mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 12:52:30 +00:00
05aa788c06
This prepares the pwm-raspberrypi-poe driver to further changes of the pwm core outlined in the commit introducing devm_pwmchip_alloc(). There is no intended semantical change and the driver should behave as before. Link: https://lore.kernel.org/r/4654a6438ab618574afc3bb73bf402df7c254ee2.1707900770.git.u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
197 lines
4.7 KiB
C
197 lines
4.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2021 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
|
|
* For more information on Raspberry Pi's PoE hat see:
|
|
* https://www.raspberrypi.org/products/poe-hat/
|
|
*
|
|
* Limitations:
|
|
* - No disable bit, so a disabled PWM is simulated by duty_cycle 0
|
|
* - Only normal polarity
|
|
* - Fixed 12.5 kHz period
|
|
*
|
|
* The current period is completed when HW is reconfigured.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
|
|
#include <soc/bcm2835/raspberrypi-firmware.h>
|
|
#include <dt-bindings/pwm/raspberrypi,firmware-poe-pwm.h>
|
|
|
|
#define RPI_PWM_MAX_DUTY 255
|
|
#define RPI_PWM_PERIOD_NS 80000 /* 12.5 kHz */
|
|
|
|
#define RPI_PWM_CUR_DUTY_REG 0x0
|
|
|
|
struct raspberrypi_pwm {
|
|
struct rpi_firmware *firmware;
|
|
unsigned int duty_cycle;
|
|
};
|
|
|
|
struct raspberrypi_pwm_prop {
|
|
__le32 reg;
|
|
__le32 val;
|
|
__le32 ret;
|
|
} __packed;
|
|
|
|
static inline
|
|
struct raspberrypi_pwm *raspberrypi_pwm_from_chip(struct pwm_chip *chip)
|
|
{
|
|
return pwmchip_get_drvdata(chip);
|
|
}
|
|
|
|
static int raspberrypi_pwm_set_property(struct rpi_firmware *firmware,
|
|
u32 reg, u32 val)
|
|
{
|
|
struct raspberrypi_pwm_prop msg = {
|
|
.reg = cpu_to_le32(reg),
|
|
.val = cpu_to_le32(val),
|
|
};
|
|
int ret;
|
|
|
|
ret = rpi_firmware_property(firmware, RPI_FIRMWARE_SET_POE_HAT_VAL,
|
|
&msg, sizeof(msg));
|
|
if (ret)
|
|
return ret;
|
|
if (msg.ret)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int raspberrypi_pwm_get_property(struct rpi_firmware *firmware,
|
|
u32 reg, u32 *val)
|
|
{
|
|
struct raspberrypi_pwm_prop msg = {
|
|
.reg = cpu_to_le32(reg),
|
|
};
|
|
int ret;
|
|
|
|
ret = rpi_firmware_property(firmware, RPI_FIRMWARE_GET_POE_HAT_VAL,
|
|
&msg, sizeof(msg));
|
|
if (ret)
|
|
return ret;
|
|
if (msg.ret)
|
|
return -EIO;
|
|
|
|
*val = le32_to_cpu(msg.val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int raspberrypi_pwm_get_state(struct pwm_chip *chip,
|
|
struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct raspberrypi_pwm *rpipwm = raspberrypi_pwm_from_chip(chip);
|
|
|
|
state->period = RPI_PWM_PERIOD_NS;
|
|
state->duty_cycle = DIV_ROUND_UP(rpipwm->duty_cycle * RPI_PWM_PERIOD_NS,
|
|
RPI_PWM_MAX_DUTY);
|
|
state->enabled = !!(rpipwm->duty_cycle);
|
|
state->polarity = PWM_POLARITY_NORMAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int raspberrypi_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
struct raspberrypi_pwm *rpipwm = raspberrypi_pwm_from_chip(chip);
|
|
unsigned int duty_cycle;
|
|
int ret;
|
|
|
|
if (state->period < RPI_PWM_PERIOD_NS ||
|
|
state->polarity != PWM_POLARITY_NORMAL)
|
|
return -EINVAL;
|
|
|
|
if (!state->enabled)
|
|
duty_cycle = 0;
|
|
else if (state->duty_cycle < RPI_PWM_PERIOD_NS)
|
|
duty_cycle = DIV_ROUND_DOWN_ULL(state->duty_cycle * RPI_PWM_MAX_DUTY,
|
|
RPI_PWM_PERIOD_NS);
|
|
else
|
|
duty_cycle = RPI_PWM_MAX_DUTY;
|
|
|
|
if (duty_cycle == rpipwm->duty_cycle)
|
|
return 0;
|
|
|
|
ret = raspberrypi_pwm_set_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG,
|
|
duty_cycle);
|
|
if (ret) {
|
|
dev_err(pwmchip_parent(chip), "Failed to set duty cycle: %pe\n",
|
|
ERR_PTR(ret));
|
|
return ret;
|
|
}
|
|
|
|
rpipwm->duty_cycle = duty_cycle;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops raspberrypi_pwm_ops = {
|
|
.get_state = raspberrypi_pwm_get_state,
|
|
.apply = raspberrypi_pwm_apply,
|
|
};
|
|
|
|
static int raspberrypi_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *firmware_node;
|
|
struct device *dev = &pdev->dev;
|
|
struct rpi_firmware *firmware;
|
|
struct pwm_chip *chip;
|
|
struct raspberrypi_pwm *rpipwm;
|
|
int ret;
|
|
|
|
firmware_node = of_get_parent(dev->of_node);
|
|
if (!firmware_node) {
|
|
dev_err(dev, "Missing firmware node\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
firmware = devm_rpi_firmware_get(&pdev->dev, firmware_node);
|
|
of_node_put(firmware_node);
|
|
if (!firmware)
|
|
return dev_err_probe(dev, -EPROBE_DEFER,
|
|
"Failed to get firmware handle\n");
|
|
|
|
chip = devm_pwmchip_alloc(&pdev->dev, RASPBERRYPI_FIRMWARE_PWM_NUM,
|
|
sizeof(*rpipwm));
|
|
if (IS_ERR(chip))
|
|
return PTR_ERR(chip);
|
|
rpipwm = raspberrypi_pwm_from_chip(chip);
|
|
|
|
rpipwm->firmware = firmware;
|
|
chip->ops = &raspberrypi_pwm_ops;
|
|
|
|
ret = raspberrypi_pwm_get_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG,
|
|
&rpipwm->duty_cycle);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get duty cycle: %pe\n", ERR_PTR(ret));
|
|
return ret;
|
|
}
|
|
|
|
return devm_pwmchip_add(dev, chip);
|
|
}
|
|
|
|
static const struct of_device_id raspberrypi_pwm_of_match[] = {
|
|
{ .compatible = "raspberrypi,firmware-poe-pwm", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, raspberrypi_pwm_of_match);
|
|
|
|
static struct platform_driver raspberrypi_pwm_driver = {
|
|
.driver = {
|
|
.name = "raspberrypi-poe-pwm",
|
|
.of_match_table = raspberrypi_pwm_of_match,
|
|
},
|
|
.probe = raspberrypi_pwm_probe,
|
|
};
|
|
module_platform_driver(raspberrypi_pwm_driver);
|
|
|
|
MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
|
|
MODULE_DESCRIPTION("Raspberry Pi Firmware Based PWM Bus Driver");
|
|
MODULE_LICENSE("GPL v2");
|