diff --git a/doc/classes/@GlobalScope.xml b/doc/classes/@GlobalScope.xml index 095756c1b1e..3a1bd83c184 100644 --- a/doc/classes/@GlobalScope.xml +++ b/doc/classes/@GlobalScope.xml @@ -1099,14 +1099,14 @@ - Allocates a unique ID which can be used by the implementation to construct a RID. This is used mainly from native extensions to implement servers. + Allocates a unique ID which can be used by the implementation to construct an RID. This is used mainly from native extensions to implement servers. - Creates a RID from a [param base]. This is used mainly from native extensions to build servers. + Creates an RID from a [param base]. This is used mainly from native extensions to build servers. diff --git a/doc/classes/ArrayMesh.xml b/doc/classes/ArrayMesh.xml index dde7153d5f4..0f6bf89cd7c 100644 --- a/doc/classes/ArrayMesh.xml +++ b/doc/classes/ArrayMesh.xml @@ -71,7 +71,7 @@ Surfaces are created to be rendered using a [param primitive], which may be any of the values defined in [enum Mesh.PrimitiveType]. The [param arrays] argument is an array of arrays. Each of the [constant Mesh.ARRAY_MAX] elements contains an array with some of the mesh data for this surface as described by the corresponding member of [enum Mesh.ArrayType] or [code]null[/code] if it is not used by the surface. For example, [code]arrays[0][/code] is the array of vertices. That first vertex sub-array is always required; the others are optional. Adding an index array puts this surface into "index mode" where the vertex and other arrays become the sources of data and the index array defines the vertex order. All sub-arrays must have the same length as the vertex array (or be an exact multiple of the vertex array's length, when multiple elements of a sub-array correspond to a single vertex) or be empty, except for [constant Mesh.ARRAY_INDEX] if it is used. The [param blend_shapes] argument is an array of vertex data for each blend shape. Each element is an array of the same structure as [param arrays], but [constant Mesh.ARRAY_VERTEX], [constant Mesh.ARRAY_NORMAL], and [constant Mesh.ARRAY_TANGENT] are set if and only if they are set in [param arrays] and all other entries are [code]null[/code]. - The [param lods] argument is a dictionary with [float] keys and [PackedInt32Array] values. Each entry in the dictionary represents a LOD level of the surface, where the value is the [constant Mesh.ARRAY_INDEX] array to use for the LOD level and the key is roughly proportional to the distance at which the LOD stats being used. I.e., increasing the key of a LOD also increases the distance that the objects has to be from the camera before the LOD is used. + The [param lods] argument is a dictionary with [float] keys and [PackedInt32Array] values. Each entry in the dictionary represents an LOD level of the surface, where the value is the [constant Mesh.ARRAY_INDEX] array to use for the LOD level and the key is roughly proportional to the distance at which the LOD stats being used. I.e., increasing the key of an LOD also increases the distance that the objects has to be from the camera before the LOD is used. The [param flags] argument is the bitwise or of, as required: One value of [enum Mesh.ArrayCustomFormat] left shifted by [code]ARRAY_FORMAT_CUSTOMn_SHIFT[/code] for each custom channel in use, [constant Mesh.ARRAY_FLAG_USE_DYNAMIC_UPDATE], [constant Mesh.ARRAY_FLAG_USE_8_BONE_WEIGHTS], or [constant Mesh.ARRAY_FLAG_USES_EMPTY_VERTEX_ARRAY]. [b]Note:[/b] When using indices, it is recommended to only use points, lines, or triangles. diff --git a/doc/classes/Color.xml b/doc/classes/Color.xml index 517fb6bef77..942d3bc80db 100644 --- a/doc/classes/Color.xml +++ b/doc/classes/Color.xml @@ -181,7 +181,7 @@ - Decodes a [Color] from a RGBE9995 format integer. See [constant Image.FORMAT_RGBE9995]. + Decodes a [Color] from an RGBE9995 format integer. See [constant Image.FORMAT_RGBE9995]. diff --git a/doc/classes/Crypto.xml b/doc/classes/Crypto.xml index 59d19b03f4a..65abc4c641a 100644 --- a/doc/classes/Crypto.xml +++ b/doc/classes/Crypto.xml @@ -123,7 +123,7 @@ Generates a self-signed [X509Certificate] from the given [CryptoKey] and [param issuer_name]. The certificate validity will be defined by [param not_before] and [param not_after] (first valid date and last valid date). The [param issuer_name] must contain at least "CN=" (common name, i.e. the domain name), "O=" (organization, i.e. your company name), "C=" (country, i.e. 2 lettered ISO-3166 code of the country the organization is based in). - A small example to generate an RSA key and a X509 self-signed certificate. + A small example to generate an RSA key and an X509 self-signed certificate. [codeblocks] [gdscript] var crypto = Crypto.new() diff --git a/doc/classes/Engine.xml b/doc/classes/Engine.xml index d923d229e00..ca78054875b 100644 --- a/doc/classes/Engine.xml +++ b/doc/classes/Engine.xml @@ -28,7 +28,7 @@ GD.Print("Running a 32-bit build of Godot."); [/csharp] [/codeblocks] - [b]Note:[/b] This method does [i]not[/i] return the name of the system's CPU architecture (like [method OS.get_processor_name]). For example, when running a [code]x86_32[/code] Godot binary on a [code]x86_64[/code] system, the returned value will still be [code]"x86_32"[/code]. + [b]Note:[/b] This method does [i]not[/i] return the name of the system's CPU architecture (like [method OS.get_processor_name]). For example, when running an [code]x86_32[/code] Godot binary on an [code]x86_64[/code] system, the returned value will still be [code]"x86_32"[/code]. @@ -314,7 +314,7 @@ The maximum number of frames that can be rendered every second (FPS). A value of [code]0[/code] means the framerate is uncapped. Limiting the FPS can be useful to reduce the host machine's power consumption, which reduces heat, noise emissions, and improves battery life. If [member ProjectSettings.display/window/vsync/vsync_mode] is [b]Enabled[/b] or [b]Adaptive[/b], the setting takes precedence and the max FPS number cannot exceed the monitor's refresh rate. - If [member ProjectSettings.display/window/vsync/vsync_mode] is [b]Enabled[/b], on monitors with variable refresh rate enabled (G-Sync/FreeSync), using a FPS limit a few frames lower than the monitor's refresh rate will [url=https://blurbusters.com/howto-low-lag-vsync-on/]reduce input lag while avoiding tearing[/url]. + If [member ProjectSettings.display/window/vsync/vsync_mode] is [b]Enabled[/b], on monitors with variable refresh rate enabled (G-Sync/FreeSync), using an FPS limit a few frames lower than the monitor's refresh rate will [url=https://blurbusters.com/howto-low-lag-vsync-on/]reduce input lag while avoiding tearing[/url]. See also [member physics_ticks_per_second] and [member ProjectSettings.application/run/max_fps]. [b]Note:[/b] The actual number of frames per second may still be below this value if the CPU or GPU cannot keep up with the project's logic and rendering. [b]Note:[/b] If [member ProjectSettings.display/window/vsync/vsync_mode] is [b]Disabled[/b], limiting the FPS to a high value that can be consistently reached on the system can reduce input lag compared to an uncapped framerate. Since this works by ensuring the GPU load is lower than 100%, this latency reduction is only effective in GPU-bottlenecked scenarios, not CPU-bottlenecked scenarios. diff --git a/doc/classes/Environment.xml b/doc/classes/Environment.xml index bf91d02b3ad..189517c392e 100644 --- a/doc/classes/Environment.xml +++ b/doc/classes/Environment.xml @@ -317,7 +317,7 @@ The default exposure used for tonemapping. Higher values result in a brighter image. See also [member tonemap_white]. - The tonemapping mode to use. Tonemapping is the process that "converts" HDR values to be suitable for rendering on a LDR display. (Godot doesn't support rendering on HDR displays yet.) + The tonemapping mode to use. Tonemapping is the process that "converts" HDR values to be suitable for rendering on an LDR display. (Godot doesn't support rendering on HDR displays yet.) The white reference value for tonemapping (also called "whitepoint"). Higher values can make highlights look less blown out, and will also slightly darken the whole scene as a result. Only effective if the [member tonemap_mode] isn't set to [constant TONE_MAPPER_LINEAR]. See also [member tonemap_exposure]. diff --git a/doc/classes/FileAccess.xml b/doc/classes/FileAccess.xml index 2abd9974ca5..fad6cbcc933 100644 --- a/doc/classes/FileAccess.xml +++ b/doc/classes/FileAccess.xml @@ -257,7 +257,7 @@ - Returns a SHA-256 [String] representing the file at the given path or an empty [String] on failure. + Returns an SHA-256 [String] representing the file at the given path or an empty [String] on failure. diff --git a/doc/classes/HashingContext.xml b/doc/classes/HashingContext.xml index 86d69bc2f70..f2681ae7b30 100644 --- a/doc/classes/HashingContext.xml +++ b/doc/classes/HashingContext.xml @@ -14,7 +14,7 @@ # Check that file exists. if not FileAccess.file_exists(path): return - # Start a SHA-256 context. + # Start an SHA-256 context. var ctx = HashingContext.new() ctx.start(HashingContext.HASH_SHA256) # Open the file to hash. @@ -37,7 +37,7 @@ { return; } - // Start a SHA-256 context. + // Start an SHA-256 context. var ctx = new HashingContext(); ctx.Start(HashingContext.HashType.Sha256); // Open the file to hash. @@ -68,7 +68,7 @@ - Starts a new hash computation of the given [param type] (e.g. [constant HASH_SHA256] to start computation of a SHA-256). + Starts a new hash computation of the given [param type] (e.g. [constant HASH_SHA256] to start computation of an SHA-256). diff --git a/doc/classes/Image.xml b/doc/classes/Image.xml index 67b373ddfeb..68d4deaffdb 100644 --- a/doc/classes/Image.xml +++ b/doc/classes/Image.xml @@ -368,7 +368,7 @@ - Loads an image from the string contents of a SVG file ([b].svg[/b]). + Loads an image from the string contents of an SVG file ([b].svg[/b]). [b]Note:[/b] This method is only available in engine builds with the SVG module enabled. By default, the SVG module is enabled, but it can be disabled at build-time using the [code]module_svg_enabled=no[/code] SCons option. diff --git a/doc/classes/ImporterMesh.xml b/doc/classes/ImporterMesh.xml index 9bc1bf035e7..eeabcd6e12c 100644 --- a/doc/classes/ImporterMesh.xml +++ b/doc/classes/ImporterMesh.xml @@ -31,7 +31,7 @@ Surfaces are created to be rendered using a [param primitive], which may be any of the values defined in [enum Mesh.PrimitiveType]. The [param arrays] argument is an array of arrays. Each of the [constant Mesh.ARRAY_MAX] elements contains an array with some of the mesh data for this surface as described by the corresponding member of [enum Mesh.ArrayType] or [code]null[/code] if it is not used by the surface. For example, [code]arrays[0][/code] is the array of vertices. That first vertex sub-array is always required; the others are optional. Adding an index array puts this surface into "index mode" where the vertex and other arrays become the sources of data and the index array defines the vertex order. All sub-arrays must have the same length as the vertex array (or be an exact multiple of the vertex array's length, when multiple elements of a sub-array correspond to a single vertex) or be empty, except for [constant Mesh.ARRAY_INDEX] if it is used. The [param blend_shapes] argument is an array of vertex data for each blend shape. Each element is an array of the same structure as [param arrays], but [constant Mesh.ARRAY_VERTEX], [constant Mesh.ARRAY_NORMAL], and [constant Mesh.ARRAY_TANGENT] are set if and only if they are set in [param arrays] and all other entries are [code]null[/code]. - The [param lods] argument is a dictionary with [float] keys and [PackedInt32Array] values. Each entry in the dictionary represents a LOD level of the surface, where the value is the [constant Mesh.ARRAY_INDEX] array to use for the LOD level and the key is roughly proportional to the distance at which the LOD stats being used. I.e., increasing the key of a LOD also increases the distance that the objects has to be from the camera before the LOD is used. + The [param lods] argument is a dictionary with [float] keys and [PackedInt32Array] values. Each entry in the dictionary represents an LOD level of the surface, where the value is the [constant Mesh.ARRAY_INDEX] array to use for the LOD level and the key is roughly proportional to the distance at which the LOD stats being used. I.e., increasing the key of an LOD also increases the distance that the objects has to be from the camera before the LOD is used. The [param flags] argument is the bitwise or of, as required: One value of [enum Mesh.ArrayCustomFormat] left shifted by [code]ARRAY_FORMAT_CUSTOMn_SHIFT[/code] for each custom channel in use, [constant Mesh.ARRAY_FLAG_USE_DYNAMIC_UPDATE], [constant Mesh.ARRAY_FLAG_USE_8_BONE_WEIGHTS], or [constant Mesh.ARRAY_FLAG_USES_EMPTY_VERTEX_ARRAY]. [b]Note:[/b] When using indices, it is recommended to only use points, lines, or triangles. diff --git a/doc/classes/Input.xml b/doc/classes/Input.xml index abb04fd4622..e622a6bce30 100644 --- a/doc/classes/Input.xml +++ b/doc/classes/Input.xml @@ -118,7 +118,7 @@ - Returns a SDL2-compatible device GUID on platforms that use gamepad remapping, e.g. [code]030000004c050000c405000000010000[/code]. Returns [code]"Default Gamepad"[/code] otherwise. Godot uses the [url=https://github.com/gabomdq/SDL_GameControllerDB]SDL2 game controller database[/url] to determine gamepad names and mappings based on this GUID. + Returns an SDL2-compatible device GUID on platforms that use gamepad remapping, e.g. [code]030000004c050000c405000000010000[/code]. Returns [code]"Default Gamepad"[/code] otherwise. Godot uses the [url=https://github.com/gabomdq/SDL_GameControllerDB]SDL2 game controller database[/url] to determine gamepad names and mappings based on this GUID. diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index 9433abf0d4d..407041289c9 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -353,7 +353,7 @@ Maximum number of frames per second allowed. A value of [code]0[/code] means "no limit". The actual number of frames per second may still be below this value if the CPU or GPU cannot keep up with the project logic and rendering. Limiting the FPS can be useful to reduce system power consumption, which reduces heat and noise emissions (and improves battery life on mobile devices). If [member display/window/vsync/vsync_mode] is set to [code]Enabled[/code] or [code]Adaptive[/code], it takes precedence and the forced FPS number cannot exceed the monitor's refresh rate. - If [member display/window/vsync/vsync_mode] is [code]Enabled[/code], on monitors with variable refresh rate enabled (G-Sync/FreeSync), using a FPS limit a few frames lower than the monitor's refresh rate will [url=https://blurbusters.com/howto-low-lag-vsync-on/]reduce input lag while avoiding tearing[/url]. + If [member display/window/vsync/vsync_mode] is [code]Enabled[/code], on monitors with variable refresh rate enabled (G-Sync/FreeSync), using an FPS limit a few frames lower than the monitor's refresh rate will [url=https://blurbusters.com/howto-low-lag-vsync-on/]reduce input lag while avoiding tearing[/url]. If [member display/window/vsync/vsync_mode] is [code]Disabled[/code], limiting the FPS to a high value that can be consistently reached on the system can reduce input lag compared to an uncapped framerate. Since this works by ensuring the GPU load is lower than 100%, this latency reduction is only effective in GPU-bottlenecked scenarios, not CPU-bottlenecked scenarios. See also [member physics/common/physics_ticks_per_second]. This setting can be overridden using the [code]--max-fps <fps>[/code] command line argument (including with a value of [code]0[/code] for unlimited framerate). @@ -963,7 +963,7 @@ The command-line arguments to append to Godot's own command line when running the project. This doesn't affect the editor itself. It is possible to make another executable run Godot by using the [code]%command%[/code] placeholder. The placeholder will be replaced with Godot's own command line. Program-specific arguments should be placed [i]before[/i] the placeholder, whereas Godot-specific arguments should be placed [i]after[/i] the placeholder. - For example, this can be used to force the project to run on the dedicated GPU in a NVIDIA Optimus system on Linux: + For example, this can be used to force the project to run on the dedicated GPU in an NVIDIA Optimus system on Linux: [codeblock] prime-run %command% [/codeblock] @@ -990,7 +990,7 @@ If [code]true[/code], Autodesk FBX 3D scene files with the [code].fbx[/code] extension will be imported by converting them to glTF 2.0. - This requires configuring a path to a FBX2glTF executable in the editor settings at [member EditorSettings.filesystem/import/fbx2gltf/fbx2gltf_path]. + This requires configuring a path to an FBX2glTF executable in the editor settings at [member EditorSettings.filesystem/import/fbx2gltf/fbx2gltf_path]. Override for [member filesystem/import/fbx2gltf/enabled] on Android where FBX2glTF can't easily be accessed from Godot. diff --git a/doc/classes/RenderingServer.xml b/doc/classes/RenderingServer.xml index 152518e7da9..324e6d50b6d 100644 --- a/doc/classes/RenderingServer.xml +++ b/doc/classes/RenderingServer.xml @@ -3903,7 +3903,7 @@ - If [code]true[/code], 2D rendering will use a high dynamic range (HDR) format framebuffer matching the bit depth of the 3D framebuffer. When using the Forward+ renderer this will be a [code]RGBA16[/code] framebuffer, while when using the Mobile renderer it will be a [code]RGB10_A2[/code] framebuffer. Additionally, 2D rendering will take place in linear color space and will be converted to sRGB space immediately before blitting to the screen (if the Viewport is attached to the screen). Practically speaking, this means that the end result of the Viewport will not be clamped into the [code]0-1[/code] range and can be used in 3D rendering without color space adjustments. This allows 2D rendering to take advantage of effects requiring high dynamic range (e.g. 2D glow) as well as substantially improves the appearance of effects requiring highly detailed gradients. This setting has the same effect as [member Viewport.use_hdr_2d]. + If [code]true[/code], 2D rendering will use a high dynamic range (HDR) format framebuffer matching the bit depth of the 3D framebuffer. When using the Forward+ renderer this will be an [code]RGBA16[/code] framebuffer, while when using the Mobile renderer it will be an [code]RGB10_A2[/code] framebuffer. Additionally, 2D rendering will take place in linear color space and will be converted to sRGB space immediately before blitting to the screen (if the Viewport is attached to the screen). Practically speaking, this means that the end result of the Viewport will not be clamped into the [code]0-1[/code] range and can be used in 3D rendering without color space adjustments. This allows 2D rendering to take advantage of effects requiring high dynamic range (e.g. 2D glow) as well as substantially improves the appearance of effects requiring highly detailed gradients. This setting has the same effect as [member Viewport.use_hdr_2d]. [b]Note:[/b] This setting will have no effect when using the GL Compatibility renderer as the GL Compatibility renderer always renders in low dynamic range for performance reasons. diff --git a/doc/classes/SurfaceTool.xml b/doc/classes/SurfaceTool.xml index b4a88513ec4..094275c349b 100644 --- a/doc/classes/SurfaceTool.xml +++ b/doc/classes/SurfaceTool.xml @@ -124,7 +124,7 @@ - Generates a LOD for a given [param nd_threshold] in linear units (square root of quadric error metric), using at most [param target_index_count] indices. + Generates an LOD for a given [param nd_threshold] in linear units (square root of quadric error metric), using at most [param target_index_count] indices. diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml index 82bc8d82cb6..13d84d96d6f 100644 --- a/doc/classes/Viewport.xml +++ b/doc/classes/Viewport.xml @@ -368,7 +368,7 @@ In some cases, debanding may introduce a slightly noticeable dithering pattern. It's recommended to enable debanding only when actually needed since the dithering pattern will make lossless-compressed screenshots larger. - If [code]true[/code], 2D rendering will use an high dynamic range (HDR) format framebuffer matching the bit depth of the 3D framebuffer. When using the Forward+ renderer this will be a [code]RGBA16[/code] framebuffer, while when using the Mobile renderer it will be a [code]RGB10_A2[/code] framebuffer. Additionally, 2D rendering will take place in linear color space and will be converted to sRGB space immediately before blitting to the screen (if the Viewport is attached to the screen). Practically speaking, this means that the end result of the Viewport will not be clamped into the [code]0-1[/code] range and can be used in 3D rendering without color space adjustments. This allows 2D rendering to take advantage of effects requiring high dynamic range (e.g. 2D glow) as well as substantially improves the appearance of effects requiring highly detailed gradients. + If [code]true[/code], 2D rendering will use an high dynamic range (HDR) format framebuffer matching the bit depth of the 3D framebuffer. When using the Forward+ renderer this will be an [code]RGBA16[/code] framebuffer, while when using the Mobile renderer it will be an [code]RGB10_A2[/code] framebuffer. Additionally, 2D rendering will take place in linear color space and will be converted to sRGB space immediately before blitting to the screen (if the Viewport is attached to the screen). Practically speaking, this means that the end result of the Viewport will not be clamped into the [code]0-1[/code] range and can be used in 3D rendering without color space adjustments. This allows 2D rendering to take advantage of effects requiring high dynamic range (e.g. 2D glow) as well as substantially improves the appearance of effects requiring highly detailed gradients. [b]Note:[/b] This setting will have no effect when using the GL Compatibility renderer as the GL Compatibility renderer always renders in low dynamic range for performance reasons. diff --git a/doc/classes/XMLParser.xml b/doc/classes/XMLParser.xml index b6dd7a74f85..2b67ff6fbba 100644 --- a/doc/classes/XMLParser.xml +++ b/doc/classes/XMLParser.xml @@ -6,7 +6,7 @@ Provides a low-level interface for creating parsers for [url=https://en.wikipedia.org/wiki/XML]XML[/url] files. This class can serve as base to make custom XML parsers. To parse XML, you must open a file with the [method open] method or a buffer with the [method open_buffer] method. Then, the [method read] method must be called to parse the next nodes. Most of the methods take into consideration the currently parsed node. - Here is an example of using [XMLParser] to parse a SVG file (which is based on XML), printing each element and its attributes as a dictionary: + Here is an example of using [XMLParser] to parse an SVG file (which is based on XML), printing each element and its attributes as a dictionary: [codeblocks] [gdscript] var parser = XMLParser.new() diff --git a/modules/gltf/doc_classes/GLTFMesh.xml b/modules/gltf/doc_classes/GLTFMesh.xml index 8234ed9eac4..b4c3db7618e 100644 --- a/modules/gltf/doc_classes/GLTFMesh.xml +++ b/modules/gltf/doc_classes/GLTFMesh.xml @@ -1,7 +1,7 @@ - GLTFMesh represents an GLTF mesh. + GLTFMesh represents a GLTF mesh. GLTFMesh handles 3D mesh data imported from GLTF files. It includes properties for blend channels, blend weights, instance materials, and the mesh itself. diff --git a/modules/gltf/doc_classes/GLTFTexture.xml b/modules/gltf/doc_classes/GLTFTexture.xml index 50789a0ebfa..9ad7c0f4c66 100644 --- a/modules/gltf/doc_classes/GLTFTexture.xml +++ b/modules/gltf/doc_classes/GLTFTexture.xml @@ -1,7 +1,7 @@ - GLTFTexture represents a texture in an GLTF file. + GLTFTexture represents a texture in a GLTF file. diff --git a/modules/minimp3/doc_classes/ResourceImporterMP3.xml b/modules/minimp3/doc_classes/ResourceImporterMP3.xml index a84c51cf68a..72868623c76 100644 --- a/modules/minimp3/doc_classes/ResourceImporterMP3.xml +++ b/modules/minimp3/doc_classes/ResourceImporterMP3.xml @@ -1,11 +1,11 @@ - Imports a MP3 audio file for playback. + Imports an MP3 audio file for playback. MP3 is a lossy audio format, with worse audio quality compared to [ResourceImporterOggVorbis] at a given bitrate. - In most cases, it's recommended to use Ogg Vorbis over MP3. However, if you're using a MP3 sound source with no higher quality source available, then it's recommended to use the MP3 file directly to avoid double lossy compression. + In most cases, it's recommended to use Ogg Vorbis over MP3. However, if you're using an MP3 sound source with no higher quality source available, then it's recommended to use the MP3 file directly to avoid double lossy compression. MP3 requires more CPU to decode than [ResourceImporterWAV]. If you need to play a lot of simultaneous sounds, it's recommended to use WAV for those sounds instead, especially if targeting low-end devices. diff --git a/modules/openxr/doc_classes/OpenXRExtensionWrapperExtension.xml b/modules/openxr/doc_classes/OpenXRExtensionWrapperExtension.xml index ee2aa33108e..20ce1c42bf0 100644 --- a/modules/openxr/doc_classes/OpenXRExtensionWrapperExtension.xml +++ b/modules/openxr/doc_classes/OpenXRExtensionWrapperExtension.xml @@ -12,7 +12,7 @@ - Returns a pointer to a [code]XrCompositionLayerBaseHeader[/code] struct to provide a composition layer. This will only be called if the extension previously registered itself with [method OpenXRAPIExtension.register_composition_layer_provider]. + Returns a pointer to an [code]XrCompositionLayerBaseHeader[/code] struct to provide a composition layer. This will only be called if the extension previously registered itself with [method OpenXRAPIExtension.register_composition_layer_provider]. diff --git a/modules/vorbis/doc_classes/ResourceImporterOggVorbis.xml b/modules/vorbis/doc_classes/ResourceImporterOggVorbis.xml index dd6c181eaea..8ae63140f50 100644 --- a/modules/vorbis/doc_classes/ResourceImporterOggVorbis.xml +++ b/modules/vorbis/doc_classes/ResourceImporterOggVorbis.xml @@ -5,7 +5,7 @@ Ogg Vorbis is a lossy audio format, with better audio quality compared to [ResourceImporterMP3] at a given bitrate. - In most cases, it's recommended to use Ogg Vorbis over MP3. However, if you're using a MP3 sound source with no higher quality source available, then it's recommended to use the MP3 file directly to avoid double lossy compression. + In most cases, it's recommended to use Ogg Vorbis over MP3. However, if you're using an MP3 sound source with no higher quality source available, then it's recommended to use the MP3 file directly to avoid double lossy compression. Ogg Vorbis requires more CPU to decode than [ResourceImporterWAV]. If you need to play a lot of simultaneous sounds, it's recommended to use WAV for those sounds instead, especially if targeting low-end devices. diff --git a/platform/web/doc_classes/EditorExportPlatformWeb.xml b/platform/web/doc_classes/EditorExportPlatformWeb.xml index c759701d2f5..755308de9a9 100644 --- a/platform/web/doc_classes/EditorExportPlatformWeb.xml +++ b/platform/web/doc_classes/EditorExportPlatformWeb.xml @@ -84,7 +84,7 @@ If [code]true[/code], the exported game will support threads. It requires [url=https://web.dev/articles/coop-coep]a "cross-origin isolated" website[/url], which may be difficult to set up and is limited for security reasons (such as not being able to communicate with third-party websites). - If [code]false[/code], the exported game will not support threads. As a result, it is more prone to performance and audio issues, but will only require to be run on a HTTPS website. + If [code]false[/code], the exported game will not support threads. As a result, it is more prone to performance and audio issues, but will only require to be run on an HTTPS website. If [code]true[/code], allows textures to be optimized for desktop through the S3TC algorithm.