mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
359bfcb423
Suspend and resume of cards are handled by the protocol layer and consequently the mmc_suspend|resume_host APIs are marked as deprecated. While moving away from using the deprecated APIs, there are nothing left to be done for the suspend and resume callbacks, so remove them. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
898 lines
21 KiB
C
898 lines
21 KiB
C
/*
|
|
* linux/drivers/mmc/host/pxa.c - PXA MMCI driver
|
|
*
|
|
* Copyright (C) 2003 Russell King, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This hardware is really sick:
|
|
* - No way to clear interrupts.
|
|
* - Have to turn off the clock whenever we touch the device.
|
|
* - Doesn't tell you how many data blocks were transferred.
|
|
* Yuck!
|
|
*
|
|
* 1 and 3 byte data transfers not supported
|
|
* max block length up to 1023
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/io.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#include <asm/sizes.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/dma.h>
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
|
|
#include "pxamci.h"
|
|
|
|
#define DRIVER_NAME "pxa2xx-mci"
|
|
|
|
#define NR_SG 1
|
|
#define CLKRT_OFF (~0)
|
|
|
|
#define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \
|
|
|| cpu_is_pxa935())
|
|
|
|
struct pxamci_host {
|
|
struct mmc_host *mmc;
|
|
spinlock_t lock;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
unsigned long clkrate;
|
|
int irq;
|
|
int dma;
|
|
unsigned int clkrt;
|
|
unsigned int cmdat;
|
|
unsigned int imask;
|
|
unsigned int power_mode;
|
|
struct pxamci_platform_data *pdata;
|
|
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
|
|
dma_addr_t sg_dma;
|
|
struct pxa_dma_desc *sg_cpu;
|
|
unsigned int dma_len;
|
|
|
|
unsigned int dma_dir;
|
|
unsigned int dma_drcmrrx;
|
|
unsigned int dma_drcmrtx;
|
|
|
|
struct regulator *vcc;
|
|
};
|
|
|
|
static inline void pxamci_init_ocr(struct pxamci_host *host)
|
|
{
|
|
#ifdef CONFIG_REGULATOR
|
|
host->vcc = regulator_get_optional(mmc_dev(host->mmc), "vmmc");
|
|
|
|
if (IS_ERR(host->vcc))
|
|
host->vcc = NULL;
|
|
else {
|
|
host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
|
|
if (host->pdata && host->pdata->ocr_mask)
|
|
dev_warn(mmc_dev(host->mmc),
|
|
"ocr_mask/setpower will not be used\n");
|
|
}
|
|
#endif
|
|
if (host->vcc == NULL) {
|
|
/* fall-back to platform data */
|
|
host->mmc->ocr_avail = host->pdata ?
|
|
host->pdata->ocr_mask :
|
|
MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
}
|
|
}
|
|
|
|
static inline int pxamci_set_power(struct pxamci_host *host,
|
|
unsigned char power_mode,
|
|
unsigned int vdd)
|
|
{
|
|
int on;
|
|
|
|
if (host->vcc) {
|
|
int ret;
|
|
|
|
if (power_mode == MMC_POWER_UP) {
|
|
ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
|
|
if (ret)
|
|
return ret;
|
|
} else if (power_mode == MMC_POWER_OFF) {
|
|
ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
if (!host->vcc && host->pdata &&
|
|
gpio_is_valid(host->pdata->gpio_power)) {
|
|
on = ((1 << vdd) & host->pdata->ocr_mask);
|
|
gpio_set_value(host->pdata->gpio_power,
|
|
!!on ^ host->pdata->gpio_power_invert);
|
|
}
|
|
if (!host->vcc && host->pdata && host->pdata->setpower)
|
|
return host->pdata->setpower(mmc_dev(host->mmc), vdd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pxamci_stop_clock(struct pxamci_host *host)
|
|
{
|
|
if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
|
|
unsigned long timeout = 10000;
|
|
unsigned int v;
|
|
|
|
writel(STOP_CLOCK, host->base + MMC_STRPCL);
|
|
|
|
do {
|
|
v = readl(host->base + MMC_STAT);
|
|
if (!(v & STAT_CLK_EN))
|
|
break;
|
|
udelay(1);
|
|
} while (timeout--);
|
|
|
|
if (v & STAT_CLK_EN)
|
|
dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
|
|
}
|
|
}
|
|
|
|
static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
host->imask &= ~mask;
|
|
writel(host->imask, host->base + MMC_I_MASK);
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
host->imask |= mask;
|
|
writel(host->imask, host->base + MMC_I_MASK);
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
|
|
{
|
|
unsigned int nob = data->blocks;
|
|
unsigned long long clks;
|
|
unsigned int timeout;
|
|
bool dalgn = 0;
|
|
u32 dcmd;
|
|
int i;
|
|
|
|
host->data = data;
|
|
|
|
if (data->flags & MMC_DATA_STREAM)
|
|
nob = 0xffff;
|
|
|
|
writel(nob, host->base + MMC_NOB);
|
|
writel(data->blksz, host->base + MMC_BLKLEN);
|
|
|
|
clks = (unsigned long long)data->timeout_ns * host->clkrate;
|
|
do_div(clks, 1000000000UL);
|
|
timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
|
|
writel((timeout + 255) / 256, host->base + MMC_RDTO);
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
host->dma_dir = DMA_FROM_DEVICE;
|
|
dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
|
|
DRCMR(host->dma_drcmrtx) = 0;
|
|
DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
|
|
} else {
|
|
host->dma_dir = DMA_TO_DEVICE;
|
|
dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG;
|
|
DRCMR(host->dma_drcmrrx) = 0;
|
|
DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
|
|
}
|
|
|
|
dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
|
|
|
|
host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
|
|
host->dma_dir);
|
|
|
|
for (i = 0; i < host->dma_len; i++) {
|
|
unsigned int length = sg_dma_len(&data->sg[i]);
|
|
host->sg_cpu[i].dcmd = dcmd | length;
|
|
if (length & 31 && !(data->flags & MMC_DATA_READ))
|
|
host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
|
|
/* Not aligned to 8-byte boundary? */
|
|
if (sg_dma_address(&data->sg[i]) & 0x7)
|
|
dalgn = 1;
|
|
if (data->flags & MMC_DATA_READ) {
|
|
host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
|
|
host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
|
|
} else {
|
|
host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]);
|
|
host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO;
|
|
}
|
|
host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) *
|
|
sizeof(struct pxa_dma_desc);
|
|
}
|
|
host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
|
|
wmb();
|
|
|
|
/*
|
|
* The PXA27x DMA controller encounters overhead when working with
|
|
* unaligned (to 8-byte boundaries) data, so switch on byte alignment
|
|
* mode only if we have unaligned data.
|
|
*/
|
|
if (dalgn)
|
|
DALGN |= (1 << host->dma);
|
|
else
|
|
DALGN &= ~(1 << host->dma);
|
|
DDADR(host->dma) = host->sg_dma;
|
|
|
|
/*
|
|
* workaround for erratum #91:
|
|
* only start DMA now if we are doing a read,
|
|
* otherwise we wait until CMD/RESP has finished
|
|
* before starting DMA.
|
|
*/
|
|
if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ)
|
|
DCSR(host->dma) = DCSR_RUN;
|
|
}
|
|
|
|
static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
|
|
{
|
|
WARN_ON(host->cmd != NULL);
|
|
host->cmd = cmd;
|
|
|
|
if (cmd->flags & MMC_RSP_BUSY)
|
|
cmdat |= CMDAT_BUSY;
|
|
|
|
#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
|
|
switch (RSP_TYPE(mmc_resp_type(cmd))) {
|
|
case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
|
|
cmdat |= CMDAT_RESP_SHORT;
|
|
break;
|
|
case RSP_TYPE(MMC_RSP_R3):
|
|
cmdat |= CMDAT_RESP_R3;
|
|
break;
|
|
case RSP_TYPE(MMC_RSP_R2):
|
|
cmdat |= CMDAT_RESP_R2;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
writel(cmd->opcode, host->base + MMC_CMD);
|
|
writel(cmd->arg >> 16, host->base + MMC_ARGH);
|
|
writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
|
|
writel(cmdat, host->base + MMC_CMDAT);
|
|
writel(host->clkrt, host->base + MMC_CLKRT);
|
|
|
|
writel(START_CLOCK, host->base + MMC_STRPCL);
|
|
|
|
pxamci_enable_irq(host, END_CMD_RES);
|
|
}
|
|
|
|
static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
|
|
{
|
|
host->mrq = NULL;
|
|
host->cmd = NULL;
|
|
host->data = NULL;
|
|
mmc_request_done(host->mmc, mrq);
|
|
}
|
|
|
|
static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
|
|
{
|
|
struct mmc_command *cmd = host->cmd;
|
|
int i;
|
|
u32 v;
|
|
|
|
if (!cmd)
|
|
return 0;
|
|
|
|
host->cmd = NULL;
|
|
|
|
/*
|
|
* Did I mention this is Sick. We always need to
|
|
* discard the upper 8 bits of the first 16-bit word.
|
|
*/
|
|
v = readl(host->base + MMC_RES) & 0xffff;
|
|
for (i = 0; i < 4; i++) {
|
|
u32 w1 = readl(host->base + MMC_RES) & 0xffff;
|
|
u32 w2 = readl(host->base + MMC_RES) & 0xffff;
|
|
cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
|
|
v = w2;
|
|
}
|
|
|
|
if (stat & STAT_TIME_OUT_RESPONSE) {
|
|
cmd->error = -ETIMEDOUT;
|
|
} else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
|
|
/*
|
|
* workaround for erratum #42:
|
|
* Intel PXA27x Family Processor Specification Update Rev 001
|
|
* A bogus CRC error can appear if the msb of a 136 bit
|
|
* response is a one.
|
|
*/
|
|
if (cpu_is_pxa27x() &&
|
|
(cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000))
|
|
pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
|
|
else
|
|
cmd->error = -EILSEQ;
|
|
}
|
|
|
|
pxamci_disable_irq(host, END_CMD_RES);
|
|
if (host->data && !cmd->error) {
|
|
pxamci_enable_irq(host, DATA_TRAN_DONE);
|
|
/*
|
|
* workaround for erratum #91, if doing write
|
|
* enable DMA late
|
|
*/
|
|
if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE)
|
|
DCSR(host->dma) = DCSR_RUN;
|
|
} else {
|
|
pxamci_finish_request(host, host->mrq);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
|
|
if (!data)
|
|
return 0;
|
|
|
|
DCSR(host->dma) = 0;
|
|
dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
|
|
host->dma_dir);
|
|
|
|
if (stat & STAT_READ_TIME_OUT)
|
|
data->error = -ETIMEDOUT;
|
|
else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
|
|
data->error = -EILSEQ;
|
|
|
|
/*
|
|
* There appears to be a hardware design bug here. There seems to
|
|
* be no way to find out how much data was transferred to the card.
|
|
* This means that if there was an error on any block, we mark all
|
|
* data blocks as being in error.
|
|
*/
|
|
if (!data->error)
|
|
data->bytes_xfered = data->blocks * data->blksz;
|
|
else
|
|
data->bytes_xfered = 0;
|
|
|
|
pxamci_disable_irq(host, DATA_TRAN_DONE);
|
|
|
|
host->data = NULL;
|
|
if (host->mrq->stop) {
|
|
pxamci_stop_clock(host);
|
|
pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
|
|
} else {
|
|
pxamci_finish_request(host, host->mrq);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static irqreturn_t pxamci_irq(int irq, void *devid)
|
|
{
|
|
struct pxamci_host *host = devid;
|
|
unsigned int ireg;
|
|
int handled = 0;
|
|
|
|
ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK);
|
|
|
|
if (ireg) {
|
|
unsigned stat = readl(host->base + MMC_STAT);
|
|
|
|
pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
|
|
|
|
if (ireg & END_CMD_RES)
|
|
handled |= pxamci_cmd_done(host, stat);
|
|
if (ireg & DATA_TRAN_DONE)
|
|
handled |= pxamci_data_done(host, stat);
|
|
if (ireg & SDIO_INT) {
|
|
mmc_signal_sdio_irq(host->mmc);
|
|
handled = 1;
|
|
}
|
|
}
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct pxamci_host *host = mmc_priv(mmc);
|
|
unsigned int cmdat;
|
|
|
|
WARN_ON(host->mrq != NULL);
|
|
|
|
host->mrq = mrq;
|
|
|
|
pxamci_stop_clock(host);
|
|
|
|
cmdat = host->cmdat;
|
|
host->cmdat &= ~CMDAT_INIT;
|
|
|
|
if (mrq->data) {
|
|
pxamci_setup_data(host, mrq->data);
|
|
|
|
cmdat &= ~CMDAT_BUSY;
|
|
cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
|
|
if (mrq->data->flags & MMC_DATA_WRITE)
|
|
cmdat |= CMDAT_WRITE;
|
|
|
|
if (mrq->data->flags & MMC_DATA_STREAM)
|
|
cmdat |= CMDAT_STREAM;
|
|
}
|
|
|
|
pxamci_start_cmd(host, mrq->cmd, cmdat);
|
|
}
|
|
|
|
static int pxamci_get_ro(struct mmc_host *mmc)
|
|
{
|
|
struct pxamci_host *host = mmc_priv(mmc);
|
|
|
|
if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) {
|
|
if (host->pdata->gpio_card_ro_invert)
|
|
return !gpio_get_value(host->pdata->gpio_card_ro);
|
|
else
|
|
return gpio_get_value(host->pdata->gpio_card_ro);
|
|
}
|
|
if (host->pdata && host->pdata->get_ro)
|
|
return !!host->pdata->get_ro(mmc_dev(mmc));
|
|
/*
|
|
* Board doesn't support read only detection; let the mmc core
|
|
* decide what to do.
|
|
*/
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct pxamci_host *host = mmc_priv(mmc);
|
|
|
|
if (ios->clock) {
|
|
unsigned long rate = host->clkrate;
|
|
unsigned int clk = rate / ios->clock;
|
|
|
|
if (host->clkrt == CLKRT_OFF)
|
|
clk_enable(host->clk);
|
|
|
|
if (ios->clock == 26000000) {
|
|
/* to support 26MHz */
|
|
host->clkrt = 7;
|
|
} else {
|
|
/* to handle (19.5MHz, 26MHz) */
|
|
if (!clk)
|
|
clk = 1;
|
|
|
|
/*
|
|
* clk might result in a lower divisor than we
|
|
* desire. check for that condition and adjust
|
|
* as appropriate.
|
|
*/
|
|
if (rate / clk > ios->clock)
|
|
clk <<= 1;
|
|
host->clkrt = fls(clk) - 1;
|
|
}
|
|
|
|
/*
|
|
* we write clkrt on the next command
|
|
*/
|
|
} else {
|
|
pxamci_stop_clock(host);
|
|
if (host->clkrt != CLKRT_OFF) {
|
|
host->clkrt = CLKRT_OFF;
|
|
clk_disable(host->clk);
|
|
}
|
|
}
|
|
|
|
if (host->power_mode != ios->power_mode) {
|
|
int ret;
|
|
|
|
host->power_mode = ios->power_mode;
|
|
|
|
ret = pxamci_set_power(host, ios->power_mode, ios->vdd);
|
|
if (ret) {
|
|
dev_err(mmc_dev(mmc), "unable to set power\n");
|
|
/*
|
|
* The .set_ios() function in the mmc_host_ops
|
|
* struct return void, and failing to set the
|
|
* power should be rare so we print an error and
|
|
* return here.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
if (ios->power_mode == MMC_POWER_ON)
|
|
host->cmdat |= CMDAT_INIT;
|
|
}
|
|
|
|
if (ios->bus_width == MMC_BUS_WIDTH_4)
|
|
host->cmdat |= CMDAT_SD_4DAT;
|
|
else
|
|
host->cmdat &= ~CMDAT_SD_4DAT;
|
|
|
|
dev_dbg(mmc_dev(mmc), "PXAMCI: clkrt = %x cmdat = %x\n",
|
|
host->clkrt, host->cmdat);
|
|
}
|
|
|
|
static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
|
|
{
|
|
struct pxamci_host *pxa_host = mmc_priv(host);
|
|
|
|
if (enable)
|
|
pxamci_enable_irq(pxa_host, SDIO_INT);
|
|
else
|
|
pxamci_disable_irq(pxa_host, SDIO_INT);
|
|
}
|
|
|
|
static const struct mmc_host_ops pxamci_ops = {
|
|
.request = pxamci_request,
|
|
.get_ro = pxamci_get_ro,
|
|
.set_ios = pxamci_set_ios,
|
|
.enable_sdio_irq = pxamci_enable_sdio_irq,
|
|
};
|
|
|
|
static void pxamci_dma_irq(int dma, void *devid)
|
|
{
|
|
struct pxamci_host *host = devid;
|
|
int dcsr = DCSR(dma);
|
|
DCSR(dma) = dcsr & ~DCSR_STOPIRQEN;
|
|
|
|
if (dcsr & DCSR_ENDINTR) {
|
|
writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
|
|
} else {
|
|
pr_err("%s: DMA error on channel %d (DCSR=%#x)\n",
|
|
mmc_hostname(host->mmc), dma, dcsr);
|
|
host->data->error = -EIO;
|
|
pxamci_data_done(host, 0);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t pxamci_detect_irq(int irq, void *devid)
|
|
{
|
|
struct pxamci_host *host = mmc_priv(devid);
|
|
|
|
mmc_detect_change(devid, msecs_to_jiffies(host->pdata->detect_delay_ms));
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id pxa_mmc_dt_ids[] = {
|
|
{ .compatible = "marvell,pxa-mmc" },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids);
|
|
|
|
static int pxamci_of_init(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct pxamci_platform_data *pdata;
|
|
u32 tmp;
|
|
|
|
if (!np)
|
|
return 0;
|
|
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
pdata->gpio_card_detect =
|
|
of_get_named_gpio(np, "cd-gpios", 0);
|
|
pdata->gpio_card_ro =
|
|
of_get_named_gpio(np, "wp-gpios", 0);
|
|
|
|
/* pxa-mmc specific */
|
|
pdata->gpio_power =
|
|
of_get_named_gpio(np, "pxa-mmc,gpio-power", 0);
|
|
|
|
if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0)
|
|
pdata->detect_delay_ms = tmp;
|
|
|
|
pdev->dev.platform_data = pdata;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int pxamci_of_init(struct platform_device *pdev)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int pxamci_probe(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct pxamci_host *host = NULL;
|
|
struct resource *r, *dmarx, *dmatx;
|
|
int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
|
|
|
|
ret = pxamci_of_init(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!r || irq < 0)
|
|
return -ENXIO;
|
|
|
|
r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
|
|
if (!r)
|
|
return -EBUSY;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev);
|
|
if (!mmc) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
mmc->ops = &pxamci_ops;
|
|
|
|
/*
|
|
* We can do SG-DMA, but we don't because we never know how much
|
|
* data we successfully wrote to the card.
|
|
*/
|
|
mmc->max_segs = NR_SG;
|
|
|
|
/*
|
|
* Our hardware DMA can handle a maximum of one page per SG entry.
|
|
*/
|
|
mmc->max_seg_size = PAGE_SIZE;
|
|
|
|
/*
|
|
* Block length register is only 10 bits before PXA27x.
|
|
*/
|
|
mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048;
|
|
|
|
/*
|
|
* Block count register is 16 bits.
|
|
*/
|
|
mmc->max_blk_count = 65535;
|
|
|
|
host = mmc_priv(mmc);
|
|
host->mmc = mmc;
|
|
host->dma = -1;
|
|
host->pdata = pdev->dev.platform_data;
|
|
host->clkrt = CLKRT_OFF;
|
|
|
|
host->clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(host->clk)) {
|
|
ret = PTR_ERR(host->clk);
|
|
host->clk = NULL;
|
|
goto out;
|
|
}
|
|
|
|
host->clkrate = clk_get_rate(host->clk);
|
|
|
|
/*
|
|
* Calculate minimum clock rate, rounding up.
|
|
*/
|
|
mmc->f_min = (host->clkrate + 63) / 64;
|
|
mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
|
|
|
|
pxamci_init_ocr(host);
|
|
|
|
mmc->caps = 0;
|
|
host->cmdat = 0;
|
|
if (!cpu_is_pxa25x()) {
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
|
|
host->cmdat |= CMDAT_SDIO_INT_EN;
|
|
if (mmc_has_26MHz())
|
|
mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
|
|
MMC_CAP_SD_HIGHSPEED;
|
|
}
|
|
|
|
host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
|
|
if (!host->sg_cpu) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
spin_lock_init(&host->lock);
|
|
host->res = r;
|
|
host->irq = irq;
|
|
host->imask = MMC_I_MASK_ALL;
|
|
|
|
host->base = ioremap(r->start, SZ_4K);
|
|
if (!host->base) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Ensure that the host controller is shut down, and setup
|
|
* with our defaults.
|
|
*/
|
|
pxamci_stop_clock(host);
|
|
writel(0, host->base + MMC_SPI);
|
|
writel(64, host->base + MMC_RESTO);
|
|
writel(host->imask, host->base + MMC_I_MASK);
|
|
|
|
host->dma = pxa_request_dma(DRIVER_NAME, DMA_PRIO_LOW,
|
|
pxamci_dma_irq, host);
|
|
if (host->dma < 0) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
|
|
if (ret)
|
|
goto out;
|
|
|
|
platform_set_drvdata(pdev, mmc);
|
|
|
|
dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
|
|
if (!dmarx) {
|
|
ret = -ENXIO;
|
|
goto out;
|
|
}
|
|
host->dma_drcmrrx = dmarx->start;
|
|
|
|
dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
|
|
if (!dmatx) {
|
|
ret = -ENXIO;
|
|
goto out;
|
|
}
|
|
host->dma_drcmrtx = dmatx->start;
|
|
|
|
if (host->pdata) {
|
|
gpio_cd = host->pdata->gpio_card_detect;
|
|
gpio_ro = host->pdata->gpio_card_ro;
|
|
gpio_power = host->pdata->gpio_power;
|
|
}
|
|
if (gpio_is_valid(gpio_power)) {
|
|
ret = gpio_request(gpio_power, "mmc card power");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", gpio_power);
|
|
goto out;
|
|
}
|
|
gpio_direction_output(gpio_power,
|
|
host->pdata->gpio_power_invert);
|
|
}
|
|
if (gpio_is_valid(gpio_ro)) {
|
|
ret = gpio_request(gpio_ro, "mmc card read only");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
|
|
goto err_gpio_ro;
|
|
}
|
|
gpio_direction_input(gpio_ro);
|
|
}
|
|
if (gpio_is_valid(gpio_cd)) {
|
|
ret = gpio_request(gpio_cd, "mmc card detect");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
|
|
goto err_gpio_cd;
|
|
}
|
|
gpio_direction_input(gpio_cd);
|
|
|
|
ret = request_irq(gpio_to_irq(gpio_cd), pxamci_detect_irq,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
|
"mmc card detect", mmc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to request card detect IRQ\n");
|
|
goto err_request_irq;
|
|
}
|
|
}
|
|
|
|
if (host->pdata && host->pdata->init)
|
|
host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
|
|
|
|
if (gpio_is_valid(gpio_power) && host->pdata->setpower)
|
|
dev_warn(&pdev->dev, "gpio_power and setpower() both defined\n");
|
|
if (gpio_is_valid(gpio_ro) && host->pdata->get_ro)
|
|
dev_warn(&pdev->dev, "gpio_ro and get_ro() both defined\n");
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
return 0;
|
|
|
|
err_request_irq:
|
|
gpio_free(gpio_cd);
|
|
err_gpio_cd:
|
|
gpio_free(gpio_ro);
|
|
err_gpio_ro:
|
|
gpio_free(gpio_power);
|
|
out:
|
|
if (host) {
|
|
if (host->dma >= 0)
|
|
pxa_free_dma(host->dma);
|
|
if (host->base)
|
|
iounmap(host->base);
|
|
if (host->sg_cpu)
|
|
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
|
|
if (host->clk)
|
|
clk_put(host->clk);
|
|
}
|
|
if (mmc)
|
|
mmc_free_host(mmc);
|
|
release_resource(r);
|
|
return ret;
|
|
}
|
|
|
|
static int pxamci_remove(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
int gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
|
|
|
|
if (mmc) {
|
|
struct pxamci_host *host = mmc_priv(mmc);
|
|
|
|
mmc_remove_host(mmc);
|
|
|
|
if (host->pdata) {
|
|
gpio_cd = host->pdata->gpio_card_detect;
|
|
gpio_ro = host->pdata->gpio_card_ro;
|
|
gpio_power = host->pdata->gpio_power;
|
|
}
|
|
if (gpio_is_valid(gpio_cd)) {
|
|
free_irq(gpio_to_irq(gpio_cd), mmc);
|
|
gpio_free(gpio_cd);
|
|
}
|
|
if (gpio_is_valid(gpio_ro))
|
|
gpio_free(gpio_ro);
|
|
if (gpio_is_valid(gpio_power))
|
|
gpio_free(gpio_power);
|
|
if (host->vcc)
|
|
regulator_put(host->vcc);
|
|
|
|
if (host->pdata && host->pdata->exit)
|
|
host->pdata->exit(&pdev->dev, mmc);
|
|
|
|
pxamci_stop_clock(host);
|
|
writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
|
|
END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
|
|
host->base + MMC_I_MASK);
|
|
|
|
DRCMR(host->dma_drcmrrx) = 0;
|
|
DRCMR(host->dma_drcmrtx) = 0;
|
|
|
|
free_irq(host->irq, host);
|
|
pxa_free_dma(host->dma);
|
|
iounmap(host->base);
|
|
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
|
|
|
|
clk_put(host->clk);
|
|
|
|
release_resource(host->res);
|
|
|
|
mmc_free_host(mmc);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver pxamci_driver = {
|
|
.probe = pxamci_probe,
|
|
.remove = pxamci_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(pxa_mmc_dt_ids),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(pxamci_driver);
|
|
|
|
MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:pxa2xx-mci");
|