leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
049ec1b5a7
linux/net/tipc/socket.h

64 lines
2.7 KiB
C
Raw Normal View History

tipc: aggregate port structure into socket structure After the removal of the tipc native API the relation between a tipc_port and its API types is strictly one-to-one, i.e, the latter can now only be a socket API. There is therefore no need to allocate struct tipc_port and struct sock independently. In this commit, we aggregate struct tipc_port into struct tipc_sock, hence saving both CPU cycles and structure complexity. There are no functional changes in this commit, except for the elimination of the separate allocation/freeing of tipc_port. All other changes are just adaptatons to the new data structure. This commit also opens up for further code simplifications and code volume reduction, something we will do in later commits. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:31:09 +00:00
/* net/tipc/socket.h: Include file for TIPC socket code
*
tipc: redesign connection-level flow control There are two flow control mechanisms in TIPC; one at link level that handles network congestion, burst control, and retransmission, and one at connection level which' only remaining task is to prevent overflow in the receiving socket buffer. In TIPC, the latter task has to be solved end-to-end because messages can not be thrown away once they have been accepted and delivered upwards from the link layer, i.e, we can never permit the receive buffer to overflow. Currently, this algorithm is message based. A counter in the receiving socket keeps track of number of consumed messages, and sends a dedicated acknowledge message back to the sender for each 256 consumed message. A counter at the sending end keeps track of the sent, not yet acknowledged messages, and blocks the sender if this number ever reaches 512 unacknowledged messages. When the missing acknowledge arrives, the socket is then woken up for renewed transmission. This works well for keeping the message flow running, as it almost never happens that a sender socket is blocked this way. A problem with the current mechanism is that it potentially is very memory consuming. Since we don't distinguish between small and large messages, we have to dimension the socket receive buffer according to a worst-case of both. I.e., the window size must be chosen large enough to sustain a reasonable throughput even for the smallest messages, while we must still consider a scenario where all messages are of maximum size. Hence, the current fix window size of 512 messages and a maximum message size of 66k results in a receive buffer of 66 MB when truesize(66k) = 131k is taken into account. It is possible to do much better. This commit introduces an algorithm where we instead use 1024-byte blocks as base unit. This unit, always rounded upwards from the actual message size, is used when we advertise windows as well as when we count and acknowledge transmitted data. The advertised window is based on the configured receive buffer size in such a way that even the worst-case truesize/msgsize ratio always is covered. Since the smallest possible message size (from a flow control viewpoint) now is 1024 bytes, we can safely assume this ratio to be less than four, which is the value we are now using. This way, we have been able to reduce the default receive buffer size from 66 MB to 2 MB with maintained performance. In order to keep this solution backwards compatible, we introduce a new capability bit in the discovery protocol, and use this throughout the message sending/reception path to always select the right unit. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02 15:58:47 +00:00
* Copyright (c) 2014-2016, Ericsson AB
tipc: aggregate port structure into socket structure After the removal of the tipc native API the relation between a tipc_port and its API types is strictly one-to-one, i.e, the latter can now only be a socket API. There is therefore no need to allocate struct tipc_port and struct sock independently. In this commit, we aggregate struct tipc_port into struct tipc_sock, hence saving both CPU cycles and structure complexity. There are no functional changes in this commit, except for the elimination of the separate allocation/freeing of tipc_port. All other changes are just adaptatons to the new data structure. This commit also opens up for further code simplifications and code volume reduction, something we will do in later commits. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:31:09 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _TIPC_SOCK_H
#define _TIPC_SOCK_H
#include <net/sock.h>
tipc: add sock dump to new netlink api Add TIPC_NL_SOCK_GET command to the new tipc netlink API. This command supports dumping of all available sockets with their associated connection or publication(s). It could be extended to reply with a single socket if the NLM_F_DUMP isn't set. The information about a socket includes reference, address, connection information / publication information. Netlink logical layout of response message: -> socket -> reference -> address [ -> connection -> node -> socket [ -> connected flag -> type -> instance ] ] [ -> publication flag ] Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20 09:29:10 +00:00
#include <net/genetlink.h>
tipc: aggregate port structure into socket structure After the removal of the tipc native API the relation between a tipc_port and its API types is strictly one-to-one, i.e, the latter can now only be a socket API. There is therefore no need to allocate struct tipc_port and struct sock independently. In this commit, we aggregate struct tipc_port into struct tipc_sock, hence saving both CPU cycles and structure complexity. There are no functional changes in this commit, except for the elimination of the separate allocation/freeing of tipc_port. All other changes are just adaptatons to the new data structure. This commit also opens up for further code simplifications and code volume reduction, something we will do in later commits. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:31:09 +00:00
tipc: redesign connection-level flow control There are two flow control mechanisms in TIPC; one at link level that handles network congestion, burst control, and retransmission, and one at connection level which' only remaining task is to prevent overflow in the receiving socket buffer. In TIPC, the latter task has to be solved end-to-end because messages can not be thrown away once they have been accepted and delivered upwards from the link layer, i.e, we can never permit the receive buffer to overflow. Currently, this algorithm is message based. A counter in the receiving socket keeps track of number of consumed messages, and sends a dedicated acknowledge message back to the sender for each 256 consumed message. A counter at the sending end keeps track of the sent, not yet acknowledged messages, and blocks the sender if this number ever reaches 512 unacknowledged messages. When the missing acknowledge arrives, the socket is then woken up for renewed transmission. This works well for keeping the message flow running, as it almost never happens that a sender socket is blocked this way. A problem with the current mechanism is that it potentially is very memory consuming. Since we don't distinguish between small and large messages, we have to dimension the socket receive buffer according to a worst-case of both. I.e., the window size must be chosen large enough to sustain a reasonable throughput even for the smallest messages, while we must still consider a scenario where all messages are of maximum size. Hence, the current fix window size of 512 messages and a maximum message size of 66k results in a receive buffer of 66 MB when truesize(66k) = 131k is taken into account. It is possible to do much better. This commit introduces an algorithm where we instead use 1024-byte blocks as base unit. This unit, always rounded upwards from the actual message size, is used when we advertise windows as well as when we count and acknowledge transmitted data. The advertised window is based on the configured receive buffer size in such a way that even the worst-case truesize/msgsize ratio always is covered. Since the smallest possible message size (from a flow control viewpoint) now is 1024 bytes, we can safely assume this ratio to be less than four, which is the value we are now using. This way, we have been able to reduce the default receive buffer size from 66 MB to 2 MB with maintained performance. In order to keep this solution backwards compatible, we introduce a new capability bit in the discovery protocol, and use this throughout the message sending/reception path to always select the right unit. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02 15:58:47 +00:00
/* Compatibility values for deprecated message based flow control */
#define FLOWCTL_MSG_WIN 512
#define FLOWCTL_MSG_LIM ((FLOWCTL_MSG_WIN * 2 + 1) * SKB_TRUESIZE(MAX_MSG_SIZE))
#define FLOWCTL_BLK_SZ 1024
/* Socket receive buffer sizes */
#define RCVBUF_MIN (FLOWCTL_BLK_SZ * 512)
#define RCVBUF_DEF (FLOWCTL_BLK_SZ * 1024 * 2)
#define RCVBUF_MAX (FLOWCTL_BLK_SZ * 1024 * 16)
tipc: cleanup core.c and core.h files Only the works of initializing and shutting down tipc module are done in core.h and core.c files, so all stuffs which are not closely associated with the two tasks should be moved to appropriate places. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 07:27:01 +00:00
int tipc_socket_init(void);
void tipc_socket_stop(void);
tipc: clean up socket layer message reception When a message is received in a socket, one of the call chains tipc_sk_rcv()->tipc_sk_enqueue()->filter_rcv()(->tipc_sk_proto_rcv()) or tipc_sk_backlog_rcv()->filter_rcv()(->tipc_sk_proto_rcv()) are followed. At each of these levels we may encounter situations where the message may need to be rejected, or a new message produced for transfer back to the sender. Despite recent improvements, the current code for doing this is perceived as awkward and hard to follow. Leveraging the two previous commits in this series, we now introduce a more uniform handling of such situations. We let each of the functions in the chain itself produce/reverse the message to be returned to the sender, but also perform the actual forwarding. This simplifies the necessary logics within each function. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-22 14:11:20 +00:00
void tipc_sk_rcv(struct net *net, struct sk_buff_head *inputq);
tipc: eliminate race condition at multicast reception In a previous commit in this series we resolved a race problem during unicast message reception. Here, we resolve the same problem at multicast reception. We apply the same technique: an input queue serializing the delivery of arriving buffers. The main difference is that here we do it in two steps. First, the broadcast link feeds arriving buffers into the tail of an arrival queue, which head is consumed at the socket level, and where destination lookup is performed. Second, if the lookup is successful, the resulting buffer clones are fed into a second queue, the input queue. This queue is consumed at reception in the socket just like in the unicast case. Both queues are protected by the same lock, -the one of the input queue. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 13:36:44 +00:00
void tipc_sk_mcast_rcv(struct net *net, struct sk_buff_head *arrvq,
struct sk_buff_head *inputq);
tipc: make tipc socket support net namespace Now tipc socket table is statically allocated as a global variable. Through it, we can look up one socket instance with port ID, insert a new socket instance to the table, and delete a socket from the table. But when tipc supports net namespace, each namespace must own its specific socket table. So the global variable of socket table must be redefined in tipc_net structure. As a concequence, a new socket table will be allocated when a new namespace is created, and a socket table will be deallocated when namespace is destroyed. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 07:27:08 +00:00
void tipc_sk_reinit(struct net *net);
int tipc_sk_rht_init(struct net *net);
void tipc_sk_rht_destroy(struct net *net);
tipc: add sock dump to new netlink api Add TIPC_NL_SOCK_GET command to the new tipc netlink API. This command supports dumping of all available sockets with their associated connection or publication(s). It could be extended to reply with a single socket if the NLM_F_DUMP isn't set. The information about a socket includes reference, address, connection information / publication information. Netlink logical layout of response message: -> socket -> reference -> address [ -> connection -> node -> socket [ -> connected flag -> type -> instance ] ] [ -> publication flag ] Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20 09:29:10 +00:00
int tipc_nl_sk_dump(struct sk_buff *skb, struct netlink_callback *cb);
tipc: add publication dump to new netlink api Add TIPC_NL_PUBL_GET command to the new tipc netlink API. This command supports dumping of all publications for a specific socket. Netlink logical layout of request message: -> socket -> reference Netlink logical layout of response message: -> publication -> type -> lower -> upper Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20 09:29:11 +00:00
int tipc_nl_publ_dump(struct sk_buff *skb, struct netlink_callback *cb);
tipc: add new functions for multicast and broadcast distribution We add a new broadcast link transmit function in bclink.c and a new receive function in socket.c. The purpose is to move the branching between external and internal destination down to the link layer, just as we have done with unicast in earlier commits. We also make use of the new link-independent fragmentation support that was introduced in an earlier commit series. This gives a shorter and simpler code path, and makes it possible to obtain copy-free buffer delivery to all node local destination sockets. The new transmission code is added in parallel with the existing one, and will be used by the socket multicast send function in the next commit in this series. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 00:41:00 +00:00
tipc: aggregate port structure into socket structure After the removal of the tipc native API the relation between a tipc_port and its API types is strictly one-to-one, i.e, the latter can now only be a socket API. There is therefore no need to allocate struct tipc_port and struct sock independently. In this commit, we aggregate struct tipc_port into struct tipc_sock, hence saving both CPU cycles and structure complexity. There are no functional changes in this commit, except for the elimination of the separate allocation/freeing of tipc_port. All other changes are just adaptatons to the new data structure. This commit also opens up for further code simplifications and code volume reduction, something we will do in later commits. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:31:09 +00:00
#endif
Reference in New Issue Copy Permalink