mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 00:52:01 +00:00
e09bceac75
Fixed the following checkpatch warning. WARNING: else is not generally useful after a break or return Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
813 lines
15 KiB
C
813 lines
15 KiB
C
/*
|
|
* ld9040 AMOLED LCD panel driver.
|
|
*
|
|
* Copyright (c) 2011 Samsung Electronics
|
|
* Author: Donghwa Lee <dh09.lee@samsung.com>
|
|
* Derived from drivers/video/backlight/s6e63m0.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/backlight.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/lcd.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/wait.h>
|
|
|
|
#include "ld9040_gamma.h"
|
|
|
|
#define SLEEPMSEC 0x1000
|
|
#define ENDDEF 0x2000
|
|
#define DEFMASK 0xFF00
|
|
#define COMMAND_ONLY 0xFE
|
|
#define DATA_ONLY 0xFF
|
|
|
|
#define MIN_BRIGHTNESS 0
|
|
#define MAX_BRIGHTNESS 24
|
|
|
|
struct ld9040 {
|
|
struct device *dev;
|
|
struct spi_device *spi;
|
|
unsigned int power;
|
|
unsigned int current_brightness;
|
|
|
|
struct lcd_device *ld;
|
|
struct backlight_device *bd;
|
|
struct lcd_platform_data *lcd_pd;
|
|
|
|
struct mutex lock;
|
|
bool enabled;
|
|
};
|
|
|
|
static struct regulator_bulk_data supplies[] = {
|
|
{ .supply = "vdd3", },
|
|
{ .supply = "vci", },
|
|
};
|
|
|
|
static void ld9040_regulator_enable(struct ld9040 *lcd)
|
|
{
|
|
int ret = 0;
|
|
struct lcd_platform_data *pd = NULL;
|
|
|
|
pd = lcd->lcd_pd;
|
|
mutex_lock(&lcd->lock);
|
|
if (!lcd->enabled) {
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
|
|
if (ret)
|
|
goto out;
|
|
|
|
lcd->enabled = true;
|
|
}
|
|
msleep(pd->power_on_delay);
|
|
out:
|
|
mutex_unlock(&lcd->lock);
|
|
}
|
|
|
|
static void ld9040_regulator_disable(struct ld9040 *lcd)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&lcd->lock);
|
|
if (lcd->enabled) {
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
|
|
if (ret)
|
|
goto out;
|
|
|
|
lcd->enabled = false;
|
|
}
|
|
out:
|
|
mutex_unlock(&lcd->lock);
|
|
}
|
|
|
|
static const unsigned short seq_swreset[] = {
|
|
0x01, COMMAND_ONLY,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_user_setting[] = {
|
|
0xF0, 0x5A,
|
|
|
|
DATA_ONLY, 0x5A,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_elvss_on[] = {
|
|
0xB1, 0x0D,
|
|
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x16,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_gtcon[] = {
|
|
0xF7, 0x09,
|
|
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_panel_condition[] = {
|
|
0xF8, 0x05,
|
|
|
|
DATA_ONLY, 0x65,
|
|
DATA_ONLY, 0x96,
|
|
DATA_ONLY, 0x71,
|
|
DATA_ONLY, 0x7D,
|
|
DATA_ONLY, 0x19,
|
|
DATA_ONLY, 0x3B,
|
|
DATA_ONLY, 0x0D,
|
|
DATA_ONLY, 0x19,
|
|
DATA_ONLY, 0x7E,
|
|
DATA_ONLY, 0x0D,
|
|
DATA_ONLY, 0xE2,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x7E,
|
|
DATA_ONLY, 0x7D,
|
|
DATA_ONLY, 0x07,
|
|
DATA_ONLY, 0x07,
|
|
DATA_ONLY, 0x20,
|
|
DATA_ONLY, 0x20,
|
|
DATA_ONLY, 0x20,
|
|
DATA_ONLY, 0x02,
|
|
DATA_ONLY, 0x02,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_gamma_set1[] = {
|
|
0xF9, 0x00,
|
|
|
|
DATA_ONLY, 0xA7,
|
|
DATA_ONLY, 0xB4,
|
|
DATA_ONLY, 0xAE,
|
|
DATA_ONLY, 0xBF,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x91,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0xB2,
|
|
DATA_ONLY, 0xB4,
|
|
DATA_ONLY, 0xAA,
|
|
DATA_ONLY, 0xBB,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0xAC,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0xB3,
|
|
DATA_ONLY, 0xB1,
|
|
DATA_ONLY, 0xAA,
|
|
DATA_ONLY, 0xBC,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0xB3,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_gamma_ctrl[] = {
|
|
0xFB, 0x02,
|
|
|
|
DATA_ONLY, 0x5A,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_gamma_start[] = {
|
|
0xF9, COMMAND_ONLY,
|
|
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_apon[] = {
|
|
0xF3, 0x00,
|
|
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x0A,
|
|
DATA_ONLY, 0x02,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_display_ctrl[] = {
|
|
0xF2, 0x02,
|
|
|
|
DATA_ONLY, 0x08,
|
|
DATA_ONLY, 0x08,
|
|
DATA_ONLY, 0x10,
|
|
DATA_ONLY, 0x10,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_manual_pwr[] = {
|
|
0xB0, 0x04,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_pwr_ctrl[] = {
|
|
0xF4, 0x0A,
|
|
|
|
DATA_ONLY, 0x87,
|
|
DATA_ONLY, 0x25,
|
|
DATA_ONLY, 0x6A,
|
|
DATA_ONLY, 0x44,
|
|
DATA_ONLY, 0x02,
|
|
DATA_ONLY, 0x88,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_sleep_out[] = {
|
|
0x11, COMMAND_ONLY,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_sleep_in[] = {
|
|
0x10, COMMAND_ONLY,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_display_on[] = {
|
|
0x29, COMMAND_ONLY,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_display_off[] = {
|
|
0x28, COMMAND_ONLY,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vci1_1st_en[] = {
|
|
0xF3, 0x10,
|
|
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x02,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vl1_en[] = {
|
|
0xF3, 0x11,
|
|
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x02,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vl2_en[] = {
|
|
0xF3, 0x13,
|
|
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x02,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vci1_2nd_en[] = {
|
|
0xF3, 0x33,
|
|
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x02,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vl3_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x02,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vreg1_amp_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0x01,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x02,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vgh_amp_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0x11,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x02,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vgl_amp_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0x31,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x02,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vmos_amp_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0xB1,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vint_amp_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0xF1,
|
|
/* DATA_ONLY, 0x71, VMOS/VBL/VBH not used */
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
/* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vbh_amp_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0xF9,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_vbl_amp_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0xFD,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_gam_amp_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0xFF,
|
|
/* DATA_ONLY, 0x73, VMOS/VBL/VBH not used */
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
/* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_sd_amp_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0xFF,
|
|
/* DATA_ONLY, 0x73, VMOS/VBL/VBH not used */
|
|
DATA_ONLY, 0x80,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
/* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_gls_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0xFF,
|
|
/* DATA_ONLY, 0x73, VMOS/VBL/VBH not used */
|
|
DATA_ONLY, 0x81,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
/* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_els_en[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0xFF,
|
|
/* DATA_ONLY, 0x73, VMOS/VBL/VBH not used */
|
|
DATA_ONLY, 0x83,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
/* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static const unsigned short seq_el_on[] = {
|
|
0xF3, 0x37,
|
|
|
|
DATA_ONLY, 0xFF,
|
|
/* DATA_ONLY, 0x73, VMOS/VBL/VBH not used */
|
|
DATA_ONLY, 0x87,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
/* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */
|
|
ENDDEF, 0x00
|
|
};
|
|
|
|
static int ld9040_spi_write_byte(struct ld9040 *lcd, int addr, int data)
|
|
{
|
|
u16 buf[1];
|
|
struct spi_message msg;
|
|
|
|
struct spi_transfer xfer = {
|
|
.len = 2,
|
|
.tx_buf = buf,
|
|
};
|
|
|
|
buf[0] = (addr << 8) | data;
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
return spi_sync(lcd->spi, &msg);
|
|
}
|
|
|
|
static int ld9040_spi_write(struct ld9040 *lcd, unsigned char address,
|
|
unsigned char command)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (address != DATA_ONLY)
|
|
ret = ld9040_spi_write_byte(lcd, 0x0, address);
|
|
if (command != COMMAND_ONLY)
|
|
ret = ld9040_spi_write_byte(lcd, 0x1, command);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ld9040_panel_send_sequence(struct ld9040 *lcd,
|
|
const unsigned short *wbuf)
|
|
{
|
|
int ret = 0, i = 0;
|
|
|
|
while ((wbuf[i] & DEFMASK) != ENDDEF) {
|
|
if ((wbuf[i] & DEFMASK) != SLEEPMSEC) {
|
|
ret = ld9040_spi_write(lcd, wbuf[i], wbuf[i+1]);
|
|
if (ret)
|
|
break;
|
|
} else {
|
|
msleep(wbuf[i+1]);
|
|
}
|
|
i += 2;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int _ld9040_gamma_ctl(struct ld9040 *lcd, const unsigned int *gamma)
|
|
{
|
|
unsigned int i = 0;
|
|
int ret = 0;
|
|
|
|
/* start gamma table updating. */
|
|
ret = ld9040_panel_send_sequence(lcd, seq_gamma_start);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "failed to disable gamma table updating.\n");
|
|
goto gamma_err;
|
|
}
|
|
|
|
for (i = 0 ; i < GAMMA_TABLE_COUNT; i++) {
|
|
ret = ld9040_spi_write(lcd, DATA_ONLY, gamma[i]);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "failed to set gamma table.\n");
|
|
goto gamma_err;
|
|
}
|
|
}
|
|
|
|
/* update gamma table. */
|
|
ret = ld9040_panel_send_sequence(lcd, seq_gamma_ctrl);
|
|
if (ret)
|
|
dev_err(lcd->dev, "failed to update gamma table.\n");
|
|
|
|
gamma_err:
|
|
return ret;
|
|
}
|
|
|
|
static int ld9040_gamma_ctl(struct ld9040 *lcd, int gamma)
|
|
{
|
|
return _ld9040_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]);
|
|
}
|
|
|
|
static int ld9040_ldi_init(struct ld9040 *lcd)
|
|
{
|
|
int ret, i;
|
|
static const unsigned short *init_seq[] = {
|
|
seq_user_setting,
|
|
seq_panel_condition,
|
|
seq_display_ctrl,
|
|
seq_manual_pwr,
|
|
seq_elvss_on,
|
|
seq_gtcon,
|
|
seq_gamma_set1,
|
|
seq_gamma_ctrl,
|
|
seq_sleep_out,
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
|
|
ret = ld9040_panel_send_sequence(lcd, init_seq[i]);
|
|
/* workaround: minimum delay time for transferring CMD */
|
|
usleep_range(300, 310);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ld9040_ldi_enable(struct ld9040 *lcd)
|
|
{
|
|
return ld9040_panel_send_sequence(lcd, seq_display_on);
|
|
}
|
|
|
|
static int ld9040_ldi_disable(struct ld9040 *lcd)
|
|
{
|
|
int ret;
|
|
|
|
ret = ld9040_panel_send_sequence(lcd, seq_display_off);
|
|
ret = ld9040_panel_send_sequence(lcd, seq_sleep_in);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ld9040_power_is_on(int power)
|
|
{
|
|
return power <= FB_BLANK_NORMAL;
|
|
}
|
|
|
|
static int ld9040_power_on(struct ld9040 *lcd)
|
|
{
|
|
int ret = 0;
|
|
struct lcd_platform_data *pd;
|
|
|
|
pd = lcd->lcd_pd;
|
|
|
|
/* lcd power on */
|
|
ld9040_regulator_enable(lcd);
|
|
|
|
if (!pd->reset) {
|
|
dev_err(lcd->dev, "reset is NULL.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pd->reset(lcd->ld);
|
|
msleep(pd->reset_delay);
|
|
|
|
ret = ld9040_ldi_init(lcd);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "failed to initialize ldi.\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ld9040_ldi_enable(lcd);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "failed to enable ldi.\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ld9040_power_off(struct ld9040 *lcd)
|
|
{
|
|
int ret;
|
|
struct lcd_platform_data *pd;
|
|
|
|
pd = lcd->lcd_pd;
|
|
|
|
ret = ld9040_ldi_disable(lcd);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "lcd setting failed.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
msleep(pd->power_off_delay);
|
|
|
|
/* lcd power off */
|
|
ld9040_regulator_disable(lcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ld9040_power(struct ld9040 *lcd, int power)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (ld9040_power_is_on(power) && !ld9040_power_is_on(lcd->power))
|
|
ret = ld9040_power_on(lcd);
|
|
else if (!ld9040_power_is_on(power) && ld9040_power_is_on(lcd->power))
|
|
ret = ld9040_power_off(lcd);
|
|
|
|
if (!ret)
|
|
lcd->power = power;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ld9040_set_power(struct lcd_device *ld, int power)
|
|
{
|
|
struct ld9040 *lcd = lcd_get_data(ld);
|
|
|
|
if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
|
|
power != FB_BLANK_NORMAL) {
|
|
dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ld9040_power(lcd, power);
|
|
}
|
|
|
|
static int ld9040_get_power(struct lcd_device *ld)
|
|
{
|
|
struct ld9040 *lcd = lcd_get_data(ld);
|
|
|
|
return lcd->power;
|
|
}
|
|
|
|
static int ld9040_set_brightness(struct backlight_device *bd)
|
|
{
|
|
int ret = 0, brightness = bd->props.brightness;
|
|
struct ld9040 *lcd = bl_get_data(bd);
|
|
|
|
if (brightness < MIN_BRIGHTNESS ||
|
|
brightness > bd->props.max_brightness) {
|
|
dev_err(&bd->dev, "lcd brightness should be %d to %d.\n",
|
|
MIN_BRIGHTNESS, MAX_BRIGHTNESS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = ld9040_gamma_ctl(lcd, bd->props.brightness);
|
|
if (ret) {
|
|
dev_err(&bd->dev, "lcd brightness setting failed.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct lcd_ops ld9040_lcd_ops = {
|
|
.set_power = ld9040_set_power,
|
|
.get_power = ld9040_get_power,
|
|
};
|
|
|
|
static const struct backlight_ops ld9040_backlight_ops = {
|
|
.update_status = ld9040_set_brightness,
|
|
};
|
|
|
|
static int ld9040_probe(struct spi_device *spi)
|
|
{
|
|
int ret = 0;
|
|
struct ld9040 *lcd = NULL;
|
|
struct lcd_device *ld = NULL;
|
|
struct backlight_device *bd = NULL;
|
|
struct backlight_properties props;
|
|
|
|
lcd = devm_kzalloc(&spi->dev, sizeof(struct ld9040), GFP_KERNEL);
|
|
if (!lcd)
|
|
return -ENOMEM;
|
|
|
|
/* ld9040 lcd panel uses 3-wire 9bits SPI Mode. */
|
|
spi->bits_per_word = 9;
|
|
|
|
ret = spi_setup(spi);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "spi setup failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
lcd->spi = spi;
|
|
lcd->dev = &spi->dev;
|
|
|
|
lcd->lcd_pd = dev_get_platdata(&spi->dev);
|
|
if (!lcd->lcd_pd) {
|
|
dev_err(&spi->dev, "platform data is NULL.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_init(&lcd->lock);
|
|
|
|
ret = devm_regulator_bulk_get(lcd->dev, ARRAY_SIZE(supplies), supplies);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "Failed to get regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ld = devm_lcd_device_register(&spi->dev, "ld9040", &spi->dev, lcd,
|
|
&ld9040_lcd_ops);
|
|
if (IS_ERR(ld))
|
|
return PTR_ERR(ld);
|
|
|
|
lcd->ld = ld;
|
|
|
|
memset(&props, 0, sizeof(struct backlight_properties));
|
|
props.type = BACKLIGHT_RAW;
|
|
props.max_brightness = MAX_BRIGHTNESS;
|
|
|
|
bd = devm_backlight_device_register(&spi->dev, "ld9040-bl", &spi->dev,
|
|
lcd, &ld9040_backlight_ops, &props);
|
|
if (IS_ERR(bd))
|
|
return PTR_ERR(bd);
|
|
|
|
bd->props.brightness = MAX_BRIGHTNESS;
|
|
lcd->bd = bd;
|
|
|
|
/*
|
|
* if lcd panel was on from bootloader like u-boot then
|
|
* do not lcd on.
|
|
*/
|
|
if (!lcd->lcd_pd->lcd_enabled) {
|
|
/*
|
|
* if lcd panel was off from bootloader then
|
|
* current lcd status is powerdown and then
|
|
* it enables lcd panel.
|
|
*/
|
|
lcd->power = FB_BLANK_POWERDOWN;
|
|
|
|
ld9040_power(lcd, FB_BLANK_UNBLANK);
|
|
} else {
|
|
lcd->power = FB_BLANK_UNBLANK;
|
|
}
|
|
|
|
spi_set_drvdata(spi, lcd);
|
|
|
|
dev_info(&spi->dev, "ld9040 panel driver has been probed.\n");
|
|
return 0;
|
|
}
|
|
|
|
static int ld9040_remove(struct spi_device *spi)
|
|
{
|
|
struct ld9040 *lcd = spi_get_drvdata(spi);
|
|
|
|
ld9040_power(lcd, FB_BLANK_POWERDOWN);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int ld9040_suspend(struct device *dev)
|
|
{
|
|
struct ld9040 *lcd = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "lcd->power = %d\n", lcd->power);
|
|
|
|
/*
|
|
* when lcd panel is suspend, lcd panel becomes off
|
|
* regardless of status.
|
|
*/
|
|
return ld9040_power(lcd, FB_BLANK_POWERDOWN);
|
|
}
|
|
|
|
static int ld9040_resume(struct device *dev)
|
|
{
|
|
struct ld9040 *lcd = dev_get_drvdata(dev);
|
|
|
|
lcd->power = FB_BLANK_POWERDOWN;
|
|
|
|
return ld9040_power(lcd, FB_BLANK_UNBLANK);
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(ld9040_pm_ops, ld9040_suspend, ld9040_resume);
|
|
|
|
/* Power down all displays on reboot, poweroff or halt. */
|
|
static void ld9040_shutdown(struct spi_device *spi)
|
|
{
|
|
struct ld9040 *lcd = spi_get_drvdata(spi);
|
|
|
|
ld9040_power(lcd, FB_BLANK_POWERDOWN);
|
|
}
|
|
|
|
static struct spi_driver ld9040_driver = {
|
|
.driver = {
|
|
.name = "ld9040",
|
|
.owner = THIS_MODULE,
|
|
.pm = &ld9040_pm_ops,
|
|
},
|
|
.probe = ld9040_probe,
|
|
.remove = ld9040_remove,
|
|
.shutdown = ld9040_shutdown,
|
|
};
|
|
|
|
module_spi_driver(ld9040_driver);
|
|
|
|
MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
|
|
MODULE_DESCRIPTION("ld9040 LCD Driver");
|
|
MODULE_LICENSE("GPL");
|