linux/drivers/pci/pcie/edr.c
Kuppuswamy Sathyanarayanan ac1c8e35a3 PCI/DPC: Add Error Disconnect Recover (EDR) support
Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to
notify OSPM that a device has been disconnected due to an error condition
(ACPI v6.3, sec 5.6.6).  OSPM advertises its support for EDR on PCI devices
via _OSC (see [1], sec 4.5.1, table 4-4).  The OSPM EDR notify handler
should invalidate software state associated with disconnected devices and
may attempt to recover them.  OSPM communicates the status of recovery to
the firmware via _OST (sec 6.3.5.2).

For PCIe, firmware may use Downstream Port Containment (DPC) to support
EDR.  Per [1], sec 4.5.1, table 4-6, even if firmware has retained control
of DPC, OSPM may read/write DPC control and status registers during the EDR
notification processing window, i.e., from the time it receives an EDR
notification until it clears the DPC Trigger Status.

Note that per [1], sec 4.5.1 and 4.5.2.4,

  1. If the OS supports EDR, it should advertise that to firmware by
     setting OSC_PCI_EDR_SUPPORT in _OSC Support.

  2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request
     control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in
     _OSC Support.

Add an EDR notify handler to attempt recovery.

[1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
    affecting PCI Firmware Specification, Rev. 3.2
    https://members.pcisig.com/wg/PCI-SIG/document/12888

[bhelgaas: squash add/enable patches into one]
Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
2020-03-28 13:19:04 -05:00

240 lines
6.0 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* PCI Error Disconnect Recover support
* Author: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
*
* Copyright (C) 2020 Intel Corp.
*/
#define dev_fmt(fmt) "EDR: " fmt
#include <linux/pci.h>
#include <linux/pci-acpi.h>
#include "portdrv.h"
#include "../pci.h"
#define EDR_PORT_DPC_ENABLE_DSM 0x0C
#define EDR_PORT_LOCATE_DSM 0x0D
#define EDR_OST_SUCCESS 0x80
#define EDR_OST_FAILED 0x81
/*
* _DSM wrapper function to enable/disable DPC
* @pdev : PCI device structure
*
* returns 0 on success or errno on failure.
*/
static int acpi_enable_dpc(struct pci_dev *pdev)
{
struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
union acpi_object *obj, argv4, req;
int status = 0;
/*
* Behavior when calling unsupported _DSM functions is undefined,
* so check whether EDR_PORT_DPC_ENABLE_DSM is supported.
*/
if (!acpi_check_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
1ULL << EDR_PORT_DPC_ENABLE_DSM))
return 0;
req.type = ACPI_TYPE_INTEGER;
req.integer.value = 1;
argv4.type = ACPI_TYPE_PACKAGE;
argv4.package.count = 1;
argv4.package.elements = &req;
/*
* Per Downstream Port Containment Related Enhancements ECN to PCI
* Firmware Specification r3.2, sec 4.6.12, EDR_PORT_DPC_ENABLE_DSM is
* optional. Return success if it's not implemented.
*/
obj = acpi_evaluate_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
EDR_PORT_DPC_ENABLE_DSM, &argv4);
if (!obj)
return 0;
if (obj->type != ACPI_TYPE_INTEGER) {
pci_err(pdev, FW_BUG "Enable DPC _DSM returned non integer\n");
status = -EIO;
}
if (obj->integer.value != 1) {
pci_err(pdev, "Enable DPC _DSM failed to enable DPC\n");
status = -EIO;
}
ACPI_FREE(obj);
return status;
}
/*
* _DSM wrapper function to locate DPC port
* @pdev : Device which received EDR event
*
* Returns pci_dev or NULL. Caller is responsible for dropping a reference
* on the returned pci_dev with pci_dev_put().
*/
static struct pci_dev *acpi_dpc_port_get(struct pci_dev *pdev)
{
struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
union acpi_object *obj;
u16 port;
/*
* Behavior when calling unsupported _DSM functions is undefined,
* so check whether EDR_PORT_DPC_ENABLE_DSM is supported.
*/
if (!acpi_check_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
1ULL << EDR_PORT_LOCATE_DSM))
return pci_dev_get(pdev);
obj = acpi_evaluate_dsm(adev->handle, &pci_acpi_dsm_guid, 5,
EDR_PORT_LOCATE_DSM, NULL);
if (!obj)
return pci_dev_get(pdev);
if (obj->type != ACPI_TYPE_INTEGER) {
ACPI_FREE(obj);
pci_err(pdev, FW_BUG "Locate Port _DSM returned non integer\n");
return NULL;
}
/*
* Firmware returns DPC port BDF details in following format:
* 15:8 = bus
* 7:3 = device
* 2:0 = function
*/
port = obj->integer.value;
ACPI_FREE(obj);
return pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
PCI_BUS_NUM(port), port & 0xff);
}
/*
* _OST wrapper function to let firmware know the status of EDR event
* @pdev : Device used to send _OST
* @edev : Device which experienced EDR event
* @status : Status of EDR event
*/
static int acpi_send_edr_status(struct pci_dev *pdev, struct pci_dev *edev,
u16 status)
{
struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
u32 ost_status;
pci_dbg(pdev, "Status for %s: %#x\n", pci_name(edev), status);
ost_status = PCI_DEVID(edev->bus->number, edev->devfn) << 16;
ost_status |= status;
status = acpi_evaluate_ost(adev->handle, ACPI_NOTIFY_DISCONNECT_RECOVER,
ost_status, NULL);
if (ACPI_FAILURE(status))
return -EINVAL;
return 0;
}
static void edr_handle_event(acpi_handle handle, u32 event, void *data)
{
struct pci_dev *pdev = data, *edev;
pci_ers_result_t estate = PCI_ERS_RESULT_DISCONNECT;
u16 status;
pci_info(pdev, "ACPI event %#x received\n", event);
if (event != ACPI_NOTIFY_DISCONNECT_RECOVER)
return;
/* Locate the port which issued EDR event */
edev = acpi_dpc_port_get(pdev);
if (!edev) {
pci_err(pdev, "Firmware failed to locate DPC port\n");
return;
}
pci_dbg(pdev, "Reported EDR dev: %s\n", pci_name(edev));
/* If port does not support DPC, just send the OST */
if (!edev->dpc_cap) {
pci_err(edev, FW_BUG "This device doesn't support DPC\n");
goto send_ost;
}
/* Check if there is a valid DPC trigger */
pci_read_config_word(edev, edev->dpc_cap + PCI_EXP_DPC_STATUS, &status);
if (!(status & PCI_EXP_DPC_STATUS_TRIGGER)) {
pci_err(edev, "Invalid DPC trigger %#010x\n", status);
goto send_ost;
}
dpc_process_error(edev);
pci_aer_raw_clear_status(edev);
/*
* Irrespective of whether the DPC event is triggered by ERR_FATAL
* or ERR_NONFATAL, since the link is already down, use the FATAL
* error recovery path for both cases.
*/
estate = pcie_do_recovery(edev, pci_channel_io_frozen, dpc_reset_link);
send_ost:
/*
* If recovery is successful, send _OST(0xF, BDF << 16 | 0x80)
* to firmware. If not successful, send _OST(0xF, BDF << 16 | 0x81).
*/
if (estate == PCI_ERS_RESULT_RECOVERED) {
pci_dbg(edev, "DPC port successfully recovered\n");
acpi_send_edr_status(pdev, edev, EDR_OST_SUCCESS);
} else {
pci_dbg(edev, "DPC port recovery failed\n");
acpi_send_edr_status(pdev, edev, EDR_OST_FAILED);
}
pci_dev_put(edev);
}
void pci_acpi_add_edr_notifier(struct pci_dev *pdev)
{
struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
acpi_status status;
if (!adev) {
pci_dbg(pdev, "No valid ACPI node, skipping EDR init\n");
return;
}
status = acpi_install_notify_handler(adev->handle, ACPI_SYSTEM_NOTIFY,
edr_handle_event, pdev);
if (ACPI_FAILURE(status)) {
pci_err(pdev, "Failed to install notify handler\n");
return;
}
if (acpi_enable_dpc(pdev))
acpi_remove_notify_handler(adev->handle, ACPI_SYSTEM_NOTIFY,
edr_handle_event);
else
pci_dbg(pdev, "Notify handler installed\n");
}
void pci_acpi_remove_edr_notifier(struct pci_dev *pdev)
{
struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
if (!adev)
return;
acpi_remove_notify_handler(adev->handle, ACPI_SYSTEM_NOTIFY,
edr_handle_event);
pci_dbg(pdev, "Notify handler removed\n");
}