linux/arch/powerpc/kernel/crash_dump.c
Olaf Hering 93a72052be crash_dump: export is_kdump_kernel to modules, consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn
The Xen PV drivers in a crashed HVM guest can not connect to the dom0
backend drivers because both frontend and backend drivers are still in
connected state.  To run the connection reset function only in case of a
crashdump, the is_kdump_kernel() function needs to be available for the PV
driver modules.

Consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn into
kernel/crash_dump.c Also export elfcorehdr_addr to make is_kdump_kernel()
usable for modules.

Leave 'elfcorehdr' as early_param().  This changes powerpc from __setup()
to early_param().  It adds an address range check from x86 also on ia64
and powerpc.

[akpm@linux-foundation.org: additional #includes]
[akpm@linux-foundation.org: remove elfcorehdr_addr export]
[akpm@linux-foundation.org: fix for Tejun's mm/nobootmem.c changes]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:19 -07:00

160 lines
4.2 KiB
C

/*
* Routines for doing kexec-based kdump.
*
* Copyright (C) 2005, IBM Corp.
*
* Created by: Michael Ellerman
*
* This source code is licensed under the GNU General Public License,
* Version 2. See the file COPYING for more details.
*/
#undef DEBUG
#include <linux/crash_dump.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <asm/code-patching.h>
#include <asm/kdump.h>
#include <asm/prom.h>
#include <asm/firmware.h>
#include <asm/uaccess.h>
#include <asm/rtas.h>
#ifdef DEBUG
#include <asm/udbg.h>
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
#ifndef CONFIG_RELOCATABLE
void __init reserve_kdump_trampoline(void)
{
memblock_reserve(0, KDUMP_RESERVE_LIMIT);
}
static void __init create_trampoline(unsigned long addr)
{
unsigned int *p = (unsigned int *)addr;
/* The maximum range of a single instruction branch, is the current
* instruction's address + (32 MB - 4) bytes. For the trampoline we
* need to branch to current address + 32 MB. So we insert a nop at
* the trampoline address, then the next instruction (+ 4 bytes)
* does a branch to (32 MB - 4). The net effect is that when we
* branch to "addr" we jump to ("addr" + 32 MB). Although it requires
* two instructions it doesn't require any registers.
*/
patch_instruction(p, PPC_INST_NOP);
patch_branch(++p, addr + PHYSICAL_START, 0);
}
void __init setup_kdump_trampoline(void)
{
unsigned long i;
DBG(" -> setup_kdump_trampoline()\n");
for (i = KDUMP_TRAMPOLINE_START; i < KDUMP_TRAMPOLINE_END; i += 8) {
create_trampoline(i);
}
#ifdef CONFIG_PPC_PSERIES
create_trampoline(__pa(system_reset_fwnmi) - PHYSICAL_START);
create_trampoline(__pa(machine_check_fwnmi) - PHYSICAL_START);
#endif /* CONFIG_PPC_PSERIES */
DBG(" <- setup_kdump_trampoline()\n");
}
#endif /* CONFIG_RELOCATABLE */
static int __init parse_savemaxmem(char *p)
{
if (p)
saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1;
return 1;
}
__setup("savemaxmem=", parse_savemaxmem);
static size_t copy_oldmem_vaddr(void *vaddr, char *buf, size_t csize,
unsigned long offset, int userbuf)
{
if (userbuf) {
if (copy_to_user((char __user *)buf, (vaddr + offset), csize))
return -EFAULT;
} else
memcpy(buf, (vaddr + offset), csize);
return csize;
}
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied
* @buf: target memory address for the copy; this can be in kernel address
* space or user address space (see @userbuf)
* @csize: number of bytes to copy
* @offset: offset in bytes into the page (based on pfn) to begin the copy
* @userbuf: if set, @buf is in user address space, use copy_to_user(),
* otherwise @buf is in kernel address space, use memcpy().
*
* Copy a page from "oldmem". For this page, there is no pte mapped
* in the current kernel. We stitch up a pte, similar to kmap_atomic.
*/
ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
size_t csize, unsigned long offset, int userbuf)
{
void *vaddr;
if (!csize)
return 0;
csize = min_t(size_t, csize, PAGE_SIZE);
if ((min_low_pfn < pfn) && (pfn < max_pfn)) {
vaddr = __va(pfn << PAGE_SHIFT);
csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
} else {
vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
iounmap(vaddr);
}
return csize;
}
#ifdef CONFIG_PPC_RTAS
/*
* The crashkernel region will almost always overlap the RTAS region, so
* we have to be careful when shrinking the crashkernel region.
*/
void crash_free_reserved_phys_range(unsigned long begin, unsigned long end)
{
unsigned long addr;
const u32 *basep, *sizep;
unsigned int rtas_start = 0, rtas_end = 0;
basep = of_get_property(rtas.dev, "linux,rtas-base", NULL);
sizep = of_get_property(rtas.dev, "rtas-size", NULL);
if (basep && sizep) {
rtas_start = *basep;
rtas_end = *basep + *sizep;
}
for (addr = begin; addr < end; addr += PAGE_SIZE) {
/* Does this page overlap with the RTAS region? */
if (addr <= rtas_end && ((addr + PAGE_SIZE) > rtas_start))
continue;
ClearPageReserved(pfn_to_page(addr >> PAGE_SHIFT));
init_page_count(pfn_to_page(addr >> PAGE_SHIFT));
free_page((unsigned long)__va(addr));
totalram_pages++;
}
}
#endif