Files
linux/drivers/infiniband/sw/rxe/rxe_mr.c

636 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
/*
* Copyright (c) 2016 Mellanox Technologies Ltd. All rights reserved.
* Copyright (c) 2015 System Fabric Works, Inc. All rights reserved.
*/
#include "rxe.h"
#include "rxe_loc.h"
/* Return a random 8 bit key value that is
* different than the last_key. Set last_key to -1
* if this is the first key for an MR or MW
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
*/
u8 rxe_get_next_key(u32 last_key)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
u8 key;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
do {
get_random_bytes(&key, 1);
} while (key == last_key);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return key;
}
int mr_check_range(struct rxe_mr *mr, u64 iova, size_t length)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
switch (mr->type) {
case IB_MR_TYPE_DMA:
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return 0;
case IB_MR_TYPE_USER:
case IB_MR_TYPE_MEM_REG:
if (iova < mr->ibmr.iova || length > mr->ibmr.length ||
iova > mr->ibmr.iova + mr->ibmr.length - length)
return -EFAULT;
return 0;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
default:
pr_warn("%s: mr type (%d) not supported\n",
__func__, mr->type);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return -EFAULT;
}
}
#define IB_ACCESS_REMOTE (IB_ACCESS_REMOTE_READ \
| IB_ACCESS_REMOTE_WRITE \
| IB_ACCESS_REMOTE_ATOMIC)
static void rxe_mr_init(int access, struct rxe_mr *mr)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
u32 lkey = mr->elem.index << 8 | rxe_get_next_key(-1);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
u32 rkey = (access & IB_ACCESS_REMOTE) ? lkey : 0;
/* set ibmr->l/rkey and also copy into private l/rkey
* for user MRs these will always be the same
* for cases where caller 'owns' the key portion
* they may be different until REG_MR WQE is executed.
*/
mr->lkey = mr->ibmr.lkey = lkey;
mr->rkey = mr->ibmr.rkey = rkey;
mr->state = RXE_MR_STATE_INVALID;
mr->map_shift = ilog2(RXE_BUF_PER_MAP);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
static int rxe_mr_alloc(struct rxe_mr *mr, int num_buf)
{
int i;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
int num_map;
struct rxe_map **map = mr->map;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
num_map = (num_buf + RXE_BUF_PER_MAP - 1) / RXE_BUF_PER_MAP;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
mr->map = kmalloc_array(num_map, sizeof(*map), GFP_KERNEL);
if (!mr->map)
goto err1;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
for (i = 0; i < num_map; i++) {
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
mr->map[i] = kmalloc(sizeof(**map), GFP_KERNEL);
if (!mr->map[i])
goto err2;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
BUILD_BUG_ON(!is_power_of_2(RXE_BUF_PER_MAP));
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
mr->map_shift = ilog2(RXE_BUF_PER_MAP);
mr->map_mask = RXE_BUF_PER_MAP - 1;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
mr->num_buf = num_buf;
mr->num_map = num_map;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
mr->max_buf = num_map * RXE_BUF_PER_MAP;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return 0;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
err2:
for (i--; i >= 0; i--)
kfree(mr->map[i]);
kfree(mr->map);
err1:
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return -ENOMEM;
}
void rxe_mr_init_dma(int access, struct rxe_mr *mr)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
rxe_mr_init(access, mr);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
mr->access = access;
mr->state = RXE_MR_STATE_VALID;
mr->type = IB_MR_TYPE_DMA;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
int rxe_mr_init_user(struct rxe_dev *rxe, u64 start, u64 length, u64 iova,
int access, struct rxe_mr *mr)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
struct rxe_map **map;
struct rxe_phys_buf *buf = NULL;
struct ib_umem *umem;
struct sg_page_iter sg_iter;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
int num_buf;
void *vaddr;
int err;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
int i;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
umem = ib_umem_get(&rxe->ib_dev, start, length, access);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
if (IS_ERR(umem)) {
pr_warn("%s: Unable to pin memory region err = %d\n",
__func__, (int)PTR_ERR(umem));
err = PTR_ERR(umem);
goto err_out;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
num_buf = ib_umem_num_pages(umem);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
rxe_mr_init(access, mr);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
err = rxe_mr_alloc(mr, num_buf);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
if (err) {
pr_warn("%s: Unable to allocate memory for map\n",
__func__);
goto err_release_umem;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
mr->page_shift = PAGE_SHIFT;
mr->page_mask = PAGE_SIZE - 1;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
num_buf = 0;
map = mr->map;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
if (length > 0) {
buf = map[0]->buf;
for_each_sgtable_page (&umem->sgt_append.sgt, &sg_iter, 0) {
RDMA/rxe: Fix slab-out-bounds access which lead to kernel crash later BUG: KASAN: slab-out-of-bounds in rxe_mem_init_user+0x6c1/0x740 [rdma_rxe] Read of size 8 at addr ffff88805c01a608 by task ib_send_bw/573 CPU: 24 PID: 573 Comm: ib_send_bw Not tainted 5.0.0-rc5+ #189 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: rxe_mem_init_user+0x6c1/0x740 [rdma_rxe] rxe_reg_user_mr+0x9b/0x110 [rdma_rxe] ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs] ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs] rxe_mem_init_user+0x6c1/0x740 [rdma_rxe] rxe_reg_user_mr+0x9b/0x110 [rdma_rxe] ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs] ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs] ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs] ib_uverbs_ioctl+0x202/0x310 [ib_uverbs] do_vfs_ioctl+0x193/0x1440 ksys_ioctl+0x3a/0x70 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x13f/0x570 entry_SYSCALL_64_after_hwframe+0x49/0xbe Allocated by task 573: __kasan_kmalloc.constprop.5+0xc1/0xd0 __kmalloc+0x161/0x310 rxe_mem_alloc+0x52/0x470 [rdma_rxe] rxe_mem_init_user+0x113/0x740 [rdma_rxe] rxe_reg_user_mr+0x9b/0x110 [rdma_rxe] ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs] ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs] ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs] ib_uverbs_ioctl+0x202/0x310 [ib_uverbs] do_vfs_ioctl+0x193/0x1440 ksys_ioctl+0x3a/0x70 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x13f/0x570 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 0: __kasan_slab_free+0x12e/0x180 kfree+0x10a/0x2c0 rcu_process_callbacks+0xa77/0x1260 __do_softirq+0x2ad/0xacb Test scenario: ib_send_bw -x 1 -d rxe0 -a & ib_send_bw -x 1 -d rxe0 -a localhost Fixes: 8700e3e7c485 ("Soft RoCE driver") Reported-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-12 10:15:44 +02:00
if (num_buf >= RXE_BUF_PER_MAP) {
map++;
buf = map[0]->buf;
num_buf = 0;
}
vaddr = page_address(sg_page_iter_page(&sg_iter));
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
if (!vaddr) {
pr_warn("%s: Unable to get virtual address\n",
__func__);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
err = -ENOMEM;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
goto err_cleanup_map;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
buf->addr = (uintptr_t)vaddr;
buf->size = PAGE_SIZE;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
num_buf++;
buf++;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
}
mr->umem = umem;
mr->access = access;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
mr->offset = ib_umem_offset(umem);
mr->state = RXE_MR_STATE_VALID;
mr->type = IB_MR_TYPE_USER;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return 0;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
err_cleanup_map:
for (i = 0; i < mr->num_map; i++)
kfree(mr->map[i]);
kfree(mr->map);
err_release_umem:
ib_umem_release(umem);
err_out:
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return err;
}
int rxe_mr_init_fast(int max_pages, struct rxe_mr *mr)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
int err;
/* always allow remote access for FMRs */
rxe_mr_init(IB_ACCESS_REMOTE, mr);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
err = rxe_mr_alloc(mr, max_pages);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
if (err)
goto err1;
mr->max_buf = max_pages;
mr->state = RXE_MR_STATE_FREE;
mr->type = IB_MR_TYPE_MEM_REG;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return 0;
err1:
return err;
}
static void lookup_iova(struct rxe_mr *mr, u64 iova, int *m_out, int *n_out,
size_t *offset_out)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
size_t offset = iova - mr->ibmr.iova + mr->offset;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
int map_index;
int buf_index;
u64 length;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
if (likely(mr->page_shift)) {
*offset_out = offset & mr->page_mask;
offset >>= mr->page_shift;
*n_out = offset & mr->map_mask;
*m_out = offset >> mr->map_shift;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
} else {
map_index = 0;
buf_index = 0;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
length = mr->map[map_index]->buf[buf_index].size;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
while (offset >= length) {
offset -= length;
buf_index++;
if (buf_index == RXE_BUF_PER_MAP) {
map_index++;
buf_index = 0;
}
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
length = mr->map[map_index]->buf[buf_index].size;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
*m_out = map_index;
*n_out = buf_index;
*offset_out = offset;
}
}
void *iova_to_vaddr(struct rxe_mr *mr, u64 iova, int length)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
size_t offset;
int m, n;
void *addr;
if (mr->state != RXE_MR_STATE_VALID) {
pr_warn("mr not in valid state\n");
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
addr = NULL;
goto out;
}
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
if (!mr->map) {
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
addr = (void *)(uintptr_t)iova;
goto out;
}
if (mr_check_range(mr, iova, length)) {
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
pr_warn("range violation\n");
addr = NULL;
goto out;
}
lookup_iova(mr, iova, &m, &n, &offset);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
if (offset + length > mr->map[m]->buf[n].size) {
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
pr_warn("crosses page boundary\n");
addr = NULL;
goto out;
}
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
addr = (void *)(uintptr_t)mr->map[m]->buf[n].addr + offset;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
out:
return addr;
}
/* copy data from a range (vaddr, vaddr+length-1) to or from
* a mr object starting at iova.
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
*/
int rxe_mr_copy(struct rxe_mr *mr, u64 iova, void *addr, int length,
enum rxe_mr_copy_dir dir)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
int err;
int bytes;
u8 *va;
struct rxe_map **map;
struct rxe_phys_buf *buf;
int m;
int i;
size_t offset;
if (length == 0)
return 0;
if (mr->type == IB_MR_TYPE_DMA) {
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
u8 *src, *dest;
src = (dir == RXE_TO_MR_OBJ) ? addr : ((void *)(uintptr_t)iova);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
dest = (dir == RXE_TO_MR_OBJ) ? ((void *)(uintptr_t)iova) : addr;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
memcpy(dest, src, length);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return 0;
}
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
WARN_ON_ONCE(!mr->map);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
err = mr_check_range(mr, iova, length);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
if (err) {
err = -EFAULT;
goto err1;
}
lookup_iova(mr, iova, &m, &i, &offset);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
map = mr->map + m;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
buf = map[0]->buf + i;
while (length > 0) {
u8 *src, *dest;
va = (u8 *)(uintptr_t)buf->addr + offset;
src = (dir == RXE_TO_MR_OBJ) ? addr : va;
dest = (dir == RXE_TO_MR_OBJ) ? va : addr;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
bytes = buf->size - offset;
if (bytes > length)
bytes = length;
memcpy(dest, src, bytes);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
length -= bytes;
addr += bytes;
offset = 0;
buf++;
i++;
if (i == RXE_BUF_PER_MAP) {
i = 0;
map++;
buf = map[0]->buf;
}
}
return 0;
err1:
return err;
}
/* copy data in or out of a wqe, i.e. sg list
* under the control of a dma descriptor
*/
int copy_data(
struct rxe_pd *pd,
int access,
struct rxe_dma_info *dma,
void *addr,
int length,
enum rxe_mr_copy_dir dir)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
int bytes;
struct rxe_sge *sge = &dma->sge[dma->cur_sge];
int offset = dma->sge_offset;
int resid = dma->resid;
struct rxe_mr *mr = NULL;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
u64 iova;
int err;
if (length == 0)
return 0;
if (length > resid) {
err = -EINVAL;
goto err2;
}
if (sge->length && (offset < sge->length)) {
mr = lookup_mr(pd, access, sge->lkey, RXE_LOOKUP_LOCAL);
if (!mr) {
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
err = -EINVAL;
goto err1;
}
}
while (length > 0) {
bytes = length;
if (offset >= sge->length) {
if (mr) {
rxe_put(mr);
mr = NULL;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
sge++;
dma->cur_sge++;
offset = 0;
if (dma->cur_sge >= dma->num_sge) {
err = -ENOSPC;
goto err2;
}
if (sge->length) {
mr = lookup_mr(pd, access, sge->lkey,
RXE_LOOKUP_LOCAL);
if (!mr) {
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
err = -EINVAL;
goto err1;
}
} else {
continue;
}
}
if (bytes > sge->length - offset)
bytes = sge->length - offset;
if (bytes > 0) {
iova = sge->addr + offset;
err = rxe_mr_copy(mr, iova, addr, bytes, dir);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
if (err)
goto err2;
offset += bytes;
resid -= bytes;
length -= bytes;
addr += bytes;
}
}
dma->sge_offset = offset;
dma->resid = resid;
if (mr)
rxe_put(mr);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return 0;
err2:
if (mr)
rxe_put(mr);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
err1:
return err;
}
int advance_dma_data(struct rxe_dma_info *dma, unsigned int length)
{
struct rxe_sge *sge = &dma->sge[dma->cur_sge];
int offset = dma->sge_offset;
int resid = dma->resid;
while (length) {
unsigned int bytes;
if (offset >= sge->length) {
sge++;
dma->cur_sge++;
offset = 0;
if (dma->cur_sge >= dma->num_sge)
return -ENOSPC;
}
bytes = length;
if (bytes > sge->length - offset)
bytes = sge->length - offset;
offset += bytes;
resid -= bytes;
length -= bytes;
}
dma->sge_offset = offset;
dma->resid = resid;
return 0;
}
/* (1) find the mr corresponding to lkey/rkey
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
* depending on lookup_type
* (2) verify that the (qp) pd matches the mr pd
* (3) verify that the mr can support the requested access
* (4) verify that mr state is valid
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
*/
struct rxe_mr *lookup_mr(struct rxe_pd *pd, int access, u32 key,
enum rxe_mr_lookup_type type)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
struct rxe_mr *mr;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
struct rxe_dev *rxe = to_rdev(pd->ibpd.device);
int index = key >> 8;
mr = rxe_pool_get_index(&rxe->mr_pool, index);
if (!mr)
return NULL;
if (unlikely((type == RXE_LOOKUP_LOCAL && mr->lkey != key) ||
(type == RXE_LOOKUP_REMOTE && mr->rkey != key) ||
mr_pd(mr) != pd || (access && !(access & mr->access)) ||
mr->state != RXE_MR_STATE_VALID)) {
rxe_put(mr);
mr = NULL;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
return mr;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
int rxe_invalidate_mr(struct rxe_qp *qp, u32 key)
{
struct rxe_dev *rxe = to_rdev(qp->ibqp.device);
struct rxe_mr *mr;
int ret;
mr = rxe_pool_get_index(&rxe->mr_pool, key >> 8);
if (!mr) {
pr_err("%s: No MR for key %#x\n", __func__, key);
ret = -EINVAL;
goto err;
}
if (mr->rkey ? (key != mr->rkey) : (key != mr->lkey)) {
pr_err("%s: wr key (%#x) doesn't match mr key (%#x)\n",
__func__, key, (mr->rkey ? mr->rkey : mr->lkey));
ret = -EINVAL;
goto err_drop_ref;
}
if (atomic_read(&mr->num_mw) > 0) {
pr_warn("%s: Attempt to invalidate an MR while bound to MWs\n",
__func__);
ret = -EINVAL;
goto err_drop_ref;
}
if (unlikely(mr->type != IB_MR_TYPE_MEM_REG)) {
pr_warn("%s: mr->type (%d) is wrong type\n", __func__, mr->type);
ret = -EINVAL;
goto err_drop_ref;
}
mr->state = RXE_MR_STATE_FREE;
ret = 0;
err_drop_ref:
rxe_put(mr);
err:
return ret;
}
/* user can (re)register fast MR by executing a REG_MR WQE.
* user is expected to hold a reference on the ib mr until the
* WQE completes.
* Once a fast MR is created this is the only way to change the
* private keys. It is the responsibility of the user to maintain
* the ib mr keys in sync with rxe mr keys.
*/
int rxe_reg_fast_mr(struct rxe_qp *qp, struct rxe_send_wqe *wqe)
{
struct rxe_mr *mr = to_rmr(wqe->wr.wr.reg.mr);
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
u32 key = wqe->wr.wr.reg.key;
u32 access = wqe->wr.wr.reg.access;
/* user can only register MR in free state */
if (unlikely(mr->state != RXE_MR_STATE_FREE)) {
pr_warn("%s: mr->lkey = 0x%x not free\n",
__func__, mr->lkey);
return -EINVAL;
}
/* user can only register mr with qp in same protection domain */
if (unlikely(qp->ibqp.pd != mr->ibmr.pd)) {
pr_warn("%s: qp->pd and mr->pd don't match\n",
__func__);
return -EINVAL;
}
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
/* user is only allowed to change key portion of l/rkey */
if (unlikely((mr->lkey & ~0xff) != (key & ~0xff))) {
pr_warn("%s: key = 0x%x has wrong index mr->lkey = 0x%x\n",
__func__, key, mr->lkey);
return -EINVAL;
}
mr->access = access;
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
mr->lkey = key;
mr->rkey = (access & IB_ACCESS_REMOTE) ? key : 0;
mr->ibmr.iova = wqe->wr.wr.reg.mr->iova;
mr->state = RXE_MR_STATE_VALID;
return 0;
}
int rxe_dereg_mr(struct ib_mr *ibmr, struct ib_udata *udata)
{
struct rxe_mr *mr = to_rmr(ibmr);
/* See IBA 10.6.7.2.6 */
if (atomic_read(&mr->num_mw) > 0)
return -EINVAL;
rxe_cleanup(mr);
return 0;
}
void rxe_mr_cleanup(struct rxe_pool_elem *elem)
{
struct rxe_mr *mr = container_of(elem, typeof(*mr), elem);
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
int i;
rxe_put(mr_pd(mr));
ib_umem_release(mr->umem);
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
if (mr->map) {
for (i = 0; i < mr->num_map; i++)
kfree(mr->map[i]);
Revert "RDMA/rxe: Create duplicate mapping tables for FMRs" Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-26 03:16:26 +00:00
kfree(mr->map);
}
}