linux/drivers/scsi/arm/fas216.h
Russell King 5d61b718ec SCSI: arm fas216: fix missing ';'
f281233 (SCSI host lock push-down) broke the fas216 build:

drivers/scsi/arm/fas216.h: In function 'fas216_noqueue_command':
drivers/scsi/arm/fas216.h:354: error: storage class specified for parameter 'fas216_intr'
drivers/scsi/arm/fas216.h:356: error: storage class specified for parameter 'fas216_remove'
...

Fix it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-23 22:26:23 +00:00

398 lines
14 KiB
C

/*
* linux/drivers/acorn/scsi/fas216.h
*
* Copyright (C) 1997-2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* FAS216 generic driver
*/
#ifndef FAS216_H
#define FAS216_H
#ifndef NO_IRQ
#define NO_IRQ 255
#endif
#include <scsi/scsi_eh.h>
#include "queue.h"
#include "msgqueue.h"
/* FAS register definitions */
/* transfer count low */
#define REG_CTCL (0)
#define REG_STCL (0)
/* transfer count medium */
#define REG_CTCM (1)
#define REG_STCM (1)
/* fifo data */
#define REG_FF (2)
/* command */
#define REG_CMD (3)
#define CMD_NOP 0x00
#define CMD_FLUSHFIFO 0x01
#define CMD_RESETCHIP 0x02
#define CMD_RESETSCSI 0x03
#define CMD_TRANSFERINFO 0x10
#define CMD_INITCMDCOMPLETE 0x11
#define CMD_MSGACCEPTED 0x12
#define CMD_PADBYTES 0x18
#define CMD_SETATN 0x1a
#define CMD_RSETATN 0x1b
#define CMD_SELECTWOATN 0x41
#define CMD_SELECTATN 0x42
#define CMD_SELECTATNSTOP 0x43
#define CMD_ENABLESEL 0x44
#define CMD_DISABLESEL 0x45
#define CMD_SELECTATN3 0x46
#define CMD_RESEL3 0x47
#define CMD_WITHDMA 0x80
/* status register (read) */
#define REG_STAT (4)
#define STAT_IO (1 << 0) /* IO phase */
#define STAT_CD (1 << 1) /* CD phase */
#define STAT_MSG (1 << 2) /* MSG phase */
#define STAT_TRANSFERDONE (1 << 3) /* Transfer completed */
#define STAT_TRANSFERCNTZ (1 << 4) /* Transfer counter is zero */
#define STAT_PARITYERROR (1 << 5) /* Parity error */
#define STAT_REALBAD (1 << 6) /* Something bad */
#define STAT_INT (1 << 7) /* Interrupt */
#define STAT_BUSMASK (STAT_MSG|STAT_CD|STAT_IO)
#define STAT_DATAOUT (0) /* Data out */
#define STAT_DATAIN (STAT_IO) /* Data in */
#define STAT_COMMAND (STAT_CD) /* Command out */
#define STAT_STATUS (STAT_CD|STAT_IO) /* Status In */
#define STAT_MESGOUT (STAT_MSG|STAT_CD) /* Message out */
#define STAT_MESGIN (STAT_MSG|STAT_CD|STAT_IO) /* Message In */
/* bus ID for select / reselect */
#define REG_SDID (4)
#define BUSID(target) ((target) & 7)
/* Interrupt status register (read) */
#define REG_INST (5)
#define INST_SELWOATN (1 << 0) /* Select w/o ATN */
#define INST_SELATN (1 << 1) /* Select w/ATN */
#define INST_RESELECTED (1 << 2) /* Reselected */
#define INST_FUNCDONE (1 << 3) /* Function done */
#define INST_BUSSERVICE (1 << 4) /* Bus service */
#define INST_DISCONNECT (1 << 5) /* Disconnect */
#define INST_ILLEGALCMD (1 << 6) /* Illegal command */
#define INST_BUSRESET (1 << 7) /* SCSI Bus reset */
/* Timeout register (write) */
#define REG_STIM (5)
/* Sequence step register (read) */
#define REG_IS (6)
#define IS_BITS 0x07
#define IS_SELARB 0x00 /* Select & Arb ok */
#define IS_MSGBYTESENT 0x01 /* One byte message sent*/
#define IS_NOTCOMMAND 0x02 /* Not in command state */
#define IS_EARLYPHASE 0x03 /* Early phase change */
#define IS_COMPLETE 0x04 /* Command ok */
#define IS_SOF 0x08 /* Sync off flag */
/* Transfer period step (write) */
#define REG_STP (6)
/* Synchronous Offset (write) */
#define REG_SOF (7)
/* Fifo state register (read) */
#define REG_CFIS (7)
#define CFIS_CF 0x1f /* Num bytes in FIFO */
#define CFIS_IS 0xe0 /* Step */
/* config register 1 */
#define REG_CNTL1 (8)
#define CNTL1_CID (7 << 0) /* Chip ID */
#define CNTL1_STE (1 << 3) /* Self test enable */
#define CNTL1_PERE (1 << 4) /* Parity enable reporting en. */
#define CNTL1_PTE (1 << 5) /* Parity test enable */
#define CNTL1_DISR (1 << 6) /* Disable Irq on SCSI reset */
#define CNTL1_ETM (1 << 7) /* Extended Timing Mode */
/* Clock conversion factor (read) */
#define REG_CLKF (9)
#define CLKF_F37MHZ 0x00 /* 35.01 - 40 MHz */
#define CLKF_F10MHZ 0x02 /* 10 MHz */
#define CLKF_F12MHZ 0x03 /* 10.01 - 15 MHz */
#define CLKF_F17MHZ 0x04 /* 15.01 - 20 MHz */
#define CLKF_F22MHZ 0x05 /* 20.01 - 25 MHz */
#define CLKF_F27MHZ 0x06 /* 25.01 - 30 MHz */
#define CLKF_F32MHZ 0x07 /* 30.01 - 35 MHz */
/* Chip test register (write) */
#define REG_FTM (10)
#define TEST_FTM 0x01 /* Force target mode */
#define TEST_FIM 0x02 /* Force initiator mode */
#define TEST_FHI 0x04 /* Force high impedance mode */
/* Configuration register 2 (read/write) */
#define REG_CNTL2 (11)
#define CNTL2_PGDP (1 << 0) /* Pass Th/Generate Data Parity */
#define CNTL2_PGRP (1 << 1) /* Pass Th/Generate Reg Parity */
#define CNTL2_ACDPE (1 << 2) /* Abort on Cmd/Data Parity Err */
#define CNTL2_S2FE (1 << 3) /* SCSI2 Features Enable */
#define CNTL2_TSDR (1 << 4) /* Tristate DREQ */
#define CNTL2_SBO (1 << 5) /* Select Byte Order */
#define CNTL2_ENF (1 << 6) /* Enable features */
#define CNTL2_DAE (1 << 7) /* Data Alignment Enable */
/* Configuration register 3 (read/write) */
#define REG_CNTL3 (12)
#define CNTL3_BS8 (1 << 0) /* Burst size 8 */
#define CNTL3_MDM (1 << 1) /* Modify DMA mode */
#define CNTL3_LBTM (1 << 2) /* Last Byte Transfer mode */
#define CNTL3_FASTCLK (1 << 3) /* Fast SCSI clocking */
#define CNTL3_FASTSCSI (1 << 4) /* Fast SCSI */
#define CNTL3_G2CB (1 << 5) /* Group2 SCSI support */
#define CNTL3_QTAG (1 << 6) /* Enable 3 byte msgs */
#define CNTL3_ADIDCHK (1 << 7) /* Additional ID check */
/* High transfer count (read/write) */
#define REG_CTCH (14)
#define REG_STCH (14)
/* ID register (read only) */
#define REG_ID (14)
/* Data alignment */
#define REG_DAL (15)
typedef enum {
PHASE_IDLE, /* we're not planning on doing anything */
PHASE_SELECTION, /* selecting a device */
PHASE_SELSTEPS, /* selection with command steps */
PHASE_COMMAND, /* command sent */
PHASE_MESSAGESENT, /* selected, and we're sending cmd */
PHASE_DATAOUT, /* data out to device */
PHASE_DATAIN, /* data in from device */
PHASE_MSGIN, /* message in from device */
PHASE_MSGIN_DISCONNECT, /* disconnecting from bus */
PHASE_MSGOUT, /* after message out phase */
PHASE_MSGOUT_EXPECT, /* expecting message out */
PHASE_STATUS, /* status from device */
PHASE_DONE /* Command complete */
} phase_t;
typedef enum {
DMA_OUT, /* DMA from memory to chip */
DMA_IN /* DMA from chip to memory */
} fasdmadir_t;
typedef enum {
fasdma_none, /* No dma */
fasdma_pio, /* PIO mode */
fasdma_pseudo, /* Pseudo DMA */
fasdma_real_block, /* Real DMA, on block by block basis */
fasdma_real_all /* Real DMA, on request by request */
} fasdmatype_t;
typedef enum {
neg_wait, /* Negociate with device */
neg_inprogress, /* Negociation sent */
neg_complete, /* Negociation complete */
neg_targcomplete, /* Target completed negociation */
neg_invalid /* Negociation not supported */
} neg_t;
#define MAGIC 0x441296bdUL
#define NR_MSGS 8
#define FASCAP_DMA (1 << 0)
#define FASCAP_PSEUDODMA (1 << 1)
typedef struct {
unsigned long magic_start;
spinlock_t host_lock;
struct Scsi_Host *host; /* host */
struct scsi_cmnd *SCpnt; /* currently processing command */
struct scsi_cmnd *origSCpnt; /* original connecting command */
struct scsi_cmnd *reqSCpnt; /* request sense command */
struct scsi_cmnd *rstSCpnt; /* reset command */
struct scsi_cmnd *pending_SCpnt[8]; /* per-device pending commands */
int next_pending; /* next pending device */
/*
* Error recovery
*/
wait_queue_head_t eh_wait;
struct timer_list eh_timer;
unsigned int rst_dev_status;
unsigned int rst_bus_status;
/* driver information */
struct {
phase_t phase; /* current phase */
void __iomem *io_base; /* iomem base of FAS216 */
unsigned int io_shift; /* shift to adjust reg offsets by */
unsigned char cfg[4]; /* configuration registers */
const char *type; /* chip type */
unsigned int irq; /* interrupt */
int dma; /* dma channel */
struct scsi_pointer SCp; /* current commands data pointer */
MsgQueue_t msgs; /* message queue for connected device */
unsigned int async_stp; /* Async transfer STP value */
unsigned char msgin_fifo; /* bytes in fifo at time of message in */
unsigned char message[256]; /* last message received from device */
unsigned char disconnectable:1; /* this command can be disconnected */
unsigned char aborting:1; /* aborting command */
} scsi;
/* statistics information */
struct {
unsigned int queues;
unsigned int removes;
unsigned int fins;
unsigned int reads;
unsigned int writes;
unsigned int miscs;
unsigned int disconnects;
unsigned int aborts;
unsigned int bus_resets;
unsigned int host_resets;
} stats;
/* configuration information */
struct {
unsigned char clockrate; /* clock rate of FAS device (MHz) */
unsigned char select_timeout; /* timeout (R5) */
unsigned char sync_max_depth; /* Synchronous xfer max fifo depth */
unsigned char wide_max_size; /* Maximum wide transfer size */
unsigned char cntl3; /* Control Reg 3 */
unsigned int asyncperiod; /* Async transfer period (ns) */
unsigned int capabilities; /* driver capabilities */
unsigned int disconnect_ok:1; /* Disconnects allowed? */
} ifcfg;
/* queue handling */
struct {
Queue_t issue; /* issue queue */
Queue_t disconnected; /* disconnected command queue */
} queues;
/* per-device info */
struct fas216_device {
unsigned char disconnect_ok:1; /* device can disconnect */
unsigned char parity_enabled:1; /* parity checking enabled */
unsigned char parity_check:1; /* need to check parity checking */
unsigned char period; /* sync xfer period in (*4ns) */
unsigned char stp; /* synchronous transfer period */
unsigned char sof; /* synchronous offset register */
unsigned char wide_xfer; /* currently negociated wide transfer */
neg_t sync_state; /* synchronous transfer mode */
neg_t wide_state; /* wide transfer mode */
} device[8];
unsigned long busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy */
/* dma */
struct {
fasdmatype_t transfer_type; /* current type of DMA transfer */
fasdmatype_t (*setup) (struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma);
void (*pseudo)(struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, int transfer);
void (*stop) (struct Scsi_Host *host, struct scsi_pointer *SCp);
} dma;
/* miscellaneous */
int internal_done; /* flag to indicate request done */
struct scsi_eh_save ses; /* holds request sense restore info */
unsigned long magic_end;
} FAS216_Info;
/* Function: int fas216_init (struct Scsi_Host *instance)
* Purpose : initialise FAS/NCR/AMD SCSI structures.
* Params : instance - a driver-specific filled-out structure
* Returns : 0 on success
*/
extern int fas216_init (struct Scsi_Host *instance);
/* Function: int fas216_add (struct Scsi_Host *instance, struct device *dev)
* Purpose : initialise FAS/NCR/AMD SCSI ic.
* Params : instance - a driver-specific filled-out structure
* Returns : 0 on success
*/
extern int fas216_add (struct Scsi_Host *instance, struct device *dev);
/* Function: int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
* Purpose : queue a command for adapter to process.
* Params : h - host adapter
* : SCpnt - Command to queue
* Returns : 0 - success, else error
*/
extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);
/* Function: int fas216_noqueue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
* Purpose : queue a command for adapter to process, and process it to completion.
* Params : h - host adapter
* : SCpnt - Command to queue
* Returns : 0 - success, else error
*/
extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *);
/* Function: irqreturn_t fas216_intr (FAS216_Info *info)
* Purpose : handle interrupts from the interface to progress a command
* Params : info - interface to service
*/
extern irqreturn_t fas216_intr (FAS216_Info *info);
extern void fas216_remove (struct Scsi_Host *instance);
/* Function: void fas216_release (struct Scsi_Host *instance)
* Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic.
* Params : instance - a driver-specific filled-out structure
* Returns : 0 on success
*/
extern void fas216_release (struct Scsi_Host *instance);
extern int fas216_print_host(FAS216_Info *info, char *buffer);
extern int fas216_print_stats(FAS216_Info *info, char *buffer);
extern int fas216_print_devices(FAS216_Info *info, char *buffer);
/* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt)
* Purpose : abort this command
* Params : SCpnt - command to abort
* Returns : FAILED if unable to abort
*/
extern int fas216_eh_abort(struct scsi_cmnd *SCpnt);
/* Function: int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
* Purpose : Reset the device associated with this command
* Params : SCpnt - command specifing device to reset
* Returns : FAILED if unable to reset
*/
extern int fas216_eh_device_reset(struct scsi_cmnd *SCpnt);
/* Function: int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt)
* Purpose : Reset the complete bus associated with this command
* Params : SCpnt - command specifing bus to reset
* Returns : FAILED if unable to reset
*/
extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt);
/* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
* Purpose : Reset the host associated with this command
* Params : SCpnt - command specifing host to reset
* Returns : FAILED if unable to reset
*/
extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt);
#endif /* FAS216_H */