diff --git a/Pixel3XL/Library/InMemorySerialPortLib/BaseSerialPortLibNull.c b/Pixel3XL/Library/InMemorySerialPortLib/BaseSerialPortLibNull.c
new file mode 100644
index 0000000..b1c3b7a
--- /dev/null
+++ b/Pixel3XL/Library/InMemorySerialPortLib/BaseSerialPortLibNull.c
@@ -0,0 +1,197 @@
+/** @file
+  Null Serial Port library instance with empty functions.
+
+  Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php.
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+#include <Base.h>
+#include <Library/SerialPortLib.h>
+
+/**
+  Initialize the serial device hardware.
+
+  If no initialization is required, then return RETURN_SUCCESS.
+  If the serial device was successfully initialized, then return RETURN_SUCCESS.
+  If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.
+
+  @retval RETURN_SUCCESS        The serial device was initialized.
+  @retval RETURN_DEVICE_ERROR   The serial device could not be initialized.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortInitialize (
+  VOID
+  )
+{
+  return RETURN_SUCCESS;
+}
+
+/**
+  Write data from buffer to serial device.
+
+  Writes NumberOfBytes data bytes from Buffer to the serial device.
+  The number of bytes actually written to the serial device is returned.
+  If the return value is less than NumberOfBytes, then the write operation failed.
+  If Buffer is NULL, then ASSERT().
+  If NumberOfBytes is zero, then return 0.
+
+  @param  Buffer           The pointer to the data buffer to be written.
+  @param  NumberOfBytes    The number of bytes to written to the serial device.
+
+  @retval 0                NumberOfBytes is 0.
+  @retval >0               The number of bytes written to the serial device.
+                           If this value is less than NumberOfBytes, then the write operation failed.
+
+**/
+UINTN
+EFIAPI
+SerialPortWrite (
+  IN UINT8     *Buffer,
+  IN UINTN     NumberOfBytes
+)
+{
+  return 0;
+}
+
+
+/**
+  Read data from serial device and save the datas in buffer.
+
+  Reads NumberOfBytes data bytes from a serial device into the buffer
+  specified by Buffer. The number of bytes actually read is returned.
+  If the return value is less than NumberOfBytes, then the rest operation failed.
+  If Buffer is NULL, then ASSERT().
+  If NumberOfBytes is zero, then return 0.
+
+  @param  Buffer           The pointer to the data buffer to store the data read from the serial device.
+  @param  NumberOfBytes    The number of bytes which will be read.
+
+  @retval 0                Read data failed; No data is to be read.
+  @retval >0               The actual number of bytes read from serial device.
+
+**/
+UINTN
+EFIAPI
+SerialPortRead (
+  OUT UINT8     *Buffer,
+  IN  UINTN     NumberOfBytes
+)
+{
+  return 0;
+}
+
+/**
+  Polls a serial device to see if there is any data waiting to be read.
+
+  Polls a serial device to see if there is any data waiting to be read.
+  If there is data waiting to be read from the serial device, then TRUE is returned.
+  If there is no data waiting to be read from the serial device, then FALSE is returned.
+
+  @retval TRUE             Data is waiting to be read from the serial device.
+  @retval FALSE            There is no data waiting to be read from the serial device.
+
+**/
+BOOLEAN
+EFIAPI
+SerialPortPoll (
+  VOID
+  )
+{
+  return FALSE;
+}
+
+/**
+  Sets the control bits on a serial device.
+
+  @param Control                Sets the bits of Control that are settable.
+
+  @retval RETURN_SUCCESS        The new control bits were set on the serial device.
+  @retval RETURN_UNSUPPORTED    The serial device does not support this operation.
+  @retval RETURN_DEVICE_ERROR   The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+  IN UINT32 Control
+  )
+{
+  return RETURN_UNSUPPORTED;
+}
+
+/**
+  Retrieve the status of the control bits on a serial device.
+
+  @param Control                A pointer to return the current control signals from the serial device.
+
+  @retval RETURN_SUCCESS        The control bits were read from the serial device.
+  @retval RETURN_UNSUPPORTED    The serial device does not support this operation.
+  @retval RETURN_DEVICE_ERROR   The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+  OUT UINT32 *Control
+  )
+{
+  return RETURN_UNSUPPORTED;
+}
+
+/**
+  Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+  data bits, and stop bits on a serial device.
+
+  @param BaudRate           The requested baud rate. A BaudRate value of 0 will use the
+                            device's default interface speed.
+                            On output, the value actually set.
+  @param ReveiveFifoDepth   The requested depth of the FIFO on the receive side of the
+                            serial interface. A ReceiveFifoDepth value of 0 will use
+                            the device's default FIFO depth.
+                            On output, the value actually set.
+  @param Timeout            The requested time out for a single character in microseconds.
+                            This timeout applies to both the transmit and receive side of the
+                            interface. A Timeout value of 0 will use the device's default time
+                            out value.
+                            On output, the value actually set.
+  @param Parity             The type of parity to use on this serial device. A Parity value of
+                            DefaultParity will use the device's default parity value.
+                            On output, the value actually set.
+  @param DataBits           The number of data bits to use on the serial device. A DataBits
+                            vaule of 0 will use the device's default data bit setting.
+                            On output, the value actually set.
+  @param StopBits           The number of stop bits to use on this serial device. A StopBits
+                            value of DefaultStopBits will use the device's default number of
+                            stop bits.
+                            On output, the value actually set.
+
+  @retval RETURN_SUCCESS            The new attributes were set on the serial device.
+  @retval RETURN_UNSUPPORTED        The serial device does not support this operation.
+  @retval RETURN_INVALID_PARAMETER  One or more of the attributes has an unsupported value.
+  @retval RETURN_DEVICE_ERROR       The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+  IN OUT UINT64             *BaudRate,
+  IN OUT UINT32             *ReceiveFifoDepth,
+  IN OUT UINT32             *Timeout,
+  IN OUT EFI_PARITY_TYPE    *Parity,
+  IN OUT UINT8              *DataBits,
+  IN OUT EFI_STOP_BITS_TYPE *StopBits
+  )
+{
+  return RETURN_UNSUPPORTED;
+}
+
diff --git a/Pixel3XL/Library/InMemorySerialPortLib/BaseSerialPortLibNull.inf b/Pixel3XL/Library/InMemorySerialPortLib/BaseSerialPortLibNull.inf
new file mode 100644
index 0000000..1d56051
--- /dev/null
+++ b/Pixel3XL/Library/InMemorySerialPortLib/BaseSerialPortLibNull.inf
@@ -0,0 +1,36 @@
+## @file
+#  Null instance of Serial Port Library with empty functions.
+#
+#  Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution. The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php.
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = BaseSerialPortLibNull
+  MODULE_UNI_FILE                = BaseSerialPortLibNull.uni
+  FILE_GUID                      = E4541241-8897-411a-91F8-7D7E45837146
+  MODULE_TYPE                    = BASE
+  VERSION_STRING                 = 1.0
+  LIBRARY_CLASS                  = SerialPortLib
+
+
+#
+#  VALID_ARCHITECTURES           = IA32 X64 EBC
+#
+
+[Sources]
+  BaseSerialPortLibNull.c
+
+
+[Packages]
+  MdePkg/MdePkg.dec
+
diff --git a/Pixel3XL/Library/InMemorySerialPortLib/BaseSerialPortLibNull.uni b/Pixel3XL/Library/InMemorySerialPortLib/BaseSerialPortLibNull.uni
new file mode 100644
index 0000000..8c61c5a
--- /dev/null
+++ b/Pixel3XL/Library/InMemorySerialPortLib/BaseSerialPortLibNull.uni
@@ -0,0 +1,21 @@
+// /** @file
+// Null instance of Serial Port Library with empty functions.
+//
+// Null instance of Serial Port Library with empty functions.
+//
+// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+//
+// This program and the accompanying materials
+// are licensed and made available under the terms and conditions of the BSD License
+// which accompanies this distribution. The full text of the license may be found at
+// http://opensource.org/licenses/bsd-license.php.
+// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT             #language en-US "Null instance of Serial Port Library with empty functions"
+
+#string STR_MODULE_DESCRIPTION          #language en-US "Null instance of Serial Port Library with empty functions."
+