linux/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c

1063 lines
28 KiB
C
Raw Normal View History

octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
// SPDX-License-Identifier: GPL-2.0
/* Marvell RVU Ethernet driver
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
*
* Copyright (C) 2021 Marvell.
*
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
*/
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/inetdevice.h>
#include <linux/rhashtable.h>
#include <linux/bitfield.h>
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
#include <net/flow_dissector.h>
#include <net/pkt_cls.h>
#include <net/tc_act/tc_gact.h>
#include <net/tc_act/tc_mirred.h>
#include <net/tc_act/tc_vlan.h>
#include <net/ipv6.h>
#include "cn10k.h"
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
#include "otx2_common.h"
/* Egress rate limiting definitions */
#define MAX_BURST_EXPONENT 0x0FULL
#define MAX_BURST_MANTISSA 0xFFULL
#define MAX_BURST_SIZE 130816ULL
#define MAX_RATE_DIVIDER_EXPONENT 12ULL
#define MAX_RATE_EXPONENT 0x0FULL
#define MAX_RATE_MANTISSA 0xFFULL
/* Bitfields in NIX_TLX_PIR register */
#define TLX_RATE_MANTISSA GENMASK_ULL(8, 1)
#define TLX_RATE_EXPONENT GENMASK_ULL(12, 9)
#define TLX_RATE_DIVIDER_EXPONENT GENMASK_ULL(16, 13)
#define TLX_BURST_MANTISSA GENMASK_ULL(36, 29)
#define TLX_BURST_EXPONENT GENMASK_ULL(40, 37)
struct otx2_tc_flow_stats {
u64 bytes;
u64 pkts;
u64 used;
};
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
struct otx2_tc_flow {
struct rhash_head node;
unsigned long cookie;
unsigned int bitpos;
struct rcu_head rcu;
struct otx2_tc_flow_stats stats;
spinlock_t lock; /* lock for stats */
u16 rq;
u16 entry;
u16 leaf_profile;
bool is_act_police;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
};
int otx2_tc_alloc_ent_bitmap(struct otx2_nic *nic)
{
struct otx2_tc_info *tc = &nic->tc_info;
if (!nic->flow_cfg->max_flows || is_otx2_vf(nic->pcifunc))
return 0;
/* Max flows changed, free the existing bitmap */
kfree(tc->tc_entries_bitmap);
tc->tc_entries_bitmap =
kcalloc(BITS_TO_LONGS(nic->flow_cfg->max_flows),
sizeof(long), GFP_KERNEL);
if (!tc->tc_entries_bitmap) {
netdev_err(nic->netdev,
"Unable to alloc TC flow entries bitmap\n");
return -ENOMEM;
}
return 0;
}
EXPORT_SYMBOL(otx2_tc_alloc_ent_bitmap);
static void otx2_get_egress_burst_cfg(u32 burst, u32 *burst_exp,
u32 *burst_mantissa)
{
unsigned int tmp;
/* Burst is calculated as
* ((256 + BURST_MANTISSA) << (1 + BURST_EXPONENT)) / 256
* Max supported burst size is 130,816 bytes.
*/
burst = min_t(u32, burst, MAX_BURST_SIZE);
if (burst) {
*burst_exp = ilog2(burst) ? ilog2(burst) - 1 : 0;
tmp = burst - rounddown_pow_of_two(burst);
if (burst < MAX_BURST_MANTISSA)
*burst_mantissa = tmp * 2;
else
*burst_mantissa = tmp / (1ULL << (*burst_exp - 7));
} else {
*burst_exp = MAX_BURST_EXPONENT;
*burst_mantissa = MAX_BURST_MANTISSA;
}
}
static void otx2_get_egress_rate_cfg(u32 maxrate, u32 *exp,
u32 *mantissa, u32 *div_exp)
{
unsigned int tmp;
/* Rate calculation by hardware
*
* PIR_ADD = ((256 + mantissa) << exp) / 256
* rate = (2 * PIR_ADD) / ( 1 << div_exp)
* The resultant rate is in Mbps.
*/
/* 2Mbps to 100Gbps can be expressed with div_exp = 0.
* Setting this to '0' will ease the calculation of
* exponent and mantissa.
*/
*div_exp = 0;
if (maxrate) {
*exp = ilog2(maxrate) ? ilog2(maxrate) - 1 : 0;
tmp = maxrate - rounddown_pow_of_two(maxrate);
if (maxrate < MAX_RATE_MANTISSA)
*mantissa = tmp * 2;
else
*mantissa = tmp / (1ULL << (*exp - 7));
} else {
/* Instead of disabling rate limiting, set all values to max */
*exp = MAX_RATE_EXPONENT;
*mantissa = MAX_RATE_MANTISSA;
}
}
static int otx2_set_matchall_egress_rate(struct otx2_nic *nic, u32 burst, u32 maxrate)
{
struct otx2_hw *hw = &nic->hw;
struct nix_txschq_config *req;
u32 burst_exp, burst_mantissa;
u32 exp, mantissa, div_exp;
int txschq, err;
/* All SQs share the same TL4, so pick the first scheduler */
txschq = hw->txschq_list[NIX_TXSCH_LVL_TL4][0];
/* Get exponent and mantissa values from the desired rate */
otx2_get_egress_burst_cfg(burst, &burst_exp, &burst_mantissa);
otx2_get_egress_rate_cfg(maxrate, &exp, &mantissa, &div_exp);
mutex_lock(&nic->mbox.lock);
req = otx2_mbox_alloc_msg_nix_txschq_cfg(&nic->mbox);
if (!req) {
mutex_unlock(&nic->mbox.lock);
return -ENOMEM;
}
req->lvl = NIX_TXSCH_LVL_TL4;
req->num_regs = 1;
req->reg[0] = NIX_AF_TL4X_PIR(txschq);
req->regval[0] = FIELD_PREP(TLX_BURST_EXPONENT, burst_exp) |
FIELD_PREP(TLX_BURST_MANTISSA, burst_mantissa) |
FIELD_PREP(TLX_RATE_DIVIDER_EXPONENT, div_exp) |
FIELD_PREP(TLX_RATE_EXPONENT, exp) |
FIELD_PREP(TLX_RATE_MANTISSA, mantissa) | BIT_ULL(0);
err = otx2_sync_mbox_msg(&nic->mbox);
mutex_unlock(&nic->mbox.lock);
return err;
}
static int otx2_tc_validate_flow(struct otx2_nic *nic,
struct flow_action *actions,
struct netlink_ext_ack *extack)
{
if (nic->flags & OTX2_FLAG_INTF_DOWN) {
NL_SET_ERR_MSG_MOD(extack, "Interface not initialized");
return -EINVAL;
}
if (!flow_action_has_entries(actions)) {
NL_SET_ERR_MSG_MOD(extack, "MATCHALL offload called with no action");
return -EINVAL;
}
if (!flow_offload_has_one_action(actions)) {
NL_SET_ERR_MSG_MOD(extack,
"Egress MATCHALL offload supports only 1 policing action");
return -EINVAL;
}
return 0;
}
static int otx2_tc_egress_matchall_install(struct otx2_nic *nic,
struct tc_cls_matchall_offload *cls)
{
struct netlink_ext_ack *extack = cls->common.extack;
struct flow_action *actions = &cls->rule->action;
struct flow_action_entry *entry;
u32 rate;
int err;
err = otx2_tc_validate_flow(nic, actions, extack);
if (err)
return err;
if (nic->flags & OTX2_FLAG_TC_MATCHALL_EGRESS_ENABLED) {
NL_SET_ERR_MSG_MOD(extack,
"Only one Egress MATCHALL ratelimiter can be offloaded");
return -ENOMEM;
}
entry = &cls->rule->action.entries[0];
switch (entry->id) {
case FLOW_ACTION_POLICE:
if (entry->police.rate_pkt_ps) {
NL_SET_ERR_MSG_MOD(extack, "QoS offload not support packets per second");
return -EOPNOTSUPP;
}
/* Convert bytes per second to Mbps */
rate = entry->police.rate_bytes_ps * 8;
rate = max_t(u32, rate / 1000000, 1);
err = otx2_set_matchall_egress_rate(nic, entry->police.burst, rate);
if (err)
return err;
nic->flags |= OTX2_FLAG_TC_MATCHALL_EGRESS_ENABLED;
break;
default:
NL_SET_ERR_MSG_MOD(extack,
"Only police action is supported with Egress MATCHALL offload");
return -EOPNOTSUPP;
}
return 0;
}
static int otx2_tc_egress_matchall_delete(struct otx2_nic *nic,
struct tc_cls_matchall_offload *cls)
{
struct netlink_ext_ack *extack = cls->common.extack;
int err;
if (nic->flags & OTX2_FLAG_INTF_DOWN) {
NL_SET_ERR_MSG_MOD(extack, "Interface not initialized");
return -EINVAL;
}
err = otx2_set_matchall_egress_rate(nic, 0, 0);
nic->flags &= ~OTX2_FLAG_TC_MATCHALL_EGRESS_ENABLED;
return err;
}
static int otx2_tc_act_set_police(struct otx2_nic *nic,
struct otx2_tc_flow *node,
struct flow_cls_offload *f,
u64 rate, u32 burst, u32 mark,
struct npc_install_flow_req *req, bool pps)
{
struct netlink_ext_ack *extack = f->common.extack;
struct otx2_hw *hw = &nic->hw;
int rq_idx, rc;
rq_idx = find_first_zero_bit(&nic->rq_bmap, hw->rx_queues);
if (rq_idx >= hw->rx_queues) {
NL_SET_ERR_MSG_MOD(extack, "Police action rules exceeded");
return -EINVAL;
}
mutex_lock(&nic->mbox.lock);
rc = cn10k_alloc_leaf_profile(nic, &node->leaf_profile);
if (rc) {
mutex_unlock(&nic->mbox.lock);
return rc;
}
rc = cn10k_set_ipolicer_rate(nic, node->leaf_profile, burst, rate, pps);
if (rc)
goto free_leaf;
rc = cn10k_map_unmap_rq_policer(nic, rq_idx, node->leaf_profile, true);
if (rc)
goto free_leaf;
mutex_unlock(&nic->mbox.lock);
req->match_id = mark & 0xFFFFULL;
req->index = rq_idx;
req->op = NIX_RX_ACTIONOP_UCAST;
set_bit(rq_idx, &nic->rq_bmap);
node->is_act_police = true;
node->rq = rq_idx;
return 0;
free_leaf:
if (cn10k_free_leaf_profile(nic, node->leaf_profile))
netdev_err(nic->netdev,
"Unable to free leaf bandwidth profile(%d)\n",
node->leaf_profile);
mutex_unlock(&nic->mbox.lock);
return rc;
}
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
static int otx2_tc_parse_actions(struct otx2_nic *nic,
struct flow_action *flow_action,
struct npc_install_flow_req *req,
struct flow_cls_offload *f,
struct otx2_tc_flow *node)
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
{
struct netlink_ext_ack *extack = f->common.extack;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
struct flow_action_entry *act;
struct net_device *target;
struct otx2_nic *priv;
u32 burst, mark = 0;
u8 nr_police = 0;
bool pps = false;
u64 rate;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
int i;
if (!flow_action_has_entries(flow_action)) {
NL_SET_ERR_MSG_MOD(extack, "no tc actions specified");
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return -EINVAL;
}
flow_action_for_each(i, act, flow_action) {
switch (act->id) {
case FLOW_ACTION_DROP:
req->op = NIX_RX_ACTIONOP_DROP;
return 0;
case FLOW_ACTION_ACCEPT:
req->op = NIX_RX_ACTION_DEFAULT;
return 0;
case FLOW_ACTION_REDIRECT_INGRESS:
target = act->dev;
priv = netdev_priv(target);
/* npc_install_flow_req doesn't support passing a target pcifunc */
if (rvu_get_pf(nic->pcifunc) != rvu_get_pf(priv->pcifunc)) {
NL_SET_ERR_MSG_MOD(extack,
"can't redirect to other pf/vf");
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return -EOPNOTSUPP;
}
req->vf = priv->pcifunc & RVU_PFVF_FUNC_MASK;
req->op = NIX_RX_ACTION_DEFAULT;
return 0;
case FLOW_ACTION_VLAN_POP:
req->vtag0_valid = true;
/* use RX_VTAG_TYPE7 which is initialized to strip vlan tag */
req->vtag0_type = NIX_AF_LFX_RX_VTAG_TYPE7;
break;
case FLOW_ACTION_POLICE:
/* Ingress ratelimiting is not supported on OcteonTx2 */
if (is_dev_otx2(nic->pdev)) {
NL_SET_ERR_MSG_MOD(extack,
"Ingress policing not supported on this platform");
return -EOPNOTSUPP;
}
if (act->police.rate_bytes_ps > 0) {
rate = act->police.rate_bytes_ps * 8;
burst = act->police.burst;
} else if (act->police.rate_pkt_ps > 0) {
/* The algorithm used to calculate rate
* mantissa, exponent values for a given token
* rate (token can be byte or packet) requires
* token rate to be mutiplied by 8.
*/
rate = act->police.rate_pkt_ps * 8;
burst = act->police.burst_pkt;
pps = true;
}
nr_police++;
break;
case FLOW_ACTION_MARK:
mark = act->mark;
break;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
default:
return -EOPNOTSUPP;
}
}
if (nr_police > 1) {
NL_SET_ERR_MSG_MOD(extack,
"rate limit police offload requires a single action");
return -EOPNOTSUPP;
}
if (nr_police)
return otx2_tc_act_set_police(nic, node, f, rate, burst,
mark, req, pps);
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return 0;
}
static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
struct flow_cls_offload *f,
struct npc_install_flow_req *req)
{
struct netlink_ext_ack *extack = f->common.extack;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
struct flow_msg *flow_spec = &req->packet;
struct flow_msg *flow_mask = &req->mask;
struct flow_dissector *dissector;
struct flow_rule *rule;
u8 ip_proto = 0;
rule = flow_cls_offload_flow_rule(f);
dissector = rule->match.dissector;
if ((dissector->used_keys &
~(BIT(FLOW_DISSECTOR_KEY_CONTROL) |
BIT(FLOW_DISSECTOR_KEY_BASIC) |
BIT(FLOW_DISSECTOR_KEY_ETH_ADDRS) |
BIT(FLOW_DISSECTOR_KEY_VLAN) |
BIT(FLOW_DISSECTOR_KEY_IPV4_ADDRS) |
BIT(FLOW_DISSECTOR_KEY_IPV6_ADDRS) |
BIT(FLOW_DISSECTOR_KEY_PORTS) |
BIT(FLOW_DISSECTOR_KEY_IP)))) {
netdev_info(nic->netdev, "unsupported flow used key 0x%x",
dissector->used_keys);
return -EOPNOTSUPP;
}
if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) {
struct flow_match_basic match;
flow_rule_match_basic(rule, &match);
/* All EtherTypes can be matched, no hw limitation */
flow_spec->etype = match.key->n_proto;
flow_mask->etype = match.mask->n_proto;
req->features |= BIT_ULL(NPC_ETYPE);
if (match.mask->ip_proto &&
(match.key->ip_proto != IPPROTO_TCP &&
match.key->ip_proto != IPPROTO_UDP &&
match.key->ip_proto != IPPROTO_SCTP &&
match.key->ip_proto != IPPROTO_ICMP &&
match.key->ip_proto != IPPROTO_ICMPV6)) {
netdev_info(nic->netdev,
"ip_proto=0x%x not supported\n",
match.key->ip_proto);
return -EOPNOTSUPP;
}
if (match.mask->ip_proto)
ip_proto = match.key->ip_proto;
if (ip_proto == IPPROTO_UDP)
req->features |= BIT_ULL(NPC_IPPROTO_UDP);
else if (ip_proto == IPPROTO_TCP)
req->features |= BIT_ULL(NPC_IPPROTO_TCP);
else if (ip_proto == IPPROTO_SCTP)
req->features |= BIT_ULL(NPC_IPPROTO_SCTP);
else if (ip_proto == IPPROTO_ICMP)
req->features |= BIT_ULL(NPC_IPPROTO_ICMP);
else if (ip_proto == IPPROTO_ICMPV6)
req->features |= BIT_ULL(NPC_IPPROTO_ICMP6);
}
if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
struct flow_match_eth_addrs match;
flow_rule_match_eth_addrs(rule, &match);
if (!is_zero_ether_addr(match.mask->src)) {
NL_SET_ERR_MSG_MOD(extack, "src mac match not supported");
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return -EOPNOTSUPP;
}
if (!is_zero_ether_addr(match.mask->dst)) {
ether_addr_copy(flow_spec->dmac, (u8 *)&match.key->dst);
ether_addr_copy(flow_mask->dmac,
(u8 *)&match.mask->dst);
req->features |= BIT_ULL(NPC_DMAC);
}
}
if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IP)) {
struct flow_match_ip match;
flow_rule_match_ip(rule, &match);
if ((ntohs(flow_spec->etype) != ETH_P_IP) &&
match.mask->tos) {
NL_SET_ERR_MSG_MOD(extack, "tos not supported");
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return -EOPNOTSUPP;
}
if (match.mask->ttl) {
NL_SET_ERR_MSG_MOD(extack, "ttl not supported");
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return -EOPNOTSUPP;
}
flow_spec->tos = match.key->tos;
flow_mask->tos = match.mask->tos;
req->features |= BIT_ULL(NPC_TOS);
}
if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_VLAN)) {
struct flow_match_vlan match;
u16 vlan_tci, vlan_tci_mask;
flow_rule_match_vlan(rule, &match);
if (ntohs(match.key->vlan_tpid) != ETH_P_8021Q) {
netdev_err(nic->netdev, "vlan tpid 0x%x not supported\n",
ntohs(match.key->vlan_tpid));
return -EOPNOTSUPP;
}
if (match.mask->vlan_id ||
match.mask->vlan_dei ||
match.mask->vlan_priority) {
vlan_tci = match.key->vlan_id |
match.key->vlan_dei << 12 |
match.key->vlan_priority << 13;
vlan_tci_mask = match.mask->vlan_id |
match.mask->vlan_dei << 12 |
match.mask->vlan_priority << 13;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
flow_spec->vlan_tci = htons(vlan_tci);
flow_mask->vlan_tci = htons(vlan_tci_mask);
req->features |= BIT_ULL(NPC_OUTER_VID);
}
}
if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV4_ADDRS)) {
struct flow_match_ipv4_addrs match;
flow_rule_match_ipv4_addrs(rule, &match);
flow_spec->ip4dst = match.key->dst;
flow_mask->ip4dst = match.mask->dst;
req->features |= BIT_ULL(NPC_DIP_IPV4);
flow_spec->ip4src = match.key->src;
flow_mask->ip4src = match.mask->src;
req->features |= BIT_ULL(NPC_SIP_IPV4);
} else if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV6_ADDRS)) {
struct flow_match_ipv6_addrs match;
flow_rule_match_ipv6_addrs(rule, &match);
if (ipv6_addr_loopback(&match.key->dst) ||
ipv6_addr_loopback(&match.key->src)) {
NL_SET_ERR_MSG_MOD(extack,
"Flow matching IPv6 loopback addr not supported");
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return -EOPNOTSUPP;
}
if (!ipv6_addr_any(&match.mask->dst)) {
memcpy(&flow_spec->ip6dst,
(struct in6_addr *)&match.key->dst,
sizeof(flow_spec->ip6dst));
memcpy(&flow_mask->ip6dst,
(struct in6_addr *)&match.mask->dst,
sizeof(flow_spec->ip6dst));
req->features |= BIT_ULL(NPC_DIP_IPV6);
}
if (!ipv6_addr_any(&match.mask->src)) {
memcpy(&flow_spec->ip6src,
(struct in6_addr *)&match.key->src,
sizeof(flow_spec->ip6src));
memcpy(&flow_mask->ip6src,
(struct in6_addr *)&match.mask->src,
sizeof(flow_spec->ip6src));
req->features |= BIT_ULL(NPC_SIP_IPV6);
}
}
if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_PORTS)) {
struct flow_match_ports match;
flow_rule_match_ports(rule, &match);
flow_spec->dport = match.key->dst;
flow_mask->dport = match.mask->dst;
if (ip_proto == IPPROTO_UDP)
req->features |= BIT_ULL(NPC_DPORT_UDP);
else if (ip_proto == IPPROTO_TCP)
req->features |= BIT_ULL(NPC_DPORT_TCP);
else if (ip_proto == IPPROTO_SCTP)
req->features |= BIT_ULL(NPC_DPORT_SCTP);
flow_spec->sport = match.key->src;
flow_mask->sport = match.mask->src;
if (ip_proto == IPPROTO_UDP)
req->features |= BIT_ULL(NPC_SPORT_UDP);
else if (ip_proto == IPPROTO_TCP)
req->features |= BIT_ULL(NPC_SPORT_TCP);
else if (ip_proto == IPPROTO_SCTP)
req->features |= BIT_ULL(NPC_SPORT_SCTP);
}
return otx2_tc_parse_actions(nic, &rule->action, req, f, node);
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
}
static int otx2_del_mcam_flow_entry(struct otx2_nic *nic, u16 entry)
{
struct npc_delete_flow_req *req;
int err;
mutex_lock(&nic->mbox.lock);
req = otx2_mbox_alloc_msg_npc_delete_flow(&nic->mbox);
if (!req) {
mutex_unlock(&nic->mbox.lock);
return -ENOMEM;
}
req->entry = entry;
/* Send message to AF */
err = otx2_sync_mbox_msg(&nic->mbox);
if (err) {
netdev_err(nic->netdev, "Failed to delete MCAM flow entry %d\n",
entry);
mutex_unlock(&nic->mbox.lock);
return -EFAULT;
}
mutex_unlock(&nic->mbox.lock);
return 0;
}
static int otx2_tc_del_flow(struct otx2_nic *nic,
struct flow_cls_offload *tc_flow_cmd)
{
struct otx2_flow_config *flow_cfg = nic->flow_cfg;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
struct otx2_tc_info *tc_info = &nic->tc_info;
struct otx2_tc_flow *flow_node;
int err;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
flow_node = rhashtable_lookup_fast(&tc_info->flow_table,
&tc_flow_cmd->cookie,
tc_info->flow_ht_params);
if (!flow_node) {
netdev_err(nic->netdev, "tc flow not found for cookie 0x%lx\n",
tc_flow_cmd->cookie);
return -EINVAL;
}
if (flow_node->is_act_police) {
mutex_lock(&nic->mbox.lock);
err = cn10k_map_unmap_rq_policer(nic, flow_node->rq,
flow_node->leaf_profile, false);
if (err)
netdev_err(nic->netdev,
"Unmapping RQ %d & profile %d failed\n",
flow_node->rq, flow_node->leaf_profile);
err = cn10k_free_leaf_profile(nic, flow_node->leaf_profile);
if (err)
netdev_err(nic->netdev,
"Unable to free leaf bandwidth profile(%d)\n",
flow_node->leaf_profile);
__clear_bit(flow_node->rq, &nic->rq_bmap);
mutex_unlock(&nic->mbox.lock);
}
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
otx2_del_mcam_flow_entry(nic, flow_node->entry);
WARN_ON(rhashtable_remove_fast(&nic->tc_info.flow_table,
&flow_node->node,
nic->tc_info.flow_ht_params));
kfree_rcu(flow_node, rcu);
clear_bit(flow_node->bitpos, tc_info->tc_entries_bitmap);
flow_cfg->nr_flows--;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return 0;
}
static int otx2_tc_add_flow(struct otx2_nic *nic,
struct flow_cls_offload *tc_flow_cmd)
{
struct netlink_ext_ack *extack = tc_flow_cmd->common.extack;
struct otx2_flow_config *flow_cfg = nic->flow_cfg;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
struct otx2_tc_info *tc_info = &nic->tc_info;
struct otx2_tc_flow *new_node, *old_node;
struct npc_install_flow_req *req, dummy;
int rc, err;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
if (!(nic->flags & OTX2_FLAG_TC_FLOWER_SUPPORT))
return -ENOMEM;
if (bitmap_full(tc_info->tc_entries_bitmap, flow_cfg->max_flows)) {
NL_SET_ERR_MSG_MOD(extack,
"Free MCAM entry not available to add the flow");
return -ENOMEM;
}
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
/* allocate memory for the new flow and it's node */
new_node = kzalloc(sizeof(*new_node), GFP_KERNEL);
if (!new_node)
return -ENOMEM;
spin_lock_init(&new_node->lock);
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
new_node->cookie = tc_flow_cmd->cookie;
memset(&dummy, 0, sizeof(struct npc_install_flow_req));
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
rc = otx2_tc_prepare_flow(nic, new_node, tc_flow_cmd, &dummy);
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
if (rc) {
kfree_rcu(new_node, rcu);
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return rc;
}
/* If a flow exists with the same cookie, delete it */
old_node = rhashtable_lookup_fast(&tc_info->flow_table,
&tc_flow_cmd->cookie,
tc_info->flow_ht_params);
if (old_node)
otx2_tc_del_flow(nic, tc_flow_cmd);
mutex_lock(&nic->mbox.lock);
req = otx2_mbox_alloc_msg_npc_install_flow(&nic->mbox);
if (!req) {
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
mutex_unlock(&nic->mbox.lock);
rc = -ENOMEM;
goto free_leaf;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
}
memcpy(&dummy.hdr, &req->hdr, sizeof(struct mbox_msghdr));
memcpy(req, &dummy, sizeof(struct npc_install_flow_req));
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
new_node->bitpos = find_first_zero_bit(tc_info->tc_entries_bitmap,
flow_cfg->max_flows);
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
req->channel = nic->hw.rx_chan_base;
req->entry = flow_cfg->flow_ent[flow_cfg->max_flows - new_node->bitpos - 1];
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
req->intf = NIX_INTF_RX;
req->set_cntr = 1;
new_node->entry = req->entry;
/* Send message to AF */
rc = otx2_sync_mbox_msg(&nic->mbox);
if (rc) {
NL_SET_ERR_MSG_MOD(extack, "Failed to install MCAM flow entry");
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
mutex_unlock(&nic->mbox.lock);
kfree_rcu(new_node, rcu);
goto free_leaf;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
}
mutex_unlock(&nic->mbox.lock);
/* add new flow to flow-table */
rc = rhashtable_insert_fast(&nic->tc_info.flow_table, &new_node->node,
nic->tc_info.flow_ht_params);
if (rc) {
otx2_del_mcam_flow_entry(nic, req->entry);
kfree_rcu(new_node, rcu);
goto free_leaf;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
}
set_bit(new_node->bitpos, tc_info->tc_entries_bitmap);
flow_cfg->nr_flows++;
return 0;
free_leaf:
if (new_node->is_act_police) {
mutex_lock(&nic->mbox.lock);
err = cn10k_map_unmap_rq_policer(nic, new_node->rq,
new_node->leaf_profile, false);
if (err)
netdev_err(nic->netdev,
"Unmapping RQ %d & profile %d failed\n",
new_node->rq, new_node->leaf_profile);
err = cn10k_free_leaf_profile(nic, new_node->leaf_profile);
if (err)
netdev_err(nic->netdev,
"Unable to free leaf bandwidth profile(%d)\n",
new_node->leaf_profile);
__clear_bit(new_node->rq, &nic->rq_bmap);
mutex_unlock(&nic->mbox.lock);
}
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return rc;
}
static int otx2_tc_get_flow_stats(struct otx2_nic *nic,
struct flow_cls_offload *tc_flow_cmd)
{
struct otx2_tc_info *tc_info = &nic->tc_info;
struct npc_mcam_get_stats_req *req;
struct npc_mcam_get_stats_rsp *rsp;
struct otx2_tc_flow_stats *stats;
struct otx2_tc_flow *flow_node;
int err;
flow_node = rhashtable_lookup_fast(&tc_info->flow_table,
&tc_flow_cmd->cookie,
tc_info->flow_ht_params);
if (!flow_node) {
netdev_info(nic->netdev, "tc flow not found for cookie %lx",
tc_flow_cmd->cookie);
return -EINVAL;
}
mutex_lock(&nic->mbox.lock);
req = otx2_mbox_alloc_msg_npc_mcam_entry_stats(&nic->mbox);
if (!req) {
mutex_unlock(&nic->mbox.lock);
return -ENOMEM;
}
req->entry = flow_node->entry;
err = otx2_sync_mbox_msg(&nic->mbox);
if (err) {
netdev_err(nic->netdev, "Failed to get stats for MCAM flow entry %d\n",
req->entry);
mutex_unlock(&nic->mbox.lock);
return -EFAULT;
}
rsp = (struct npc_mcam_get_stats_rsp *)otx2_mbox_get_rsp
(&nic->mbox.mbox, 0, &req->hdr);
if (IS_ERR(rsp)) {
mutex_unlock(&nic->mbox.lock);
return PTR_ERR(rsp);
}
mutex_unlock(&nic->mbox.lock);
if (!rsp->stat_ena)
return -EINVAL;
stats = &flow_node->stats;
spin_lock(&flow_node->lock);
flow_stats_update(&tc_flow_cmd->stats, 0x0, rsp->stat - stats->pkts, 0x0, 0x0,
FLOW_ACTION_HW_STATS_IMMEDIATE);
stats->pkts = rsp->stat;
spin_unlock(&flow_node->lock);
return 0;
}
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
static int otx2_setup_tc_cls_flower(struct otx2_nic *nic,
struct flow_cls_offload *cls_flower)
{
switch (cls_flower->command) {
case FLOW_CLS_REPLACE:
return otx2_tc_add_flow(nic, cls_flower);
case FLOW_CLS_DESTROY:
return otx2_tc_del_flow(nic, cls_flower);
case FLOW_CLS_STATS:
return otx2_tc_get_flow_stats(nic, cls_flower);
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
default:
return -EOPNOTSUPP;
}
}
static int otx2_tc_ingress_matchall_install(struct otx2_nic *nic,
struct tc_cls_matchall_offload *cls)
{
struct netlink_ext_ack *extack = cls->common.extack;
struct flow_action *actions = &cls->rule->action;
struct flow_action_entry *entry;
u64 rate;
int err;
err = otx2_tc_validate_flow(nic, actions, extack);
if (err)
return err;
if (nic->flags & OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED) {
NL_SET_ERR_MSG_MOD(extack,
"Only one ingress MATCHALL ratelimitter can be offloaded");
return -ENOMEM;
}
entry = &cls->rule->action.entries[0];
switch (entry->id) {
case FLOW_ACTION_POLICE:
/* Ingress ratelimiting is not supported on OcteonTx2 */
if (is_dev_otx2(nic->pdev)) {
NL_SET_ERR_MSG_MOD(extack,
"Ingress policing not supported on this platform");
return -EOPNOTSUPP;
}
err = cn10k_alloc_matchall_ipolicer(nic);
if (err)
return err;
/* Convert to bits per second */
rate = entry->police.rate_bytes_ps * 8;
err = cn10k_set_matchall_ipolicer_rate(nic, entry->police.burst, rate);
if (err)
return err;
nic->flags |= OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED;
break;
default:
NL_SET_ERR_MSG_MOD(extack,
"Only police action supported with Ingress MATCHALL offload");
return -EOPNOTSUPP;
}
return 0;
}
static int otx2_tc_ingress_matchall_delete(struct otx2_nic *nic,
struct tc_cls_matchall_offload *cls)
{
struct netlink_ext_ack *extack = cls->common.extack;
int err;
if (nic->flags & OTX2_FLAG_INTF_DOWN) {
NL_SET_ERR_MSG_MOD(extack, "Interface not initialized");
return -EINVAL;
}
err = cn10k_free_matchall_ipolicer(nic);
nic->flags &= ~OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED;
return err;
}
static int otx2_setup_tc_ingress_matchall(struct otx2_nic *nic,
struct tc_cls_matchall_offload *cls_matchall)
{
switch (cls_matchall->command) {
case TC_CLSMATCHALL_REPLACE:
return otx2_tc_ingress_matchall_install(nic, cls_matchall);
case TC_CLSMATCHALL_DESTROY:
return otx2_tc_ingress_matchall_delete(nic, cls_matchall);
case TC_CLSMATCHALL_STATS:
default:
break;
}
return -EOPNOTSUPP;
}
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
static int otx2_setup_tc_block_ingress_cb(enum tc_setup_type type,
void *type_data, void *cb_priv)
{
struct otx2_nic *nic = cb_priv;
if (!tc_cls_can_offload_and_chain0(nic->netdev, type_data))
return -EOPNOTSUPP;
switch (type) {
case TC_SETUP_CLSFLOWER:
return otx2_setup_tc_cls_flower(nic, type_data);
case TC_SETUP_CLSMATCHALL:
return otx2_setup_tc_ingress_matchall(nic, type_data);
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
default:
break;
}
return -EOPNOTSUPP;
}
static int otx2_setup_tc_egress_matchall(struct otx2_nic *nic,
struct tc_cls_matchall_offload *cls_matchall)
{
switch (cls_matchall->command) {
case TC_CLSMATCHALL_REPLACE:
return otx2_tc_egress_matchall_install(nic, cls_matchall);
case TC_CLSMATCHALL_DESTROY:
return otx2_tc_egress_matchall_delete(nic, cls_matchall);
case TC_CLSMATCHALL_STATS:
default:
break;
}
return -EOPNOTSUPP;
}
static int otx2_setup_tc_block_egress_cb(enum tc_setup_type type,
void *type_data, void *cb_priv)
{
struct otx2_nic *nic = cb_priv;
if (!tc_cls_can_offload_and_chain0(nic->netdev, type_data))
return -EOPNOTSUPP;
switch (type) {
case TC_SETUP_CLSMATCHALL:
return otx2_setup_tc_egress_matchall(nic, type_data);
default:
break;
}
return -EOPNOTSUPP;
}
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
static LIST_HEAD(otx2_block_cb_list);
static int otx2_setup_tc_block(struct net_device *netdev,
struct flow_block_offload *f)
{
struct otx2_nic *nic = netdev_priv(netdev);
flow_setup_cb_t *cb;
bool ingress;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
if (f->block_shared)
return -EOPNOTSUPP;
if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS) {
cb = otx2_setup_tc_block_ingress_cb;
ingress = true;
} else if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_EGRESS) {
cb = otx2_setup_tc_block_egress_cb;
ingress = false;
} else {
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return -EOPNOTSUPP;
}
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
return flow_block_cb_setup_simple(f, &otx2_block_cb_list, cb,
nic, nic, ingress);
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
}
int otx2_setup_tc(struct net_device *netdev, enum tc_setup_type type,
void *type_data)
{
switch (type) {
case TC_SETUP_BLOCK:
return otx2_setup_tc_block(netdev, type_data);
default:
return -EOPNOTSUPP;
}
}
static const struct rhashtable_params tc_flow_ht_params = {
.head_offset = offsetof(struct otx2_tc_flow, node),
.key_offset = offsetof(struct otx2_tc_flow, cookie),
.key_len = sizeof(((struct otx2_tc_flow *)0)->cookie),
.automatic_shrinking = true,
};
int otx2_init_tc(struct otx2_nic *nic)
{
struct otx2_tc_info *tc = &nic->tc_info;
int err;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
/* Exclude receive queue 0 being used for police action */
set_bit(0, &nic->rq_bmap);
if (!nic->flow_cfg) {
netdev_err(nic->netdev,
"Can't init TC, nic->flow_cfg is not setup\n");
return -EINVAL;
}
err = otx2_tc_alloc_ent_bitmap(nic);
if (err)
return err;
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
tc->flow_ht_params = tc_flow_ht_params;
return rhashtable_init(&tc->flow_table, &tc->flow_ht_params);
}
void otx2_shutdown_tc(struct otx2_nic *nic)
{
struct otx2_tc_info *tc = &nic->tc_info;
kfree(tc->tc_entries_bitmap);
octeontx2-pf: Add tc flower hardware offload on ingress traffic This patch adds support for tc flower hardware offload on ingress traffic. Since the tc-flower filter rules use the same set of MCAM rules as the n-tuple filters, the n-tuple filters and tc flower rules are mutually exclusive. When one of the feature is enabled using ethtool, the other feature is disabled in the driver. By default the driver enables n-tuple filters during initialization. The following flow keys are supported. -> Ethernet: dst_mac -> L2 proto: all protocols -> VLAN (802.1q): vlan_id/vlan_prio -> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos -> IPv6: ip_proto{icmpv6} -> L4(tcp/udp/sctp): dst_port/src_port The following flow actions are supported. -> drop -> accept -> redirect -> vlan pop The flow action supports multiple actions when vlan pop is specified as the first action. The redirect action supports redirecting to the PF/VF of same PCI device. Redirecting to other PCI NIX devices is not supported. Example #1: Add a tc filter rule to drop UDP traffic with dest port 80 # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \ udp dst_port 80 action drop Example #2: Add a tc filter rule to redirect ingress traffic on eth0 with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr. # ethtool -K eth0 hw-tc-offload on # tc qdisc add dev eth0 ingress # tc filter add dev eth0 parent ffff: protocol 802.1Q flower \ vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \ ingress redirect dev eth6 Example #3: List the ingress filter rules # tc -s filter show dev eth4 ingress Example #4: Delete tc flower filter rule with handle 0x1 # tc filter del dev eth0 ingress protocol ip pref 49152 \ handle 1 flower Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 10:02:13 +00:00
rhashtable_destroy(&tc->flow_table);
}