linux/drivers/firmware
Kevin Brodsky ea8b1c4a60 drivers: psci: PSCI checker module
On arm and arm64, PSCI is one of the possible firmware interfaces
used for power management. This includes both turning CPUs on and off,
and suspending them (entering idle states).

This patch adds a PSCI checker module that enables basic testing of
PSCI operations during startup. There are two main tests: CPU
hotplugging and suspending.

In the hotplug tests, the hotplug API is used to turn off and on again
all CPUs in the system, and then all CPUs in each cluster, checking
the consistency of the return codes.

In the suspend tests, a high-priority thread is created on each core
and uses low-level cpuidle functionalities to enter suspend, in all
the possible states and multiple times. This should allow a maximum
number of CPUs to enter the same sleep state at the same or slightly
different time.

In essence, the suspend tests use a principle similar to that of the
intel_powerclamp driver (drivers/thermal/intel_powerclamp.c), but the
threads are only kept for the duration of the test (they are already
gone when userspace is started) and it does not require to stop/start
the tick.

While in theory power management PSCI functions (CPU_{ON,OFF,SUSPEND})
could be directly called, this proved too difficult as it would imply
the duplication of all the logic used by the kernel to allow for a
clean shutdown/bringup/suspend of the CPU (the deepest sleep states
implying potentially the shutdown of the CPU).

Note that this file cannot be compiled as a loadable module, since it
uses a number of non-exported identifiers (essentially for
PSCI-specific checks and direct use of cpuidle) and relies on the
absence of userspace to avoid races when calling hotplug and cpuidle
functions.

For now at least, CONFIG_PSCI_CHECKER is mutually exclusive with
CONFIG_TORTURE_TEST, because torture tests may also use hotplug and
cause false positives in the hotplug tests.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> [torture test config]
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
[lpieralisi: added cpuidle locking, reworded commit log/kconfig entry]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-25 23:25:52 +01:00
..
broadcom tree-wide: replace config_enabled() with IS_ENABLED() 2016-08-04 08:50:07 -04:00
efi efi/arm: Fix absolute relocation detection for older toolchains 2016-10-19 14:49:44 +02:00
google firmware-gsmi: Delete an unnecessary check before the function call "dma_pool_destroy" 2016-09-09 16:08:45 +01:00
meson firmware: Amlogic: Add secure monitor driver 2016-09-01 14:23:39 -07:00
tegra firmware: tegra: Add BPMP support 2016-11-18 14:33:43 +01:00
arm_scpi.c firmware: arm_scpi: add missing of_node_put after calling of_parse_phandle 2016-08-08 14:31:09 +01:00
dcdbas.c dcdbas: Make use of smp_call_on_cpu() 2016-09-05 13:52:40 +02:00
dcdbas.h
dell_rbu.c
dmi_scan.c firmware: dmi_scan: Save SMBIOS Type 9 System Slots 2016-01-15 22:08:45 +01:00
dmi-id.c dmi-id: don't free dev structure after calling device_register 2016-09-08 10:35:50 +02:00
dmi-sysfs.c firmware: dmi_scan: add SBMIOS entry and DMI tables 2015-06-25 09:06:56 +02:00
edd.c [SCSI] edd: Treat "XPRS" host bus type the same as "PCI" 2011-10-31 13:26:19 +04:00
iscsi_ibft_find.c efi: Make 'efi_enabled' a function to query EFI facilities 2013-01-30 11:51:59 -08:00
iscsi_ibft.c ibft: Expose iBFT acpi header via sysfs 2016-05-16 11:14:29 -04:00
Kconfig drivers: psci: PSCI checker module 2016-11-25 23:25:52 +01:00
Makefile drivers: psci: PSCI checker module 2016-11-25 23:25:52 +01:00
memmap.c drivers/firmware/memmap.c: fix kernel-doc format 2015-06-25 17:00:41 -07:00
pcdp.c serial: 8250_early: Remove setup_early_serial8250_console() 2015-03-26 17:25:27 +01:00
pcdp.h
psci_checker.c drivers: psci: PSCI checker module 2016-11-25 23:25:52 +01:00
psci.c drivers: firmware: psci: initialise idle states using ACPI LPI 2016-07-21 23:29:38 +02:00
qcom_scm-32.c firmware: qcom: scm: Expose PAS command 10 as reset-controller 2016-06-24 22:53:52 -05:00
qcom_scm-64.c firmware: qcom: scm: Expose PAS command 10 as reset-controller 2016-06-24 22:53:52 -05:00
qcom_scm.c firmware: qcom: scm: Use devm_reset_controller_register() 2016-11-12 23:24:51 -06:00
qcom_scm.h firmware: qcom: scm: Expose PAS command 10 as reset-controller 2016-06-24 22:53:52 -05:00
qemu_fw_cfg.c driver core update for 4.7-rc1 2016-05-20 21:26:15 -07:00
raspberrypi.c ARM: bcm2835: Add the Raspberry Pi firmware driver 2015-10-14 15:30:06 -07:00
scpi_pm_domain.c firmware: scpi: add device power domain support using genpd 2016-06-21 10:26:51 +01:00