as 0000 for input reference from MCLK
* 12.288Mhz.
*/
ASoC: nau8825: support different clock source for FLL function Extend FLL clock source selection. The source can be from MCLK, BCLK or FS. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:08:21 +00:00
regmap_update_bits(regmap, NAU8825_REG_FLL3,
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK,
NAU8825_FLL_CLK_SRC_MCLK | 0);
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Release the semaphore. */
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
nau8825_sema_release(nau8825);
ASoC: nau8825: support different clock source for FLL function Extend FLL clock source selection. The source can be from MCLK, BCLK or FS. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:08:21 +00:00
ret = nau8825_mclk_prepare(nau8825, freq);
if (ret)
return ret;
break;
case NAU8825_CLK_FLL_BLK:
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Acquire the semaphore to synchronize the playback and
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
* interrupt handler. In order to avoid the playback inter-
* fered by cross talk process, the driver make the playback
* preparation halted until cross talk process finish.
*/
ASoC: nau8825: lock longer to avoid playback pop upon resume There is an issue about pop noise in NAU88L25 as follows. Issue 54078: Chell_headphone pop back from S3 (1)Play directly to hw, bypassing CRAS: sox -b 16 -n -t alsa hw:0,0 synth sine 200 sine 200 (2)Close lid or powerd_dbus_suspend, then press a key to resume. (3)no audio after resume (4)Audio will be back after close then reopen the pcm device. After verification, we find one defect is that semaphone lock is not long enough and expired. In this situation, the playback comes back early but pauses a while to wait for the crosstalk detection done. But the detection spends too much time and lock time is up. Therefore, the playback and jack detection sequence interfere to each other. That breaks sequence and makes noise. The driver extends the lock time for the issue. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-29 02:05:16 +00:00
nau8825_sema_acquire(nau8825, 3 * HZ);
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
/* If FLL reference input is from low frequency source,
* higher error gain can apply such as 0xf which has
* the most sensitive gain error correction threshold,
* Therefore, FLL has the most accurate DCO to
* target frequency.
*/
ASoC: nau8825: support different clock source for FLL function Extend FLL clock source selection. The source can be from MCLK, BCLK or FS. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:08:21 +00:00
regmap_update_bits(regmap, NAU8825_REG_FLL3,
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK,
NAU8825_FLL_CLK_SRC_BLK |
(0xf << NAU8825_GAIN_ERR_SFT));
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Release the semaphore. */
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
nau8825_sema_release(nau8825);
ASoC: nau8825: support different clock source for FLL function Extend FLL clock source selection. The source can be from MCLK, BCLK or FS. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:08:21 +00:00
if (nau8825->mclk_freq) {
clk_disable_unprepare(nau8825->mclk);
nau8825->mclk_freq = 0;
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
ASoC: nau8825: support different clock source for FLL function Extend FLL clock source selection. The source can be from MCLK, BCLK or FS. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:08:21 +00:00
break;
case NAU8825_CLK_FLL_FS:
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Acquire the semaphore to synchronize the playback and
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
* interrupt handler. In order to avoid the playback inter-
* fered by cross talk process, the driver make the playback
* preparation halted until cross talk process finish.
*/
ASoC: nau8825: lock longer to avoid playback pop upon resume There is an issue about pop noise in NAU88L25 as follows. Issue 54078: Chell_headphone pop back from S3 (1)Play directly to hw, bypassing CRAS: sox -b 16 -n -t alsa hw:0,0 synth sine 200 sine 200 (2)Close lid or powerd_dbus_suspend, then press a key to resume. (3)no audio after resume (4)Audio will be back after close then reopen the pcm device. After verification, we find one defect is that semaphone lock is not long enough and expired. In this situation, the playback comes back early but pauses a while to wait for the crosstalk detection done. But the detection spends too much time and lock time is up. Therefore, the playback and jack detection sequence interfere to each other. That breaks sequence and makes noise. The driver extends the lock time for the issue. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-29 02:05:16 +00:00
nau8825_sema_acquire(nau8825, 3 * HZ);
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
/* If FLL reference input is from low frequency source,
* higher error gain can apply such as 0xf which has
* the most sensitive gain error correction threshold,
* Therefore, FLL has the most accurate DCO to
* target frequency.
*/
ASoC: nau8825: support different clock source for FLL function Extend FLL clock source selection. The source can be from MCLK, BCLK or FS. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-15 04:08:21 +00:00
regmap_update_bits(regmap, NAU8825_REG_FLL3,
ASoC: nau8825: FLL parameters finetune The driver fine-tune some parameters to improve FLL performance. Those items have description as follow. (1)ICTRL_LATCH: FLL DSP speed capability control When FLL running at high frequency with long decimal number, DSP needs to operate at high speed. FLL DSP can optimize between performance and power consumption by ICTRL_LATCH.(111 has highest power consumption.) The default setting can be used to reduce power. (2)CUTOFF500: loop filter cutoff frequency at 500Khz It will give the best FLL performance but highest power consumption to enable the cutoff frequency. FLL Loop Filter enable to reduce FLL output noise, especially,(DCO frequency)/(FLL input reference frequency) is not a integer. (3)GAIN_ERR: FLL gain error correction threshold setting The threshold is comparison between DCO and target frequency. The value 1111 has the most sensitive threshold, that is, 1111 can have the most accurate DCO to target frequency. However, the gain error setting conditionally and inversely depends on FLL input reference clock rate. Higher FLL reference input frequency can only set lower gain error, such as 0000 for input reference from MCLK=12.288Mhz. On the other side, if FLL reference input is from Frame Sync, 48KHz, higher error gain can apply such as 1111. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11 04:16:29 +00:00
NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK,
NAU8825_FLL_CLK_SRC_FS |
(0xf << NAU8825_GAIN_ERR_SFT));
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Release the semaphore. */
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
nau8825_sema_release(nau8825);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
if (nau8825->mclk_freq) {
clk_disable_unprepare(nau8825->mclk);
nau8825->mclk_freq = 0;
}
break;
default:
dev_err(nau8825->dev, "Invalid clock id (%d)\n", clk_id);
return -EINVAL;
}
dev_dbg(nau8825->dev, "Sysclk is %dHz and clock id is %d\n", freq,
clk_id);
return 0;
}
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
static int nau8825_set_sysclk(struct snd_soc_component *component, int clk_id,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
int source, unsigned int freq, int dir)
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
return nau8825_configure_sysclk(nau8825, clk_id, freq);
}
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
static int nau8825_resume_setup(struct nau8825 *nau8825)
{
struct regmap *regmap = nau8825->regmap;
/* Close clock when jack type detection at manual mode */
nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0);
/* Clear all interruption status */
nau8825_int_status_clear_all(regmap);
/* Enable both insertion and ejection interruptions, and then
* bypass de-bounce circuit.
*/
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN |
NAU8825_IRQ_EJECT_EN | NAU8825_IRQ_INSERT_EN,
NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN);
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS);
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL,
NAU8825_IRQ_INSERT_DIS | NAU8825_IRQ_EJECT_DIS, 0);
return 0;
}
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
static int nau8825_set_bias_level(struct snd_soc_component *component,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
enum snd_soc_bias_level level)
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
int ret;
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
if (nau8825->mclk_freq) {
ret = clk_prepare_enable(nau8825->mclk);
if (ret) {
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
dev_err(nau8825->dev, "Unable to prepare component mclk\n");
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
return ret;
}
}
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
/* Setup codec configuration after resume */
nau8825_resume_setup(nau8825);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
}
break;
case SND_SOC_BIAS_OFF:
ASoC: nau8825: fix jack type detection issue after resume Fix the issue that mic type detection error after resume. The microphone type detection procedure will recognize testing signal on JKSLV pin, but before the procedure, JKSLV already had supply voltage, that results in the failure. Therefore, the patch turns off the power and reset the jack type configuration before suspend. Then redo the jack detection procedure after resume. The patch help to fix the issue as follows: Google issue 37973093: CTIA/OMTP jack type detection failure after resume Reported Issue Chrome OS Version : ChromeOS R59-9460.13.0 Type of hardware : DVT sample What steps will reproduce the problem? (1 Play a music (2 Insert a headphones (3 Close laptop lid 3 sec then open it What is the expected output? The music is normal in the headphones. What do you see instead? Singer voice in the music is not clear. How frequently does this problem reproduce? Always What is the impact to the user, and is there a workaround? If so, what is it? Re-insert the headset or close the laptop lid and then open it again can be repaired. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 03:21:01 +00:00
/* Reset the configuration of jack type for detection */
/* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */
regmap_update_bits(nau8825->regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0);
/* ground HPL/HPR, MICGRND1/2 */
regmap_update_bits(nau8825->regmap,
NAU8825_REG_HSD_CTRL, 0xf, 0xf);
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
/* Cancel and reset cross talk detection funciton */
nau8825_xtalk_cancel(nau8825);
ASoC: nau8825: non-clock jack detection for power saving at standby The driver changes jack type detection interruption to non-clock archi- tecture for less 1mW power saving. The architecture is called manual mode jack detection. It has no hardware debounce, no jack type detection, but only detecting jack insertion. After jack insertion, the driver will switch to auto mode jack detection with internal clock which can detect microphone, jack type and do hardware debounce. The manual architecture has these main changes including codec initiation, interruption, clock control, and power management. When codec initiation or system resume, the clock is closed as jack insertion detection at man- ual mode, and bypass debounce circuit. These configurations move to resume setup function when setup bias level after resume. When jack insertion detection happens, the manual mode turns off and make configuration about jack type detection interruption at auto mode in auto irq setup function which can detect microphone and jack type. The inter- ruption will switch to manual mode again with clock free until jack ejec- tion happens. The system clock configuration adds clock disable option which can disable internal VCO clock. Before the system clock change, there is an restric- tion added to make sure clock disabled and not config any clock when no headset connected. In power management, we involve the solution about races and jack detec- tion in resume from Ben Zhang in the following patch and list his comment. [PATCH] ASoC: nau8825: Fix jack detection across suspend "Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power." "Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly." Change SAR widget to supply type which can prevent the codec keeping at SND_SOC_BIAS_ON during suspend. The codec suspend function can just invoke normally. Before the system suspends, the driver turns off all interruptions. Keep the interruption quiet before resume setup completes. The ADC channel will be disabled which is needed for interruptions at audo mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23 02:25:40 +00:00
/* Turn off all interruptions before system shutdown. Keep the
* interruption quiet before resume setup completes.
*/
regmap_write(nau8825->regmap,
NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff);
/* Disable ADC needed for interruptions at audo mode */
regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_ADC, 0);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
if (nau8825->mclk_freq)
clk_disable_unprepare(nau8825->mclk);
break;
}
return 0;
}
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
static int __maybe_unused nau8825_suspend(struct snd_soc_component *component)
ASoC: nau8825: Fix jack detection across suspend Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power. Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-25 23:10:39 +00:00
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: Fix jack detection across suspend Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power. Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-25 23:10:39 +00:00
disable_irq(nau8825->irq);
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
ASoC: nau8825: fix jack type detection issue after resume Fix the issue that mic type detection error after resume. The microphone type detection procedure will recognize testing signal on JKSLV pin, but before the procedure, JKSLV already had supply voltage, that results in the failure. Therefore, the patch turns off the power and reset the jack type configuration before suspend. Then redo the jack detection procedure after resume. The patch help to fix the issue as follows: Google issue 37973093: CTIA/OMTP jack type detection failure after resume Reported Issue Chrome OS Version : ChromeOS R59-9460.13.0 Type of hardware : DVT sample What steps will reproduce the problem? (1 Play a music (2 Insert a headphones (3 Close laptop lid 3 sec then open it What is the expected output? The music is normal in the headphones. What do you see instead? Singer voice in the music is not clear. How frequently does this problem reproduce? Always What is the impact to the user, and is there a workaround? If so, what is it? Re-insert the headset or close the laptop lid and then open it again can be repaired. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 03:21:01 +00:00
/* Power down codec power; don't suppoet button wakeup */
snd_soc_dapm_disable_pin(nau8825->dapm, "SAR");
snd_soc_dapm_disable_pin(nau8825->dapm, "MICBIAS");
snd_soc_dapm_sync(nau8825->dapm);
ASoC: nau8825: Fix jack detection across suspend Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power. Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-25 23:10:39 +00:00
regcache_cache_only(nau8825->regmap, true);
regcache_mark_dirty(nau8825->regmap);
return 0;
}
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
static int __maybe_unused nau8825_resume(struct snd_soc_component *component)
ASoC: nau8825: Fix jack detection across suspend Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power. Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-25 23:10:39 +00:00
{
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
int ret;
ASoC: nau8825: Fix jack detection across suspend Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power. Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-25 23:10:39 +00:00
regcache_cache_only(nau8825->regmap, false);
regcache_sync(nau8825->regmap);
ASoC: nau8825: fix bug in playback when suspend In chromium, the following steps will make codec function fail. \1. plug in headphones, Play music \2. run "powerd_dbus_suspend" \3. resume from S3 After resume, the jack detection will restart and make configuration for the headset. Meanwhile, the playback prepares and starts to work. The two sequences will conflict and make wrong register configuration. Originally, the driver adds protection for the case when it finds the playback is active. But the "powerd_dbus_suspend" command will close the pcm stream before suspend. Therefore, the driver can't detect the playback after resume, and the protection not works. For the issue, the driver raises protection every time after resume. The protection will release after jack detection and configuration completes, and then the playback just will goes on. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:06 +00:00
nau8825->xtalk_protect = true;
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
ret = nau8825_sema_acquire(nau8825, 0);
ASoC: nau8825: improve semaphore control After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:50 +00:00
if (ret)
ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-04 08:52:07 +00:00
nau8825->xtalk_protect = false;
ASoC: nau8825: Fix jack detection across suspend Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power. Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-25 23:10:39 +00:00
enable_irq(nau8825->irq);
return 0;
}
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
static const struct snd_soc_component_driver nau8825_component_driver = {
.probe = nau8825_component_probe,
.remove = nau8825_component_remove,
.set_sysclk = nau8825_set_sysclk,
.set_pll = nau8825_set_pll,
.set_bias_level = nau8825_set_bias_level,
.suspend = nau8825_suspend,
.resume = nau8825_resume,
.controls = nau8825_controls,
.num_controls = ARRAY_SIZE(nau8825_controls),
.dapm_widgets = nau8825_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(nau8825_dapm_widgets),
.dapm_routes = nau8825_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(nau8825_dapm_routes),
.suspend_bias_off = 1,
.idle_bias_on = 1,
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
};
static void nau8825_reset_chip(struct regmap *regmap)
{
regmap_write(regmap, NAU8825_REG_RESET, 0x00);
regmap_write(regmap, NAU8825_REG_RESET, 0x00);
}
ASoC: nau8825: Show device properties The codec device properties are printed for debugging. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:06 +00:00
static void nau8825_print_device_properties(struct nau8825 *nau8825)
{
int i;
struct device *dev = nau8825->dev;
dev_dbg(dev, "jkdet-enable: %d\n", nau8825->jkdet_enable);
dev_dbg(dev, "jkdet-pull-enable: %d\n", nau8825->jkdet_pull_enable);
dev_dbg(dev, "jkdet-pull-up: %d\n", nau8825->jkdet_pull_up);
dev_dbg(dev, "jkdet-polarity: %d\n", nau8825->jkdet_polarity);
dev_dbg(dev, "micbias-voltage: %d\n", nau8825->micbias_voltage);
dev_dbg(dev, "vref-impedance: %d\n", nau8825->vref_impedance);
dev_dbg(dev, "sar-threshold-num: %d\n", nau8825->sar_threshold_num);
for (i = 0; i < nau8825->sar_threshold_num; i++)
dev_dbg(dev, "sar-threshold[%d]=%d\n", i,
nau8825->sar_threshold[i]);
dev_dbg(dev, "sar-hysteresis: %d\n", nau8825->sar_hysteresis);
dev_dbg(dev, "sar-voltage: %d\n", nau8825->sar_voltage);
dev_dbg(dev, "sar-compare-time: %d\n", nau8825->sar_compare_time);
dev_dbg(dev, "sar-sampling-time: %d\n", nau8825->sar_sampling_time);
dev_dbg(dev, "short-key-debounce: %d\n", nau8825->key_debounce);
dev_dbg(dev, "jack-insert-debounce: %d\n",
nau8825->jack_insert_debounce);
dev_dbg(dev, "jack-eject-debounce: %d\n",
nau8825->jack_eject_debounce);
ASoC: nau8825: disable crosstalk by default The driver makes the crosstalk funciton disabled by default which can simplify the codec function. The platform may not need this funciton and reduce the potential risk. Therefore, We change the property "nuvoton,crosstalk-bypass" to "nuvoton,crosstalk-enable". The crosstalk measurement is enabled if the property is set. Otherwise, it is disabled. Besides, add more condition in the entry point of the crosstalk sequence to disable the function completely. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-24 10:08:26 +00:00
dev_dbg(dev, "crosstalk-enable: %d\n",
nau8825->xtalk_enable);
ASoC: nau8825: Show device properties The codec device properties are printed for debugging. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:06 +00:00
}
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
static int nau8825_read_device_properties(struct device *dev,
struct nau8825 *nau8825) {
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
int ret;
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
nau8825->jkdet_enable = device_property_read_bool(dev,
"nuvoton,jkdet-enable");
nau8825->jkdet_pull_enable = device_property_read_bool(dev,
"nuvoton,jkdet-pull-enable");
nau8825->jkdet_pull_up = device_property_read_bool(dev,
"nuvoton,jkdet-pull-up");
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
ret = device_property_read_u32(dev, "nuvoton,jkdet-polarity",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->jkdet_polarity);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->jkdet_polarity = 1;
ret = device_property_read_u32(dev, "nuvoton,micbias-voltage",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->micbias_voltage);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->micbias_voltage = 6;
ret = device_property_read_u32(dev, "nuvoton,vref-impedance",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->vref_impedance);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->vref_impedance = 2;
ret = device_property_read_u32(dev, "nuvoton,sar-threshold-num",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->sar_threshold_num);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->sar_threshold_num = 4;
ret = device_property_read_u32_array(dev, "nuvoton,sar-threshold",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
nau8825->sar_threshold, nau8825->sar_threshold_num);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret) {
nau8825->sar_threshold[0] = 0x08;
nau8825->sar_threshold[1] = 0x12;
nau8825->sar_threshold[2] = 0x26;
nau8825->sar_threshold[3] = 0x73;
}
ret = device_property_read_u32(dev, "nuvoton,sar-hysteresis",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->sar_hysteresis);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->sar_hysteresis = 0;
ret = device_property_read_u32(dev, "nuvoton,sar-voltage",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->sar_voltage);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->sar_voltage = 6;
ret = device_property_read_u32(dev, "nuvoton,sar-compare-time",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->sar_compare_time);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->sar_compare_time = 1;
ret = device_property_read_u32(dev, "nuvoton,sar-sampling-time",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->sar_sampling_time);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->sar_sampling_time = 1;
ret = device_property_read_u32(dev, "nuvoton,short-key-debounce",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->key_debounce);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->key_debounce = 3;
ret = device_property_read_u32(dev, "nuvoton,jack-insert-debounce",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->jack_insert_debounce);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->jack_insert_debounce = 7;
ret = device_property_read_u32(dev, "nuvoton,jack-eject-debounce",
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825->jack_eject_debounce);
ASoC: nau8825: default value for property Assign default value for codec private data when property not given. If without those default value and property, the codec will work abnormally. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-22 02:41:51 +00:00
if (ret)
nau8825->jack_eject_debounce = 0;
ASoC: nau8825: disable crosstalk by default The driver makes the crosstalk funciton disabled by default which can simplify the codec function. The platform may not need this funciton and reduce the potential risk. Therefore, We change the property "nuvoton,crosstalk-bypass" to "nuvoton,crosstalk-enable". The crosstalk measurement is enabled if the property is set. Otherwise, it is disabled. Besides, add more condition in the entry point of the crosstalk sequence to disable the function completely. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-24 10:08:26 +00:00
nau8825->xtalk_enable = device_property_read_bool(dev,
"nuvoton,crosstalk-enable");
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
nau8825->mclk = devm_clk_get(dev, "mclk");
if (PTR_ERR(nau8825->mclk) == -EPROBE_DEFER) {
return -EPROBE_DEFER;
} else if (PTR_ERR(nau8825->mclk) == -ENOENT) {
/* The MCLK is managed externally or not used at all */
nau8825->mclk = NULL;
dev_info(dev, "No 'mclk' clock found, assume MCLK is managed externally");
} else if (IS_ERR(nau8825->mclk)) {
return -EINVAL;
}
return 0;
}
static int nau8825_setup_irq(struct nau8825 *nau8825)
{
int ret;
ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL,
nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"nau8825", nau8825);
if (ret) {
dev_err(nau8825->dev, "Cannot request irq %d (%d)\n",
nau8825->irq, ret);
return ret;
}
return 0;
}
static int nau8825_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct device *dev = &i2c->dev;
struct nau8825 *nau8825 = dev_get_platdata(&i2c->dev);
int ret, value;
if (!nau8825) {
nau8825 = devm_kzalloc(dev, sizeof(*nau8825), GFP_KERNEL);
if (!nau8825)
return -ENOMEM;
ret = nau8825_read_device_properties(dev, nau8825);
if (ret)
return ret;
}
i2c_set_clientdata(i2c, nau8825);
nau8825->regmap = devm_regmap_init_i2c(i2c, &nau8825_regmap_config);
if (IS_ERR(nau8825->regmap))
return PTR_ERR(nau8825->regmap);
nau8825->dev = dev;
nau8825->irq = i2c->irq;
ASoC: nau8825: correct typo of semaphore comment There are a lot of typo about semaphore in the comment. Correct it from semaphone to semaphore. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25 03:35:44 +00:00
/* Initiate parameters, semaphore and work queue which are needed in
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
* cross talk suppression measurment function.
*/
nau8825->xtalk_state = NAU8825_XTALK_DONE;
nau8825->xtalk_protect = false;
ASoC: nau8825: improve crosstalk measurement protection The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 02:01:37 +00:00
nau8825->xtalk_baktab_initialized = false;
ASoC: nau8825: cross talk suppression measurement function The cross talk measurement function can reduce cross talk across the JKTIP HPL) and JKR1(HPR) outputs which measures the cross talk signal level to determine what is the cross talk reduction gain. This system works by sending a 23Hz -24dBV sine wave into the headset output DAC and through the PGA. The output of the PGA is then connected to an internal current sense which measures the attenuated 23Hz signal and passing the output to an ADC which converts the measurement to a binary code. With two separated measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data can be separated read in IMM_RMS_L for HSR and HSL after each measurement. Thus, the measurement function has four states to complete whole sequence. (1)Prepare state : Prepare the resource for detection and transfer to HPR IMM stat to make JKR1(HPR) impedance measure. (2)HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer to HPL IMM state to make JKTIP(HPL) impedance measure. (3)HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and transfer to IMM state to determine suppression sidetone gain. (4)IMM state : Computes cross talk suppression sidetone gain with orignal and cross talk signal level. Apply this gain and then restore codec con- figuration. Then transfer to Done state for ending. In order to get the cross talk suppression sidetone gain, we need the function to compute log10 value and the result is round off to 3 decimal. This function takes reference to dvb-math. The source code locates as the following. "Linux/drivers/media/dvb-core/dvb_math.c" Then, the orignal and cross talk signal vlues need to be characterized. The sidetone value can be converted to decibel with the equation below. sidetone = 20 * log (original signal level / crosstalk signal level) Besides, the state machine for cross talk process needs interruptions to trigger worked. We have the RMS intrruption enabled with the internal VCO clock when headset connected. In the interrupt handler, the driver will judge the headset is high impedance or not. If yes, the cross talk supp- ression shouldn't apply and do nothing but relieve the protection raised before. Otherwise, apply the cross talk suppression in the headset and start the process. Because the process spends a lot of time, there is an resource race issue easily between the application and interruption. They will control codec power and clock concurrently. In one situaiton, the jack is inserted when playback, and then the application changes to headset device. The applica- tion prepares the playback and interrupt handler raises work for cross talk process together. For this case, the solution is that driver delays soc jack report until cross talk process completes. The mechanism can avoid application to do playback preparation before cross talk detection is still working. In another situaiton, the system suspends when playback. After resume, the system restarts playback, and meanwhile jack detection restarts. The play- back preparation and cross talk process triggered by interruptions happens concurrently. For the case, the driver provides the semaphone to syn- chronize the playback and interrupt handler. In order to avoid the play- back interfered by cross talk process, the driver make the playback prepa- ration halted until cross talk process finish. After codec resume, the driver finds the codec dai is active, and then the driver raises the pro- tection for cross talk function to avoid the playback recovers before cross talk process finish. The driver also provides cancel method to forcely cancel the cross talk task and restores the configuration to original status. Before the codec remove, ejection, or suspend, the driver is obliged to cancel the cross talk detection process. It can reduce the risk of failure when quickly and continually doing jack insertion and ejection. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07 02:29:27 +00:00
sema_init(&nau8825->xtalk_sem, 1);
INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
ASoC: nau8825: Show device properties The codec device properties are printed for debugging. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 23:49:06 +00:00
nau8825_print_device_properties(nau8825);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
nau8825_reset_chip(nau8825->regmap);
ret = regmap_read(nau8825->regmap, NAU8825_REG_I2C_DEVICE_ID, &value);
if (ret < 0) {
dev_err(dev, "Failed to read device id from the NAU8825: %d\n",
ret);
return ret;
}
if ((value & NAU8825_SOFTWARE_ID_MASK) !=
NAU8825_SOFTWARE_ID_NAU8825) {
dev_err(dev, "Not a NAU8825 chip\n");
return -ENODEV;
}
nau8825_init_regs(nau8825);
if (i2c->irq)
nau8825_setup_irq(nau8825);
ASoC: hdac_hdmi/nau8825/rt286/rt298/rt5663/da7219: replace codec to component Now we can replace Codec to Component. Let's do it. Because intal/rockchip boards are using multi-codecs in 1 driver, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: hdac_hdmi xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 nau8825 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt286 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt298 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5663 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 da7219 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 04:36:54 +00:00
return devm_snd_soc_register_component(&i2c->dev,
&nau8825_component_driver,
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
&nau8825_dai, 1);
}
static int nau8825_i2c_remove(struct i2c_client *client)
{
return 0;
}
static const struct i2c_device_id nau8825_i2c_ids[] = {
{ "nau8825", 0 },
{ }
};
ASoC: nau8825: Export I2C module alias information The I2C driver has an i2c_device_id array but that information isn't exported to the module using the MODULE_DEVICE_TABLE() macro. So the module autoloading won't work if the I2C device is registered using OF or legacy board files due missing alias information in the module. The issue was found using Kieran Bingham's coccinelle semantic patch: https://lkml.org/lkml/2016/5/10/520 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-17 16:00:09 +00:00
MODULE_DEVICE_TABLE(i2c, nau8825_i2c_ids);
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
#ifdef CONFIG_OF
static const struct of_device_id nau8825_of_ids[] = {
{ .compatible = "nuvoton,nau8825", },
{}
};
MODULE_DEVICE_TABLE(of, nau8825_of_ids);
#endif
ASoC: nau8825: add acpi match ID This patch adds the acpi match ID for nau8825 codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-07 21:33:57 +00:00
#ifdef CONFIG_ACPI
static const struct acpi_device_id nau8825_acpi_match[] = {
{ "10508825", 0 },
{},
};
MODULE_DEVICE_TABLE(acpi, nau8825_acpi_match);
#endif
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
static struct i2c_driver nau8825_driver = {
.driver = {
.name = "nau8825",
.of_match_table = of_match_ptr(nau8825_of_ids),
ASoC: nau8825: add acpi match ID This patch adds the acpi match ID for nau8825 codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-07 21:33:57 +00:00
.acpi_match_table = ACPI_PTR(nau8825_acpi_match),
ASoC: nau8825: Add driver for headset chip Nuvoton 8825 Sponsored-by: Google Chromium project Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 16:49:14 +00:00
},
.probe = nau8825_i2c_probe,
.remove = nau8825_i2c_remove,
.id_table = nau8825_i2c_ids,
};
module_i2c_driver(nau8825_driver);
MODULE_DESCRIPTION("ASoC nau8825 driver");
MODULE_AUTHOR("Anatol Pomozov <anatol@chromium.org>");
MODULE_LICENSE("GPL");
Reference in New Issue Copy Permalink