mirror of
https://github.com/torvalds/linux.git
synced 2024-11-17 17:41:44 +00:00
8190471087
The GT-64111 PCI host bridge has no address translation mechanism, so it can't generate legacy port accesses. This quirk fixes legacy device port resources to contain the bus addresses actually generated by the GT-64111. I think this is the approach Ben Herrenschmidt suggested long ago: http://marc.info/?l=linux-kernel&m=119733290624544&w=2 This allows us to remove the IORESOURCE_PCI_FIXED hack from pcibios_fixup_device_resources(), which converts bus addresses to CPU addresses. IORESOURCE_PCI_FIXED denotes resources that can't be moved; it has nothing to do with converting bus to CPU addresses. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yoichi Yuasa <yuasa@linux-mips.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-mips@linux-mips.org Tested-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/998/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
365 lines
9.1 KiB
C
365 lines
9.1 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org)
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
|
|
/*
|
|
* Indicate whether we respect the PCI setup left by the firmware.
|
|
*
|
|
* Make this long-lived so that we know when shutting down
|
|
* whether we probed only or not.
|
|
*/
|
|
int pci_probe_only;
|
|
|
|
#define PCI_ASSIGN_ALL_BUSSES 1
|
|
|
|
unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
|
|
|
|
/*
|
|
* The PCI controller list.
|
|
*/
|
|
|
|
static struct pci_controller *hose_head, **hose_tail = &hose_head;
|
|
|
|
unsigned long PCIBIOS_MIN_IO;
|
|
unsigned long PCIBIOS_MIN_MEM;
|
|
|
|
static int pci_initialized;
|
|
|
|
/*
|
|
* We need to avoid collisions with `mirrored' VGA ports
|
|
* and other strange ISA hardware, so we always want the
|
|
* addresses to be allocated in the 0x000-0x0ff region
|
|
* modulo 0x400.
|
|
*
|
|
* Why? Because some silly external IO cards only decode
|
|
* the low 10 bits of the IO address. The 0x00-0xff region
|
|
* is reserved for motherboard devices that decode all 16
|
|
* bits, so it's ok to allocate at, say, 0x2800-0x28ff,
|
|
* but we want to try to avoid allocating at 0x2900-0x2bff
|
|
* which might have be mirrored at 0x0100-0x03ff..
|
|
*/
|
|
resource_size_t
|
|
pcibios_align_resource(void *data, const struct resource *res,
|
|
resource_size_t size, resource_size_t align)
|
|
{
|
|
struct pci_dev *dev = data;
|
|
struct pci_controller *hose = dev->sysdata;
|
|
resource_size_t start = res->start;
|
|
|
|
if (res->flags & IORESOURCE_IO) {
|
|
/* Make sure we start at our min on all hoses */
|
|
if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
|
|
start = PCIBIOS_MIN_IO + hose->io_resource->start;
|
|
|
|
/*
|
|
* Put everything into 0x00-0xff region modulo 0x400
|
|
*/
|
|
if (start & 0x300)
|
|
start = (start + 0x3ff) & ~0x3ff;
|
|
} else if (res->flags & IORESOURCE_MEM) {
|
|
/* Make sure we start at our min on all hoses */
|
|
if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
|
|
start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
|
|
}
|
|
|
|
return start;
|
|
}
|
|
|
|
static void __devinit pcibios_scanbus(struct pci_controller *hose)
|
|
{
|
|
static int next_busno;
|
|
static int need_domain_info;
|
|
struct pci_bus *bus;
|
|
|
|
if (!hose->iommu)
|
|
PCI_DMA_BUS_IS_PHYS = 1;
|
|
|
|
if (hose->get_busno && pci_probe_only)
|
|
next_busno = (*hose->get_busno)();
|
|
|
|
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
|
|
hose->bus = bus;
|
|
|
|
need_domain_info = need_domain_info || hose->index;
|
|
hose->need_domain_info = need_domain_info;
|
|
if (bus) {
|
|
next_busno = bus->subordinate + 1;
|
|
/* Don't allow 8-bit bus number overflow inside the hose -
|
|
reserve some space for bridges. */
|
|
if (next_busno > 224) {
|
|
next_busno = 0;
|
|
need_domain_info = 1;
|
|
}
|
|
|
|
if (!pci_probe_only) {
|
|
pci_bus_size_bridges(bus);
|
|
pci_bus_assign_resources(bus);
|
|
pci_enable_bridges(bus);
|
|
}
|
|
}
|
|
}
|
|
|
|
static DEFINE_MUTEX(pci_scan_mutex);
|
|
|
|
void __devinit register_pci_controller(struct pci_controller *hose)
|
|
{
|
|
if (request_resource(&iomem_resource, hose->mem_resource) < 0)
|
|
goto out;
|
|
if (request_resource(&ioport_resource, hose->io_resource) < 0) {
|
|
release_resource(hose->mem_resource);
|
|
goto out;
|
|
}
|
|
|
|
*hose_tail = hose;
|
|
hose_tail = &hose->next;
|
|
|
|
/*
|
|
* Do not panic here but later - this might hapen before console init.
|
|
*/
|
|
if (!hose->io_map_base) {
|
|
printk(KERN_WARNING
|
|
"registering PCI controller with io_map_base unset\n");
|
|
}
|
|
|
|
/*
|
|
* Scan the bus if it is register after the PCI subsystem
|
|
* initialization.
|
|
*/
|
|
if (pci_initialized) {
|
|
mutex_lock(&pci_scan_mutex);
|
|
pcibios_scanbus(hose);
|
|
mutex_unlock(&pci_scan_mutex);
|
|
}
|
|
|
|
return;
|
|
|
|
out:
|
|
printk(KERN_WARNING
|
|
"Skipping PCI bus scan due to resource conflict\n");
|
|
}
|
|
|
|
static int __init pcibios_init(void)
|
|
{
|
|
struct pci_controller *hose;
|
|
|
|
/* Scan all of the recorded PCI controllers. */
|
|
for (hose = hose_head; hose; hose = hose->next)
|
|
pcibios_scanbus(hose);
|
|
|
|
pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
|
|
|
|
pci_initialized = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(pcibios_init);
|
|
|
|
static int pcibios_enable_resources(struct pci_dev *dev, int mask)
|
|
{
|
|
u16 cmd, old_cmd;
|
|
int idx;
|
|
struct resource *r;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
old_cmd = cmd;
|
|
for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
|
|
/* Only set up the requested stuff */
|
|
if (!(mask & (1<<idx)))
|
|
continue;
|
|
|
|
r = &dev->resource[idx];
|
|
if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
|
|
continue;
|
|
if ((idx == PCI_ROM_RESOURCE) &&
|
|
(!(r->flags & IORESOURCE_ROM_ENABLE)))
|
|
continue;
|
|
if (!r->start && r->end) {
|
|
printk(KERN_ERR "PCI: Device %s not available "
|
|
"because of resource collisions\n",
|
|
pci_name(dev));
|
|
return -EINVAL;
|
|
}
|
|
if (r->flags & IORESOURCE_IO)
|
|
cmd |= PCI_COMMAND_IO;
|
|
if (r->flags & IORESOURCE_MEM)
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
}
|
|
if (cmd != old_cmd) {
|
|
printk("PCI: Enabling device %s (%04x -> %04x)\n",
|
|
pci_name(dev), old_cmd, cmd);
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If we set up a device for bus mastering, we need to check the latency
|
|
* timer as certain crappy BIOSes forget to set it properly.
|
|
*/
|
|
static unsigned int pcibios_max_latency = 255;
|
|
|
|
void pcibios_set_master(struct pci_dev *dev)
|
|
{
|
|
u8 lat;
|
|
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
|
|
if (lat < 16)
|
|
lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
|
|
else if (lat > pcibios_max_latency)
|
|
lat = pcibios_max_latency;
|
|
else
|
|
return;
|
|
printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
|
|
pci_name(dev), lat);
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
|
|
}
|
|
|
|
unsigned int pcibios_assign_all_busses(void)
|
|
{
|
|
return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
|
|
}
|
|
|
|
int pcibios_enable_device(struct pci_dev *dev, int mask)
|
|
{
|
|
int err;
|
|
|
|
if ((err = pcibios_enable_resources(dev, mask)) < 0)
|
|
return err;
|
|
|
|
return pcibios_plat_dev_init(dev);
|
|
}
|
|
|
|
static void pcibios_fixup_device_resources(struct pci_dev *dev,
|
|
struct pci_bus *bus)
|
|
{
|
|
/* Update device resources. */
|
|
struct pci_controller *hose = (struct pci_controller *)bus->sysdata;
|
|
unsigned long offset = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
|
|
if (!dev->resource[i].start)
|
|
continue;
|
|
if (dev->resource[i].flags & IORESOURCE_IO)
|
|
offset = hose->io_offset;
|
|
else if (dev->resource[i].flags & IORESOURCE_MEM)
|
|
offset = hose->mem_offset;
|
|
|
|
dev->resource[i].start += offset;
|
|
dev->resource[i].end += offset;
|
|
}
|
|
}
|
|
|
|
void __devinit pcibios_fixup_bus(struct pci_bus *bus)
|
|
{
|
|
/* Propagate hose info into the subordinate devices. */
|
|
|
|
struct pci_controller *hose = bus->sysdata;
|
|
struct list_head *ln;
|
|
struct pci_dev *dev = bus->self;
|
|
|
|
if (!dev) {
|
|
bus->resource[0] = hose->io_resource;
|
|
bus->resource[1] = hose->mem_resource;
|
|
} else if (pci_probe_only &&
|
|
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
|
|
pci_read_bridge_bases(bus);
|
|
pcibios_fixup_device_resources(dev, bus);
|
|
}
|
|
|
|
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
|
|
dev = pci_dev_b(ln);
|
|
|
|
if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
|
|
pcibios_fixup_device_resources(dev, bus);
|
|
}
|
|
}
|
|
|
|
void __init
|
|
pcibios_update_irq(struct pci_dev *dev, int irq)
|
|
{
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
|
|
}
|
|
|
|
void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
|
|
struct resource *res)
|
|
{
|
|
struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
|
|
unsigned long offset = 0;
|
|
|
|
if (res->flags & IORESOURCE_IO)
|
|
offset = hose->io_offset;
|
|
else if (res->flags & IORESOURCE_MEM)
|
|
offset = hose->mem_offset;
|
|
|
|
region->start = res->start - offset;
|
|
region->end = res->end - offset;
|
|
}
|
|
|
|
void __devinit
|
|
pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
|
|
struct pci_bus_region *region)
|
|
{
|
|
struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
|
|
unsigned long offset = 0;
|
|
|
|
if (res->flags & IORESOURCE_IO)
|
|
offset = hose->io_offset;
|
|
else if (res->flags & IORESOURCE_MEM)
|
|
offset = hose->mem_offset;
|
|
|
|
res->start = region->start + offset;
|
|
res->end = region->end + offset;
|
|
}
|
|
|
|
#ifdef CONFIG_HOTPLUG
|
|
EXPORT_SYMBOL(pcibios_resource_to_bus);
|
|
EXPORT_SYMBOL(pcibios_bus_to_resource);
|
|
EXPORT_SYMBOL(PCIBIOS_MIN_IO);
|
|
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
|
|
#endif
|
|
|
|
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
|
|
enum pci_mmap_state mmap_state, int write_combine)
|
|
{
|
|
unsigned long prot;
|
|
|
|
/*
|
|
* I/O space can be accessed via normal processor loads and stores on
|
|
* this platform but for now we elect not to do this and portable
|
|
* drivers should not do this anyway.
|
|
*/
|
|
if (mmap_state == pci_mmap_io)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Ignore write-combine; for now only return uncached mappings.
|
|
*/
|
|
prot = pgprot_val(vma->vm_page_prot);
|
|
prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
|
|
vma->vm_page_prot = __pgprot(prot);
|
|
|
|
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
|
|
vma->vm_end - vma->vm_start, vma->vm_page_prot);
|
|
}
|
|
|
|
char * (*pcibios_plat_setup)(char *str) __devinitdata;
|
|
|
|
char *__devinit pcibios_setup(char *str)
|
|
{
|
|
if (pcibios_plat_setup)
|
|
return pcibios_plat_setup(str);
|
|
return str;
|
|
}
|