mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
fd99897245
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1590391864-308-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
342 lines
8.4 KiB
C
342 lines
8.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2013 Broadcom Corporation
|
|
*
|
|
*/
|
|
|
|
#include <linux/debugfs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#define SECWDOG_CTRL_REG 0x00000000
|
|
#define SECWDOG_COUNT_REG 0x00000004
|
|
|
|
#define SECWDOG_RESERVED_MASK 0x1dffffff
|
|
#define SECWDOG_WD_LOAD_FLAG 0x10000000
|
|
#define SECWDOG_EN_MASK 0x08000000
|
|
#define SECWDOG_SRSTEN_MASK 0x04000000
|
|
#define SECWDOG_RES_MASK 0x00f00000
|
|
#define SECWDOG_COUNT_MASK 0x000fffff
|
|
|
|
#define SECWDOG_MAX_COUNT SECWDOG_COUNT_MASK
|
|
#define SECWDOG_CLKS_SHIFT 20
|
|
#define SECWDOG_MAX_RES 15
|
|
#define SECWDOG_DEFAULT_RESOLUTION 4
|
|
#define SECWDOG_MAX_TRY 1000
|
|
|
|
#define SECS_TO_TICKS(x, w) ((x) << (w)->resolution)
|
|
#define TICKS_TO_SECS(x, w) ((x) >> (w)->resolution)
|
|
|
|
#define BCM_KONA_WDT_NAME "bcm_kona_wdt"
|
|
|
|
struct bcm_kona_wdt {
|
|
void __iomem *base;
|
|
/*
|
|
* One watchdog tick is 1/(2^resolution) seconds. Resolution can take
|
|
* the values 0-15, meaning one tick can be 1s to 30.52us. Our default
|
|
* resolution of 4 means one tick is 62.5ms.
|
|
*
|
|
* The watchdog counter is 20 bits. Depending on resolution, the maximum
|
|
* counter value of 0xfffff expires after about 12 days (resolution 0)
|
|
* down to only 32s (resolution 15). The default resolution of 4 gives
|
|
* us a maximum of about 18 hours and 12 minutes before the watchdog
|
|
* times out.
|
|
*/
|
|
int resolution;
|
|
spinlock_t lock;
|
|
#ifdef CONFIG_BCM_KONA_WDT_DEBUG
|
|
unsigned long busy_count;
|
|
struct dentry *debugfs;
|
|
#endif
|
|
};
|
|
|
|
static int secure_register_read(struct bcm_kona_wdt *wdt, uint32_t offset)
|
|
{
|
|
uint32_t val;
|
|
unsigned count = 0;
|
|
|
|
/*
|
|
* If the WD_LOAD_FLAG is set, the watchdog counter field is being
|
|
* updated in hardware. Once the WD timer is updated in hardware, it
|
|
* gets cleared.
|
|
*/
|
|
do {
|
|
if (unlikely(count > 1))
|
|
udelay(5);
|
|
val = readl_relaxed(wdt->base + offset);
|
|
count++;
|
|
} while ((val & SECWDOG_WD_LOAD_FLAG) && count < SECWDOG_MAX_TRY);
|
|
|
|
#ifdef CONFIG_BCM_KONA_WDT_DEBUG
|
|
/* Remember the maximum number iterations due to WD_LOAD_FLAG */
|
|
if (count > wdt->busy_count)
|
|
wdt->busy_count = count;
|
|
#endif
|
|
|
|
/* This is the only place we return a negative value. */
|
|
if (val & SECWDOG_WD_LOAD_FLAG)
|
|
return -ETIMEDOUT;
|
|
|
|
/* We always mask out reserved bits. */
|
|
val &= SECWDOG_RESERVED_MASK;
|
|
|
|
return val;
|
|
}
|
|
|
|
#ifdef CONFIG_BCM_KONA_WDT_DEBUG
|
|
|
|
static int bcm_kona_show(struct seq_file *s, void *data)
|
|
{
|
|
int ctl_val, cur_val;
|
|
unsigned long flags;
|
|
struct bcm_kona_wdt *wdt = s->private;
|
|
|
|
if (!wdt) {
|
|
seq_puts(s, "No device pointer\n");
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_irqsave(&wdt->lock, flags);
|
|
ctl_val = secure_register_read(wdt, SECWDOG_CTRL_REG);
|
|
cur_val = secure_register_read(wdt, SECWDOG_COUNT_REG);
|
|
spin_unlock_irqrestore(&wdt->lock, flags);
|
|
|
|
if (ctl_val < 0 || cur_val < 0) {
|
|
seq_puts(s, "Error accessing hardware\n");
|
|
} else {
|
|
int ctl, cur, ctl_sec, cur_sec, res;
|
|
|
|
ctl = ctl_val & SECWDOG_COUNT_MASK;
|
|
res = (ctl_val & SECWDOG_RES_MASK) >> SECWDOG_CLKS_SHIFT;
|
|
cur = cur_val & SECWDOG_COUNT_MASK;
|
|
ctl_sec = TICKS_TO_SECS(ctl, wdt);
|
|
cur_sec = TICKS_TO_SECS(cur, wdt);
|
|
seq_printf(s,
|
|
"Resolution: %d / %d\n"
|
|
"Control: %d s / %d (%#x) ticks\n"
|
|
"Current: %d s / %d (%#x) ticks\n"
|
|
"Busy count: %lu\n",
|
|
res, wdt->resolution,
|
|
ctl_sec, ctl, ctl,
|
|
cur_sec, cur, cur,
|
|
wdt->busy_count);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SHOW_ATTRIBUTE(bcm_kona);
|
|
|
|
static void bcm_kona_wdt_debug_init(struct platform_device *pdev)
|
|
{
|
|
struct dentry *dir;
|
|
struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev);
|
|
|
|
if (!wdt)
|
|
return;
|
|
|
|
wdt->debugfs = NULL;
|
|
|
|
dir = debugfs_create_dir(BCM_KONA_WDT_NAME, NULL);
|
|
|
|
debugfs_create_file("info", S_IFREG | S_IRUGO, dir, wdt,
|
|
&bcm_kona_fops);
|
|
wdt->debugfs = dir;
|
|
}
|
|
|
|
static void bcm_kona_wdt_debug_exit(struct platform_device *pdev)
|
|
{
|
|
struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev);
|
|
|
|
if (wdt)
|
|
debugfs_remove_recursive(wdt->debugfs);
|
|
}
|
|
|
|
#else
|
|
|
|
static void bcm_kona_wdt_debug_init(struct platform_device *pdev) {}
|
|
static void bcm_kona_wdt_debug_exit(struct platform_device *pdev) {}
|
|
|
|
#endif /* CONFIG_BCM_KONA_WDT_DEBUG */
|
|
|
|
static int bcm_kona_wdt_ctrl_reg_modify(struct bcm_kona_wdt *wdt,
|
|
unsigned mask, unsigned newval)
|
|
{
|
|
int val;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
spin_lock_irqsave(&wdt->lock, flags);
|
|
|
|
val = secure_register_read(wdt, SECWDOG_CTRL_REG);
|
|
if (val < 0) {
|
|
ret = val;
|
|
} else {
|
|
val &= ~mask;
|
|
val |= newval;
|
|
writel_relaxed(val, wdt->base + SECWDOG_CTRL_REG);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&wdt->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bcm_kona_wdt_set_resolution_reg(struct bcm_kona_wdt *wdt)
|
|
{
|
|
if (wdt->resolution > SECWDOG_MAX_RES)
|
|
return -EINVAL;
|
|
|
|
return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_RES_MASK,
|
|
wdt->resolution << SECWDOG_CLKS_SHIFT);
|
|
}
|
|
|
|
static int bcm_kona_wdt_set_timeout_reg(struct watchdog_device *wdog,
|
|
unsigned watchdog_flags)
|
|
{
|
|
struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
|
|
|
|
return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_COUNT_MASK,
|
|
SECS_TO_TICKS(wdog->timeout, wdt) |
|
|
watchdog_flags);
|
|
}
|
|
|
|
static int bcm_kona_wdt_set_timeout(struct watchdog_device *wdog,
|
|
unsigned int t)
|
|
{
|
|
wdog->timeout = t;
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int bcm_kona_wdt_get_timeleft(struct watchdog_device *wdog)
|
|
{
|
|
struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
|
|
int val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&wdt->lock, flags);
|
|
val = secure_register_read(wdt, SECWDOG_COUNT_REG);
|
|
spin_unlock_irqrestore(&wdt->lock, flags);
|
|
|
|
if (val < 0)
|
|
return val;
|
|
|
|
return TICKS_TO_SECS(val & SECWDOG_COUNT_MASK, wdt);
|
|
}
|
|
|
|
static int bcm_kona_wdt_start(struct watchdog_device *wdog)
|
|
{
|
|
return bcm_kona_wdt_set_timeout_reg(wdog,
|
|
SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK);
|
|
}
|
|
|
|
static int bcm_kona_wdt_stop(struct watchdog_device *wdog)
|
|
{
|
|
struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
|
|
|
|
return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_EN_MASK |
|
|
SECWDOG_SRSTEN_MASK, 0);
|
|
}
|
|
|
|
static const struct watchdog_ops bcm_kona_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = bcm_kona_wdt_start,
|
|
.stop = bcm_kona_wdt_stop,
|
|
.set_timeout = bcm_kona_wdt_set_timeout,
|
|
.get_timeleft = bcm_kona_wdt_get_timeleft,
|
|
};
|
|
|
|
static const struct watchdog_info bcm_kona_wdt_info = {
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
|
|
WDIOF_KEEPALIVEPING,
|
|
.identity = "Broadcom Kona Watchdog Timer",
|
|
};
|
|
|
|
static struct watchdog_device bcm_kona_wdt_wdd = {
|
|
.info = &bcm_kona_wdt_info,
|
|
.ops = &bcm_kona_wdt_ops,
|
|
.min_timeout = 1,
|
|
.max_timeout = SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION,
|
|
.timeout = SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION,
|
|
};
|
|
|
|
static int bcm_kona_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct bcm_kona_wdt *wdt;
|
|
int ret;
|
|
|
|
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
|
|
if (!wdt)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&wdt->lock);
|
|
|
|
wdt->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(wdt->base))
|
|
return PTR_ERR(wdt->base);
|
|
|
|
wdt->resolution = SECWDOG_DEFAULT_RESOLUTION;
|
|
ret = bcm_kona_wdt_set_resolution_reg(wdt);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to set resolution (error: %d)", ret);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, wdt);
|
|
watchdog_set_drvdata(&bcm_kona_wdt_wdd, wdt);
|
|
bcm_kona_wdt_wdd.parent = dev;
|
|
|
|
ret = bcm_kona_wdt_set_timeout_reg(&bcm_kona_wdt_wdd, 0);
|
|
if (ret) {
|
|
dev_err(dev, "Failed set watchdog timeout");
|
|
return ret;
|
|
}
|
|
|
|
watchdog_stop_on_reboot(&bcm_kona_wdt_wdd);
|
|
watchdog_stop_on_unregister(&bcm_kona_wdt_wdd);
|
|
ret = devm_watchdog_register_device(dev, &bcm_kona_wdt_wdd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
bcm_kona_wdt_debug_init(pdev);
|
|
dev_dbg(dev, "Broadcom Kona Watchdog Timer");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_kona_wdt_remove(struct platform_device *pdev)
|
|
{
|
|
bcm_kona_wdt_debug_exit(pdev);
|
|
dev_dbg(&pdev->dev, "Watchdog driver disabled");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bcm_kona_wdt_of_match[] = {
|
|
{ .compatible = "brcm,kona-wdt", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm_kona_wdt_of_match);
|
|
|
|
static struct platform_driver bcm_kona_wdt_driver = {
|
|
.driver = {
|
|
.name = BCM_KONA_WDT_NAME,
|
|
.of_match_table = bcm_kona_wdt_of_match,
|
|
},
|
|
.probe = bcm_kona_wdt_probe,
|
|
.remove = bcm_kona_wdt_remove,
|
|
};
|
|
|
|
module_platform_driver(bcm_kona_wdt_driver);
|
|
|
|
MODULE_ALIAS("platform:" BCM_KONA_WDT_NAME);
|
|
MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
|
|
MODULE_DESCRIPTION("Broadcom Kona Watchdog Driver");
|
|
MODULE_LICENSE("GPL v2");
|