mirror of
https://github.com/torvalds/linux.git
synced 2024-11-19 18:41:48 +00:00
791d3ef2e1
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
28 lines
838 B
Plaintext
28 lines
838 B
Plaintext
* NXP PCA PCA9564/PCA9665 I2C controller
|
|
|
|
The PCA9564/PCA9665 serves as an interface between most standard
|
|
parallel-bus microcontrollers/microprocessors and the serial I2C-bus
|
|
and allows the parallel bus system to communicate bi-directionally
|
|
with the I2C-bus.
|
|
|
|
Required properties :
|
|
|
|
- reg : Offset and length of the register set for the device
|
|
- compatible : one of "nxp,pca9564" or "nxp,pca9665"
|
|
|
|
Optional properties
|
|
- interrupts : the interrupt number
|
|
- reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line
|
|
is active low, it should be marked GPIO_ACTIVE_LOW.
|
|
- clock-frequency : I2C bus frequency.
|
|
|
|
Example:
|
|
i2c0: i2c@80000 {
|
|
compatible = "nxp,pca9564";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x80000 0x4>;
|
|
reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
|
clock-frequency = <100000>;
|
|
};
|