linux/arch/arm
Mark Brown e9c08f0d57 ARM: S3C64XX: Redo voltage ranges for cpufreq
The documentation for the S3C6410 CPU voltage scaling is rather
unclear, with omitted values for several speed settings. Originally
the code was using only quoted values, resulting in some fairly odd
settings. The S3C6410 is also unusual in that the both the maximum
and minimum voltages quoted scale as the frequency rises, rather
than just the minimum voltage.

Clean this up a bit by always using the specified typical settings
as the minimum voltage (ignoring any specified minimum voltage) in
order to avoid running near the edge of the processor capabilities.
Also use the next quoted maximum voltages rather than the typical
voltages where no maximum voltage is quoted, allowing operation on
a greater range of systems.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:35:39 +00:00
..
boot kbuild: use INSTALLKERNEL to select customized installkernel script 2009-09-20 12:18:14 +02:00
common ARM: 5735/1: sa1111: CodingStyle cleanups 2009-10-02 22:32:33 +01:00
configs Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2009-11-12 14:57:15 -08:00
include/asm ARM: Use a definition for the userspace cmpxchg emulation syscall 2009-11-10 08:41:12 +00:00
kernel Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 2009-11-10 23:37:21 +00:00
lib Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 2009-09-19 13:47:57 +01:00
mach-aaec2000
mach-at91 at91: at91sam9g45 family: identify several chip versions 2009-11-03 18:42:31 +01:00
mach-bcmring ARM: 5748/1: bcmring: fix build warning messages 2009-10-07 13:13:01 +01:00
mach-clps711x
mach-davinci ARM: includecheck fix: mach-davinci, board-dm365-evm.c 2009-09-28 18:06:20 +01:00
mach-ebsa110
mach-ep93xx ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function __raw_readl and IOMEM 2009-11-05 20:20:56 +00:00
mach-footbridge
mach-gemini
mach-h720x
mach-integrator ARM: integrator: allow Integrator to be built with highmem 2009-10-25 22:44:30 +00:00
mach-iop13xx Merge branch 'iop-raid6' into async-tx-next 2009-09-08 17:53:57 -07:00
mach-iop32x iop3xx: ATU and PCI memory configuration corrected 2009-08-18 13:48:35 -07:00
mach-iop33x iop3xx: ATU and PCI memory configuration corrected 2009-08-18 13:48:35 -07:00
mach-ixp4xx ixp4xx: arch_idle() documentation fixup 2009-09-21 19:20:03 +02:00
mach-ixp23xx
mach-ixp2000
mach-kirkwood [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction 2009-11-07 20:18:24 -05:00
mach-ks8695 ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c 2009-11-05 20:21:25 +00:00
mach-l7200
mach-lh7a40x
mach-loki
mach-mmp
mach-msm
mach-mv78xx0 [ARM] properly report mv78100 stepping A1 2009-11-05 23:03:19 -05:00
mach-mx1
mach-mx2 MXC: fix reset for mx31, mx35 and mx27 SoCs 2009-10-13 10:24:10 +02:00
mach-mx3 MXC: fix reset for mx31, mx35 and mx27 SoCs 2009-10-13 10:24:10 +02:00
mach-mx25 mx25: Add missing copyright / license header 2009-10-02 09:14:18 +02:00
mach-mxc91231 MXC: add iomux pins configuration support for MXC91231 2009-08-14 12:40:47 +02:00
mach-netx
mach-nomadik mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board) 2009-09-20 06:00:27 -07:00
mach-ns9xxx const: constify remaining file_operations 2009-10-01 16:11:11 -07:00
mach-omap1 omap1: Fix DSP public peripherals support for ams-delta 2009-10-22 14:47:42 -07:00
mach-omap2 omap3: beagle: Fix USB host port power control 2009-11-11 11:04:09 -08:00
mach-orion5x [ARM] orion5x: Add LaCie NAS 2Big Network support 2009-09-08 14:10:35 -04:00
mach-pnx4008
mach-pxa [ARM] pxa: fix resume failure by saving/restoring IPRx registers 2009-11-03 12:00:56 +08:00
mach-realview RealView: Add sparsemem support for the RealView PBX platform 2009-11-05 10:10:36 +00:00
mach-rpc
mach-s3c24a0/include/mach
mach-s3c2400
mach-s3c2410 ARM: H1940: Convert h1940 bluetooth driver to rfkill 2009-12-01 01:35:06 +00:00
mach-s3c2412 ARM: S3C: Add NAND device platform data set call 2009-12-01 01:34:16 +00:00
mach-s3c2440 ARM: AT2440EVB: Remove duplicated s3c_device_sdi.name set 2009-12-01 01:34:17 +00:00
mach-s3c2442 ARM: S3C: Add NAND device platform data set call 2009-12-01 01:34:16 +00:00
mach-s3c2443
mach-s3c6400 ARM: S3C64XX: Tidy definition and comments in s3c_dma_has_circular() 2009-11-09 23:45:47 +00:00
mach-s3c6410 ARM: SMDK6410: Hook up regulator supplies for WM8580 2009-12-01 01:35:37 +00:00
mach-s5pc100 ARM: S5PC100: Board and configuration file 2009-08-16 23:40:39 +01:00
mach-sa1100 ARM: 5752/1: SA1100: fix building of h3100 2009-10-07 13:13:01 +01:00
mach-shark
mach-stmp37xx
mach-stmp378x
mach-u300 ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3 2009-10-01 16:26:15 +01:00
mach-versatile ARM: 5720/1: Move MMCI header to amba include dir 2009-09-22 20:49:04 +01:00
mach-w90x900 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2009-09-14 17:56:51 -07:00
mm ARMv7: Check whether the SMP/nAMP mode was already enabled 2009-11-04 12:19:22 +00:00
nwfpe
oprofile ARM: 5764/1: bcmring: add oprofile pmu support 2009-10-17 20:10:22 +01:00
plat-iop Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop 2009-10-02 22:31:04 +01:00
plat-mxc spi: add SPI driver for most known i.MX SoCs 2009-09-23 07:39:43 -07:00
plat-omap omap3: Decrease cpufreq transition latency 2009-11-11 14:59:09 -08:00
plat-orion [ARM] Kirkwood: __init requires linux/init.h 2009-08-24 11:55:59 -04:00
plat-pxa [ARM] pxa/dma: add debugfs entries 2009-09-10 18:49:29 +08:00
plat-s3c ARM: S3C: Add NAND device platform data set call 2009-12-01 01:34:16 +00:00
plat-s3c24xx ARM: S3C: Add NAND device platform data set call 2009-12-01 01:34:16 +00:00
plat-s3c64xx ARM: S3C64XX: Redo voltage ranges for cpufreq 2009-12-01 01:35:39 +00:00
plat-s5pc1xx ARM: S5PC100: Kconfigs and Makefiles 2009-08-16 23:35:19 +01:00
plat-samsung ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves 2009-12-01 01:28:37 +00:00
plat-stmp3xxx ARM: STMP3xxx: deallocation with negative index of descriptors[] 2009-09-19 12:14:05 +01:00
tools [ARM] Update mach-types 2009-09-18 21:42:01 +01:00
vfp
Kconfig ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves 2009-12-01 01:28:37 +00:00
Kconfig-nommu
Kconfig.debug
Makefile ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves 2009-12-01 01:28:37 +00:00