Applying overlay materials into multi-surface meshes currently
requires adding a next pass material to all the surfaces, which
might be cumbersome when the material is to be applied to a range
of different geometries. This also makes it not trivial to use
AnimationPlayer to control the material in case of visual effects.
The material_override property is not an option as it works
replacing the active material for the surfaces, not adding a new pass.
This commit adds the material_overlay property to GeometryInstance3D
(and therefore MeshInstance3D), having the same reach as
material_override (that is, all surfaces) but adding a new material
pass on top of the active materials, instead of replacing them.
Each file in Godot has had multiple contributors who co-authored it over the
years, and the information of who was the original person to create that file
is not very relevant, especially when used so inconsistently.
`git blame` is a much better way to know who initially authored or later
modified a given chunk of code, and most IDEs now have good integration to
show this information.
To make baked colors of lights equal to dynamic colors of lights they have to be
converted to linear as the colors of dynamic lights are converted to linear by
RendererSceneRenderRD.
Makes the API for forces and impulses more flexible, easier to
understand and harmonized between 2D and 3D.
Rigid bodies now have 3 sets of methods for forces and impulses:
-apply_impulse() for impulses (one-shot and time independent)
-apply_force() for forces (time dependent) applied for the current step
-add_constant_force() for forces that keeps being applied each step
Also updated the documentation to clarify the different methods and
parameters in rigid body nodes, body direct state and physics servers.
This reduces visible banding in indirect lighting and reflections.
Sharp reflections now match more closely the original scene.
The downside of this change is that clipping may appear in reflections
in extremely bright scenes, but this should not be a concern in most
scenes.
GPUParticles attractors and collision are currently only available in 3D.
Their 2D counterparts haven't been implemented yet, but they will use
separate nodes.
We prefer to prevent using chained assignment (`T a = b = c = T();`) as this
can lead to confusing code and subtle bugs.
According to https://en.wikipedia.org/wiki/Assignment_operator_(C%2B%2B), C++
allows any arbitrary return type, so this is standard compliant.
This could be re-assessed if/when we have an actual need for a behavior more
akin to that of the C++ STL, for now this PR simply changes a handful of
cases which were inconsistent with the rest of the codebase (`void` return
type was already the most common case prior to this commit).
The `opacity` property is superseded by the GeometryInstance3D
`transparency` property. It works the opposite way (0.0 is opaque,
1.0 is fully transparent), but provides the same behavior in a more
universal manner.
Floating-point values are accepted as dynamic range settings.
This also clamps the lowest value to 1.0, as there's no practical
use case for going below 1.0 (it introduces clipping without
improving precision).
Reporting rest collision information is needed for move_and_collide and
move_and_slide so floor detection can be done properly, but in the case
of just testing the motion for collision, it makes sense to return false
if the body is able to move all along the path without being stopped.
Updated the logic in test_move and clarified the documentation for
test_move and move_and_collide.
In all physics servers, body_get_direct_state() now silently returns
nullptr when the body has been already freed or is removed from space,
so the client code can detect this state and invalidate the body rid.
In 2D, there is no change in behavior (just no more errors).
In 3D, the Bullet server returned a valid direct body state when the
body was removed from the physics space, but in this case it didn't
make sense to use the information from the body state.
Same as what is already done for shape queries, applied to point and ray
queries. Easier to document and more flexible to add more parameters.
Also expose intersect_point method to script in 3D.
Remove intersect_point_on_canvas in 2D, replaced with a parameter.
This crash occurred when an audio stream finished playing in NOTIFICATION_INTERNAL_PROCESS,
during which it would iterate through a loop of playbacks,
leading to a "finished" signal, which removed the audio player from the tree
which led to a NOTIFICATION_EXIT_TREE,
which would mutate the array of playbacks while within the above loop.
This moves the signal callback outside of the loop which avoids the crash.
Note: previously, the signal was called multiple times if the same player finishes multiple times in one frame. Now it is at most once per frame.
Affects AudioStreamPlayer, AudioStreamPlayer2D and AudioStreamPlayer3D
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
Damping values are now non-negative.
Add new properties linear_damp_mode and angular_damp_mode to set the way
RigidDynamicBody and PhysicalBone (2D & 3D) use damping values.
It can now be Combine (default) to add to the default/areas, or Replace
to override the value completely (current behavior).
The parent `_validate_property()` wasn't called, which led to shadow
properties being visible even if shadows were disabled on a
DirectionalLight3D node.
Fix NavigationObstacle3D to be attached to navigation map - without it
the NavigationObstacle3D is not working.
Replace radius approximation algorithm with simple "radius" property.
* Made the Basis euler orders indexed via enum.
* Node3D has a new rotation_order property to choose Euler rotation order.
* Node3D has also a rotation_mode property to choose between Euler, Quaternion and Basis
Exposing these modes as well as the order makes Godot a lot friendlier for animators, which can choose the best way to interpolate rotations.
The new *Basis* mode makes the (exposed) transform property obsolete, so it was removed (can still be accessed by code of course).
Some split distance properties are unused depending on the
current shadow mode. Also, Blend Splits can only be used if the shadow
mode is PSSM 2 Splits or PSSM 4 Splits.
This also moves the Fade Start property to be located after the
split properties. This avoids intertwining "conditional" properties
with a property that's always available.
The built-in ALPHA in spatial shaders comes pre-set with a per-instance
transparency value. Multiply by it if you want to keep it.
The transparency value of any given GeometryInstance3D is affected by:
- Its new "transparency" property.
- Its own visiblity range when the new "visibility_range_fade_mode"
property is set to "Self".
- Its parent visibility range when the parent's fade mode is
set to "Dependencies".
The "Self" mode will fade-out the instance when reaching the visibility
range limits, while the "Dependencies" mode will fade-in its
dependencies.
Per-instance transparency is only implemented in the forward clustered
renderer, support for mobile should be added in the future.
Co-authored-by: reduz <reduzio@gmail.com>
When emitting stops CPUParticles3D::_set_redraw(bool p_redraw) will set that value to 0 so when you change the amount after that it will actually not update correclty.
This fixes an issue where if it was not emitting when the scene loaded and it start after that the amount is not reflected correclty. This also happened when you checked out the box for emitting in the editor, changed the value of amount and then checked on the box for emitting. With this change if it is emitting during the change it does interrupt the previous particles when you change. The amount and the emit starts from beginning but that is to be expected on an amount of particles change.
Proper logic for changing physics state when disabled and disabled mode
is changed (it was unnecessarily making calls to re-initialize physics).
Extra error handling in soft body implementations to avoid crashes with
invalid mesh.
Update collision_object_3d.cpp
2d modified and UINT32 usage
Proper uINT32max usage
Change the unreacheable return value of shape_find_owner()
This reverts commit 5be98b81428169ba2dd5baecd00f1adfd9260e5c, reversing
changes made to efa3ff6b95.
Change the unreacheable return value of shape_find_owner()
changed from 0 to uint32_max"
This reverts commit c143bb099af2666454f82428a57f2721af60a84d.
Revert "changed from 0 to uint32_max""
This reverts commit 59e94edb9a32edff15f3cb881e6fc394d2aa7f65.
Revert "changed from 0 to uint32_max"
This reverts commit c143bb099af2666454f82428a57f2721af60a84d.
Revert "Revert "changed from 0 to uint32_max"""
This reverts commit c81d1073ec21b4cde4684a6dbd595f3359283bad.
Revert "changed from 0 to uint32_max"
This reverts commit c143bb099af2666454f82428a57f2721af60a84d.
Revert "changed from 0 to uint32_max""
This reverts commit 59e94edb9a32edff15f3cb881e6fc394d2aa7f65.
Revert "Revert "changed from 0 to uint32_max"""
This reverts commit 6dbd972aa5c4580d4f6270ead6c66eea18617f29.
Revert "changed from 0 to uint32_max""
This reverts commit 59e94edb9a32edff15f3cb881e6fc394d2aa7f65.
Revert "Revert "changed from 0 to uint32_max"""
This reverts commit b769ac2d11ad12f02a388d9dad17519f81d9c3b6.
Revert "Revert "Revert "changed from 0 to uint32_max""""
This reverts commit 1e8d84f7ec12da01c3153e08bb8609cf2c6fd58a.
Revert "Revert "Revert "Revert "changed from 0 to uint32_max"""""
This reverts commit 0dc17abefad6d540c18bba7b4df9d8c04e090d0c.
Change the unreacheable return value of shape_find_owner()
When switching the mesh at runtime, the physics server wasn't properly
updated with the new mesh. Now we keep track of the soft body mesh to
make sure everything is properly initialized on pre-draw.
Also cleaned a few things around private methods.
* New track type BLEND_SHAPE
* Blend shapes are imported via this new track type
* Processing is more optimized (no longer relies on variants)
* Modified the Blend Shape API in MeshInstance3D to use indices rather than StringNames (more optimizes)
* Promo: Fixed a small bug in gizmo updating in Node3D that affected performance
Dedicated BlendShape tracks are required for both optimization and eventually implementing them in animation compression.
Fix some typoed names from the doc
Add _index to "index" parameters of *_shape_* signals, this is both in doc and in the template. This makes the code, signature and doc easier to understand
Add method to get Node from the _index params of those signals. This was not as easy to find as one would expect. Putting this information where it is needed will help.
* Animations and Skeletons are now pose-only.
* Rest transform is kept as reference (when it exists) and for IK
* Improves 3D model compatibility (non uniform transforms will properly work, as well as all animations coming from Autodesk products).
* `Animation.TYPE_TRANSFORM3D` track is gone.
* Added POSITION_3D, ROTATION_3D, SCALE_3D tracks.
* GLTF2, Collada, FBX importers will only import the track types found.
* Skeleton3D bone poses are now Pos/Rot/Scale, pose matrix removed.
* AnimationPlayer and AnimationTree animate these tracks separately, only when found.
* Removed BakeReset code, is useless with these changes.
This is the first in a series of commits designed to make the animation system in Godot more useful, which includes:
* Better compatibility with Autodesk products
* Better reusability of animations across models (including retargeting).
* Proper animation compression.
* etc.
*Note* GLTF2 animation saving went broken with this PR, needs to be fixed in a subsequent one.
Added a parameter in test_body_motion to exclude attached objects from
collision, used to avoid collision with all TileMap tiles with moving
platform motion instead of just the one tile the character touches.
Same changes made in 3D for consistency, and handling potential similar
cases.
-Physics servers test body motion use a class to hold parameters instead
of multiple arguments to make it more readable and flexible since there
are many options
-Improved documentation for test body motion and kinematic collision
-Removed read-only properties for body motion results (not handled in
scripts, so they should be get_ methods only instead)
* Usage was always confusing for users
* The ability to generate a pyramid shape was moved to Camera3D
* SpringArm3D now casts using the camera pyramid shape if no shape is supplied.
Convert GLTF Document to use ImporterMeshInstance3D.
Add a GLTFDocument extension list and an extension for converting the importer mesh instance 3d to mesh instance 3d.
Use GLTF module when the editor tools are disabled.
Modified the render server to be less restrictive on matching blend arrays and have more logging.
Misc bugs with multimesh.
Always index the meshes.
