ghidra/gradle/processorProject.gradle

/* ###
 * IP: GHIDRA
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 * 
 *      http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*****************************************************************************************
	This file is a "mix-in" gradle script that individual gradle projects should include if they
	have processor definitions.
	
	A gradle project can add native code support by including the following it its build.gradle file:

		apply from: "$rootProject.projectDir/gradle/nativeProject.gradle"
 *****************************************************************************************/

/*****************************************************************************************
 *
 *  Create a configuration so the a dependency can be declared on the the software modeling
 *  project which is where the sleigh compiler java code lives.  This will be used to
 *  form the classpath of the sleighCompile task that follows.
 *
 *****************************************************************************************/
configurations {
	sleighConfig
}

dependencies {
	sleighConfig project(':SoftwareModeling')
}

/*****************************************************************************************
 *
 *  Sleigh compile options to be written to sleighArgs.txt in support of the following
 *  use cases:
 *    - Ant build using data/build.xml (development and distribution)
 *    - Eclipse Sleigh launcher (development only)
 *    - Ghidra runtime language rebuild (SleighLanguage.reloadLanguage; development and distribution)
 *    - Distribution build (sleighCompile task; development layout)
 *
 *  This list may be added to or replaced by a specific processor project/module.
 *
 *  Example: MIPS processor module dependency within a slaspec specified as:
 *
 *    @include "$(BaseDir)$(MIPS)/data/language/maips.sinc
 *
 *  with the corresponding MIPS definition specified within the sleighCompileOptions
 *  list specified within the module's build.gradle file:
 *
 *      sleighCompileOptions.add "-DMIPS=%%MIPS%%"
 *  -or-
 *      sleighCompileOptions = [
 *          "-l",
 *          "-DMIPS=%%MIPS%%"
 *      ]
 *
 *****************************************************************************************/
 ext.sleighCompileOptions = [ ]
 
 /*****************************************************************************************
 *
 *  Check for invalid sleighCompileOptions
 *
 *****************************************************************************************/
 def checkSleighCompileOptions() {
 	sleighCompileOptions.each { a ->
 		def arg = a.trim()
 		assert !(arg.startsWith("-a") || arg.startsWith("-i")) : "Invalid sleighCompileOption: ${arg}"
 	}
 }
 
/*****************************************************************************************
 *
 * Task to write sleigh compiler args for use with sleigh compiler.
 * Due to the possible presence of module dependency paths two different sleighArgs.txt
 * files are produced: one for development layout (build/tmp/sleighArgs.txt) and
 * one for distribution layout ([build/]data/sleighArgs.txt).  When invoking the 
 * Sleigh compiler and using a sleighArgs.txt file the appropriate 'BaseDir' property
 * must be specified.  Withing a distribution install 'BaseDir' must specifiy the 
 * path to the install directory while in a development layout 'BaseDir' must specify
 * the repos root directory which contains the 'ghidra' repo directory.
 *
 *****************************************************************************************/
task saveSleighArgs {
	def sleighArgsFile = file("build/data/sleighArgs.txt")
	def sleighArgsDevFile = file("build/tmp/sleighArgs.txt")
	outputs.files sleighArgsFile, sleighArgsDevFile
	outputs.upToDateWhen { false }
	doLast {
		checkSleighCompileOptions()
		sleighArgsFile.withWriter { out->
			sleighCompileOptions.each { a-> 
				out.println resolveSleighArg(a, false) 
			}
		}
		sleighArgsDevFile.withWriter { out->
			sleighCompileOptions.each { a-> 
				out.println resolveSleighArg(a, true) 
			}
		}
	}
}
rootProject.prepDev.dependsOn(saveSleighArgs)

apply plugin: 'base'
clean {
	delete file("build/data/sleighArgs.txt")
	delete file("build/tmp/sleighArgs.txt")
}

/*****************************************************************************************
 *
 *  Task to write sleigh build.xml file for use is development mode only.
 *
 *****************************************************************************************/
task writeSleighDevBuild {
	def templateFilePath = project(':BuildFiles').projectDir.toString() + "/sleighDevBuild.template"

	doLast {
		// Generate build.xml with injected classpath for running sleigh compiler
		def sleighDevClasspath = project(':SoftwareModeling').sourceSets.main.runtimeClasspath.collect { it.absolutePath }.join(':')		
		copy {
			into "data"
			from (templateFilePath) {
				rename { "build.xml" }
				expand ( [ 'gradleSleighDevClasspath': sleighDevClasspath ] )
			}
		}
	}
}

rootProject.prepDev.dependsOn(writeSleighDevBuild)

/*****************************************************************************************
 *
 *  Write sleigh build.xml file for each language module into assembleDistribution
 *
 *****************************************************************************************/
rootProject.assembleDistribution { 
	into (getZipPath(this.project)  + "/data") {
		from (rootProject.projectDir.toString() + "/GhidraBuild/BuildFiles/sleighDistBuild.template") {
	        rename { "build.xml" }
	    }
	}
}

/*****************************************************************************************
 *
 *  Task to compile language files using the sleigh compiler.
 *
 *****************************************************************************************/
task sleighCompile (type: JavaExec) {
	dependsOn saveSleighArgs
	group = rootProject.GHIDRA_GROUP
	description "  Compiles all the sleigh languages.    [gradle/processorProject.gradle]\n"
	 
	// define standard parameters for JavaExec
	classpath configurations.sleighConfig
	mainClass = 'ghidra.pcodeCPort.slgh_compile.SleighCompile'
	
	// Delay adding the directory argument until the first part of the execution phase, so
	// that any extra args added by a project override will be added to the arg list before
	// these arguments.
	// NOTE: projects should no longer add arguments to this task and should instead
	// add such args to the sleighCompileOptions list.
	doFirst {
		args "-i"
		args "./build/tmp/sleighArgs.txt"
		args "-DBaseDir=${getProjectReposRootPath()}"
		args '-a'
		args './data/languages'
	}
	
	jvmArgs '-Xmx2048M'	
}

// The task that copies the common files to the distribution folder must depend on
// the sleigh tasks before executing.
rootProject.assembleDistribution.dependsOn sleighCompile

// Add in this projects sleighCompile to the allSleighCompile task
rootProject.allSleighCompile.dependsOn sleighCompile

/*****************************************************************************************
 *
 *  Task to clean out the compile language files (*.sla)
 *
 *****************************************************************************************/
task cleanSleigh  {
	group rootProject.GHIDRA_GROUP
	description "Removes all the compile sleigh language files (*.sla).   [gradle/processorProject.gradle]\n"
 	doLast {
		def deleteTree = fileTree(dir: "data/languages", include: "*.sla")
		deleteTree.each { File file ->
			delete file
		}
	}
}

/****************************************************************************************
 *
 * Set up inputs and outputs for the sleighCompile task so that languages only get build
 * when the inputs change
 *
 * sleigh compile outputs to same directory as input. All files except .sla are input
 *
 ******************************************************************************************/
def taskInputs  = fileTree(dir: 'data/languages', exclude: '**/*.sla')
def taskOutputs = fileTree(dir: 'data/languages', include: '**/*.sla')
	
// define the sleigh compile inputs and outputs so that gradle can check if they need building
sleighCompile.inputs.files (taskInputs)
sleighCompile.outputs.files (taskOutputs)

// define the sleigh compile inputs to saveSleighArgs to limit task creation to language modules
saveSleighArgs.inputs.files (taskInputs)

/*****************************************************************************************
 *
 * Gets the absolute repos root directory path with a trailing File separator.
 * This path may be used for specifying 'BaseDir' to the sleigh compiler within a 
 * development layout.
 *
 *****************************************************************************************/
def getProjectReposRootPath() {
	return rootProject.projectDir.getParent() + File.separator
}

/*****************************************************************************************
 *
 * Filter a sleigh compiler argument replacing any project/module reference of the form
 * %%MODULE%% witha that MODULE's relative path.  If useDevPath is true the path will
 * include the containing repo directory (e.g., ghidra/Ghidra/...), otherwise the
 * path should start at the application root 'Ghidra/'.  Only a single replacement per
 * arg is supported.
 *
 * This mechanism relies on the relative depth of a language module project within a
 * repository directory hierarchy.  In general language module projects must reside 
 * within the directory Ghidra/Processors.
 *
 *****************************************************************************************/
def resolveSleighArg(String arg, boolean useDevPath) {
	arg = arg.trim()
	int index = arg.indexOf("%%")
	if (index < 0) {
		return arg
	}
	String newArg = arg.substring(0, index)
	String tail = arg.substring(index+2)
	index = tail.indexOf("%%")
	assert index > 0 : "Badly formed sleigh path-replacment option: ${arg}"
	String moduleName = tail.substring(0, index)
	tail = tail.substring(index+2)
	def moduleProject = project(":${moduleName}")
	def modulePath
	if (useDevPath) {
		// first path element is the containing repo directory
		modulePath = moduleProject.projectDir.absolutePath
		modulePath = modulePath.substring(getProjectReposRootPath().length())
	}
	else {
		// first path element is the Ghidra directory
		modulePath =  getZipPath(moduleProject)
	}
	newArg += modulePath
	newArg += tail
	return newArg
}