linux/drivers/media/radio/radio-maxiradio.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

468 lines
11 KiB
C

/*
* Guillemot Maxi Radio FM 2000 PCI radio card driver for Linux
* (C) 2001 Dimitromanolakis Apostolos <apdim@grecian.net>
*
* Based in the radio Maestro PCI driver. Actually it uses the same chip
* for radio but different pci controller.
*
* I didn't have any specs I reversed engineered the protocol from
* the windows driver (radio.dll).
*
* The card uses the TEA5757 chip that includes a search function but it
* is useless as I haven't found any way to read back the frequency. If
* anybody does please mail me.
*
* For the pdf file see:
* http://www.semiconductors.philips.com/pip/TEA5757H/V1
*
*
* CHANGES:
* 0.75b
* - better pci interface thanks to Francois Romieu <romieu@cogenit.fr>
*
* 0.75 Sun Feb 4 22:51:27 EET 2001
* - tiding up
* - removed support for multiple devices as it didn't work anyway
*
* BUGS:
* - card unmutes if you change frequency
*
* (c) 2006, 2007 by Mauro Carvalho Chehab <mchehab@infradead.org>:
* - Conversion to V4L2 API
* - Uses video_ioctl2 for parsing and to add debug support
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/pci.h>
#include <linux/videodev2.h>
#include <linux/version.h> /* for KERNEL_VERSION MACRO */
#include <linux/io.h>
#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
MODULE_AUTHOR("Dimitromanolakis Apostolos, apdim@grecian.net");
MODULE_DESCRIPTION("Radio driver for the Guillemot Maxi Radio FM2000 radio.");
MODULE_LICENSE("GPL");
static int radio_nr = -1;
module_param(radio_nr, int, 0);
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "activates debug info");
#define DRIVER_VERSION "0.77"
#define RADIO_VERSION KERNEL_VERSION(0, 7, 7)
#define dprintk(dev, num, fmt, arg...) \
v4l2_dbg(num, debug, &dev->v4l2_dev, fmt, ## arg)
#ifndef PCI_VENDOR_ID_GUILLEMOT
#define PCI_VENDOR_ID_GUILLEMOT 0x5046
#endif
#ifndef PCI_DEVICE_ID_GUILLEMOT
#define PCI_DEVICE_ID_GUILLEMOT_MAXIRADIO 0x1001
#endif
/* TEA5757 pin mappings */
static const int clk = 1, data = 2, wren = 4, mo_st = 8, power = 16;
#define FREQ_LO (50 * 16000)
#define FREQ_HI (150 * 16000)
#define FREQ_IF 171200 /* 10.7*16000 */
#define FREQ_STEP 200 /* 12.5*16 */
/* (x==fmhz*16*1000) -> bits */
#define FREQ2BITS(x) \
((((unsigned int)(x) + FREQ_IF + (FREQ_STEP << 1)) / (FREQ_STEP << 2)) << 2)
#define BITS2FREQ(x) ((x) * FREQ_STEP - FREQ_IF)
struct maxiradio
{
struct v4l2_device v4l2_dev;
struct video_device vdev;
struct pci_dev *pdev;
u16 io; /* base of radio io */
u16 muted; /* VIDEO_AUDIO_MUTE */
u16 stereo; /* VIDEO_TUNER_STEREO_ON */
u16 tuned; /* signal strength (0 or 0xffff) */
unsigned long freq;
struct mutex lock;
};
static inline struct maxiradio *to_maxiradio(struct v4l2_device *v4l2_dev)
{
return container_of(v4l2_dev, struct maxiradio, v4l2_dev);
}
static void outbit(unsigned long bit, u16 io)
{
int val = power | wren | (bit ? data : 0);
outb(val, io);
udelay(4);
outb(val | clk, io);
udelay(4);
outb(val, io);
udelay(4);
}
static void turn_power(struct maxiradio *dev, int p)
{
if (p != 0) {
dprintk(dev, 1, "Radio powered on\n");
outb(power, dev->io);
} else {
dprintk(dev, 1, "Radio powered off\n");
outb(0, dev->io);
}
}
static void set_freq(struct maxiradio *dev, u32 freq)
{
unsigned long int si;
int bl;
int io = dev->io;
int val = FREQ2BITS(freq);
/* TEA5757 shift register bits (see pdf) */
outbit(0, io); /* 24 search */
outbit(1, io); /* 23 search up/down */
outbit(0, io); /* 22 stereo/mono */
outbit(0, io); /* 21 band */
outbit(0, io); /* 20 band (only 00=FM works I think) */
outbit(0, io); /* 19 port ? */
outbit(0, io); /* 18 port ? */
outbit(0, io); /* 17 search level */
outbit(0, io); /* 16 search level */
si = 0x8000;
for (bl = 1; bl <= 16; bl++) {
outbit(val & si, io);
si >>= 1;
}
dprintk(dev, 1, "Radio freq set to %d.%02d MHz\n",
freq / 16000,
freq % 16000 * 100 / 16000);
turn_power(dev, 1);
}
static int get_stereo(u16 io)
{
outb(power,io);
udelay(4);
return !(inb(io) & mo_st);
}
static int get_tune(u16 io)
{
outb(power+clk,io);
udelay(4);
return !(inb(io) & mo_st);
}
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *v)
{
struct maxiradio *dev = video_drvdata(file);
strlcpy(v->driver, "radio-maxiradio", sizeof(v->driver));
strlcpy(v->card, "Maxi Radio FM2000 radio", sizeof(v->card));
snprintf(v->bus_info, sizeof(v->bus_info), "PCI:%s", pci_name(dev->pdev));
v->version = RADIO_VERSION;
v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
return 0;
}
static int vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
struct maxiradio *dev = video_drvdata(file);
if (v->index > 0)
return -EINVAL;
mutex_lock(&dev->lock);
strlcpy(v->name, "FM", sizeof(v->name));
v->type = V4L2_TUNER_RADIO;
v->rangelow = FREQ_LO;
v->rangehigh = FREQ_HI;
v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
v->capability = V4L2_TUNER_CAP_LOW;
if (get_stereo(dev->io))
v->audmode = V4L2_TUNER_MODE_STEREO;
else
v->audmode = V4L2_TUNER_MODE_MONO;
v->signal = 0xffff * get_tune(dev->io);
mutex_unlock(&dev->lock);
return 0;
}
static int vidioc_s_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
return v->index ? -EINVAL : 0;
}
static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
{
*i = 0;
return 0;
}
static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
{
return i ? -EINVAL : 0;
}
static int vidioc_g_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
a->index = 0;
strlcpy(a->name, "Radio", sizeof(a->name));
a->capability = V4L2_AUDCAP_STEREO;
return 0;
}
static int vidioc_s_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
return a->index ? -EINVAL : 0;
}
static int vidioc_s_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct maxiradio *dev = video_drvdata(file);
if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
return -EINVAL;
if (f->frequency < FREQ_LO || f->frequency > FREQ_HI) {
dprintk(dev, 1, "radio freq (%d.%02d MHz) out of range (%d-%d)\n",
f->frequency / 16000,
f->frequency % 16000 * 100 / 16000,
FREQ_LO / 16000, FREQ_HI / 16000);
return -EINVAL;
}
mutex_lock(&dev->lock);
dev->freq = f->frequency;
set_freq(dev, dev->freq);
msleep(125);
mutex_unlock(&dev->lock);
return 0;
}
static int vidioc_g_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct maxiradio *dev = video_drvdata(file);
if (f->tuner != 0)
return -EINVAL;
f->type = V4L2_TUNER_RADIO;
f->frequency = dev->freq;
dprintk(dev, 4, "radio freq is %d.%02d MHz",
f->frequency / 16000,
f->frequency % 16000 * 100 / 16000);
return 0;
}
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qc)
{
switch (qc->id) {
case V4L2_CID_AUDIO_MUTE:
return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
}
return -EINVAL;
}
static int vidioc_g_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct maxiradio *dev = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
ctrl->value = dev->muted;
return 0;
}
return -EINVAL;
}
static int vidioc_s_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct maxiradio *dev = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
mutex_lock(&dev->lock);
dev->muted = ctrl->value;
if (dev->muted)
turn_power(dev, 0);
else
set_freq(dev, dev->freq);
mutex_unlock(&dev->lock);
return 0;
}
return -EINVAL;
}
static const struct v4l2_file_operations maxiradio_fops = {
.owner = THIS_MODULE,
.ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = {
.vidioc_querycap = vidioc_querycap,
.vidioc_g_tuner = vidioc_g_tuner,
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
};
static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct maxiradio *dev;
struct v4l2_device *v4l2_dev;
int retval = -ENOMEM;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
dev_err(&pdev->dev, "not enough memory\n");
return -ENOMEM;
}
v4l2_dev = &dev->v4l2_dev;
mutex_init(&dev->lock);
dev->pdev = pdev;
dev->muted = 1;
dev->freq = FREQ_LO;
strlcpy(v4l2_dev->name, "maxiradio", sizeof(v4l2_dev->name));
retval = v4l2_device_register(&pdev->dev, v4l2_dev);
if (retval < 0) {
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
goto errfr;
}
if (!request_region(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0), "Maxi Radio FM 2000")) {
v4l2_err(v4l2_dev, "can't reserve I/O ports\n");
goto err_out;
}
if (pci_enable_device(pdev))
goto err_out_free_region;
dev->io = pci_resource_start(pdev, 0);
strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name));
dev->vdev.v4l2_dev = v4l2_dev;
dev->vdev.fops = &maxiradio_fops;
dev->vdev.ioctl_ops = &maxiradio_ioctl_ops;
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_err(v4l2_dev, "can't register device!");
goto err_out_free_region;
}
v4l2_info(v4l2_dev, "version " DRIVER_VERSION
" time " __TIME__ " " __DATE__ "\n");
v4l2_info(v4l2_dev, "found Guillemot MAXI Radio device (io = 0x%x)\n",
dev->io);
return 0;
err_out_free_region:
release_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
err_out:
v4l2_device_unregister(v4l2_dev);
errfr:
kfree(dev);
return -ENODEV;
}
static void __devexit maxiradio_remove_one(struct pci_dev *pdev)
{
struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
struct maxiradio *dev = to_maxiradio(v4l2_dev);
video_unregister_device(&dev->vdev);
v4l2_device_unregister(&dev->v4l2_dev);
release_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
}
static struct pci_device_id maxiradio_pci_tbl[] = {
{ PCI_VENDOR_ID_GUILLEMOT, PCI_DEVICE_ID_GUILLEMOT_MAXIRADIO,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, maxiradio_pci_tbl);
static struct pci_driver maxiradio_driver = {
.name = "radio-maxiradio",
.id_table = maxiradio_pci_tbl,
.probe = maxiradio_init_one,
.remove = __devexit_p(maxiradio_remove_one),
};
static int __init maxiradio_radio_init(void)
{
return pci_register_driver(&maxiradio_driver);
}
static void __exit maxiradio_radio_exit(void)
{
pci_unregister_driver(&maxiradio_driver);
}
module_init(maxiradio_radio_init);
module_exit(maxiradio_radio_exit);