linux/drivers/phy/broadcom/phy-brcm-usb-init.h
Al Cooper b0c0b66c0b phy: usb: Add support for wake and USB low power mode for 7211 S2/S5
Add support for 7211 USB wake. Disable all possible 7211 USB logic
for S2/S5 if USB wake is not enabled.

On the 7211, the XHCI wake signal was not connected properly and
only goes to the USB1_USB1_CTRL_TP_DIAG1 diagonstic register.
The workaround is to have VPU code running that polls for the
proper bit in the DIAG register and to wake the system when
the bit is asserted.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08 12:58:06 +05:30

163 lines
4.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2014-2017 Broadcom
*/
#ifndef _USB_BRCM_COMMON_INIT_H
#define _USB_BRCM_COMMON_INIT_H
#include <linux/regmap.h>
#define USB_CTLR_MODE_HOST 0
#define USB_CTLR_MODE_DEVICE 1
#define USB_CTLR_MODE_DRD 2
#define USB_CTLR_MODE_TYPEC_PD 3
enum brcmusb_reg_sel {
BRCM_REGS_CTRL = 0,
BRCM_REGS_XHCI_EC,
BRCM_REGS_XHCI_GBL,
BRCM_REGS_USB_PHY,
BRCM_REGS_USB_MDIO,
BRCM_REGS_BDC_EC,
BRCM_REGS_MAX
};
#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg)
#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg)
#define USB_CTRL_MASK(reg, field) \
USB_CTRL_##reg##_##field##_MASK
#define USB_CTRL_SET(base, reg, field) \
brcm_usb_ctrl_set(USB_CTRL_REG(base, reg), \
USB_CTRL_##reg##_##field##_MASK)
#define USB_CTRL_UNSET(base, reg, field) \
brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg), \
USB_CTRL_##reg##_##field##_MASK)
struct brcm_usb_init_params;
struct brcm_usb_init_ops {
void (*init_ipp)(struct brcm_usb_init_params *params);
void (*init_common)(struct brcm_usb_init_params *params);
void (*init_eohci)(struct brcm_usb_init_params *params);
void (*init_xhci)(struct brcm_usb_init_params *params);
void (*uninit_common)(struct brcm_usb_init_params *params);
void (*uninit_eohci)(struct brcm_usb_init_params *params);
void (*uninit_xhci)(struct brcm_usb_init_params *params);
int (*get_dual_select)(struct brcm_usb_init_params *params);
void (*set_dual_select)(struct brcm_usb_init_params *params, int mode);
};
struct brcm_usb_init_params {
void __iomem *regs[BRCM_REGS_MAX];
int ioc;
int ipp;
int mode;
u32 family_id;
u32 product_id;
int selected_family;
const char *family_name;
const u32 *usb_reg_bits_map;
const struct brcm_usb_init_ops *ops;
struct regmap *syscon_piarbctl;
bool wake_enabled;
bool suspend_with_clocks;
};
void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params);
void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params);
static inline u32 brcm_usb_readl(void __iomem *addr)
{
/*
* MIPS endianness is configured by boot strap, which also reverses all
* bus endianness (i.e., big-endian CPU + big endian bus ==> native
* endian I/O).
*
* Other architectures (e.g., ARM) either do not support big endian, or
* else leave I/O in little endian mode.
*/
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
return __raw_readl(addr);
else
return readl_relaxed(addr);
}
static inline void brcm_usb_writel(u32 val, void __iomem *addr)
{
/* See brcmnand_readl() comments */
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
__raw_writel(val, addr);
else
writel_relaxed(val, addr);
}
static inline void brcm_usb_ctrl_unset(void __iomem *reg, u32 mask)
{
brcm_usb_writel(brcm_usb_readl(reg) & ~(mask), reg);
};
static inline void brcm_usb_ctrl_set(void __iomem *reg, u32 mask)
{
brcm_usb_writel(brcm_usb_readl(reg) | (mask), reg);
};
static inline void brcm_usb_init_ipp(struct brcm_usb_init_params *ini)
{
if (ini->ops->init_ipp)
ini->ops->init_ipp(ini);
}
static inline void brcm_usb_init_common(struct brcm_usb_init_params *ini)
{
if (ini->ops->init_common)
ini->ops->init_common(ini);
}
static inline void brcm_usb_init_eohci(struct brcm_usb_init_params *ini)
{
if (ini->ops->init_eohci)
ini->ops->init_eohci(ini);
}
static inline void brcm_usb_init_xhci(struct brcm_usb_init_params *ini)
{
if (ini->ops->init_xhci)
ini->ops->init_xhci(ini);
}
static inline void brcm_usb_uninit_common(struct brcm_usb_init_params *ini)
{
if (ini->ops->uninit_common)
ini->ops->uninit_common(ini);
}
static inline void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini)
{
if (ini->ops->uninit_eohci)
ini->ops->uninit_eohci(ini);
}
static inline void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini)
{
if (ini->ops->uninit_xhci)
ini->ops->uninit_xhci(ini);
}
static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini)
{
if (ini->ops->get_dual_select)
return ini->ops->get_dual_select(ini);
return 0;
}
static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini,
int mode)
{
if (ini->ops->set_dual_select)
ini->ops->set_dual_select(ini, mode);
}
#endif /* _USB_BRCM_COMMON_INIT_H */