mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 18:11:56 +00:00
16ee792e45
* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits) ARM: tegra: update defconfig arm/tegra: Harmony: Configure PMC for low-level interrupts arm/tegra: device tree support for ventana board arm/tegra: add support for ventana pinmuxing arm/tegra: prepare Seaboard pinmux code for derived boards arm/tegra: pinmux: ioremap registers gpio/tegra: Convert to a platform device arm/tegra: Convert pinmux driver to a platform device arm/dt: Tegra: Add pinmux node to tegra20.dtsi arm/tegra: Prep boards for gpio/pinmux conversion to pdevs ARM: mx5: fix clock usage for suspend ARM i.MX entry-macro.S: remove now unused code ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER ARM i.MX tzic: add handle_irq function ARM i.MX avic: add handle_irq function ARM: mx25: Add the missing IIM base definition ARM i.MX avic: convert to use generic irq chip mx31moboard: Add poweroff support ARM: mach-qong: Add watchdog support ARM: davinci: AM18x: Add wl1271/wlan support ... Fix up conflicts in: arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-mx5/devices-imx53.h arch/arm/plat-mxc/include/mach/memory.h
301 lines
8.2 KiB
C
301 lines
8.2 KiB
C
/*
|
|
*
|
|
* Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
|
|
*
|
|
* based on board-mx51_babbage.c which is
|
|
* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
* Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <mach/eukrea-baseboards.h>
|
|
#include <mach/common.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/iomux-mx51.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include "devices-imx51.h"
|
|
|
|
#define CPUIMX51_USBH1_STP IMX_GPIO_NR(1, 27)
|
|
#define CPUIMX51_QUARTA_GPIO IMX_GPIO_NR(3, 28)
|
|
#define CPUIMX51_QUARTB_GPIO IMX_GPIO_NR(3, 25)
|
|
#define CPUIMX51_QUARTC_GPIO IMX_GPIO_NR(3, 26)
|
|
#define CPUIMX51_QUARTD_GPIO IMX_GPIO_NR(3, 27)
|
|
#define CPUIMX51_QUART_XTAL 14745600
|
|
#define CPUIMX51_QUART_REGSHIFT 17
|
|
|
|
/* USB_CTRL_1 */
|
|
#define MX51_USB_CTRL_1_OFFSET 0x10
|
|
#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
|
|
|
|
#define MX51_USB_PLLDIV_12_MHZ 0x00
|
|
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
|
|
#define MX51_USB_PLL_DIV_24_MHZ 0x02
|
|
|
|
static struct plat_serial8250_port serial_platform_data[] = {
|
|
{
|
|
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
|
|
.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
|
|
.irqflags = IRQF_TRIGGER_HIGH,
|
|
.uartclk = CPUIMX51_QUART_XTAL,
|
|
.regshift = CPUIMX51_QUART_REGSHIFT,
|
|
.iotype = UPIO_MEM,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
|
|
}, {
|
|
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
|
|
.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
|
|
.irqflags = IRQF_TRIGGER_HIGH,
|
|
.uartclk = CPUIMX51_QUART_XTAL,
|
|
.regshift = CPUIMX51_QUART_REGSHIFT,
|
|
.iotype = UPIO_MEM,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
|
|
}, {
|
|
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
|
|
.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
|
|
.irqflags = IRQF_TRIGGER_HIGH,
|
|
.uartclk = CPUIMX51_QUART_XTAL,
|
|
.regshift = CPUIMX51_QUART_REGSHIFT,
|
|
.iotype = UPIO_MEM,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
|
|
}, {
|
|
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
|
|
.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
|
|
.irqflags = IRQF_TRIGGER_HIGH,
|
|
.uartclk = CPUIMX51_QUART_XTAL,
|
|
.regshift = CPUIMX51_QUART_REGSHIFT,
|
|
.iotype = UPIO_MEM,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
|
|
}, {
|
|
}
|
|
};
|
|
|
|
static struct platform_device serial_device = {
|
|
.name = "serial8250",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = serial_platform_data,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&serial_device,
|
|
};
|
|
|
|
static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
|
|
/* UART1 */
|
|
MX51_PAD_UART1_RXD__UART1_RXD,
|
|
MX51_PAD_UART1_TXD__UART1_TXD,
|
|
MX51_PAD_UART1_RTS__UART1_RTS,
|
|
MX51_PAD_UART1_CTS__UART1_CTS,
|
|
|
|
/* I2C2 */
|
|
MX51_PAD_GPIO1_2__I2C2_SCL,
|
|
MX51_PAD_GPIO1_3__I2C2_SDA,
|
|
MX51_PAD_NANDF_D10__GPIO3_30,
|
|
|
|
/* QUART IRQ */
|
|
MX51_PAD_NANDF_D15__GPIO3_25,
|
|
MX51_PAD_NANDF_D14__GPIO3_26,
|
|
MX51_PAD_NANDF_D13__GPIO3_27,
|
|
MX51_PAD_NANDF_D12__GPIO3_28,
|
|
|
|
/* USB HOST1 */
|
|
MX51_PAD_USBH1_CLK__USBH1_CLK,
|
|
MX51_PAD_USBH1_DIR__USBH1_DIR,
|
|
MX51_PAD_USBH1_NXT__USBH1_NXT,
|
|
MX51_PAD_USBH1_DATA0__USBH1_DATA0,
|
|
MX51_PAD_USBH1_DATA1__USBH1_DATA1,
|
|
MX51_PAD_USBH1_DATA2__USBH1_DATA2,
|
|
MX51_PAD_USBH1_DATA3__USBH1_DATA3,
|
|
MX51_PAD_USBH1_DATA4__USBH1_DATA4,
|
|
MX51_PAD_USBH1_DATA5__USBH1_DATA5,
|
|
MX51_PAD_USBH1_DATA6__USBH1_DATA6,
|
|
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
|
|
MX51_PAD_USBH1_STP__USBH1_STP,
|
|
};
|
|
|
|
static const struct mxc_nand_platform_data
|
|
eukrea_cpuimx51_nand_board_info __initconst = {
|
|
.width = 1,
|
|
.hw_ecc = 1,
|
|
.flash_bbt = 1,
|
|
};
|
|
|
|
static const struct imxuart_platform_data uart_pdata __initconst = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
static const
|
|
struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
|
|
.bitrate = 100000,
|
|
};
|
|
|
|
static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("pcf8563", 0x51),
|
|
},
|
|
};
|
|
|
|
/* This function is board specific as the bit mask for the plldiv will also
|
|
be different for other Freescale SoCs, thus a common bitmask is not
|
|
possible and cannot get place in /plat-mxc/ehci.c.*/
|
|
static int initialize_otg_port(struct platform_device *pdev)
|
|
{
|
|
u32 v;
|
|
void __iomem *usb_base;
|
|
void __iomem *usbother_base;
|
|
|
|
usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
|
|
if (!usb_base)
|
|
return -ENOMEM;
|
|
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
|
|
|
|
/* Set the PHY clock to 19.2MHz */
|
|
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
|
|
v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
|
|
v |= MX51_USB_PLL_DIV_19_2_MHZ;
|
|
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
|
|
iounmap(usb_base);
|
|
|
|
mdelay(10);
|
|
|
|
return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
|
|
}
|
|
|
|
static int initialize_usbh1_port(struct platform_device *pdev)
|
|
{
|
|
u32 v;
|
|
void __iomem *usb_base;
|
|
void __iomem *usbother_base;
|
|
|
|
usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
|
|
if (!usb_base)
|
|
return -ENOMEM;
|
|
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
|
|
|
|
/* The clock for the USBH1 ULPI port will come externally from the PHY. */
|
|
v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
|
|
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
|
|
iounmap(usb_base);
|
|
|
|
mdelay(10);
|
|
|
|
return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
|
|
MXC_EHCI_ITC_NO_THRESHOLD);
|
|
}
|
|
|
|
static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
|
|
.init = initialize_otg_port,
|
|
.portsc = MXC_EHCI_UTMI_16BIT,
|
|
};
|
|
|
|
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
|
|
.operating_mode = FSL_USB2_DR_DEVICE,
|
|
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
|
|
};
|
|
|
|
static const struct mxc_usbh_platform_data usbh1_config __initconst = {
|
|
.init = initialize_usbh1_port,
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
};
|
|
|
|
static int otg_mode_host;
|
|
|
|
static int __init eukrea_cpuimx51_otg_mode(char *options)
|
|
{
|
|
if (!strcmp(options, "host"))
|
|
otg_mode_host = 1;
|
|
else if (!strcmp(options, "device"))
|
|
otg_mode_host = 0;
|
|
else
|
|
pr_info("otg_mode neither \"host\" nor \"device\". "
|
|
"Defaulting to device\n");
|
|
return 0;
|
|
}
|
|
__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
|
|
|
|
/*
|
|
* Board specific initialization.
|
|
*/
|
|
static void __init eukrea_cpuimx51_init(void)
|
|
{
|
|
imx51_soc_init();
|
|
|
|
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
|
|
ARRAY_SIZE(eukrea_cpuimx51_pads));
|
|
|
|
imx51_add_imx_uart(0, &uart_pdata);
|
|
imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
|
|
|
|
gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
|
|
gpio_direction_input(CPUIMX51_QUARTA_GPIO);
|
|
gpio_free(CPUIMX51_QUARTA_GPIO);
|
|
gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
|
|
gpio_direction_input(CPUIMX51_QUARTB_GPIO);
|
|
gpio_free(CPUIMX51_QUARTB_GPIO);
|
|
gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
|
|
gpio_direction_input(CPUIMX51_QUARTC_GPIO);
|
|
gpio_free(CPUIMX51_QUARTC_GPIO);
|
|
gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
|
|
gpio_direction_input(CPUIMX51_QUARTD_GPIO);
|
|
gpio_free(CPUIMX51_QUARTD_GPIO);
|
|
|
|
imx51_add_fec(NULL);
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
|
|
imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
|
|
i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
|
|
ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
|
|
|
|
if (otg_mode_host)
|
|
imx51_add_mxc_ehci_otg(&dr_utmi_config);
|
|
else {
|
|
initialize_otg_port(NULL);
|
|
imx51_add_fsl_usb2_udc(&usb_pdata);
|
|
}
|
|
imx51_add_mxc_ehci_hs(1, &usbh1_config);
|
|
|
|
#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
|
|
eukrea_mbimx51_baseboard_init();
|
|
#endif
|
|
}
|
|
|
|
static void __init eukrea_cpuimx51_timer_init(void)
|
|
{
|
|
mx51_clocks_init(32768, 24000000, 22579200, 0);
|
|
}
|
|
|
|
static struct sys_timer mxc_timer = {
|
|
.init = eukrea_cpuimx51_timer_init,
|
|
};
|
|
|
|
MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
|
|
/* Maintainer: Eric Bénard <eric@eukrea.com> */
|
|
.atag_offset = 0x100,
|
|
.map_io = mx51_map_io,
|
|
.init_early = imx51_init_early,
|
|
.init_irq = mx51_init_irq,
|
|
.handle_irq = imx51_handle_irq,
|
|
.timer = &mxc_timer,
|
|
.init_machine = eukrea_cpuimx51_init,
|
|
MACHINE_END
|