linux/kernel/printk/nbcon.c
Thomas Gleixner 9757acd0a7 printk: nbcon: Allow drivers to mark unsafe regions and check state
For the write_atomic callback, the console driver may have unsafe
regions that need to be appropriately marked. Provide functions
that accept the nbcon_write_context struct to allow for the driver
to enter and exit unsafe regions.

Also provide a function for drivers to check if they are still the
owner of the console.

Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-9-john.ogness@linutronix.de
2023-09-18 17:03:46 +02:00

1030 lines
31 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
// Copyright (C) 2022 Linutronix GmbH, John Ogness
// Copyright (C) 2022 Intel, Thomas Gleixner
#include <linux/kernel.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include "internal.h"
/*
* Printk console printing implementation for consoles which does not depend
* on the legacy style console_lock mechanism.
*
* The state of the console is maintained in the "nbcon_state" atomic
* variable.
*
* The console is locked when:
*
* - The 'prio' field contains the priority of the context that owns the
* console. Only higher priority contexts are allowed to take over the
* lock. A value of 0 (NBCON_PRIO_NONE) means the console is not locked.
*
* - The 'cpu' field denotes on which CPU the console is locked. It is used
* to prevent busy waiting on the same CPU. Also it informs the lock owner
* that it has lost the lock in a more complex scenario when the lock was
* taken over by a higher priority context, released, and taken on another
* CPU with the same priority as the interrupted owner.
*
* The acquire mechanism uses a few more fields:
*
* - The 'req_prio' field is used by the handover approach to make the
* current owner aware that there is a context with a higher priority
* waiting for the friendly handover.
*
* - The 'unsafe' field allows to take over the console in a safe way in the
* middle of emitting a message. The field is set only when accessing some
* shared resources or when the console device is manipulated. It can be
* cleared, for example, after emitting one character when the console
* device is in a consistent state.
*
* - The 'unsafe_takeover' field is set when a hostile takeover took the
* console in an unsafe state. The console will stay in the unsafe state
* until re-initialized.
*
* The acquire mechanism uses three approaches:
*
* 1) Direct acquire when the console is not owned or is owned by a lower
* priority context and is in a safe state.
*
* 2) Friendly handover mechanism uses a request/grant handshake. It is used
* when the current owner has lower priority and the console is in an
* unsafe state.
*
* The requesting context:
*
* a) Sets its priority into the 'req_prio' field.
*
* b) Waits (with a timeout) for the owning context to unlock the
* console.
*
* c) Takes the lock and clears the 'req_prio' field.
*
* The owning context:
*
* a) Observes the 'req_prio' field set on exit from the unsafe
* console state.
*
* b) Gives up console ownership by clearing the 'prio' field.
*
* 3) Unsafe hostile takeover allows to take over the lock even when the
* console is an unsafe state. It is used only in panic() by the final
* attempt to flush consoles in a try and hope mode.
*
* Note that separate record buffers are used in panic(). As a result,
* the messages can be read and formatted without any risk even after
* using the hostile takeover in unsafe state.
*
* The release function simply clears the 'prio' field.
*
* All operations on @console::nbcon_state are atomic cmpxchg based to
* handle concurrency.
*
* The acquire/release functions implement only minimal policies:
*
* - Preference for higher priority contexts.
* - Protection of the panic CPU.
*
* All other policy decisions must be made at the call sites:
*
* - What is marked as an unsafe section.
* - Whether to spin-wait if there is already an owner and the console is
* in an unsafe state.
* - Whether to attempt an unsafe hostile takeover.
*
* The design allows to implement the well known:
*
* acquire()
* output_one_printk_record()
* release()
*
* The output of one printk record might be interrupted with a higher priority
* context. The new owner is supposed to reprint the entire interrupted record
* from scratch.
*/
/**
* nbcon_state_set - Helper function to set the console state
* @con: Console to update
* @new: The new state to write
*
* Only to be used when the console is not yet or no longer visible in the
* system. Otherwise use nbcon_state_try_cmpxchg().
*/
static inline void nbcon_state_set(struct console *con, struct nbcon_state *new)
{
atomic_set(&ACCESS_PRIVATE(con, nbcon_state), new->atom);
}
/**
* nbcon_state_read - Helper function to read the console state
* @con: Console to read
* @state: The state to store the result
*/
static inline void nbcon_state_read(struct console *con, struct nbcon_state *state)
{
state->atom = atomic_read(&ACCESS_PRIVATE(con, nbcon_state));
}
/**
* nbcon_state_try_cmpxchg() - Helper function for atomic_try_cmpxchg() on console state
* @con: Console to update
* @cur: Old/expected state
* @new: New state
*
* Return: True on success. False on fail and @cur is updated.
*/
static inline bool nbcon_state_try_cmpxchg(struct console *con, struct nbcon_state *cur,
struct nbcon_state *new)
{
return atomic_try_cmpxchg(&ACCESS_PRIVATE(con, nbcon_state), &cur->atom, new->atom);
}
#ifdef CONFIG_64BIT
#define __seq_to_nbcon_seq(seq) (seq)
#define __nbcon_seq_to_seq(seq) (seq)
#else /* CONFIG_64BIT */
#define __seq_to_nbcon_seq(seq) ((u32)seq)
static inline u64 __nbcon_seq_to_seq(u32 nbcon_seq)
{
u64 seq;
u64 rb_next_seq;
/*
* The provided sequence is only the lower 32 bits of the ringbuffer
* sequence. It needs to be expanded to 64bit. Get the next sequence
* number from the ringbuffer and fold it.
*
* Having a 32bit representation in the console is sufficient.
* If a console ever gets more than 2^31 records behind
* the ringbuffer then this is the least of the problems.
*
* Also the access to the ring buffer is always safe.
*/
rb_next_seq = prb_next_seq(prb);
seq = rb_next_seq - ((u32)rb_next_seq - nbcon_seq);
return seq;
}
#endif /* CONFIG_64BIT */
/**
* nbcon_seq_read - Read the current console sequence
* @con: Console to read the sequence of
*
* Return: Sequence number of the next record to print on @con.
*/
u64 nbcon_seq_read(struct console *con)
{
unsigned long nbcon_seq = atomic_long_read(&ACCESS_PRIVATE(con, nbcon_seq));
return __nbcon_seq_to_seq(nbcon_seq);
}
/**
* nbcon_seq_force - Force console sequence to a specific value
* @con: Console to work on
* @seq: Sequence number value to set
*
* Only to be used during init (before registration) or in extreme situations
* (such as panic with CONSOLE_REPLAY_ALL).
*/
void nbcon_seq_force(struct console *con, u64 seq)
{
/*
* If the specified record no longer exists, the oldest available record
* is chosen. This is especially important on 32bit systems because only
* the lower 32 bits of the sequence number are stored. The upper 32 bits
* are derived from the sequence numbers available in the ringbuffer.
*/
u64 valid_seq = max_t(u64, seq, prb_first_valid_seq(prb));
atomic_long_set(&ACCESS_PRIVATE(con, nbcon_seq), __seq_to_nbcon_seq(valid_seq));
/* Clear con->seq since nbcon consoles use con->nbcon_seq instead. */
con->seq = 0;
}
/**
* nbcon_seq_try_update - Try to update the console sequence number
* @ctxt: Pointer to an acquire context that contains
* all information about the acquire mode
* @new_seq: The new sequence number to set
*
* @ctxt->seq is updated to the new value of @con::nbcon_seq (expanded to
* the 64bit value). This could be a different value than @new_seq if
* nbcon_seq_force() was used or the current context no longer owns the
* console. In the later case, it will stop printing anyway.
*/
static void nbcon_seq_try_update(struct nbcon_context *ctxt, u64 new_seq)
{
unsigned long nbcon_seq = __seq_to_nbcon_seq(ctxt->seq);
struct console *con = ctxt->console;
if (atomic_long_try_cmpxchg(&ACCESS_PRIVATE(con, nbcon_seq), &nbcon_seq,
__seq_to_nbcon_seq(new_seq))) {
ctxt->seq = new_seq;
} else {
ctxt->seq = nbcon_seq_read(con);
}
}
/**
* nbcon_context_try_acquire_direct - Try to acquire directly
* @ctxt: The context of the caller
* @cur: The current console state
*
* Acquire the console when it is released. Also acquire the console when
* the current owner has a lower priority and the console is in a safe state.
*
* Return: 0 on success. Otherwise, an error code on failure. Also @cur
* is updated to the latest state when failed to modify it.
*
* Errors:
*
* -EPERM: A panic is in progress and this is not the panic CPU.
* Or the current owner or waiter has the same or higher
* priority. No acquire method can be successful in
* this case.
*
* -EBUSY: The current owner has a lower priority but the console
* in an unsafe state. The caller should try using
* the handover acquire method.
*/
static int nbcon_context_try_acquire_direct(struct nbcon_context *ctxt,
struct nbcon_state *cur)
{
unsigned int cpu = smp_processor_id();
struct console *con = ctxt->console;
struct nbcon_state new;
do {
if (other_cpu_in_panic())
return -EPERM;
if (ctxt->prio <= cur->prio || ctxt->prio <= cur->req_prio)
return -EPERM;
if (cur->unsafe)
return -EBUSY;
/*
* The console should never be safe for a direct acquire
* if an unsafe hostile takeover has ever happened.
*/
WARN_ON_ONCE(cur->unsafe_takeover);
new.atom = cur->atom;
new.prio = ctxt->prio;
new.req_prio = NBCON_PRIO_NONE;
new.unsafe = cur->unsafe_takeover;
new.cpu = cpu;
} while (!nbcon_state_try_cmpxchg(con, cur, &new));
return 0;
}
static bool nbcon_waiter_matches(struct nbcon_state *cur, int expected_prio)
{
/*
* The request context is well defined by the @req_prio because:
*
* - Only a context with a higher priority can take over the request.
* - There are only three priorities.
* - Only one CPU is allowed to request PANIC priority.
* - Lower priorities are ignored during panic() until reboot.
*
* As a result, the following scenario is *not* possible:
*
* 1. Another context with a higher priority directly takes ownership.
* 2. The higher priority context releases the ownership.
* 3. A lower priority context takes the ownership.
* 4. Another context with the same priority as this context
* creates a request and starts waiting.
*/
return (cur->req_prio == expected_prio);
}
/**
* nbcon_context_try_acquire_requested - Try to acquire after having
* requested a handover
* @ctxt: The context of the caller
* @cur: The current console state
*
* This is a helper function for nbcon_context_try_acquire_handover().
* It is called when the console is in an unsafe state. The current
* owner will release the console on exit from the unsafe region.
*
* Return: 0 on success and @cur is updated to the new console state.
* Otherwise an error code on failure.
*
* Errors:
*
* -EPERM: A panic is in progress and this is not the panic CPU
* or this context is no longer the waiter.
*
* -EBUSY: The console is still locked. The caller should
* continue waiting.
*
* Note: The caller must still remove the request when an error has occurred
* except when this context is no longer the waiter.
*/
static int nbcon_context_try_acquire_requested(struct nbcon_context *ctxt,
struct nbcon_state *cur)
{
unsigned int cpu = smp_processor_id();
struct console *con = ctxt->console;
struct nbcon_state new;
/* Note that the caller must still remove the request! */
if (other_cpu_in_panic())
return -EPERM;
/*
* Note that the waiter will also change if there was an unsafe
* hostile takeover.
*/
if (!nbcon_waiter_matches(cur, ctxt->prio))
return -EPERM;
/* If still locked, caller should continue waiting. */
if (cur->prio != NBCON_PRIO_NONE)
return -EBUSY;
/*
* The previous owner should have never released ownership
* in an unsafe region.
*/
WARN_ON_ONCE(cur->unsafe);
new.atom = cur->atom;
new.prio = ctxt->prio;
new.req_prio = NBCON_PRIO_NONE;
new.unsafe = cur->unsafe_takeover;
new.cpu = cpu;
if (!nbcon_state_try_cmpxchg(con, cur, &new)) {
/*
* The acquire could fail only when it has been taken
* over by a higher priority context.
*/
WARN_ON_ONCE(nbcon_waiter_matches(cur, ctxt->prio));
return -EPERM;
}
/* Handover success. This context now owns the console. */
return 0;
}
/**
* nbcon_context_try_acquire_handover - Try to acquire via handover
* @ctxt: The context of the caller
* @cur: The current console state
*
* The function must be called only when the context has higher priority
* than the current owner and the console is in an unsafe state.
* It is the case when nbcon_context_try_acquire_direct() returns -EBUSY.
*
* The function sets "req_prio" field to make the current owner aware of
* the request. Then it waits until the current owner releases the console,
* or an even higher context takes over the request, or timeout expires.
*
* The current owner checks the "req_prio" field on exit from the unsafe
* region and releases the console. It does not touch the "req_prio" field
* so that the console stays reserved for the waiter.
*
* Return: 0 on success. Otherwise, an error code on failure. Also @cur
* is updated to the latest state when failed to modify it.
*
* Errors:
*
* -EPERM: A panic is in progress and this is not the panic CPU.
* Or a higher priority context has taken over the
* console or the handover request.
*
* -EBUSY: The current owner is on the same CPU so that the hand
* shake could not work. Or the current owner is not
* willing to wait (zero timeout). Or the console does
* not enter the safe state before timeout passed. The
* caller might still use the unsafe hostile takeover
* when allowed.
*
* -EAGAIN: @cur has changed when creating the handover request.
* The caller should retry with direct acquire.
*/
static int nbcon_context_try_acquire_handover(struct nbcon_context *ctxt,
struct nbcon_state *cur)
{
unsigned int cpu = smp_processor_id();
struct console *con = ctxt->console;
struct nbcon_state new;
int timeout;
int request_err = -EBUSY;
/*
* Check that the handover is called when the direct acquire failed
* with -EBUSY.
*/
WARN_ON_ONCE(ctxt->prio <= cur->prio || ctxt->prio <= cur->req_prio);
WARN_ON_ONCE(!cur->unsafe);
/* Handover is not possible on the same CPU. */
if (cur->cpu == cpu)
return -EBUSY;
/*
* Console stays unsafe after an unsafe takeover until re-initialized.
* Waiting is not going to help in this case.
*/
if (cur->unsafe_takeover)
return -EBUSY;
/* Is the caller willing to wait? */
if (ctxt->spinwait_max_us == 0)
return -EBUSY;
/*
* Setup a request for the handover. The caller should try to acquire
* the console directly when the current state has been modified.
*/
new.atom = cur->atom;
new.req_prio = ctxt->prio;
if (!nbcon_state_try_cmpxchg(con, cur, &new))
return -EAGAIN;
cur->atom = new.atom;
/* Wait until there is no owner and then acquire the console. */
for (timeout = ctxt->spinwait_max_us; timeout >= 0; timeout--) {
/* On successful acquire, this request is cleared. */
request_err = nbcon_context_try_acquire_requested(ctxt, cur);
if (!request_err)
return 0;
/*
* If the acquire should be aborted, it must be ensured
* that the request is removed before returning to caller.
*/
if (request_err == -EPERM)
break;
udelay(1);
/* Re-read the state because some time has passed. */
nbcon_state_read(con, cur);
}
/* Timed out or aborted. Carefully remove handover request. */
do {
/*
* No need to remove request if there is a new waiter. This
* can only happen if a higher priority context has taken over
* the console or the handover request.
*/
if (!nbcon_waiter_matches(cur, ctxt->prio))
return -EPERM;
/* Unset request for handover. */
new.atom = cur->atom;
new.req_prio = NBCON_PRIO_NONE;
if (nbcon_state_try_cmpxchg(con, cur, &new)) {
/*
* Request successfully unset. Report failure of
* acquiring via handover.
*/
cur->atom = new.atom;
return request_err;
}
/*
* Unable to remove request. Try to acquire in case
* the owner has released the lock.
*/
} while (nbcon_context_try_acquire_requested(ctxt, cur));
/* Lucky timing. The acquire succeeded while removing the request. */
return 0;
}
/**
* nbcon_context_try_acquire_hostile - Acquire via unsafe hostile takeover
* @ctxt: The context of the caller
* @cur: The current console state
*
* Acquire the console even in the unsafe state.
*
* It can be permitted by setting the 'allow_unsafe_takeover' field only
* by the final attempt to flush messages in panic().
*
* Return: 0 on success. -EPERM when not allowed by the context.
*/
static int nbcon_context_try_acquire_hostile(struct nbcon_context *ctxt,
struct nbcon_state *cur)
{
unsigned int cpu = smp_processor_id();
struct console *con = ctxt->console;
struct nbcon_state new;
if (!ctxt->allow_unsafe_takeover)
return -EPERM;
/* Ensure caller is allowed to perform unsafe hostile takeovers. */
if (WARN_ON_ONCE(ctxt->prio != NBCON_PRIO_PANIC))
return -EPERM;
/*
* Check that try_acquire_direct() and try_acquire_handover() returned
* -EBUSY in the right situation.
*/
WARN_ON_ONCE(ctxt->prio <= cur->prio || ctxt->prio <= cur->req_prio);
WARN_ON_ONCE(cur->unsafe != true);
do {
new.atom = cur->atom;
new.cpu = cpu;
new.prio = ctxt->prio;
new.unsafe |= cur->unsafe_takeover;
new.unsafe_takeover |= cur->unsafe;
} while (!nbcon_state_try_cmpxchg(con, cur, &new));
return 0;
}
static struct printk_buffers panic_nbcon_pbufs;
/**
* nbcon_context_try_acquire - Try to acquire nbcon console
* @ctxt: The context of the caller
*
* Return: True if the console was acquired. False otherwise.
*
* If the caller allowed an unsafe hostile takeover, on success the
* caller should check the current console state to see if it is
* in an unsafe state. Otherwise, on success the caller may assume
* the console is not in an unsafe state.
*/
__maybe_unused
static bool nbcon_context_try_acquire(struct nbcon_context *ctxt)
{
unsigned int cpu = smp_processor_id();
struct console *con = ctxt->console;
struct nbcon_state cur;
int err;
nbcon_state_read(con, &cur);
try_again:
err = nbcon_context_try_acquire_direct(ctxt, &cur);
if (err != -EBUSY)
goto out;
err = nbcon_context_try_acquire_handover(ctxt, &cur);
if (err == -EAGAIN)
goto try_again;
if (err != -EBUSY)
goto out;
err = nbcon_context_try_acquire_hostile(ctxt, &cur);
out:
if (err)
return false;
/* Acquire succeeded. */
/* Assign the appropriate buffer for this context. */
if (atomic_read(&panic_cpu) == cpu)
ctxt->pbufs = &panic_nbcon_pbufs;
else
ctxt->pbufs = con->pbufs;
/* Set the record sequence for this context to print. */
ctxt->seq = nbcon_seq_read(ctxt->console);
return true;
}
static bool nbcon_owner_matches(struct nbcon_state *cur, int expected_cpu,
int expected_prio)
{
/*
* Since consoles can only be acquired by higher priorities,
* owning contexts are uniquely identified by @prio. However,
* since contexts can unexpectedly lose ownership, it is
* possible that later another owner appears with the same
* priority. For this reason @cpu is also needed.
*/
if (cur->prio != expected_prio)
return false;
if (cur->cpu != expected_cpu)
return false;
return true;
}
/**
* nbcon_context_release - Release the console
* @ctxt: The nbcon context from nbcon_context_try_acquire()
*/
static void nbcon_context_release(struct nbcon_context *ctxt)
{
unsigned int cpu = smp_processor_id();
struct console *con = ctxt->console;
struct nbcon_state cur;
struct nbcon_state new;
nbcon_state_read(con, &cur);
do {
if (!nbcon_owner_matches(&cur, cpu, ctxt->prio))
break;
new.atom = cur.atom;
new.prio = NBCON_PRIO_NONE;
/*
* If @unsafe_takeover is set, it is kept set so that
* the state remains permanently unsafe.
*/
new.unsafe |= cur.unsafe_takeover;
} while (!nbcon_state_try_cmpxchg(con, &cur, &new));
ctxt->pbufs = NULL;
}
/**
* nbcon_context_can_proceed - Check whether ownership can proceed
* @ctxt: The nbcon context from nbcon_context_try_acquire()
* @cur: The current console state
*
* Return: True if this context still owns the console. False if
* ownership was handed over or taken.
*
* Must be invoked when entering the unsafe state to make sure that it still
* owns the lock. Also must be invoked when exiting the unsafe context
* to eventually free the lock for a higher priority context which asked
* for the friendly handover.
*
* It can be called inside an unsafe section when the console is just
* temporary in safe state instead of exiting and entering the unsafe
* state.
*
* Also it can be called in the safe context before doing an expensive
* safe operation. It does not make sense to do the operation when
* a higher priority context took the lock.
*
* When this function returns false then the calling context no longer owns
* the console and is no longer allowed to go forward. In this case it must
* back out immediately and carefully. The buffer content is also no longer
* trusted since it no longer belongs to the calling context.
*/
static bool nbcon_context_can_proceed(struct nbcon_context *ctxt, struct nbcon_state *cur)
{
unsigned int cpu = smp_processor_id();
/* Make sure this context still owns the console. */
if (!nbcon_owner_matches(cur, cpu, ctxt->prio))
return false;
/* The console owner can proceed if there is no waiter. */
if (cur->req_prio == NBCON_PRIO_NONE)
return true;
/*
* A console owner within an unsafe region is always allowed to
* proceed, even if there are waiters. It can perform a handover
* when exiting the unsafe region. Otherwise the waiter will
* need to perform an unsafe hostile takeover.
*/
if (cur->unsafe)
return true;
/* Waiters always have higher priorities than owners. */
WARN_ON_ONCE(cur->req_prio <= cur->prio);
/*
* Having a safe point for take over and eventually a few
* duplicated characters or a full line is way better than a
* hostile takeover. Post processing can take care of the garbage.
* Release and hand over.
*/
nbcon_context_release(ctxt);
/*
* It is not clear whether the waiter really took over ownership. The
* outermost callsite must make the final decision whether console
* ownership is needed for it to proceed. If yes, it must reacquire
* ownership (possibly hostile) before carefully proceeding.
*
* The calling context no longer owns the console so go back all the
* way instead of trying to implement reacquire heuristics in tons of
* places.
*/
return false;
}
/**
* nbcon_can_proceed - Check whether ownership can proceed
* @wctxt: The write context that was handed to the write function
*
* Return: True if this context still owns the console. False if
* ownership was handed over or taken.
*
* It is used in nbcon_enter_unsafe() to make sure that it still owns the
* lock. Also it is used in nbcon_exit_unsafe() to eventually free the lock
* for a higher priority context which asked for the friendly handover.
*
* It can be called inside an unsafe section when the console is just
* temporary in safe state instead of exiting and entering the unsafe state.
*
* Also it can be called in the safe context before doing an expensive safe
* operation. It does not make sense to do the operation when a higher
* priority context took the lock.
*
* When this function returns false then the calling context no longer owns
* the console and is no longer allowed to go forward. In this case it must
* back out immediately and carefully. The buffer content is also no longer
* trusted since it no longer belongs to the calling context.
*/
bool nbcon_can_proceed(struct nbcon_write_context *wctxt)
{
struct nbcon_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
struct console *con = ctxt->console;
struct nbcon_state cur;
nbcon_state_read(con, &cur);
return nbcon_context_can_proceed(ctxt, &cur);
}
EXPORT_SYMBOL_GPL(nbcon_can_proceed);
#define nbcon_context_enter_unsafe(c) __nbcon_context_update_unsafe(c, true)
#define nbcon_context_exit_unsafe(c) __nbcon_context_update_unsafe(c, false)
/**
* __nbcon_context_update_unsafe - Update the unsafe bit in @con->nbcon_state
* @ctxt: The nbcon context from nbcon_context_try_acquire()
* @unsafe: The new value for the unsafe bit
*
* Return: True if the unsafe state was updated and this context still
* owns the console. Otherwise false if ownership was handed
* over or taken.
*
* This function allows console owners to modify the unsafe status of the
* console.
*
* When this function returns false then the calling context no longer owns
* the console and is no longer allowed to go forward. In this case it must
* back out immediately and carefully. The buffer content is also no longer
* trusted since it no longer belongs to the calling context.
*
* Internal helper to avoid duplicated code.
*/
static bool __nbcon_context_update_unsafe(struct nbcon_context *ctxt, bool unsafe)
{
struct console *con = ctxt->console;
struct nbcon_state cur;
struct nbcon_state new;
nbcon_state_read(con, &cur);
do {
/*
* The unsafe bit must not be cleared if an
* unsafe hostile takeover has occurred.
*/
if (!unsafe && cur.unsafe_takeover)
goto out;
if (!nbcon_context_can_proceed(ctxt, &cur))
return false;
new.atom = cur.atom;
new.unsafe = unsafe;
} while (!nbcon_state_try_cmpxchg(con, &cur, &new));
cur.atom = new.atom;
out:
return nbcon_context_can_proceed(ctxt, &cur);
}
/**
* nbcon_enter_unsafe - Enter an unsafe region in the driver
* @wctxt: The write context that was handed to the write function
*
* Return: True if this context still owns the console. False if
* ownership was handed over or taken.
*
* When this function returns false then the calling context no longer owns
* the console and is no longer allowed to go forward. In this case it must
* back out immediately and carefully. The buffer content is also no longer
* trusted since it no longer belongs to the calling context.
*/
bool nbcon_enter_unsafe(struct nbcon_write_context *wctxt)
{
struct nbcon_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
return nbcon_context_enter_unsafe(ctxt);
}
EXPORT_SYMBOL_GPL(nbcon_enter_unsafe);
/**
* nbcon_exit_unsafe - Exit an unsafe region in the driver
* @wctxt: The write context that was handed to the write function
*
* Return: True if this context still owns the console. False if
* ownership was handed over or taken.
*
* When this function returns false then the calling context no longer owns
* the console and is no longer allowed to go forward. In this case it must
* back out immediately and carefully. The buffer content is also no longer
* trusted since it no longer belongs to the calling context.
*/
bool nbcon_exit_unsafe(struct nbcon_write_context *wctxt)
{
struct nbcon_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
return nbcon_context_exit_unsafe(ctxt);
}
EXPORT_SYMBOL_GPL(nbcon_exit_unsafe);
/**
* nbcon_emit_next_record - Emit a record in the acquired context
* @wctxt: The write context that will be handed to the write function
*
* Return: True if this context still owns the console. False if
* ownership was handed over or taken.
*
* When this function returns false then the calling context no longer owns
* the console and is no longer allowed to go forward. In this case it must
* back out immediately and carefully. The buffer content is also no longer
* trusted since it no longer belongs to the calling context. If the caller
* wants to do more it must reacquire the console first.
*
* When true is returned, @wctxt->ctxt.backlog indicates whether there are
* still records pending in the ringbuffer,
*/
__maybe_unused
static bool nbcon_emit_next_record(struct nbcon_write_context *wctxt)
{
struct nbcon_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
struct console *con = ctxt->console;
bool is_extended = console_srcu_read_flags(con) & CON_EXTENDED;
struct printk_message pmsg = {
.pbufs = ctxt->pbufs,
};
unsigned long con_dropped;
struct nbcon_state cur;
unsigned long dropped;
bool done;
/*
* The printk buffers are filled within an unsafe section. This
* prevents NBCON_PRIO_NORMAL and NBCON_PRIO_EMERGENCY from
* clobbering each other.
*/
if (!nbcon_context_enter_unsafe(ctxt))
return false;
ctxt->backlog = printk_get_next_message(&pmsg, ctxt->seq, is_extended, true);
if (!ctxt->backlog)
return nbcon_context_exit_unsafe(ctxt);
/*
* @con->dropped is not protected in case of an unsafe hostile
* takeover. In that situation the update can be racy so
* annotate it accordingly.
*/
con_dropped = data_race(READ_ONCE(con->dropped));
dropped = con_dropped + pmsg.dropped;
if (dropped && !is_extended)
console_prepend_dropped(&pmsg, dropped);
if (!nbcon_context_exit_unsafe(ctxt))
return false;
/* For skipped records just update seq/dropped in @con. */
if (pmsg.outbuf_len == 0)
goto update_con;
/* Initialize the write context for driver callbacks. */
wctxt->outbuf = &pmsg.pbufs->outbuf[0];
wctxt->len = pmsg.outbuf_len;
nbcon_state_read(con, &cur);
wctxt->unsafe_takeover = cur.unsafe_takeover;
if (con->write_atomic) {
done = con->write_atomic(con, wctxt);
} else {
nbcon_context_release(ctxt);
WARN_ON_ONCE(1);
done = false;
}
/* If not done, the emit was aborted. */
if (!done)
return false;
/*
* Since any dropped message was successfully output, reset the
* dropped count for the console.
*/
dropped = 0;
update_con:
/*
* The dropped count and the sequence number are updated within an
* unsafe section. This limits update races to the panic context and
* allows the panic context to win.
*/
if (!nbcon_context_enter_unsafe(ctxt))
return false;
if (dropped != con_dropped) {
/* Counterpart to the READ_ONCE() above. */
WRITE_ONCE(con->dropped, dropped);
}
nbcon_seq_try_update(ctxt, pmsg.seq + 1);
return nbcon_context_exit_unsafe(ctxt);
}
/**
* nbcon_alloc - Allocate buffers needed by the nbcon console
* @con: Console to allocate buffers for
*
* Return: True on success. False otherwise and the console cannot
* be used.
*
* This is not part of nbcon_init() because buffer allocation must
* be performed earlier in the console registration process.
*/
bool nbcon_alloc(struct console *con)
{
if (con->flags & CON_BOOT) {
/*
* Boot console printing is synchronized with legacy console
* printing, so boot consoles can share the same global printk
* buffers.
*/
con->pbufs = &printk_shared_pbufs;
} else {
con->pbufs = kmalloc(sizeof(*con->pbufs), GFP_KERNEL);
if (!con->pbufs) {
con_printk(KERN_ERR, con, "failed to allocate printing buffer\n");
return false;
}
}
return true;
}
/**
* nbcon_init - Initialize the nbcon console specific data
* @con: Console to initialize
*
* nbcon_alloc() *must* be called and succeed before this function
* is called.
*
* This function expects that the legacy @con->seq has been set.
*/
void nbcon_init(struct console *con)
{
struct nbcon_state state = { };
/* nbcon_alloc() must have been called and successful! */
BUG_ON(!con->pbufs);
nbcon_seq_force(con, con->seq);
nbcon_state_set(con, &state);
}
/**
* nbcon_free - Free and cleanup the nbcon console specific data
* @con: Console to free/cleanup nbcon data
*/
void nbcon_free(struct console *con)
{
struct nbcon_state state = { };
nbcon_state_set(con, &state);
/* Boot consoles share global printk buffers. */
if (!(con->flags & CON_BOOT))
kfree(con->pbufs);
con->pbufs = NULL;
}