Al Cooper fc430aea02 phy: usb: PHY's MDIO registers not accessible without device installed ... When there is no device connected and FSM is enabled, the XHCI puts the PHY into suspend mode. When the PHY is put into suspend mode the USB LDO powers down the PHY. This causes the MDIO to be inaccessible and its registers reset to default. The fix is to disable FSM. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>		2020-01-08 12:58:06 +05:30
..
Kconfig	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
Makefile	phy: usb: Add support for new Synopsys USB controller on the 7216	2020-01-08 12:58:06 +05:30
phy-bcm-cygnus-pcie.c	phy: Convert to using %pOFn instead of device_node.name	2018-09-25 16:10:07 +05:30
phy-bcm-kona-usb2.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
phy-bcm-ns2-pcie.c
phy-bcm-ns2-usbdrd.c	extcon: Split out extcon header file for consumer and provider device	2017-10-23 14:07:58 +09:00
phy-bcm-ns-usb2.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
phy-bcm-ns-usb3.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
phy-bcm-sr-pcie.c	phy: bcm-sr-pcie: Change operation when PIPEMUX=1	2019-02-07 11:11:06 +05:30
phy-bcm-sr-usb.c	phy: sr-usb: Add Stingray USB PHY driver	2019-04-17 14:12:48 +05:30
phy-brcm-sata.c	phy: brcm-sata: Implement 7216 initialization sequence	2020-01-08 12:58:06 +05:30
phy-brcm-usb-init-synopsys.c	phy: usb: PHY's MDIO registers not accessible without device installed	2020-01-08 12:58:06 +05:30
phy-brcm-usb-init.c	phy: usb: Add support for new Synopsys USB controller on the 7211b0	2020-01-08 12:58:06 +05:30
phy-brcm-usb-init.h	phy: usb: Add support for new Synopsys USB controller on the 7211b0	2020-01-08 12:58:06 +05:30
phy-brcm-usb.c	phy: usb: fix driver to defer on clk_get defer	2020-01-08 12:58:06 +05:30