linux/drivers/gpio/gpio-regmap.c
Michael Walle ebe363197e gpio: add a reusable generic gpio_chip using regmap
There are quite a lot simple GPIO controller which are using regmap to
access the hardware. This driver tries to be a base to unify existing
code into one place. This won't cover everything but it should be a good
starting point.

It does not implement its own irq_chip because there is already a
generic one for regmap based devices. Instead, the irq_chip will be
instantiated in the parent driver and its irq domain will be associate
to this driver.

For now it consists of the usual registers, like set (and an optional
clear) data register, an input register and direction registers.
Out-of-the-box, it supports consecutive register mappings and mappings
where the registers have gaps between them with a linear mapping between
GPIO offset and bit position. For weirder mappings the user can register
its own .xlate().

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200528145845.31436-3-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-03 10:48:37 +02:00

350 lines
8.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* regmap based generic GPIO driver
*
* Copyright 2020 Michael Walle <michael@walle.cc>
*/
#include <linux/gpio/driver.h>
#include <linux/gpio/regmap.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
struct gpio_regmap {
struct device *parent;
struct regmap *regmap;
struct gpio_chip gpio_chip;
int reg_stride;
int ngpio_per_reg;
unsigned int reg_dat_base;
unsigned int reg_set_base;
unsigned int reg_clr_base;
unsigned int reg_dir_in_base;
unsigned int reg_dir_out_base;
int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base,
unsigned int offset, unsigned int *reg,
unsigned int *mask);
void *driver_data;
};
static unsigned int gpio_regmap_addr(unsigned int addr)
{
if (addr == GPIO_REGMAP_ADDR_ZERO)
return 0;
return addr;
}
static int gpio_regmap_simple_xlate(struct gpio_regmap *gpio,
unsigned int base, unsigned int offset,
unsigned int *reg, unsigned int *mask)
{
unsigned int line = offset % gpio->ngpio_per_reg;
unsigned int stride = offset / gpio->ngpio_per_reg;
*reg = base + stride * gpio->reg_stride;
*mask = BIT(line);
return 0;
}
static int gpio_regmap_get(struct gpio_chip *chip, unsigned int offset)
{
struct gpio_regmap *gpio = gpiochip_get_data(chip);
unsigned int base, val, reg, mask;
int ret;
/* we might not have an output register if we are input only */
if (gpio->reg_dat_base)
base = gpio_regmap_addr(gpio->reg_dat_base);
else
base = gpio_regmap_addr(gpio->reg_set_base);
ret = gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
if (ret)
return ret;
ret = regmap_read(gpio->regmap, reg, &val);
if (ret)
return ret;
return !!(val & mask);
}
static void gpio_regmap_set(struct gpio_chip *chip, unsigned int offset,
int val)
{
struct gpio_regmap *gpio = gpiochip_get_data(chip);
unsigned int base = gpio_regmap_addr(gpio->reg_set_base);
unsigned int reg, mask;
gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
if (val)
regmap_update_bits(gpio->regmap, reg, mask, mask);
else
regmap_update_bits(gpio->regmap, reg, mask, 0);
}
static void gpio_regmap_set_with_clear(struct gpio_chip *chip,
unsigned int offset, int val)
{
struct gpio_regmap *gpio = gpiochip_get_data(chip);
unsigned int base, reg, mask;
if (val)
base = gpio_regmap_addr(gpio->reg_set_base);
else
base = gpio_regmap_addr(gpio->reg_clr_base);
gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
regmap_write(gpio->regmap, reg, mask);
}
static int gpio_regmap_get_direction(struct gpio_chip *chip,
unsigned int offset)
{
struct gpio_regmap *gpio = gpiochip_get_data(chip);
unsigned int base, val, reg, mask;
int invert, ret;
if (gpio->reg_dir_out_base) {
base = gpio_regmap_addr(gpio->reg_dir_out_base);
invert = 0;
} else if (gpio->reg_dir_in_base) {
base = gpio_regmap_addr(gpio->reg_dir_in_base);
invert = 1;
} else {
return -EOPNOTSUPP;
}
ret = gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
if (ret)
return ret;
ret = regmap_read(gpio->regmap, reg, &val);
if (ret)
return ret;
if (!!(val & mask) ^ invert)
return GPIO_LINE_DIRECTION_OUT;
else
return GPIO_LINE_DIRECTION_IN;
}
static int gpio_regmap_set_direction(struct gpio_chip *chip,
unsigned int offset, bool output)
{
struct gpio_regmap *gpio = gpiochip_get_data(chip);
unsigned int base, val, reg, mask;
int invert, ret;
if (gpio->reg_dir_out_base) {
base = gpio_regmap_addr(gpio->reg_dir_out_base);
invert = 0;
} else if (gpio->reg_dir_in_base) {
base = gpio_regmap_addr(gpio->reg_dir_in_base);
invert = 1;
} else {
return -EOPNOTSUPP;
}
ret = gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
if (ret)
return ret;
if (invert)
val = output ? 0 : mask;
else
val = output ? mask : 0;
return regmap_update_bits(gpio->regmap, reg, mask, val);
}
static int gpio_regmap_direction_input(struct gpio_chip *chip,
unsigned int offset)
{
return gpio_regmap_set_direction(chip, offset, false);
}
static int gpio_regmap_direction_output(struct gpio_chip *chip,
unsigned int offset, int value)
{
gpio_regmap_set(chip, offset, value);
return gpio_regmap_set_direction(chip, offset, true);
}
void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data)
{
gpio->driver_data = data;
}
EXPORT_SYMBOL_GPL(gpio_regmap_set_drvdata);
void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio)
{
return gpio->driver_data;
}
EXPORT_SYMBOL_GPL(gpio_regmap_get_drvdata);
/**
* gpio_regmap_register() - Register a generic regmap GPIO controller
* @config: configuration for gpio_regmap
*
* Return: A pointer to the registered gpio_regmap or ERR_PTR error value.
*/
struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config)
{
struct gpio_regmap *gpio;
struct gpio_chip *chip;
int ret;
if (!config->parent)
return ERR_PTR(-EINVAL);
if (!config->ngpio)
return ERR_PTR(-EINVAL);
/* we need at least one */
if (!config->reg_dat_base && !config->reg_set_base)
return ERR_PTR(-EINVAL);
/* if we have a direction register we need both input and output */
if ((config->reg_dir_out_base || config->reg_dir_in_base) &&
(!config->reg_dat_base || !config->reg_set_base))
return ERR_PTR(-EINVAL);
/* we don't support having both registers simultaneously for now */
if (config->reg_dir_out_base && config->reg_dir_in_base)
return ERR_PTR(-EINVAL);
gpio = kzalloc(sizeof(*gpio), GFP_KERNEL);
if (!gpio)
return ERR_PTR(-ENOMEM);
gpio->parent = config->parent;
gpio->regmap = config->regmap;
gpio->ngpio_per_reg = config->ngpio_per_reg;
gpio->reg_stride = config->reg_stride;
gpio->reg_mask_xlate = config->reg_mask_xlate;
gpio->reg_dat_base = config->reg_dat_base;
gpio->reg_set_base = config->reg_set_base;
gpio->reg_clr_base = config->reg_clr_base;
gpio->reg_dir_in_base = config->reg_dir_in_base;
gpio->reg_dir_out_base = config->reg_dir_out_base;
/* if not set, assume there is only one register */
if (!gpio->ngpio_per_reg)
gpio->ngpio_per_reg = config->ngpio;
/* if not set, assume they are consecutive */
if (!gpio->reg_stride)
gpio->reg_stride = 1;
if (!gpio->reg_mask_xlate)
gpio->reg_mask_xlate = gpio_regmap_simple_xlate;
chip = &gpio->gpio_chip;
chip->parent = config->parent;
chip->base = -1;
chip->ngpio = config->ngpio;
chip->names = config->names;
chip->label = config->label ?: dev_name(config->parent);
/*
* If our regmap is fast_io we should probably set can_sleep to false.
* Right now, the regmap doesn't save this property, nor is there any
* access function for it.
* The only regmap type which uses fast_io is regmap-mmio. For now,
* assume a safe default of true here.
*/
chip->can_sleep = true;
chip->get = gpio_regmap_get;
if (gpio->reg_set_base && gpio->reg_clr_base)
chip->set = gpio_regmap_set_with_clear;
else if (gpio->reg_set_base)
chip->set = gpio_regmap_set;
if (gpio->reg_dir_in_base || gpio->reg_dir_out_base) {
chip->get_direction = gpio_regmap_get_direction;
chip->direction_input = gpio_regmap_direction_input;
chip->direction_output = gpio_regmap_direction_output;
}
ret = gpiochip_add_data(chip, gpio);
if (ret < 0)
goto err_free_gpio;
if (config->irq_domain) {
ret = gpiochip_irqchip_add_domain(chip, config->irq_domain);
if (ret)
goto err_remove_gpiochip;
}
return gpio;
err_remove_gpiochip:
gpiochip_remove(chip);
err_free_gpio:
kfree(gpio);
return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(gpio_regmap_register);
/**
* gpio_regmap_unregister() - Unregister a generic regmap GPIO controller
* @gpio: gpio_regmap device to unregister
*/
void gpio_regmap_unregister(struct gpio_regmap *gpio)
{
gpiochip_remove(&gpio->gpio_chip);
kfree(gpio);
}
EXPORT_SYMBOL_GPL(gpio_regmap_unregister);
static void devm_gpio_regmap_unregister(struct device *dev, void *res)
{
gpio_regmap_unregister(*(struct gpio_regmap **)res);
}
/**
* devm_gpio_regmap_register() - resource managed gpio_regmap_register()
* @dev: device that is registering this GPIO device
* @config: configuration for gpio_regmap
*
* Managed gpio_regmap_register(). For generic regmap GPIO device registered by
* this function, gpio_regmap_unregister() is automatically called on driver
* detach. See gpio_regmap_register() for more information.
*
* Return: A pointer to the registered gpio_regmap or ERR_PTR error value.
*/
struct gpio_regmap *devm_gpio_regmap_register(struct device *dev,
const struct gpio_regmap_config *config)
{
struct gpio_regmap **ptr, *gpio;
ptr = devres_alloc(devm_gpio_regmap_unregister, sizeof(*ptr),
GFP_KERNEL);
if (!ptr)
return ERR_PTR(-ENOMEM);
gpio = gpio_regmap_register(config);
if (!IS_ERR(gpio)) {
*ptr = gpio;
devres_add(dev, ptr);
} else {
devres_free(ptr);
}
return gpio;
}
EXPORT_SYMBOL_GPL(devm_gpio_regmap_register);
MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
MODULE_DESCRIPTION("GPIO generic regmap driver core");
MODULE_LICENSE("GPL");