efi/loongarch: Add efistub booting support
This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.
We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.
We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-08-19 18:20:37 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
|
/*
|
|
|
|
|
* Author: Yun Liu <liuyun@loongson.cn>
|
|
|
|
|
* Huacai Chen <chenhuacai@loongson.cn>
|
|
|
|
|
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <asm/efi.h>
|
|
|
|
|
#include <asm/addrspace.h>
|
|
|
|
|
#include "efistub.h"
|
|
|
|
|
|
efi/loongarch: libstub: remove dependency on flattened DT
LoongArch does not use FDT or DT natively [yet], and the only reason it
currently uses it is so that it can reuse the existing EFI stub code.
Overloading the DT with data passed between the EFI stub and the core
kernel has been a source of problems: there is the overlap between
information provided by EFI which DT can also provide (initrd base/size,
command line, memory descriptions), requiring us to reason about which
is which and what to prioritize. It has also resulted in ABI leaks,
i.e., internal ABI being promoted to external ABI inadvertently because
the bootloader can set the EFI stub's DT properties as well (e.g.,
"kaslr-seed"). This has become especially problematic with boot
environments that want to pretend that EFI boot is being done (to access
ACPI and SMBIOS tables, for instance) but have no ability to execute the
EFI stub, and so the environment that the EFI stub creates is emulated
[poorly, in some cases].
Another downside of treating DT like this is that the DT binary that the
kernel receives is different from the one created by the firmware, which
is undesirable in the context of secure and measured boot.
Given that LoongArch support in Linux is brand new, we can avoid these
pitfalls, and treat the DT strictly as a hardware description, and use a
separate handover method between the EFI stub and the kernel. Now that
initrd loading and passing the EFI memory map have been refactored into
pure EFI routines that use EFI configuration tables, the only thing we
need to pass directly is the kernel command line (even if we could pass
this via a config table as well, it is used extremely early, so passing
it directly is preferred in this case.)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-16 19:48:53 +02:00
|
|
|
typedef void __noreturn (*kernel_entry_t)(bool efi, unsigned long cmdline,
|
|
|
|
|
unsigned long systab);
|
efi/loongarch: Add efistub booting support
This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.
We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.
We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-08-19 18:20:37 +08:00
|
|
|
|
|
|
|
|
extern int kernel_asize;
|
|
|
|
|
extern int kernel_fsize;
|
|
|
|
|
extern int kernel_offset;
|
|
|
|
|
extern kernel_entry_t kernel_entry;
|
|
|
|
|
|
|
|
|
|
efi_status_t check_platform_features(void)
|
|
|
|
|
{
|
|
|
|
|
return EFI_SUCCESS;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
efi_status_t handle_kernel_image(unsigned long *image_addr,
|
|
|
|
|
unsigned long *image_size,
|
|
|
|
|
unsigned long *reserve_addr,
|
|
|
|
|
unsigned long *reserve_size,
|
|
|
|
|
efi_loaded_image_t *image,
|
|
|
|
|
efi_handle_t image_handle)
|
|
|
|
|
{
|
|
|
|
|
efi_status_t status;
|
|
|
|
|
unsigned long kernel_addr = 0;
|
|
|
|
|
|
|
|
|
|
kernel_addr = (unsigned long)&kernel_offset - kernel_offset;
|
|
|
|
|
|
|
|
|
|
status = efi_relocate_kernel(&kernel_addr, kernel_fsize, kernel_asize,
|
|
|
|
|
PHYSADDR(VMLINUX_LOAD_ADDRESS), SZ_2M, 0x0);
|
|
|
|
|
|
|
|
|
|
*image_addr = kernel_addr;
|
|
|
|
|
*image_size = kernel_asize;
|
|
|
|
|
|
|
|
|
|
return status;
|
|
|
|
|
}
|
|
|
|
|
|
efi/loongarch: libstub: remove dependency on flattened DT
LoongArch does not use FDT or DT natively [yet], and the only reason it
currently uses it is so that it can reuse the existing EFI stub code.
Overloading the DT with data passed between the EFI stub and the core
kernel has been a source of problems: there is the overlap between
information provided by EFI which DT can also provide (initrd base/size,
command line, memory descriptions), requiring us to reason about which
is which and what to prioritize. It has also resulted in ABI leaks,
i.e., internal ABI being promoted to external ABI inadvertently because
the bootloader can set the EFI stub's DT properties as well (e.g.,
"kaslr-seed"). This has become especially problematic with boot
environments that want to pretend that EFI boot is being done (to access
ACPI and SMBIOS tables, for instance) but have no ability to execute the
EFI stub, and so the environment that the EFI stub creates is emulated
[poorly, in some cases].
Another downside of treating DT like this is that the DT binary that the
kernel receives is different from the one created by the firmware, which
is undesirable in the context of secure and measured boot.
Given that LoongArch support in Linux is brand new, we can avoid these
pitfalls, and treat the DT strictly as a hardware description, and use a
separate handover method between the EFI stub and the kernel. Now that
initrd loading and passing the EFI memory map have been refactored into
pure EFI routines that use EFI configuration tables, the only thing we
need to pass directly is the kernel command line (even if we could pass
this via a config table as well, it is used extremely early, so passing
it directly is preferred in this case.)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-16 19:48:53 +02:00
|
|
|
struct exit_boot_struct {
|
|
|
|
|
efi_memory_desc_t *runtime_map;
|
|
|
|
|
int runtime_entry_count;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static efi_status_t exit_boot_func(struct efi_boot_memmap *map, void *priv)
|
|
|
|
|
{
|
|
|
|
|
struct exit_boot_struct *p = priv;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Update the memory map with virtual addresses. The function will also
|
|
|
|
|
* populate @runtime_map with copies of just the EFI_MEMORY_RUNTIME
|
|
|
|
|
* entries so that we can pass it straight to SetVirtualAddressMap()
|
|
|
|
|
*/
|
|
|
|
|
efi_get_virtmap(map->map, map->map_size, map->desc_size,
|
|
|
|
|
p->runtime_map, &p->runtime_entry_count);
|
|
|
|
|
|
|
|
|
|
return EFI_SUCCESS;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
efi_status_t efi_boot_kernel(void *handle, efi_loaded_image_t *image,
|
|
|
|
|
unsigned long kernel_addr, char *cmdline_ptr)
|
efi/loongarch: Add efistub booting support
This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.
We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.
We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-08-19 18:20:37 +08:00
|
|
|
{
|
|
|
|
|
kernel_entry_t real_kernel_entry;
|
efi/loongarch: libstub: remove dependency on flattened DT
LoongArch does not use FDT or DT natively [yet], and the only reason it
currently uses it is so that it can reuse the existing EFI stub code.
Overloading the DT with data passed between the EFI stub and the core
kernel has been a source of problems: there is the overlap between
information provided by EFI which DT can also provide (initrd base/size,
command line, memory descriptions), requiring us to reason about which
is which and what to prioritize. It has also resulted in ABI leaks,
i.e., internal ABI being promoted to external ABI inadvertently because
the bootloader can set the EFI stub's DT properties as well (e.g.,
"kaslr-seed"). This has become especially problematic with boot
environments that want to pretend that EFI boot is being done (to access
ACPI and SMBIOS tables, for instance) but have no ability to execute the
EFI stub, and so the environment that the EFI stub creates is emulated
[poorly, in some cases].
Another downside of treating DT like this is that the DT binary that the
kernel receives is different from the one created by the firmware, which
is undesirable in the context of secure and measured boot.
Given that LoongArch support in Linux is brand new, we can avoid these
pitfalls, and treat the DT strictly as a hardware description, and use a
separate handover method between the EFI stub and the kernel. Now that
initrd loading and passing the EFI memory map have been refactored into
pure EFI routines that use EFI configuration tables, the only thing we
need to pass directly is the kernel command line (even if we could pass
this via a config table as well, it is used extremely early, so passing
it directly is preferred in this case.)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-16 19:48:53 +02:00
|
|
|
struct exit_boot_struct priv;
|
|
|
|
|
unsigned long desc_size;
|
|
|
|
|
efi_status_t status;
|
|
|
|
|
u32 desc_ver;
|
|
|
|
|
|
|
|
|
|
status = efi_alloc_virtmap(&priv.runtime_map, &desc_size, &desc_ver);
|
|
|
|
|
if (status != EFI_SUCCESS) {
|
|
|
|
|
efi_err("Unable to retrieve UEFI memory map.\n");
|
|
|
|
|
return status;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
efi_info("Exiting boot services\n");
|
|
|
|
|
|
|
|
|
|
efi_novamap = false;
|
|
|
|
|
status = efi_exit_boot_services(handle, &priv, exit_boot_func);
|
|
|
|
|
if (status != EFI_SUCCESS)
|
|
|
|
|
return status;
|
|
|
|
|
|
|
|
|
|
/* Install the new virtual address map */
|
|
|
|
|
efi_rt_call(set_virtual_address_map,
|
|
|
|
|
priv.runtime_entry_count * desc_size, desc_size,
|
|
|
|
|
desc_ver, priv.runtime_map);
|
efi/loongarch: Add efistub booting support
This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.
We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.
We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-08-19 18:20:37 +08:00
|
|
|
|
|
|
|
|
/* Config Direct Mapping */
|
|
|
|
|
csr_write64(CSR_DMW0_INIT, LOONGARCH_CSR_DMWIN0);
|
|
|
|
|
csr_write64(CSR_DMW1_INIT, LOONGARCH_CSR_DMWIN1);
|
|
|
|
|
|
|
|
|
|
real_kernel_entry = (kernel_entry_t)
|
efi/loongarch: libstub: remove dependency on flattened DT
LoongArch does not use FDT or DT natively [yet], and the only reason it
currently uses it is so that it can reuse the existing EFI stub code.
Overloading the DT with data passed between the EFI stub and the core
kernel has been a source of problems: there is the overlap between
information provided by EFI which DT can also provide (initrd base/size,
command line, memory descriptions), requiring us to reason about which
is which and what to prioritize. It has also resulted in ABI leaks,
i.e., internal ABI being promoted to external ABI inadvertently because
the bootloader can set the EFI stub's DT properties as well (e.g.,
"kaslr-seed"). This has become especially problematic with boot
environments that want to pretend that EFI boot is being done (to access
ACPI and SMBIOS tables, for instance) but have no ability to execute the
EFI stub, and so the environment that the EFI stub creates is emulated
[poorly, in some cases].
Another downside of treating DT like this is that the DT binary that the
kernel receives is different from the one created by the firmware, which
is undesirable in the context of secure and measured boot.
Given that LoongArch support in Linux is brand new, we can avoid these
pitfalls, and treat the DT strictly as a hardware description, and use a
separate handover method between the EFI stub and the kernel. Now that
initrd loading and passing the EFI memory map have been refactored into
pure EFI routines that use EFI configuration tables, the only thing we
need to pass directly is the kernel command line (even if we could pass
this via a config table as well, it is used extremely early, so passing
it directly is preferred in this case.)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-16 19:48:53 +02:00
|
|
|
((unsigned long)&kernel_entry - kernel_addr + VMLINUX_LOAD_ADDRESS);
|
efi/loongarch: Add efistub booting support
This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.
We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.
We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-08-19 18:20:37 +08:00
|
|
|
|
efi/loongarch: libstub: remove dependency on flattened DT
LoongArch does not use FDT or DT natively [yet], and the only reason it
currently uses it is so that it can reuse the existing EFI stub code.
Overloading the DT with data passed between the EFI stub and the core
kernel has been a source of problems: there is the overlap between
information provided by EFI which DT can also provide (initrd base/size,
command line, memory descriptions), requiring us to reason about which
is which and what to prioritize. It has also resulted in ABI leaks,
i.e., internal ABI being promoted to external ABI inadvertently because
the bootloader can set the EFI stub's DT properties as well (e.g.,
"kaslr-seed"). This has become especially problematic with boot
environments that want to pretend that EFI boot is being done (to access
ACPI and SMBIOS tables, for instance) but have no ability to execute the
EFI stub, and so the environment that the EFI stub creates is emulated
[poorly, in some cases].
Another downside of treating DT like this is that the DT binary that the
kernel receives is different from the one created by the firmware, which
is undesirable in the context of secure and measured boot.
Given that LoongArch support in Linux is brand new, we can avoid these
pitfalls, and treat the DT strictly as a hardware description, and use a
separate handover method between the EFI stub and the kernel. Now that
initrd loading and passing the EFI memory map have been refactored into
pure EFI routines that use EFI configuration tables, the only thing we
need to pass directly is the kernel command line (even if we could pass
this via a config table as well, it is used extremely early, so passing
it directly is preferred in this case.)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-16 19:48:53 +02:00
|
|
|
real_kernel_entry(true, (unsigned long)cmdline_ptr,
|
|
|
|
|
(unsigned long)efi_system_table);
|
efi/loongarch: Add efistub booting support
This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.
We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.
We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-08-19 18:20:37 +08:00
|
|
|
}
|