linux/drivers/irqchip/irq-ftintc010.c
Linus Walleij 390d2d490b irqchip/faraday: Replace moxa with ftintc010
The Moxa Art interrupt controller is very very likely just an instance
of the Faraday FTINTC010 interrupt controller from Faraday Technology.
An indication would be its close association with the FA526 ARM core
and the fact that the register layout is the same.

The implementation in irq-moxart.c can probably be right off replaced
with the irq-ftintc010.c driver by adding a compatible string, selecting
this irqchip from the machine and run.

As a bonus we have an irqchip driver supporting high/low and
rising/falling edges for the Moxa Art, and shared code with the Gemini
platform.

Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07 10:36:30 +01:00

195 lines
5.4 KiB
C

/*
* irqchip for the Faraday Technology FTINTC010 Copyright (C) 2017 Linus
* Walleij <linus.walleij@linaro.org>
*
* Based on arch/arm/mach-gemini/irq.c
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@gmail.com>
*/
#include <linux/bitops.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/irqchip/versatile-fpga.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/cpu.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
#define FT010_NUM_IRQS 32
#define FT010_IRQ_SOURCE(base_addr) (base_addr + 0x00)
#define FT010_IRQ_MASK(base_addr) (base_addr + 0x04)
#define FT010_IRQ_CLEAR(base_addr) (base_addr + 0x08)
/* Selects level- or edge-triggered */
#define FT010_IRQ_MODE(base_addr) (base_addr + 0x0C)
/* Selects active low/high or falling/rising edge */
#define FT010_IRQ_POLARITY(base_addr) (base_addr + 0x10)
#define FT010_IRQ_STATUS(base_addr) (base_addr + 0x14)
#define FT010_FIQ_SOURCE(base_addr) (base_addr + 0x20)
#define FT010_FIQ_MASK(base_addr) (base_addr + 0x24)
#define FT010_FIQ_CLEAR(base_addr) (base_addr + 0x28)
#define FT010_FIQ_MODE(base_addr) (base_addr + 0x2C)
#define FT010_FIQ_POLARITY(base_addr) (base_addr + 0x30)
#define FT010_FIQ_STATUS(base_addr) (base_addr + 0x34)
/**
* struct ft010_irq_data - irq data container for the Faraday IRQ controller
* @base: memory offset in virtual memory
* @chip: chip container for this instance
* @domain: IRQ domain for this instance
*/
struct ft010_irq_data {
void __iomem *base;
struct irq_chip chip;
struct irq_domain *domain;
};
static void ft010_irq_mask(struct irq_data *d)
{
struct ft010_irq_data *f = irq_data_get_irq_chip_data(d);
unsigned int mask;
mask = readl(FT010_IRQ_MASK(f->base));
mask &= ~BIT(irqd_to_hwirq(d));
writel(mask, FT010_IRQ_MASK(f->base));
}
static void ft010_irq_unmask(struct irq_data *d)
{
struct ft010_irq_data *f = irq_data_get_irq_chip_data(d);
unsigned int mask;
mask = readl(FT010_IRQ_MASK(f->base));
mask |= BIT(irqd_to_hwirq(d));
writel(mask, FT010_IRQ_MASK(f->base));
}
static void ft010_irq_ack(struct irq_data *d)
{
struct ft010_irq_data *f = irq_data_get_irq_chip_data(d);
writel(BIT(irqd_to_hwirq(d)), FT010_IRQ_CLEAR(f->base));
}
static int ft010_irq_set_type(struct irq_data *d, unsigned int trigger)
{
struct ft010_irq_data *f = irq_data_get_irq_chip_data(d);
int offset = irqd_to_hwirq(d);
u32 mode, polarity;
mode = readl(FT010_IRQ_MODE(f->base));
polarity = readl(FT010_IRQ_POLARITY(f->base));
if (trigger & (IRQ_TYPE_LEVEL_LOW)) {
irq_set_handler_locked(d, handle_level_irq);
mode &= ~BIT(offset);
polarity |= BIT(offset);
} else if (trigger & (IRQ_TYPE_LEVEL_HIGH)) {
irq_set_handler_locked(d, handle_level_irq);
mode &= ~BIT(offset);
polarity &= ~BIT(offset);
} else if (trigger & IRQ_TYPE_EDGE_FALLING) {
irq_set_handler_locked(d, handle_edge_irq);
mode |= BIT(offset);
polarity |= BIT(offset);
} else if (trigger & IRQ_TYPE_EDGE_RISING) {
irq_set_handler_locked(d, handle_edge_irq);
mode |= BIT(offset);
polarity &= ~BIT(offset);
} else {
irq_set_handler_locked(d, handle_bad_irq);
pr_warn("Faraday IRQ: no supported trigger selected for line %d\n",
offset);
}
writel(mode, FT010_IRQ_MODE(f->base));
writel(polarity, FT010_IRQ_POLARITY(f->base));
return 0;
}
static struct irq_chip ft010_irq_chip = {
.name = "FTINTC010",
.irq_ack = ft010_irq_ack,
.irq_mask = ft010_irq_mask,
.irq_unmask = ft010_irq_unmask,
.irq_set_type = ft010_irq_set_type,
};
/* Local static for the IRQ entry call */
static struct ft010_irq_data firq;
asmlinkage void __exception_irq_entry ft010_irqchip_handle_irq(struct pt_regs *regs)
{
struct ft010_irq_data *f = &firq;
int irq;
u32 status;
while ((status = readl(FT010_IRQ_STATUS(f->base)))) {
irq = ffs(status) - 1;
handle_domain_irq(f->domain, irq, regs);
}
}
static int ft010_irqdomain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct ft010_irq_data *f = d->host_data;
irq_set_chip_data(irq, f);
/* All IRQs should set up their type, flags as bad by default */
irq_set_chip_and_handler(irq, &ft010_irq_chip, handle_bad_irq);
irq_set_probe(irq);
return 0;
}
static void ft010_irqdomain_unmap(struct irq_domain *d, unsigned int irq)
{
irq_set_chip_and_handler(irq, NULL, NULL);
irq_set_chip_data(irq, NULL);
}
static const struct irq_domain_ops ft010_irqdomain_ops = {
.map = ft010_irqdomain_map,
.unmap = ft010_irqdomain_unmap,
.xlate = irq_domain_xlate_onetwocell,
};
int __init ft010_of_init_irq(struct device_node *node,
struct device_node *parent)
{
struct ft010_irq_data *f = &firq;
/*
* Disable the idle handler by default since it is buggy
* For more info see arch/arm/mach-gemini/idle.c
*/
cpu_idle_poll_ctrl(true);
f->base = of_iomap(node, 0);
WARN(!f->base, "unable to map gemini irq registers\n");
/* Disable all interrupts */
writel(0, FT010_IRQ_MASK(f->base));
writel(0, FT010_FIQ_MASK(f->base));
f->domain = irq_domain_add_simple(node, FT010_NUM_IRQS, 0,
&ft010_irqdomain_ops, f);
set_handle_irq(ft010_irqchip_handle_irq);
return 0;
}
IRQCHIP_DECLARE(faraday, "faraday,ftintc010",
ft010_of_init_irq);
IRQCHIP_DECLARE(gemini, "cortina,gemini-interrupt-controller",
ft010_of_init_irq);
IRQCHIP_DECLARE(moxa, "moxa,moxart-ic",
ft010_of_init_irq);