linux/drivers/thermal/thermal-generic-adc.c
Daniel Lezcano abda7383ec thermal: Remove debug or error messages in get_temp() ops
Some get_temp() ops implementation are showing an error or a debug
message if the reading of the sensor fails.

The debug message is already displayed from the call site of this
ops. So we can remove it.

On the other side, the error should not be displayed because in
production that can raise tons of messages.

Finally, some drivers are showing a debug message with the
temperature, this is also accessible through the trace from the core
code in the temperature_update() function.

Another benefit is the dev_* messages are accessing the thermal zone
device field from the structure, so we encapsulate even more the code
by preventing these accesses.

Remove those messages.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> #Armada
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #brcmstb_thermal.c
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03 20:45:02 +01:00

178 lines
4.1 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Generic ADC thermal driver
*
* Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
*
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*/
#include <linux/iio/consumer.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/thermal.h>
struct gadc_thermal_info {
struct device *dev;
struct thermal_zone_device *tz_dev;
struct iio_channel *channel;
s32 *lookup_table;
int nlookup_table;
};
static int gadc_thermal_adc_to_temp(struct gadc_thermal_info *gti, int val)
{
int temp, temp_hi, temp_lo, adc_hi, adc_lo;
int i;
if (!gti->lookup_table)
return val;
for (i = 0; i < gti->nlookup_table; i++) {
if (val >= gti->lookup_table[2 * i + 1])
break;
}
if (i == 0) {
temp = gti->lookup_table[0];
} else if (i >= gti->nlookup_table) {
temp = gti->lookup_table[2 * (gti->nlookup_table - 1)];
} else {
adc_hi = gti->lookup_table[2 * i - 1];
adc_lo = gti->lookup_table[2 * i + 1];
temp_hi = gti->lookup_table[2 * i - 2];
temp_lo = gti->lookup_table[2 * i];
temp = temp_hi + mult_frac(temp_lo - temp_hi, val - adc_hi,
adc_lo - adc_hi);
}
return temp;
}
static int gadc_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
{
struct gadc_thermal_info *gti = thermal_zone_device_priv(tz);
int val;
int ret;
ret = iio_read_channel_processed(gti->channel, &val);
if (ret < 0)
return ret;
*temp = gadc_thermal_adc_to_temp(gti, val);
return 0;
}
static const struct thermal_zone_device_ops gadc_thermal_ops = {
.get_temp = gadc_thermal_get_temp,
};
static int gadc_thermal_read_linear_lookup_table(struct device *dev,
struct gadc_thermal_info *gti)
{
struct device_node *np = dev->of_node;
enum iio_chan_type chan_type;
int ntable;
int ret;
ntable = of_property_count_elems_of_size(np, "temperature-lookup-table",
sizeof(u32));
if (ntable <= 0) {
ret = iio_get_channel_type(gti->channel, &chan_type);
if (ret || chan_type != IIO_TEMP)
dev_notice(dev,
"no lookup table, assuming DAC channel returns milliCelcius\n");
return 0;
}
if (ntable % 2) {
dev_err(dev, "Pair of temperature vs ADC read value missing\n");
return -EINVAL;
}
gti->lookup_table = devm_kcalloc(dev,
ntable, sizeof(*gti->lookup_table),
GFP_KERNEL);
if (!gti->lookup_table)
return -ENOMEM;
ret = of_property_read_u32_array(np, "temperature-lookup-table",
(u32 *)gti->lookup_table, ntable);
if (ret < 0) {
dev_err(dev, "Failed to read temperature lookup table: %d\n",
ret);
return ret;
}
gti->nlookup_table = ntable / 2;
return 0;
}
static int gadc_thermal_probe(struct platform_device *pdev)
{
struct gadc_thermal_info *gti;
int ret;
if (!pdev->dev.of_node) {
dev_err(&pdev->dev, "Only DT based supported\n");
return -ENODEV;
}
gti = devm_kzalloc(&pdev->dev, sizeof(*gti), GFP_KERNEL);
if (!gti)
return -ENOMEM;
gti->channel = devm_iio_channel_get(&pdev->dev, "sensor-channel");
if (IS_ERR(gti->channel)) {
ret = PTR_ERR(gti->channel);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev, "IIO channel not found: %d\n", ret);
return ret;
}
ret = gadc_thermal_read_linear_lookup_table(&pdev->dev, gti);
if (ret < 0)
return ret;
gti->dev = &pdev->dev;
platform_set_drvdata(pdev, gti);
gti->tz_dev = devm_thermal_of_zone_register(&pdev->dev, 0, gti,
&gadc_thermal_ops);
if (IS_ERR(gti->tz_dev)) {
ret = PTR_ERR(gti->tz_dev);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"Thermal zone sensor register failed: %d\n",
ret);
return ret;
}
return 0;
}
static const struct of_device_id of_adc_thermal_match[] = {
{ .compatible = "generic-adc-thermal", },
{},
};
MODULE_DEVICE_TABLE(of, of_adc_thermal_match);
static struct platform_driver gadc_thermal_driver = {
.driver = {
.name = "generic-adc-thermal",
.of_match_table = of_adc_thermal_match,
},
.probe = gadc_thermal_probe,
};
module_platform_driver(gadc_thermal_driver);
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
MODULE_DESCRIPTION("Generic ADC thermal driver using IIO framework with DT");
MODULE_LICENSE("GPL v2");