| .. |
|
include/mach
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
|
am200epd.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
am300epd.c
|
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3
|
2009-02-10 11:28:00 +00:00 |
|
balloon3.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
clock.c
|
[ARM] 5536/1: Move clk_add_alias() to arch/arm/common/clkdev.c
|
2009-06-04 17:45:43 +01:00 |
|
clock.h
|
[ARM] pxa: remove left-over struct clk *other field from struct clk
|
2009-09-10 18:49:23 +08:00 |
|
cm-x2xx-pci.c
|
[ARM] pxa: use chip->ack() instead of accessing GEDR directly
|
2010-03-02 07:40:45 +08:00 |
|
cm-x2xx-pci.h
|
|
|
|
cm-x2xx.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
cm-x255.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
|
2010-03-02 07:40:46 +08:00 |
|
cm-x270.c
|
[ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers
|
2010-03-02 07:40:48 +08:00 |
|
cm-x300.c
|
[ARM] pxa/cm-x300: add PWM backlight support
|
2009-12-16 16:49:22 +08:00 |
|
colibri-pxa3xx.c
|
pxa3xx_nand: move pxa3xx_nand.h common into plat directory
|
2009-12-01 09:02:43 +08:00 |
|
colibri-pxa270.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
colibri-pxa300.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
colibri-pxa320.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
corgi_lcd.c
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
corgi_pm.c
|
[ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_*
|
2009-12-01 09:03:01 +08:00 |
|
corgi_ssp.c
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
corgi.c
|
[ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus
|
2010-01-13 21:01:08 +08:00 |
|
cpufreq-pxa2xx.c
|
[ARM] pxa/cpufreq: fix index assignments for end marker
|
2009-11-20 14:23:13 -06:00 |
|
cpufreq-pxa3xx.c
|
[ARM] pxa/cpufreq: fix index assignments for end marker
|
2009-11-20 14:23:13 -06:00 |
|
csb701.c
|
[ARM] pxa/csb701: do not register devices on non-csb726 boads
|
2009-04-04 10:26:35 +08:00 |
|
csb726.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
devices.c
|
[ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c
|
2009-12-16 21:35:52 +08:00 |
|
devices.h
|
[ARM] pxa: add device definition for graphics controller
|
2009-09-10 18:49:27 +08:00 |
|
e330.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
e350.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
e400.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
e740.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
e750.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
e800.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
em-x270.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
|
eseries.c
|
[ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c
|
2009-09-10 18:49:39 +08:00 |
|
eseries.h
|
[ARM] pxa: Add multi-io support for e-series
|
2008-12-15 03:29:34 +00:00 |
|
ezx.c
|
[ARM] pxa/ezx: add leds-lp3944 support for A910 EZX phone
|
2009-12-01 09:03:03 +08:00 |
|
generic.c
|
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
|
2009-03-09 21:22:37 +08:00 |
|
generic.h
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
gumstix.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
h5000.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
himalaya.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
hx4700.c
|
[ARM] pxa/hx4700: actually use platform_lcd driver
|
2009-12-01 09:03:15 +08:00 |
|
idp.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
|
2010-03-02 07:40:46 +08:00 |
|
imote2.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
irq.c
|
[ARM] pxa: fix irq suspend/resume for pxa25x
|
2010-01-13 21:01:09 +08:00 |
|
Kconfig
|
Merge branch 'for-rmk/samsung3' of git://git.fluff.org/bjdooks/linux into devel-stable
|
2010-01-27 22:11:32 +00:00 |
|
leds-idp.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
leds-lubbock.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
leds-mainstone.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
leds.c
|
|
|
|
leds.h
|
|
|
|
littleton.c
|
[ARM] pxa/littleton: add UART3 GPIO config
|
2009-12-29 14:11:28 +08:00 |
|
lpd270.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
lubbock.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
magician.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
|
mainstone.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
Makefile
|
[ARM] pxa/raumfeld: add platform support
|
2009-12-18 15:34:38 +08:00 |
|
Makefile.boot
|
|
|
|
mfp-pxa2xx.c
|
[ARM] pxa: enable GPIO receivers after configuring pins
|
2009-05-18 21:52:09 +08:00 |
|
mfp-pxa3xx.c
|
[ARM] pxa: move common MFP handling code into plat-pxa
|
2009-03-23 10:11:34 +08:00 |
|
mioa701_bootresume.S
|
[ARM] pxa/MioA701: fix memory corruption.
|
2008-11-22 20:57:21 +08:00 |
|
mioa701.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
mp900.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
palmld.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
|
palmt5.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
|
palmtc.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
|
2010-03-02 07:40:46 +08:00 |
|
palmte2.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
|
2010-03-02 07:40:46 +08:00 |
|
palmtreo.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
|
palmtx.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
|
palmz72.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
|
pcm027.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
pcm990-baseboard.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
pm.c
|
[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
|
2009-06-11 23:25:09 +08:00 |
|
poodle.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
|
2010-03-02 07:40:46 +08:00 |
|
pxa2xx.c
|
[ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c
|
2009-09-10 18:49:39 +08:00 |
|
pxa3xx.c
|
[ARM] pxa: add EXT_WAKEUP interrupts handling for pxa3xx
|
2009-12-01 09:02:58 +08:00 |
|
pxa25x.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
pxa27x.c
|
[ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()
|
2010-03-02 07:40:47 +08:00 |
|
pxa300.c
|
[ARM] pxa: add clock definition for graphics controller
|
2009-09-10 18:49:26 +08:00 |
|
pxa320.c
|
[ARM] pxa: add clock definition for graphics controller
|
2009-09-10 18:49:26 +08:00 |
|
pxa930.c
|
[ARM] pxa: support mfp of pxa935
|
2009-09-10 18:49:24 +08:00 |
|
raumfeld.c
|
[ARM] pxa/raumfeld: add platform support
|
2009-12-18 15:34:38 +08:00 |
|
reset.c
|
[ARM] pxa: allow gpio_reset drive high during normal work
|
2009-05-18 21:52:09 +08:00 |
|
saar.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
sharpsl_pm.c
|
[ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_*
|
2009-12-01 09:03:01 +08:00 |
|
sharpsl.h
|
[ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_*
|
2009-12-01 09:03:01 +08:00 |
|
sleep.S
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
smemc.c
|
[ARM] pxa: avoid polluting the kernel's namespace
|
2008-11-28 16:04:54 +00:00 |
|
spitz_pm.c
|
[ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_*
|
2009-12-01 09:03:01 +08:00 |
|
spitz.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
|
ssp.c
|
[ARM] pxa: use platform_device_id table for SSP driver
|
2009-12-01 09:02:52 +08:00 |
|
standby.S
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
stargate2.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
tavorevb.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
time.c
|
arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_mode
|
2010-01-22 17:04:52 +01:00 |
|
tosa-bt.c
|
rfkill: rewrite
|
2009-06-03 14:06:13 -04:00 |
|
tosa.c
|
[ARM] pxa/tosa: make use of the matrix keypad driver
|
2010-03-02 07:40:48 +08:00 |
|
trizeps4.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
viper.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
xcep.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
zeus.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
zylonite_pxa300.c
|
[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
|
2009-12-29 14:11:34 +08:00 |
|
zylonite_pxa320.c
|
[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
|
2009-12-29 14:11:34 +08:00 |
|
zylonite.c
|
[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
|
2009-12-29 14:11:34 +08:00 |
f69a6548c9