linux/drivers/clk/meson/sclk-div.c
Martin Blumenstingl 9ac323943f clk: meson: sclk-div: switch from .round_rate to .determine_rate
clk_ops.round_rate will be removed at some point. It's replacement is
.determine_rate. Switch sclk-div over to use .determine_rate.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20221225212632.2760126-4-martin.blumenstingl@googlemail.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-01-13 15:14:12 +01:00

255 lines
6.0 KiB
C

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (c) 2018 BayLibre, SAS.
* Author: Jerome Brunet <jbrunet@baylibre.com>
*
* Sample clock generator divider:
* This HW divider gates with value 0 but is otherwise a zero based divider:
*
* val >= 1
* divider = val + 1
*
* The duty cycle may also be set for the LR clock variant. The duty cycle
* ratio is:
*
* hi = [0 - val]
* duty_cycle = (1 + hi) / (1 + val)
*/
#include <linux/clk-provider.h>
#include <linux/module.h>
#include "clk-regmap.h"
#include "sclk-div.h"
static inline struct meson_sclk_div_data *
meson_sclk_div_data(struct clk_regmap *clk)
{
return (struct meson_sclk_div_data *)clk->data;
}
static int sclk_div_maxval(struct meson_sclk_div_data *sclk)
{
return (1 << sclk->div.width) - 1;
}
static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk)
{
return sclk_div_maxval(sclk) + 1;
}
static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate,
unsigned long prate, int maxdiv)
{
int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate);
return clamp(div, 2, maxdiv);
}
static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
unsigned long *prate,
struct meson_sclk_div_data *sclk)
{
struct clk_hw *parent = clk_hw_get_parent(hw);
int bestdiv = 0, i;
unsigned long maxdiv, now, parent_now;
unsigned long best = 0, best_parent = 0;
if (!rate)
rate = 1;
maxdiv = sclk_div_maxdiv(sclk);
if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT))
return sclk_div_getdiv(hw, rate, *prate, maxdiv);
/*
* The maximum divider we can use without overflowing
* unsigned long in rate * i below
*/
maxdiv = min(ULONG_MAX / rate, maxdiv);
for (i = 2; i <= maxdiv; i++) {
/*
* It's the most ideal case if the requested rate can be
* divided from parent clock without needing to change
* parent rate, so return the divider immediately.
*/
if (rate * i == *prate)
return i;
parent_now = clk_hw_round_rate(parent, rate * i);
now = DIV_ROUND_UP_ULL((u64)parent_now, i);
if (abs(rate - now) < abs(rate - best)) {
bestdiv = i;
best = now;
best_parent = parent_now;
}
}
if (!bestdiv)
bestdiv = sclk_div_maxdiv(sclk);
else
*prate = best_parent;
return bestdiv;
}
static int sclk_div_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
int div;
div = sclk_div_bestdiv(hw, req->rate, &req->best_parent_rate, sclk);
req->rate = DIV_ROUND_UP_ULL((u64)req->best_parent_rate, div);
return 0;
}
static void sclk_apply_ratio(struct clk_regmap *clk,
struct meson_sclk_div_data *sclk)
{
unsigned int hi = DIV_ROUND_CLOSEST(sclk->cached_div *
sclk->cached_duty.num,
sclk->cached_duty.den);
if (hi)
hi -= 1;
meson_parm_write(clk->map, &sclk->hi, hi);
}
static int sclk_div_set_duty_cycle(struct clk_hw *hw,
struct clk_duty *duty)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
if (MESON_PARM_APPLICABLE(&sclk->hi)) {
memcpy(&sclk->cached_duty, duty, sizeof(*duty));
sclk_apply_ratio(clk, sclk);
}
return 0;
}
static int sclk_div_get_duty_cycle(struct clk_hw *hw,
struct clk_duty *duty)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
int hi;
if (!MESON_PARM_APPLICABLE(&sclk->hi)) {
duty->num = 1;
duty->den = 2;
return 0;
}
hi = meson_parm_read(clk->map, &sclk->hi);
duty->num = hi + 1;
duty->den = sclk->cached_div;
return 0;
}
static void sclk_apply_divider(struct clk_regmap *clk,
struct meson_sclk_div_data *sclk)
{
if (MESON_PARM_APPLICABLE(&sclk->hi))
sclk_apply_ratio(clk, sclk);
meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1);
}
static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long prate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
unsigned long maxdiv = sclk_div_maxdiv(sclk);
sclk->cached_div = sclk_div_getdiv(hw, rate, prate, maxdiv);
if (clk_hw_is_enabled(hw))
sclk_apply_divider(clk, sclk);
return 0;
}
static unsigned long sclk_div_recalc_rate(struct clk_hw *hw,
unsigned long prate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
return DIV_ROUND_UP_ULL((u64)prate, sclk->cached_div);
}
static int sclk_div_enable(struct clk_hw *hw)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
sclk_apply_divider(clk, sclk);
return 0;
}
static void sclk_div_disable(struct clk_hw *hw)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
meson_parm_write(clk->map, &sclk->div, 0);
}
static int sclk_div_is_enabled(struct clk_hw *hw)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
if (meson_parm_read(clk->map, &sclk->div))
return 1;
return 0;
}
static int sclk_div_init(struct clk_hw *hw)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
unsigned int val;
val = meson_parm_read(clk->map, &sclk->div);
/* if the divider is initially disabled, assume max */
if (!val)
sclk->cached_div = sclk_div_maxdiv(sclk);
else
sclk->cached_div = val + 1;
sclk_div_get_duty_cycle(hw, &sclk->cached_duty);
return 0;
}
const struct clk_ops meson_sclk_div_ops = {
.recalc_rate = sclk_div_recalc_rate,
.determine_rate = sclk_div_determine_rate,
.set_rate = sclk_div_set_rate,
.enable = sclk_div_enable,
.disable = sclk_div_disable,
.is_enabled = sclk_div_is_enabled,
.get_duty_cycle = sclk_div_get_duty_cycle,
.set_duty_cycle = sclk_div_set_duty_cycle,
.init = sclk_div_init,
};
EXPORT_SYMBOL_GPL(meson_sclk_div_ops);
MODULE_DESCRIPTION("Amlogic Sample divider driver");
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
MODULE_LICENSE("GPL v2");