Windows socket implementation is, as usual, broken in many ways.
This includes `setsockopt` failing to set `TCP_NODELAY` if the socket is
still in a connecting state.
This also means we need to keep polling the IP resolver until the socket
reaches the CONNECTED state (so it can set the TCP_NODELAY after the
connection is successful).
Almost all WebSocket implementations (including all major browsers)
disable Nagle's algorithm to favor low latency over packet overhead.
This was also the case in Godot 3.x, while in Godot 4.0 this was only
being done for clients and wasn't even always working due to a bug.
This commit fixes the aforementioned bug, and forces TCP_NODELAY when
accepting a stream as a server.
Random-access access to `List` when iterating is `O(n^2)` (`O(n)` when
accessing a single element)
* Removed subscript operator, in favor of a more explicit `get`
* Added conversion from `Iterator` to `ConstIterator`
* Remade existing operations into other solutions when applicable
The UWP platform port was never ported to the Godot 4.0+ API,
and it's now accumulating bitrot as it doesn't compile, and thus
we no longer propagate platform changes in it.
So we finally remove to acknowledge this state. There's still some
interest in reviving the UWP port eventually, especially as support
for Direct3D 12 will soon be merged, but when that happens it will
be easiest to redo it from scratch.
We don't use that info for anything, and it generates unnecessary diffs
every time we bump the minor version (and CI failures if we forget to
sync some files from opt-in modules (mono, text_server_fb).
This applies our existing style guide, and adds a new rule to that style
guide for modular components such as platform ports and modules:
Includes from the platform port or module ("local" includes) should be listed
first in their own block using relative paths, before Godot's "core" includes
which use "absolute" (project folder relative) paths, and finally thirdparty
includes.
Includes in `#ifdef`s come after their relevant section, i.e. the overall
structure is:
- Local includes
* Conditional local includes
- Core includes
* Conditional core includes
- Thirdparty includes
* Conditional thirdparty includes
If no StreamPeerTLS implementation is available, HTTPClient and
WebSocketPeer will now correctly refuse to connect using TLS returning
ERR_UNAVAILABLE.
Similarly, ENetConnection will refuse to setup DTLS when PacketPeerDTLS
is not available.
Adds a check to make_rst to look for matches
between the text inside of the [code][/code] tag
and known param identifiers.
Fixes most of what was revealed.
Use a TLSOptions configuration object which is created via static
functions.
- "TLSOptions.client": uses the standard CA and common name verification.
- "TLSOptions.client_unsafe": uses optional CA verification (i.e. if specified)
- "TLSOptions.server": is the standard server configuration (chain + key)
This will allow us to expand the TLS configuration options to include
e.g. mutual authentication without bloating the classes that uses
StreamPeerTLS and PacketPeerDTLS as underlying peers.
As many open source projects have started doing it, we're removing the
current year from the copyright notice, so that we don't need to bump
it every year.
It seems like only the first year of publication is technically
relevant for copyright notices, and even that seems to be something
that many companies stopped listing altogether (in a version controlled
codebase, the commits are a much better source of date of publication
than a hardcoded copyright statement).
We also now list Godot Engine contributors first as we're collectively
the current maintainers of the project, and we clarify that the
"exclusive" copyright of the co-founders covers the timespan before
opensourcing (their further contributions are included as part of Godot
Engine contributors).
Also fixed "cf." Frenchism - it's meant as "refer to / see".
- Removed empty paragraphs in XML.
- Consistently use bold style for "Example:", on a new line.
- Fix usage of `[code]` when hyperlinks could be used (`[member]`, `[constant]`).
- Fix invalid usage of backticks for inline code in BBCode.
- Fix some American/British English spelling inconsistencies.
- Other minor fixes spotted along the way, including typo fixes with codespell.
- Don't specify `@GlobalScope` for `enum` and `constant`.
MultiplayerPeer changes:
- Adds is_server_relay_supported virtual method
Informs the upper MultiplayerAPI layer if it can signal peers connected
to the server to other clients, and perform packet relaying among them.
- Adds get_packet_channel and get_packet_mode virtual methods
Allows the MultiplayerAPI to retrieve the channel and transfer modes to
use when relaying the last received packet.
SceneMultiplayerPeer changes:
- Implement peer signaling and packet relaying when the MultiplayerPeer
advertise they are supported.
ENet, WebRTC, WebSocket changes:
- Removed custom code for relaying from WebSocket and ENet, and let it
be handled by the upper layer.
- Update WebRTC to split create_client, create_server, and create_mesh,
with the latter behaving like the old initialize with
"server_compatibility = false", and the first two supporting the upper
layer relaying protocol.
The bug was caused by not checking the TCP CONNECTING state
appropriately during the client handshake, and not checking the TCP
CONNECTED state during connection (which is unlikely, but might still
happen).
This commit is a huge refactor of the websocket module.
The module is really old, and some design choices had to be
re-evaluated.
The WebSocketClient and WebSocketServer classes are now gone, and
WebSocketPeer can act as either client or server.
The WebSocketMultiplayerPeer class is no longer abstract, and implements
the Multiplayer API on top of the lower level WebSocketPeer.
WebSocketPeer is now a "raw" peer, like StreamPeerTCP and StreamPeerTLS,
so it emits no signal, and just needs polling to update its internal
state.
To use it as a client, simply call WebSocketPeer.coonect_to_url, then
frequently poll the peer until STATE_OPEN is reached and then you can
write or read from it, or STATE_CLOSED and then you can check the
disconnect code and reason).
To implement a server instead, a TCPServer must be created, and the
accepted connections needs to be provided to
WebSocketPeer.accept_stream (which will perform the HTTP handshake).
A full example of a WebSocketServer using TLS will be provided in the
demo repository.
Implements https://github.com/godotengine/godot-proposals/issues/3371.
New `target` presets
====================
The `tools` option is removed and `target` changes to use three new presets,
which match the builds users are familiar with. These targets control the
default optimization level and enable editor-specific and debugging code:
- `editor`: Replaces `tools=yes target=release_debug`.
* Defines: `TOOLS_ENABLED`, `DEBUG_ENABLED`, `-O2`/`/O2`
- `template_debug`: Replaces `tools=no target=release_debug`.
* Defines: `DEBUG_ENABLED`, `-O2`/`/O2`
- `template_release`: Replaces `tools=no target=release`.
* Defines: `-O3`/`/O2`
New `dev_build` option
======================
The previous `target=debug` is now replaced by a separate `dev_build=yes`
option, which can be used in combination with either of the three targets,
and changes the following:
- `dev_build`: Defines `DEV_ENABLED`, disables optimization (`-O0`/`/0d`),
enables generating debug symbols, does not define `NDEBUG` so `assert()`
works in thirdparty libraries, adds a `.dev` suffix to the binary name.
Note: Unlike previously, `dev_build` defaults to off so that users who
compile Godot from source get an optimized and small build by default.
Engine contributors should now set `dev_build=yes` in their build scripts or
IDE configuration manually.
Changed binary names
====================
The name of generated binaries and object files are changed too, to follow
this format:
`godot.<platform>.<target>[.dev][.double].<arch>[.<extra_suffix>][.<ext>]`
For example:
- `godot.linuxbsd.editor.dev.arm64`
- `godot.windows.template_release.double.x86_64.mono.exe`
Be sure to update your links/scripts/IDE config accordingly.
More flexible `optimize` and `debug_symbols` options
====================================================
The optimization level and whether to generate debug symbols can be further
specified with the `optimize` and `debug_symbols` options. So the default
values listed above for the various `target` and `dev_build` combinations
are indicative and can be replaced when compiling, e.g.:
`scons p=linuxbsd target=template_debug dev_build=yes optimize=debug`
will make a "debug" export template with dev-only code enabled, `-Og`
optimization level for GCC/Clang, and debug symbols. Perfect for debugging
complex crashes at runtime in an exported project.
When going from version 14 to 15 it would introduce a tiny change in
`websocket_macros.h` just before the comment re-enabling clang-format,
but this can be solved by just letting it do its work.
Bonus cosmetic change in `math_fieldwise.cpp` where clang-format isn't
used, and bump recommended versions for pre-commit hook to [13; 15].
