Files
linux/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_init.c

154 lines
6.8 KiB
C
Raw Normal View History

/*
* Copyright 2016-2020 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: AMD
*
*/
#include "dce110/dce110_hw_sequencer.h"
#include "dcn10/dcn10_hw_sequencer.h"
#include "dcn20/dcn20_hwseq.h"
#include "dcn21/dcn21_hwseq.h"
#include "dcn30/dcn30_hwseq.h"
#include "dcn301_hwseq.h"
#include "dcn301_init.h"
static const struct hw_sequencer_funcs dcn301_funcs = {
.program_gamut_remap = dcn10_program_gamut_remap,
.init_hw = dcn10_init_hw,
.power_down_on_boot = dcn10_power_down_on_boot,
.apply_ctx_to_hw = dce110_apply_ctx_to_hw,
.apply_ctx_for_surface = NULL,
.program_front_end_for_ctx = dcn20_program_front_end_for_ctx,
.wait_for_pending_cleared = dcn10_wait_for_pending_cleared,
.post_unlock_program_front_end = dcn20_post_unlock_program_front_end,
.update_plane_addr = dcn20_update_plane_addr,
.update_dchub = dcn10_update_dchub,
.update_pending_status = dcn10_update_pending_status,
.program_output_csc = dcn20_program_output_csc,
.enable_accelerated_mode = dce110_enable_accelerated_mode,
.enable_timing_synchronization = dcn10_enable_timing_synchronization,
.enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset,
.update_info_frame = dcn30_update_info_frame,
.send_immediate_sdp_message = dcn10_send_immediate_sdp_message,
.enable_stream = dcn20_enable_stream,
.disable_stream = dce110_disable_stream,
.unblank_stream = dcn20_unblank_stream,
#ifdef FREESYNC_POWER_OPTIMIZE
.are_streams_coarse_grain_aligned = dcn20_are_streams_coarse_grain_aligned,
#endif
.blank_stream = dce110_blank_stream,
.enable_audio_stream = dce110_enable_audio_stream,
.disable_audio_stream = dce110_disable_audio_stream,
.disable_plane = dcn20_disable_plane,
.pipe_control_lock = dcn20_pipe_control_lock,
.interdependent_update_lock = dcn10_lock_all_pipes,
.cursor_lock = dcn10_cursor_lock,
.prepare_bandwidth = dcn20_prepare_bandwidth,
.optimize_bandwidth = dcn20_optimize_bandwidth,
.update_bandwidth = dcn20_update_bandwidth,
.set_drr = dcn10_set_drr,
.get_position = dcn10_get_position,
.set_static_screen_control = dcn10_set_static_screen_control,
.setup_stereo = dcn10_setup_stereo,
.set_avmute = dcn30_set_avmute,
.log_hw_state = dcn10_log_hw_state,
.get_hw_state = dcn10_get_hw_state,
.clear_status_bits = dcn10_clear_status_bits,
.wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
.edp_power_control = dce110_edp_power_control,
.edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready,
.set_cursor_position = dcn10_set_cursor_position,
.set_cursor_attribute = dcn10_set_cursor_attribute,
.set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level,
.setup_periodic_interrupt = dcn10_setup_periodic_interrupt,
.set_clock = dcn10_set_clock,
.get_clock = dcn10_get_clock,
.program_triplebuffer = dcn20_program_triple_buffer,
.enable_writeback = dcn30_enable_writeback,
.disable_writeback = dcn30_disable_writeback,
.update_writeback = dcn30_update_writeback,
.mmhubbub_warmup = dcn30_mmhubbub_warmup,
.dmdata_status_done = dcn20_dmdata_status_done,
.program_dmdata_engine = dcn30_program_dmdata_engine,
.set_dmdata_attributes = dcn20_set_dmdata_attributes,
.init_sys_ctx = dcn20_init_sys_ctx,
.init_vm_ctx = dcn20_init_vm_ctx,
.set_flip_control_gsl = dcn20_set_flip_control_gsl,
.get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync,
.calc_vupdate_position = dcn10_calc_vupdate_position,
.set_backlight_level = dcn21_set_backlight_level,
.set_abm_immediate_disable = dcn21_set_abm_immediate_disable,
.set_pipe = dcn21_set_pipe,
drm/amd/display: rework recent update PHY state commit [why] Original change 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") was implemented by assuming stream's dpms off is equivalent to PHY power off. This assumption doesn't hold in following situations: 1. MST multiple stream scenario, where multiple streams are sharing the same PHY output. Toggle dpms off for one of the stream doesn't power off the PHY due to the presence of other streams. 2. enable stream failure scenario, where enable stream fails due to failure of link training. This will cause DPMS off is set to false, while the actual PHY power state is off in certain cases. Due to the problematic assumption, the logic will skip disabling other streams for MST multiple stream scenario, therefore PHY is not actually powered off. [how] 1. Rework this refactor by moving PHY state update down to hardware level, where we update PHY state in place when hardware sequencer is actually changing the power state of the PHY hardware. 2. Reimplement symclk on TX off workaround in place when we are actually calling transmitter control to power off PHY in dcn32. Note the workaround is added due to the lack of proper software interface to set TX while keeping symclk on. We plan to address this interface problem so we can set TX off only without affecting symclk in future dcn versions. Fixes: 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-31 14:56:46 -04:00
.enable_lvds_link_output = dce110_enable_lvds_link_output,
.enable_tmds_link_output = dce110_enable_tmds_link_output,
.enable_dp_link_output = dce110_enable_dp_link_output,
.disable_link_output = dce110_disable_link_output,
drm/amd/display: fix the NULL pointer that missed set_disp_pattern_generator callback This patch is to fix the NULL pointer that missed set_disp_pattern_generator callback on DCN301 [ 505.054167] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 505.054176] #PF: supervisor instruction fetch in kernel mode [ 505.054181] #PF: error_code(0x0010) - not-present page [ 505.054185] PGD 0 P4D 0 [ 505.054199] Oops: 0010 [#1] SMP NOPTI [ 505.054211] CPU: 6 PID: 1306 Comm: modprobe Tainted: G W OE 5.9.0-rc5-custom #1 [ 505.054216] Hardware name: AMD Chachani-VN/Chachani-VN, BIOS WCH0A29N_RAPV16.FD 10/29/2020 [ 505.054225] RIP: 0010:0x0 [ 505.054234] Code: Bad RIP value. [ 505.054239] RSP: 0018:ffffb88541c66f60 EFLAGS: 00010206 [ 505.054245] RAX: 0000000000000000 RBX: ffff912836070000 RCX: 0000000000000003 [ 505.054248] RDX: 000000000000000c RSI: ffff9128365001e8 RDI: ffff912836070000 [ 505.054252] RBP: ffffb88541c66fd8 R08: 0000000000000002 R09: ffffb88541c66fa2 [ 505.054265] R10: 0000000000009580 R11: 0000000000000008 R12: ffff9128365001e8 [ 505.054272] R13: 000000000000000c R14: 0000000000000438 R15: ffff9128a48bd000 [ 505.054279] FS: 00007f09f999f540(0000) GS:ffff9128b3f80000(0000) knlGS:0000000000000000 [ 505.054284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 505.054288] CR2: ffffffffffffffd6 CR3: 00000002db98c000 CR4: 0000000000350ee0 [ 505.054291] Call Trace: [ 505.055024] dcn20_blank_pixel_data+0x148/0x260 [amdgpu] [ 505.055730] dcn20_enable_stream_timing+0x381/0x47c [amdgpu] [ 505.056641] dce110_apply_ctx_to_hw+0x337/0x577 [amdgpu] [ 505.056667] ? put_object+0x2f/0x40 [ 505.057329] dc_commit_state+0x4b3/0x9d0 [amdgpu] [ 505.058030] amdgpu_dm_atomic_commit_tail+0x405/0x1ec6 [amdgpu] [ 505.058053] ? update_stack_state+0x103/0x170 [ 505.058071] ? __module_text_address+0x12/0x60 Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: Changfeng <Changfeng.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-02 12:52:08 +08:00
.set_disp_pattern_generator = dcn30_set_disp_pattern_generator,
.get_dcc_en_bits = dcn10_get_dcc_en_bits,
.optimize_pwr_state = dcn21_optimize_pwr_state,
.exit_optimized_pwr_state = dcn21_exit_optimized_pwr_state,
.update_visual_confirm_color = dcn20_update_visual_confirm_color,
};
static const struct hwseq_private_funcs dcn301_private_funcs = {
.init_pipes = dcn10_init_pipes,
.update_plane_addr = dcn20_update_plane_addr,
.plane_atomic_disconnect = dcn10_plane_atomic_disconnect,
.update_mpcc = dcn20_update_mpcc,
.set_input_transfer_func = dcn30_set_input_transfer_func,
.set_output_transfer_func = dcn30_set_output_transfer_func,
.power_down = dce110_power_down,
.enable_display_power_gating = dcn10_dummy_display_power_gating,
.blank_pixel_data = dcn20_blank_pixel_data,
.reset_hw_ctx_wrap = dcn20_reset_hw_ctx_wrap,
.enable_stream_timing = dcn20_enable_stream_timing,
.edp_backlight_control = dce110_edp_backlight_control,
.disable_stream_gating = dcn20_disable_stream_gating,
.enable_stream_gating = dcn20_enable_stream_gating,
.setup_vupdate_interrupt = dcn20_setup_vupdate_interrupt,
.did_underflow_occur = dcn10_did_underflow_occur,
.init_blank = dcn20_init_blank,
.disable_vga = dcn20_disable_vga,
.bios_golden_init = dcn10_bios_golden_init,
.plane_atomic_disable = dcn20_plane_atomic_disable,
.plane_atomic_power_down = dcn10_plane_atomic_power_down,
.enable_power_gating_plane = dcn20_enable_power_gating_plane,
.dpp_pg_control = dcn20_dpp_pg_control,
.hubp_pg_control = dcn20_hubp_pg_control,
.program_all_writeback_pipes_in_tree = dcn30_program_all_writeback_pipes_in_tree,
.update_odm = dcn20_update_odm,
.dsc_pg_control = dcn20_dsc_pg_control,
.set_hdr_multiplier = dcn10_set_hdr_multiplier,
.verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high,
.wait_for_blank_complete = dcn20_wait_for_blank_complete,
.dccg_init = dcn20_dccg_init,
.set_blend_lut = dcn30_set_blend_lut,
.set_shaper_3dlut = dcn20_set_shaper_3dlut,
};
void dcn301_hw_sequencer_construct(struct dc *dc)
{
dc->hwss = dcn301_funcs;
dc->hwseq->funcs = dcn301_private_funcs;
}