linux/arch/arm/plat-mxc/tzic.c
Jason Liu 98de0cbbe2 ARM:i.MX: fix build error in tzic/avic.c
arch/arm/plat-mxc/tzic.c:105: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'tzic_handle_irq'

Signed-off-by: Jason Liu <jason.hui@linaro.org>
2011-11-04 03:54:17 +08:00

190 lines
5.0 KiB
C

/*
* Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include "irq-common.h"
/*
*****************************************
* TZIC Registers *
*****************************************
*/
#define TZIC_INTCNTL 0x0000 /* Control register */
#define TZIC_INTTYPE 0x0004 /* Controller Type register */
#define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */
#define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */
#define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */
#define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */
#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
#define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
#define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */
#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */
#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */
#define TZIC_PND0 0x0D00 /* Pending Register 0 */
#define TZIC_HIPND(i) (0x0D80+ ((i) << 2)) /* High Priority Pending Register */
#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */
#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */
#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
#define TZIC_NUM_IRQS 128
#ifdef CONFIG_FIQ
static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
{
unsigned int index, mask, value;
index = irq >> 5;
if (unlikely(index >= 4))
return -EINVAL;
mask = 1U << (irq & 0x1F);
value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
if (type)
value &= ~mask;
__raw_writel(value, tzic_base + TZIC_INTSEC0(index));
return 0;
}
#else
#define tzic_set_irq_fiq NULL
#endif
static unsigned int *wakeup_intr[4];
static struct mxc_extra_irq tzic_extra_irq = {
#ifdef CONFIG_FIQ
.set_irq_fiq = tzic_set_irq_fiq,
#endif
};
static __init void tzic_init_gc(unsigned int irq_start)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
int idx = irq_start >> 5;
gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
handle_level_irq);
gc->private = &tzic_extra_irq;
gc->wake_enabled = IRQ_MSK(32);
wakeup_intr[idx] = &gc->wake_active;
ct = gc->chip_types;
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
ct->chip.irq_set_wake = irq_gc_set_wake;
ct->regs.disable = TZIC_ENCLEAR0(idx);
ct->regs.enable = TZIC_ENSET0(idx);
irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
}
asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
{
u32 stat;
int i, irqofs, handled;
do {
handled = 0;
for (i = 0; i < 4; i++) {
stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
__raw_readl(tzic_base + TZIC_INTSEC0(i));
while (stat) {
handled = 1;
irqofs = fls(stat) - 1;
handle_IRQ(irqofs + i * 32, regs);
stat &= ~(1 << irqofs);
}
}
} while (handled);
}
/*
* This function initializes the TZIC hardware and disables all the
* interrupts. It registers the interrupt enable and disable functions
* to the kernel for each interrupt source.
*/
void __init tzic_init_irq(void __iomem *irqbase)
{
int i;
tzic_base = irqbase;
/* put the TZIC into the reset value with
* all interrupts disabled
*/
i = __raw_readl(tzic_base + TZIC_INTCNTL);
__raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
__raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
__raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
for (i = 0; i < 4; i++)
__raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
/* disable all interrupts */
for (i = 0; i < 4; i++)
__raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
/* all IRQ no FIQ Warning :: No selection */
for (i = 0; i < TZIC_NUM_IRQS; i += 32)
tzic_init_gc(i);
#ifdef CONFIG_FIQ
/* Initialize FIQ */
init_FIQ();
#endif
pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
}
/**
* tzic_enable_wake() - enable wakeup interrupt
*
* @param is_idle 1 if called in idle loop (ENSET0 register);
* 0 to be used when called from low power entry
* @return 0 if successful; non-zero otherwise
*/
int tzic_enable_wake(int is_idle)
{
unsigned int i, v;
__raw_writel(1, tzic_base + TZIC_DSMINT);
if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
return -EAGAIN;
for (i = 0; i < 4; i++) {
v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
*wakeup_intr[i];
__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
}
return 0;
}